871 VPN outside the conection problem
I have a router Cisco 871, which must be configured to allow outside laptops to connect to the corporate network.
I used Easy VPN ServerWizard in CCP to create the configuration.
After the use of VPN test, everything looks OK.
Unfortunatlly I can not connect hollow VPN using the Microsoft VPN (Error 800) connection or VPN Cisco Client.
Error 412: the remote peer is not responding.
Any suggestions?
Patryk,
If you want to connect by using the windows VPN client, you can define PPTP on the router and optional MPPE encryption.
Here's a good link:
http://www.Cisco.com/en/us/Tech/tk827/tk369/technologies_configuration_example09186a00801e51e2.shtml
Federico.
Tags: Cisco Security
Similar Questions
-
Coming out of the IPSec VPN connection behind Pix535 problem: narrowed down for NAT-Associates
Hello world
Previously, I've seen a similar thread and posted my troubles with the outbound VPN connections inside that thread:
https://supportforums.Cisco.com/message/3688980#3688980
I had the great help but unfortunatedly my problem is a little different and connection problem. Here, I summarize once again our configurations:
hostname pix535 8.0 (4)
all PC here use IP private such as 10.1.0.0/16 by dynamic NAT, we cannot initiate an OUTBOUND IPSec VPN (for example QuickVPN) at our offices, but the reverse (inbound) is very well (we have IPsec working long server /PP2P). I did a few tests of new yesterday which showed that if the PC a static NAT (mapped to a real public IP), outgoing connection VPN is fine; If the same PC has no static NAT (he hides behind the dynamic NAT firewall), outgoing VPN is a no-go (same IP to the same PC), so roughly, I have narrowed down our connection problem VPN is related to NAT, here are a few commands for NAT of our PIX:
interface GigabitEthernet0
Description to cable-modem
nameif outside
security-level 0
IP 70.169.X.X 255.255.255.0
OSPF cost 10
!
interface GigabitEthernet1
Description inside 10/16
nameif inside
security-level 100
IP 10.1.1.254 255.255.0.0
OSPF cost 10
!
!
interface Ethernet2
Vlan30 description
nameif dmz2
security-level 50
IP 30.30.30.30 255.255.255.0
OSPF cost 10
!
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface......
Global interface 10 (external)
Global (dmz2) interface 10
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 10 inside8 255.255.255.0
NAT (inside) 10 Vlan10 255.255.255.0
NAT (inside) 10 vlan50 255.255.255.0
NAT (inside) 10 192.168.0.0 255.255.255.0
NAT (inside) 10 192.168.1.0 255.255.255.0
NAT (inside) 10 192.168.10.0 255.255.255.0
NAT (inside) 10 pix-inside 255.255.0.0Crypto isakmp nat-traversal 3600
-------
Results of packet capture are listed here for the same PC for the same traffic to Server VPN brach, the main difference is UDP 4500 (PC with static NAT has good traffic UDP 4500, does not have the same PC with dynamic NAT):
#1: when the PC uses static NAT, it is good of outgoing VPN:
54 packets captured
1: 15:43:51.112054 10.1.1.82.1608 > 76.196.10.57.443: S 1763806634:1763806634 (0) win 64240
2: 15:43:54.143028 10.1.1.82.1608 > 76.196.10.57.443: S 1763806634:1763806634 (0) win 64240
3: 15:44:00.217273 10.1.1.82.1608 > 76.196.10.57.443: S 1763806634:1763806634 (0) win 64240
4: 15:44:01.724938 10.1.1.82.1609 > 76.196.10.57.60443: S 2904546955:2904546955 (0) win 64240
5: 15:44:01.784642 76.196.10.57.60443 > 10.1.1.82.1609: S 2323205974:2323205974 (0) ack 2904546956 win 5808
6: 15:44:01.784886 10.1.1.82.1609 > 76.196.10.57.60443:. ACK 2323205975 win 64240
7: 15:44:01.785527 10.1.1.82.1609 > 76.196.10.57.60443: P 2904546956:2904547080 (124) ack 2323205975 win 64240
8: 15:44:01.856462 76.196.10.57.60443 > 10.1.1.82.1609:. ACK 2904547080 win 5808
9: 15:44:01.899596 76.196.10.57.60443 > 10.1.1.82.1609: P 2323205975:2323206638 (663) ack 2904547080 win 5808
10: 15:44:02.056897 10.1.1.82.1609 > 76.196.10.57.60443:. ACK 2323206638 win 63577
11: 15:44:03.495030 10.1.1.82.1609 > 76.196.10.57.60443: P 2904547080:2904547278 (198) ack 2323206638 win 63577
12: 15:44:03.667095 76.196.10.57.60443 > 10.1.1.82.1609:. ACK 2904547278 win 6432
13: 15:44:03.740592 76.196.10.57.60443 > 10.1.1.82.1609: P 2323206638:2323206697 (59) ack 2904547278 win 6432
14: 15:44:03.741264 10.1.1.82.1609 > 76.196.10.57.60443: P 2904547278:2904547576 (298) ack 2323206697 win 63518
15: 15:44:03.814029 76.196.10.57.60443 > 10.1.1.82.1609:. ACK 2904547576 win 7504
16: 15:44:06.989008 76.196.10.57.60443 > 10.1.1.82.1609: P 2323206697:2323207075 (378) ack 2904547576 win 7504
17: 15:44:06.990228 76.196.10.57.60443 > 10.1.1.82.1609: 2323207075:2323207075 F (0) ack 2904547576 win 7504
18: 15:44:06.990564 10.1.1.82.1609 > 76.196.10.57.60443:. ACK 2323207076 win 63140
19: 15:44:06.990656 10.1.1.82.1609 > 76.196.10.57.60443: P 2904547576:2904547613 (37) ack 2323207076 win 63140
20: 15:44:06.990854 10.1.1.82.1609 > 76.196.10.57.60443: 2904547613:2904547613 F (0) ack 2323207076 win 63140
21: 15:44:07.049359 76.196.10.57.60443 > 10.1.1.82.1609: R 2323207076:2323207076 (0) win 0
22: 15:44:17.055417 10.1.1.82.500 > 76.196.10.57.500: udp 276
23: 15:44:17.137657 76.196.10.57.500 > 10.1.1.82.500: udp 140
24: 15:44:17.161475 10.1.1.82.500 > 76.196.10.57.500: udp 224
25: 15:44:17.309066 76.196.10.57.500 > 10.1.1.82.500: udp 220
26: 15:44:17.478780 10.1.1.82.4500 > 76.196.10.57.4500: udp 80
27: 15:44:17.550356 76.196.10.57.4500 > 10.1.1.82.4500: 64 udp
28: 15:44:17.595214 10.1.1.82.4500 > 76.196.10.57.4500: udp 304
29: 15:44:17.753470 76.196.10.57.4500 > 10.1.1.82.4500: udp 304
30: 15:44:17.763037 10.1.1.82.4500 > 76.196.10.57.4500: udp 68
31: 15:44:17.763540 10.1.1.82.4500 > 76.196.10.57.4500: udp 56
32: 15:44:18.054516 10.1.1.82.4500 > 76.196.10.57.4500: udp 68
33: 15:44:18.124840 76.196.10.57.4500 > 10.1.1.82.4500: udp 68
34: 15:44:21.835390 10.1.1.82.4500 > 76.196.10.57.4500: udp 72
35: 15:44:21.850831 10.1.1.82.4500 > 76.196.10.57.4500: udp 80
36: 15:44:21.901183 76.196.10.57.4500 > 10.1.1.82.4500: udp 72
37: 15:44:22.063747 10.1.1.82.1610 > 76.196.10.57.60443: S 938188365:938188365 (0) win 64240
38: 15:44:22.104746 76.196.10.57.4500 > 10.1.1.82.4500: udp 80
39: 15:44:22.122277 76.196.10.57.60443 > 10.1.1.82.1610: S 1440820945:1440820945 (0) ack 938188366 win 5808
40: 15:44:22.122536 10.1.1.82.1610 > 76.196.10.57.60443:. ACK 1440820946 win 64240
41: 15:44:22.123269 10.1.1.82.1610 > 76.196.10.57.60443: P 938188366:938188490 (124) ack 1440820946 win 64240
42: 15:44:22.187108 76.196.10.57.60443 > 10.1.1.82.1610:. ACK 938188490 win 5808
43: 15:44:22.400675 76.196.10.57.60443 > 10.1.1.82.1610: P 1440820946:1440821609 (663) ack 938188490 win 5808
44: 15:44:22.474600 10.1.1.82.1610 > 76.196.10.57.60443: P 938188490:938188688 (198) ack 1440821609 win 63577
45: 15:44:22.533648 76.196.10.57.60443 > 10.1.1.82.1610:. ACK 938188688 win 6432
46: 15:44:22.742286 76.196.10.57.60443 > 10.1.1.82.1610: P 1440821609:1440821668 (59) ack 938188688 win 6432
47: 15:44:22.742927 10.1.1.82.1610 > 76.196.10.57.60443: P 938188688:938189002 (314) ack 1440821668 win 63518
48: 15:44:22.802570 76.196.10.57.60443 > 10.1.1.82.1610:. ACK 938189002 win 7504
49: 15:44:25.180486 76.196.10.57.60443 > 10.1.1.82.1610: P 1440821668:1440821934 (266) ack 938189002 win 7504
50: 15:44:25.181753 76.196.10.57.60443 > 10.1.1.82.1610: 1440821934:1440821934 F (0) ack 938189002 win 7504
51: 15:44:25.181997 10.1.1.82.1610 > 76.196.10.57.60443:. ACK 1440821935 win 63252
52: 15:44:25.182134 10.1.1.82.1610 > 76.196.10.57.60443: P 938189002:938189039 (37) ack 1440821935 win 63252
53: 15:44:25.182333 10.1.1.82.1610 > 76.196.10.57.60443: 938189039:938189039 F (0) ack 1440821935 win 63252
54: 15:44:25.241869 76.196.10.57.60443 > 10.1.1.82.1610: R 1440821935:1440821935 (0) win 0#2: same PC with Dynamic NAT, VPN connection fails:
70 packets captured
1: 14:08:31.758261 10.1.1.82.1073 > 76.196.10.57.443: S 820187495:820187495 (0) win 64240
2: 14:08:34.876907 10.1.1.82.1073 > 76.196.10.57.443: S 820187495:820187495 (0) win 64240
3: 14:08:40.746055 10.1.1.82.1073 > 76.196.10.57.443: S 820187495:820187495 (0) win 64240
4: 14:08:42.048627 10.1.1.82.1074 > 76.196.10.57.60443: S 3309127022:3309127022 (0) win 64240
5: 14:08:42.120248 76.196.10.57.60443 > 10.1.1.82.1074: S 1715577781:1715577781 (0) ack 3309127023 win 5808
6: 14:08:42.120568 10.1.1.82.1074 > 76.196.10.57.60443:. ACK 1715577782 win 64240
7: 14:08:42.121102 10.1.1.82.1074 > 76.196.10.57.60443: P 3309127023:3309127147 (124) ack 1715577782 win 64240
8: 14:08:42.183553 76.196.10.57.60443 > 10.1.1.82.1074:. ACK 3309127147 win 5808
9: 14:08:42.232867 76.196.10.57.60443 > 10.1.1.82.1074: P 1715577782:1715578445 (663) ack 3309127147 win 5808
10: 14:08:42.405145 10.1.1.82.1074 > 76.196.10.57.60443:. ACK 1715578445 win 63577
11: 14:08:43.791340 10.1.1.82.1074 > 76.196.10.57.60443: P 3309127147:3309127345 (198) ack 1715578445 win 63577
12: 14:08:43.850450 76.196.10.57.60443 > 10.1.1.82.1074:. ACK 3309127345 win 6432
13: 14:08:44.028196 76.196.10.57.60443 > 10.1.1.82.1074: P 1715578445:1715578504 (59) ack 3309127345 win 6432
14: 14:08:44.058544 10.1.1.82.1074 > 76.196.10.57.60443: P 3309127345:3309127643 (298) ack 1715578504 win 63518
15: 14:08:44.116403 76.196.10.57.60443 > 10.1.1.82.1074:. ACK 3309127643 win 7504
16: 14:08:47.384654 76.196.10.57.60443 > 10.1.1.82.1074: P 1715578504:1715578882 (378) ack 3309127643 win 7504
17: 14:08:47.385417 76.196.10.57.60443 > 10.1.1.82.1074: 1715578882:1715578882 F (0) ack 3309127643 win 7504
18: 14:08:47.394068 10.1.1.82.1074 > 76.196.10.57.60443:. ACK 1715578883 win 63140
19: 14:08:47.394922 10.1.1.82.1074 > 76.196.10.57.60443: P 3309127643:3309127680 (37) ack 1715578883 win 63140
20: 14:08:47.395151 10.1.1.82.1074 > 76.196.10.57.60443: 3309127680:3309127680 F (0) ack 1715578883 win 63140
21: 14:08:47.457633 76.196.10.57.60443 > 10.1.1.82.1074: R 1715578883:1715578883 (0) win 0
22: 14:08:57.258073 10.1.1.82.500 > 76.196.10.57.500: udp 276
23: 14:08:57.336255 76.196.10.57.500 > 10.1.1.82.500: udp 40
24: 14:08:58.334211 10.1.1.82.500 > 76.196.10.57.500: udp 276
25: 14:08:58.412850 76.196.10.57.500 > 10.1.1.82.500: udp 40
26: 14:09:00.333311 10.1.1.82.500 > 76.196.10.57.500: udp 276
27: 14:09:00.410730 76.196.10.57.500 > 10.1.1.82.500: udp 40
28: 14:09:02.412561 10.1.1.82.1075 > 76.196.10.57.443: S 968016865:968016865 (0) win 64240
29: 14:09:04.349164 10.1.1.82.500 > 76.196.10.57.500: udp 276
30: 14:09:04.431648 76.196.10.57.500 > 10.1.1.82.500: udp 40
31: 14:09:05.442710 10.1.1.82.1075 > 76.196.10.57.443: S 968016865:968016865 (0) win 64240
32: 14:09:11.380427 10.1.1.82.1075 > 76.196.10.57.443: S 968016865:968016865 (0) win 64240
33: 14:09:12.349926 10.1.1.82.500 > 76.196.10.57.500: udp 276
34: 14:09:12.421502 10.1.1.82.1076 > 76.196.10.57.60443: S 3856215672:3856215672 (0) win 64240
35: 14:09:12.430794 76.196.10.57.500 > 10.1.1.82.500: udp 40
36: 14:09:12.481832 76.196.10.57.60443 > 10.1.1.82.1076: S 248909856:248909856 (0) ack 3856215673 win 5808
37: 14:09:12.527972 10.1.1.82.1076 > 76.196.10.57.60443:. ACK 248909857 win 64240
38: 14:09:12.529238 10.1.1.82.1076 > 76.196.10.57.60443: P 3856215673:3856215797 (124) ack 248909857 win 64240
39: 14:09:12.608275 76.196.10.57.60443 > 10.1.1.82.1076:. ACK 3856215797 win 5808
40: 14:09:12.658581 76.196.10.57.60443 > 10.1.1.82.1076: P 248909857:248910520 (663) ack 3856215797 win 5808
41: 14:09:12.664531 10.1.1.82.1076 > 76.196.10.57.60443: P 3856215797:3856215995 (198) ack 248910520 win 63577
42: 14:09:12.725533 76.196.10.57.60443 > 10.1.1.82.1076:. ACK 3856215995 win 6432
43: 14:09:12.880813 76.196.10.57.60443 > 10.1.1.82.1076: P 248910520:248910579 (59) ack 3856215995 win 6432
44: 14:09:12.892272 10.1.1.82.1076 > 76.196.10.57.60443: P 3856215995:3856216293 (298) ack 248910579 win 63518
45: 14:09:12.953029 76.196.10.57.60443 > 10.1.1.82.1076:. ACK 3856216293 win 7504
46: 14:09:12.955043 76.196.10.57.60443 > 10.1.1.82.1076: 248910579:248910579 F (0) ack 3856216293 win 7504
47: 14:09:12.955242 10.1.1.82.1076 > 76.196.10.57.60443:. ACK 248910580 win 63518
48: 14:09:12.955516 10.1.1.82.1076 > 76.196.10.57.60443: P 3856216293:3856216330 (37) ack 248910580 win 63518
49: 14:09:12.955730 10.1.1.82.1076 > 76.196.10.57.60443: 3856216330:3856216330 F (0) ack 248910580 win 63518
50: 14:09:13.019743 76.196.10.57.60443 > 10.1.1.82.1076: R 248910580:248910580 (0) win 0
51: 14:09:16.068691 10.1.1.82.500 > 76.196.10.57.500: udp 56
52: 14:09:16.227588 10.1.1.82.1077 > 76.196.10.57.60443: S 3657181617:3657181617 (0) win 64240
53: 14:09:16.283783 76.196.10.57.60443 > 10.1.1.82.1077: S 908773751:908773751 (0) ack 3657181618 win 5808
54: 14:09:16.306823 10.1.1.82.1077 > 76.196.10.57.60443:. ACK 908773752 win 64240
55: 14:09:16.307692 10.1.1.82.1077 > 76.196.10.57.60443: P 3657181618:3657181742 (124) ack 908773752 win 64240
56: 14:09:16.370998 76.196.10.57.60443 > 10.1.1.82.1077:. ACK 3657181742 win 5808
57: 14:09:16.411935 76.196.10.57.60443 > 10.1.1.82.1077: P 908773752:908774415 (663) ack 3657181742 win 5808
58: 14:09:16.417870 10.1.1.82.1077 > 76.196.10.57.60443: P 3657181742:3657181940 (198) ack 908774415 win 63577
59: 14:09:16.509388 76.196.10.57.60443 > 10.1.1.82.1077:. ACK 3657181940 win 6432
60: 14:09:16.708413 76.196.10.57.60443 > 10.1.1.82.1077: P 908774415:908774474 (59) ack 3657181940 win 6432
61: 14:09:16.887100 10.1.1.82.1077 > 76.196.10.57.60443: P 3657181940:3657182254 (314) ack 908774474 win 63518
62: 14:09:16.948193 76.196.10.57.60443 > 10.1.1.82.1077:. ACK 3657182254 win 7504
63: 14:09:19.698465 76.196.10.57.60443 > 10.1.1.82.1077: P 908774474:908774740 (266) ack 3657182254 win 7504
64: 14:09:19.699426 76.196.10.57.60443 > 10.1.1.82.1077: 908774740:908774740 F (0) ack 3657182254 win 7504
65: 14:09:20.060162 10.1.1.82.1077 > 76.196.10.57.60443:. ACK 908774741 win 63252
66: 14:09:20.062191 76.196.10.57.60443 > 10.1.1.82.1077: P 908774474:908774740 (266) ack 3657182254 win 7504
67: 14:09:20.063732 10.1.1.82.1077 > 76.196.10.57.60443:. ACK 908774741 win 63252
68: 14:09:20.063900 10.1.1.82.1077 > 76.196.10.57.60443: P 3657182254:3657182291 (37) ack 908774741 win 63252
69: 14:09:20.064098 10.1.1.82.1077 > 76.196.10.57.60443: 3657182291:3657182291 F (0) ack 908774741 win 63252
70: 14:09:20.127694 76.196.10.57.60443 > 10.1.1.82.1077: R 908774741:908774741 (0) win 0
70 packages shownWe had this problem of connection VPN IPsec from the years (I first thought it is restriction access problem, but it does not work or if I disable all access lists, experience of yesterday for the same restriction of the access-list shows longer than PC is not the cause). All suggestions and tips are greatly appreciated.
Sean
Hi Sean, please remove th lines highlighted in your pix and try and let me know, that these lines are not the default configuration of the PIX.
VPN-udp-class of the class-map
corresponds to the list of access vpn-udp-acl
vpn-udp-policy policy-map
VPN-udp-class
inspect the amp-ipsec
type of policy-card inspect dns migrated_dns_map_1
parameters
message-length maximum 768
Policy-map global_policy
class inspection_default
inspect the migrated_dns_map_1 dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the http
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
inspect the pptp
inspect the amp-ipsec
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
IP verify reverse path to the outside interface
Thank you
Rizwan James
-
Pass Cisco 871 and VPN to the SBS 2008 Server
to precede the questions below, I'm responsible for COMPUTING internal with several years of site / offsite support. I also have very limited knowledge of the inner workings of a Cisco device. That said, I've beaten my head against a wall, trying to configure my router Cisco 871 to allow access to our internal server of SBS 2008 VPN hosting services. I think I, and properly configured the SBS 2008 Server.
I use advanced IP services, version 12.4 (4) T7
Here is the \windows\system32\conifg\system running
Building configuration...
Current configuration: 9414 bytes
!
version 12.4
no service button
tcp KeepAlive-component snap-in service
a tcp-KeepAlive-quick service
horodateurs service debug datetime localtime show-timezone msec
Log service timestamps datetime localtime show-timezone msec
encryption password service
sequence numbers service
!
hostname yourname
!
boot-start-marker
boot-end-marker
!
Security of authentication failure rate 3 log
Passwords security min-length 6
logging buffered debugging 51200
recording console critical
enable secret 5 *.!
No aaa new-model
!
resources policy
!
PCTime-5 timezone clock
PCTime of summer time clock day April 6, 2003 02:00 October 26, 2003 02:00
IP subnet zero
no ip source route
IP cef
!
!
!
!
synwait-time of tcp IP 10
no ip bootp Server
"yourdomain.com" of the IP domain name
name of the IP-server 65.24.0.168
name of the IP-server 65.24.0.196
property intellectual ssh time 60
property intellectual ssh authentication-2 retries
inspect the IP name DEFAULT100 appfw DEFAULT100
inspect the IP name DEFAULT100 cuseeme
inspect the IP name DEFAULT100 ftp
inspect the IP h323 DEFAULT100 name
inspect the IP icmp DEFAULT100 name
inspect the IP name DEFAULT100 netshow
inspect the IP rcmd DEFAULT100 name
inspect the IP name DEFAULT100 realaudio
inspect the name DEFAULT100 rtsp IP
inspect the IP name DEFAULT100 sqlnet
inspect the name DEFAULT100 streamworks IP
inspect the name DEFAULT100 tftp IP
inspect the IP udp DEFAULT100 name
inspect the name DEFAULT100 vdolive IP
inspect the name DEFAULT100 http urlfilter IP
inspect the IP router-traffic tcp name DEFAULT100
inspect the IP name DEFAULT100 https
inspect the IP dns DEFAULT100 name
urlfilter IP interface-source FastEthernet4
property intellectual urlfilter allow mode on
urlfilter exclusive-area IP Deny. Facebook.com
refuse the urlfilter exclusive-domain IP. spicetv.com
refuse the urlfilter exclusive-domain IP. AddictingGames.com
urlfilter exclusive-area IP Deny. Disney.com
urlfilter exclusive-area IP Deny. Fest
refuse the urlfilter exclusive-domain IP. freeonlinegames.com
refuse the urlfilter exclusive-domain IP. hallpass.com
urlfilter exclusive-area IP Deny. CollegeHumor.com
refuse the urlfilter exclusive-domain IP. benmaller.com
refuse the urlfilter exclusive-domain IP. gamegecko.com
refuse the urlfilter exclusive-domain IP. ArmorGames.com
urlfilter exclusive-area IP Deny. MySpace.com
refuse the urlfilter exclusive-domain IP. Webkinz.com
refuse the urlfilter exclusive-domain IP. playnow3dgames.com
refuse the urlfilter exclusive-domain IP. ringtonemecca.com
refuse the urlfilter exclusive-domain IP. smashingames.com
urlfilter exclusive-area IP Deny. Playboy.com
refuse the urlfilter exclusive-domain IP. pokemoncrater.com
refuse the urlfilter exclusive-domain IP. freshnewgames.com
refuse the urlfilter exclusive-domain IP. Toontown.com
urlfilter exclusive-area IP Deny .online-Funny - Games.com
urlfilter exclusive-area IP Deny. ClubPenguin.com
refuse the urlfilter exclusive-domain IP. hollywoodtuna.com
refuse the urlfilter exclusive-domain IP. andkon.com
urlfilter exclusive-area IP Deny. rivals.com
refuse the urlfilter exclusive-domain IP. moregamers.com
!
policy-name appfw DEFAULT100
http request
port-bad use p2p action reset alarm
port-abuse im action reset alarm
Yahoo im application
default action reset service
service-chat action reset
Server deny name scs.msg.yahoo.com
Server deny name scsa.msg.yahoo.com
Server deny name scsb.msg.yahoo.com
Server deny name scsc.msg.yahoo.com
Server deny name scsd.msg.yahoo.com
Server deny name messenger.yahoo.com
Server deny name cs16.msg.dcn.yahoo.com
Server deny name cs19.msg.dcn.yahoo.com
Server deny name cs42.msg.dcn.yahoo.com
Server deny name cs53.msg.dcn.yahoo.com
Server deny name cs54.msg.dcn.yahoo.com
Server deny name ads1.vip.scd.yahoo.com
Server deny name radio1.launch.vip.dal.yahoo.com
Server deny name in1.msg.vip.re2.yahoo.com
Server deny name data1.my.vip.sc5.yahoo.com
Server deny name address1.pim.vip.mud.yahoo.com
Server deny name edit.messenger.yahoo.com
Server deny name http.pager.yahoo.com
Server deny name privacy.yahoo.com
Server deny name csa.yahoo.com
Server deny name csb.yahoo.com
Server deny name csc.yahoo.com
audit stop trail
aol im application
default action reset service
service-chat action reset
Server deny name login.oscar.aol.com
Server deny name toc.oscar.aol.com
Server deny name oam - d09a.blue.aol.com
audit stop trail
!
!
Crypto pki trustpoint TP-self-signed-1955428496
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 1955428496
revocation checking no
rsakeypair TP-self-signed-1955428496
!
!
TP-self-signed-1955428496 crypto pki certificate chain
certificate self-signed 01
308201B 8 A0030201 02020101 3082024F 300 D 0609 2A 864886 F70D0101 04050030
2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 31312F30
69666963 31393535 34323834 6174652D 3936301E 170 3032 30333031 30303035
33315A 17 0D 323030 31303130 30303030 305A 3031 06035504 03132649 312F302D
4F532D53 5369676E 656C662D 43 65727469 66696361 74652 31 39353534 65642D
32383439 3630819F 300 D 0609 2A 864886 01050003, 818, 0030, 81890281 F70D0101
8100CB6B E980F044 5FFD1DAE CBD35DE8 E3BE2592 DF0B2882 2F522195 4583FA03
40F4DAC6 CEAD479F A92607D4 1 B 033714 51C3A84D EA837959 F5FC6508 4D71F8E6
5B124BB3 31F0499F B0E871DB AF354991 7D45F180 5D8EE435 77C8455D 2E46DE46
67791F49 44407497 DD911CB7 593E121A 0892DF33 3234CF19 B2AE0FFD 36A640DC
2 010001 HAS 3 990203 AND 77307530 1 130101 FF040530 030101FF 30220603 0F060355 D
1104 1B 301982 17796F75 726E616D 652E796F 7572646F 6D61696E 2E636F6D 551D
301F0603 C 551 2304 18301680 145566 4581F9CD 7 5F1A49FB 49AC9EC4 678908FF
2A301D06 04160414 5566 745 81F9CD5F 1A49FB49 AC9EC467 8908FF2A 03551D0E
300 D 0609 2A 864886 818100B 3 04050003 903F5FF8 A2199E9E EA8CDA5D F70D0101
60B2E125 AA3E511A C312CC4F 0130563F 28D3C813 99022966 664D52FA AB1AA0EE
9A5C4823 6B19EAB1 7ACDA55F 6CEC4F83 5292 HAS 867 BFC65DAD A2391400 DA12860B
5A 523033 E6128892 B9BE68E9 73BF159A 28D47EA7 76E19CC9 59576CF0 AF3DDFD1
3CCF96FF EB5EB4C9 08366F8F FEC944CA 248AC7
quit smoking
secret of username admin privilege 15 5 *.!
!
Policy-map sdmappfwp2p_DEFAULT100
!
!
!
!
!
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface FastEthernet4
Description $$$ FW_OUTSIDE$ $ES_WAN$ ETH - WAN
address IP dhcp client id FastEthernet4
IP access-group 101 in
no ip redirection
no ip unreachable
no ip proxy-arp
NAT outside IP
inspect the DEFAULT100 over IP
IP virtual-reassembly
route IP cache flow
automatic duplex
automatic speed
sdmappfwp2p_DEFAULT100 of service-policy input
out of service-policy sdmappfwp2p_DEFAULT100
!
interface Vlan1
Description $ETH - SW - LAUNCH$ $INTF - INFO - HWIC-$4ESW $ES_LAN$ $FW_INSIDE$
the IP 192.168.0.1 255.255.255.0
IP access-group 100 to
no ip redirection
no ip unreachable
no ip proxy-arp
IP nat inside
IP virtual-reassembly
route IP cache flow
IP tcp adjust-mss 1452
!
IP classless
!
!
IP http server
local IP http authentication
IP http secure server
IP http timeout policy slowed down 60 life 86400 request 10000
the IP nat inside source 1 list the interface FastEthernet4 overload
IP nat inside source static tcp 192.168.0.100 1723 1723 interface FastEthernet4
IP nat inside source static tcp 192.168.0.100 25 25 FastEthernet4 interface
IP nat inside source static tcp interface 192.168.0.100 80 80 FastEthernet4
IP nat inside source static tcp 192.168.0.100 interface FastEthernet4 443 443
IP nat inside source static tcp 192.168.0.100 interface FastEthernet4 987 987
!
recording of debug trap
Note access-list 1 INSIDE_IF = Vlan1
Remark SDM_ACL category of access list 1 = 2
access-list 1 permit 192.168.0.0 0.0.0.255
access-list 100 remark self-generated by the configuration of the firewall Cisco SDM Express
Access-list 100 = 1 SDM_ACL category note
access-list 100 deny ip 255.255.255.255 host everything
access-list 100 deny ip 127.0.0.0 0.255.255.255 everything
access ip-list 100 permit a whole
access list 101 remark self-generated by the configuration of the firewall Cisco SDM Express
Note access-list 101 = 1 SDM_ACL category
access-list 101 permit tcp any any eq 1723
access-list 101 permit tcp any any eq 987
access-list 101 permit tcp any any eq 443
access-list 101 permit tcp any any eq www
access-list 101 permit tcp any any eq smtp
access-list 101 permit udp host 65.24.0.169 eq field all
access-list 101 permit udp host 65.24.0.168 eq field all
access-list 101 permit udp host 24.29.1.219 eq field all
access-list 101 permit udp host 24.29.1.218 eq field all
access-list 101 permit udp any eq bootps any eq bootpc
access-list 101 deny ip 192.168.0.0 0.0.0.255 any
access-list 101 permit icmp any any echo response
access-list 101 permit icmp any one time exceed
access-list 101 permit everything all unreachable icmp
access-list 101 deny ip 10.0.0.0 0.255.255.255 everything
access-list 101 deny ip 172.16.0.0 0.15.255.255 all
access-list 101 deny ip 192.168.0.0 0.0.255.255 everything
access-list 101 deny ip 127.0.0.0 0.255.255.255 everything
access-list 101 deny ip 255.255.255.255 host everything
access-list 101 deny ip any one
not run cdp
!
!
control plan
!
connection of the banner ^ CCCCCAuthorized access only!
Unplug IMMEDIATELY if you are not an authorized user. ^ C
!
Line con 0
local connection
no activation of the modem
telnet output transport
line to 0
local connection
telnet output transport
line vty 0 4
privilege level 15
local connection
transport input telnet ssh
!
max-task-time 5000 Planner
Scheduler allocate 4000 1000
Scheduler interval 500
endAll that top has been configured with the SDM interface. I hope someone here can take a look at this and see what my question is, and why I can't connect through the router.
All thanks in advance to help me with this.
Jason
Based on your description, I am assuming that you are trying the traffic PPTP passthrough via the router 871, and the PPTP Protocol ends on your SBS 2008 Server.
If this is the correct assumption, PPTP uses 2 protocols: TCP/1723 and GRE. Your configuration only allow TCP/1723, but not the GRE protocol.
On 101 ACL, you must add "allow accord any any" before the declarations of refusal:
101 extended IP access list
1 allow any one
I guess that the PPTP control connection works fine? Are you able to telnet to the router outside the ip address of the interface on port 1723?
-
Help! I'm stuck. No, not the child into the well. I took a picture and put a second layer top with a rounded rectangle to make a frame. My problem is that I need to find a way to hide the small box outside the box on the second layer. Thanks to all those who can help you.
Another option is to put the Options bar of the Rectangle rounded to the path tool
Trash bolt for the background layer, hold down the Cmd key and click on the symbol of the new layer to layer below the image to white. Then edit > fill with white.
Return the image layer and draw the image as a path
Click the load as a selection path in the Panel traced
Edit > stroke and stroke with color
Select > Inverse > delete
-
Two RV042 VPN has been a problem to get to the third-party router
Hello, I have two RV042 connected via VPN very well. First network let's call A.A.A.A Second network have also RV042 to B.B.B.253. B.B.B. network, we have Cisco router another provider to B.B.B.254. On this second network configuration on B.B.B.253 (our default gateway) saying that all traffic will C.C.C.C I have routing tables (just an IP address not a subnet) must pass through the router Cisco at B.B.B.254 and the location of B.B.B.B works well.
What I'm trying to accomplish, is the unique through the RV042 VPN network A.A.A.A than when I go to C.C.C.C of IP address and get passed out through B.B.B.254 (Cisco of the seller). I had the seller put the roads in their router to be able to deliver the A.A.A.A network and can ping on both networks. Specifically, I can ping from A.A.A.A to B.B.B.254. However, I would like to install my on A.A.A.A routing tables so that whenever someone goes to the unique address of C.C.C.C it passed through the VPN to the B.B.B.254. All my efforts have failed. I do not exclude the seller screwed up somewhere, but have been working on this all day and am running out of ideas. It's for all the suggestions and thanks for any help!
Concerning
It is not possible. The RV042 using a simple IPSec VPN Tunnel tunnel. Plain IPSec has routable interfaces. You cannot add static routes to handle additional traffic through the tunnel. IPSec will be tunnel only traffic that matches local & remote security groups. Because C.C.C.C is not part of a security group that he will not get in the tunnel.
-
Cannot VPN in the network through PIX501
I have a pix 501 at home. When I try to VPN in our network via the VPN client I get authenticated but can't seem to our internal network. When I use my router netgear instead of the PIX I can VPN in and outside the internal network. Do I have to open some ports (if if ports) on the PIX or I have to change some configuration on the VPN client.
The problem is the PIX does not support IPSec, and PAT up 6.3 code coming out next year. Your VPN tunnel is based on UDP port 500 packets, which the PIX can PAT correctly. After that, all your packages are packages ESP, which is the IP 50 protocol which the PIX cannot PAT. If you have a second IP address from your ISP, you can create a static NAT translation in the PIX for your home PC and it works correctly.
Alternatively, if your VPN client supports IPSec encapsulation somehow in the TCP or UDP packets, then use it and it will work very well also.
-
SSL vpn through the same internet connection to another site
Hi, I have a network with a box of Juniper SSL that connect to port DMZ ASA5510, wher outside the ASA is the same outside the box of SSL vpn.
To access issues eno hav network internal at all.
Now, I need VPN SSL Juniper box remote users and internal conenct o my remote sites, who take the client connection through an internet router (Cisco throug site to site vpn IPSec) again to the th eremote site.
Is it possible, my hunch is Yes "can be done."
Currently, I'm fitting get no where, I get no hits ASA DMZ ACL if I try to access the remote site of the SSL vpn client resources.
Schema attached
Any help would be appreciated
Shouldn't be a problem.
On the Juniper SSL, you must check if the roads has been added to the remote IPSec LAN point to the ip address DMZ ASA instead of pointing to the internet through the Juniper SSL box.
You need to configure NAT exemption on the ASA box between the pool SSL subnet to the Remote LAN of IPSec. As a result, you must also include the SSL subnet to Remote LAN subnets in the crypto ACL and mirror image ACL on the remote site ACL Cryptography.
Hope that helps.
-
VPN and port forwarding problem
Hello
I configured a VPN (IPSec) between 2 sites on Cisco 881 - K9.
The server 'A', which the 192.168.0.X address must be accessible on port 80, 8080 and 90 of the public network.
I have configured the ports of shipment with the command:
IP nat inside source static TCP 192.168.0.X 90 interface fastethernet 4 90
IP nat inside source static TCP 192.168.0.X 80 4 80 fastethernet interface
IP nat inside source static TCP 8080 interface fastethernet 4 8080 192.168.0.X
The server is accessible from the outside, the site in which it is located.
But there is a problem with the second site:
- I ping the server with its local address 192.168.0.X
- But when I try to open a Web page that is using port 80 or 8080 or 90, the server appears inaccessible
It seems that the problem is due to the translation of port because when I delete the configuration of port forwarding is no problem over on the second site.
Thanks for your help
Hello
You need conditional NAT.
When you want to Port Forwarding to work just for a part of traffic, e.g. when access to the server from the Internet
but not for traffic entering via VPN, you can add a roadmap to the end.Thus,.
IP nat inside source static TCP 192.168.0.X PUBLIC_IP 4 xx xx map route VPNThe road map tells when it is NAT that will to spend.
It will always happen, but when traffic is coming from the VPN.Now... the problem is that you can add a roadmap, when you have a rule of Port forwarding to an IP address (and not an interface).
Anyway, give it a try and let us know.
Federico.
-
How to stop multiple self-switching to the address bar every time I open a new tab and try typing something anywhere outside the address bar? As something just wants me to use this integrated search when you type something non-Web-address in the address bar and press to enter. And the most ridiculous thing is that happens repeatedly on as every second, as I just got off the address bar and start typing again, but still he passes me in the address bar, then 3, 4 times like that. And the result is that I don't see the address of this page.
I think that its has something to do with my AVG Antivirus, because it started the same time a Nation AVG started to appear in each new tab I opened (and which is irritating as me, I've read here on support.mozilla.org and it seems that the only solution is to completely reinstall Firefox, but I don't want to lose all my settings) but when I type something in the address bar and press enter It opens the search results in Google.
Please try to help me, I love Firefox but I have to switch to Chrome until I fix this.
Thanks in advance
First of all, please update Firefox 32. 22 is no longer support is not safe. So, let us know if you still have this problem. Update Firefox to the latest version
-
If I open bookmarks and select a folder which is longer than the window of Firefox is high, the part of the list of bookmarks that falls outside the window remains on the desktop when I leave bookmarks or close the window. I then do a refresh of the desktop to get rid of the junk. Doesn't happen with IE9 MS. I use Windows 7 Home Premium on a SONY VAIO laptop. All started when I went to the VAIO in last November. A 'Show Desktop' or a refresh of the office cleaning.
Could you try to disable graphics hardware acceleration? As this feature has been added to Firefox, it has gradually improved, but there are still some problems with some drivers/graphics cards.
You need to restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).
Orange Firefox button or classic menu Tools > Options > advanced
In the mini ' General' tab, uncheck the box for "use hardware acceleration when available.
If you restart Firefox, the problem is solved?
-
I gifted my father music and a song of the AUS iTunes, but they upload because it is outside the Australia (in New Zealand). Is there a way to get around this? There is only an iPad.
"gifts can only be redeemed in the country store that they came from".
You can try to contact iTunes Support through CHAT or by phone. -They can try to solve this problem.
-
The upgrade of my AT &; T Atrix 4 G on ICS outside the United States?
Hello
I am currently using my atrix 4g outside the usa and im also using a SIM card from another provider (a local supplier to the country of im to) my question is when ICS will be available soon, will I have problems to update via OTA? If so how I can go to the official OS of ICS?
Thank you
D
-
How to write multiple entries with KHz sampling frequency in a file outside the loop?
Hello
I am able several entries of string tension using the wizard DAQ (1 sample on request) and it is placed inside a timed loop of frequency 1 KHz.
This timed loop is placed inside an another while loop.
Problem is with writing data to a file, although I can see 100 samples of 100 ms in the graphics cable to the out of the way, but the extent of writing to output file stores either only from 19 to 20 samples per second (when he wrote inside the timed loop) or does not store any (if placed outside the timed inner loop).
I tried to set up producer consumer structure but in the loop of the consumer, I can't write the data in queue to a file saying data type mismatch. I placed the loop starting queue item and consumer out both loops and the element of queue inside the timed loop exit DAQ fed to the queue item.
Can you please help me solve this problem file writing?
I haven't looked so writing code from the top of the head, but access to the files is slow, and if you open and close the file, it is quite slow. What do you usually do it write to the file at a slower pace, for example once per second and write all the 1 k samples at a time. Try and also keep Ref file open during the test.
/Y
-
Digital button &; code that must run outside the switch of the event
I have an interesting situation. I have a command button which I activated the control via the mouse wheel of the user (thanks to great examples of code herein for one!). To do this I like, I had to put the processing part of the code outside the set event button, such that the value of the output of the control would be updated immediately.
The only problem with this methodology which is then when the user closes the Panel and the button control is a final reminder, this block of code is executed one last time, which translates into a non fatal error "invalid control ID '. The solution here is relevant, but is not ideal as shown above.
My solution feels like a hack, but tell me what you think - trap on EVENT_DISCARD and back at the beginning. Seems to work, just feels like a patch. Here is the code:
int CVICALLBACK KnobCallback(int panel, int control, int event, void *callbackData, int eventData1, int eventData2) { int prevValue = 0; int currValue; // current value of knob control, range = 0-100 double currMotor = 0; double currMeter = 0; double idealMotor = 0; double currVoltage; int max, min, inc; // find the range values set in the UIR control: GetCtrlAttribute(panel, control, ATTR_MIN_VALUE, &min); GetCtrlAttribute(panel, control, ATTR_MAX_VALUE, &max); GetCtrlAttribute(panel, control, ATTR_INCR_VALUE, &inc); // load the current control changed value: GetCtrlVal(panel, control, &currValue); switch (event) { case EVENT_COMMIT: // any control commit: break; case EVENT_MOUSE_WHEEL_SCROLL: switch (eventData1) { case MOUSE_WHEEL_SCROLL_UP: if (currValue < max) currValue += inc; // increment 1 step at a time, not eventData2 number of steps (Windows scroll wheel number) else { currValue = max; // hold at max return 1; // Swallow event to prevent from updating UIR } break; case MOUSE_WHEEL_SCROLL_DOWN: if (currValue > min) currValue -= inc; // decrement 1 step at a time, not eventData2 number of steps (Windows scroll wheel number) else { currValue = min; // hold at min return 1; // Swallow event to prevent from updating UIR } break; case MOUSE_WHEEL_PAGE_UP: if (currValue < max) currValue += (inc * 5); // eventData2 = 0 when PAGE up/down else { currValue = max; // hold at max return 1; // Swallow event to prevent from updating UIR } break; case MOUSE_WHEEL_PAGE_DOWN: if (currValue > min) currValue -= (inc * 5); // eventData2 = 0 when PAGE up/down else { currValue = min; // hold at min return 1; // Swallow event to prevent from updating UIR } break; } SetCtrlVal(panel, control, currValue); // update control with processed value break; case EVENT_VAL_CHANGED: if ((currValue < prevValue) && (currValue > min)) // decrementing above floor { currValue -= inc; } else if ((currValue > prevValue) && (currValue < max)) // incrementing below ceiling { currValue += inc; } else if (currValue = max) // TODO: this condition doesn't work as expected; control doesn't trap for wrap-around from max to min, vice versa { currValue = max; // hold at max return 1; // Swallow event to prevent from updating UIR } else if (currValue = min) // TODO: this condition doesn't work as expected; control doesn't trap for wrap-around from max to min, vice versa { currValue = min; // hold at min return 1; // Swallow event to prevent from updating UIR } SetCtrlVal(panel, control, currValue); // update control with processed value prevValue = currValue; // update state variable break; case EVENT_DISCARD: return 0; // TODO: bug fix for quitting cleanly, so that the code outside of the event switch doesn't execute one last time when the panel is quit. break; } // end switch currVoltage = (currValue * MOTOR_VOLT_STEP) + MOTOR_VOLT_MIN; currMotor = LabJackTimer(LABJACK_TIMER0); idealMotor = MOTOR_SLOPE * currVoltage; if (abs((int)(currMotor - idealMotor)) < MOTOR_TOL) { SetCtrlVal(panel, MAINPANEL_TEXTMSG6, "GOOD"); SetCtrlAttribute(panel, MAINPANEL_TEXTMSG6, ATTR_TEXT_BGCOLOR, VAL_GREEN); } else { SetCtrlVal(panel,MAINPANEL_TEXTMSG6,"FAIL"); SetCtrlAttribute(panel, MAINPANEL_TEXTMSG6, ATTR_TEXT_BGCOLOR, VAL_RED); } return 0; }
I suggest to put the code SetCtrlVal fragment in a separate function and call this function for the correct event only; at present, it is called for any event, including the event throwing...
In addition, there is no need to recall the values min/max/inc of your control each time, once the start programme should be enough
-
Buy 360 gamepad/controller if I am outside the United States?
Hello everyone.
I was thinking of getting a 360 controller to play on my PC, and what better place to buy it then Microsoft itself. Problem is when I'm typing in navigation information, I do not get to choose any countries outside the United States.My questions are next
1. can I order Xbox.com site controller?
2. are there any other safe place to order? I live in Bosnia and Herzegovina (europe). I checked amazon German already, but I doubt they sell real Xbox 360 controllers. There are some bad reviews on its quality so I doubt them.Thanks for the answers in advance :)
PS: Sorry for the misleading category. I did not know what to choose and I can not find Xbox site response :)
If you are unable to select a country outside the United States, shouldn't that answer your question?
Try Xbox support:
http://support.Xbox.com/en-us/
Maybe you are looking for
-
MacBook Pro 128 GB SSD storage
What can I expect from the 128 GB ssd storage in terms of size of the OS and Microsoft office installed as well as software, very simple that I need for my daily use. will it be enough, or should I go for the 256 GB. On the other hand is the pro stor
-
Unable to connect to any network
Since I moved I can't access any wireless network in the region while other computers can. Help, please. I have a Toshiba Satellite A110-260 with Windows XP Home Edition with Atheros AR5006EG Wireless Network Adapter.If there is no information, I lef
-
Re: My Satellite M70-165 is unknown in the Toshiba site
I need support (drivers and instruction) for reinialize my laptop, but it is unclear in the toshiba Web site. Why is that? Toshiba PcDiag report:Data-2012/01/03 08:06 [Information sul PC]Model Satellite M70Number parte PSM70E-01100JITNumber of series
-
User interface customized to run at the same time?
Hello My question is about the user interfaces customized for performances with the parallel model. In my current project, we use the parallel model with sockets to the UI and test 4, we have flags of chain for its execution, which displays messages
-
Is it possible to download the tool to capture for XP
It is possible to download the tool cutting, available in Vista and Win7 for XP works systerm