Similar Questions

• DESKJET D1341 PRINTER WORKS DO NOT HELP - 911

  I just reinstalled windows xp professional sp2 for my dc5100.  OK, it's all good.  I also reinstalled my printer deskjet d1341 as well.  During installation when you are prompted to connect the printer, nothing happens (no recognition of sound/no the printer at all).  I clicked on the option to continue without plugging in the printer.  I have NOT received any kind of error messages.  My D1341 printer icon is visible if you goto printers/Fax and it's like my default (this is the only one).  I try to print a page, the printer icon scrolls and appears in the lower right corner of the status bar, BUT nothing DON'T get PAST.  I have the printer connected to Intel(r) 82801FM/FBM USB2 Enhanced Host Controller - 265 C.  I just click and the status is fine without errors.  BUT STILL I CAN'T PRINT.  I connected the printer to my computer compaq laptop and have no problem.  Someone can help me.  I uninstalled and reinstalled several times.  I even tried online support for 1.5hrs without a bit of luck with HP support.  Any suggestions?

  go t this forum to please and read the page on the problem of the printer that Mr. headrick wrote he actually raised my printer and running for the first time im so happy that I found his article to answer someone else I found just by reading all the problems of the people and is to try it on my own and yes it is corrected thanks to him

• HELP AS SOON AS POSSIBLE PLEASE! 911 :-)

  Is there a genius out there somewhere who knows how to get past a screen lock pattern on a model Zte Z820! ??? PLEASE :-)

  Since this is an Android phone, you'd have better luck asking in their community.

• 911 Please HELP!

  I have a HP G60 637 CL, it was funny the other day, doesn't let me download, won't let me open some programs, I decided since I had all supported upwards, why not and recover... Worst idea this year... He eventually install not right, something about a mistake on the last drive.  Now I don't know what to do... Can someone direct me somewhere?

  Please, I beg you.

  Thank you.

  You can order below link recovery disks

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c00810334

• Satellite 1800-911 too dark screen brightness

  I have a Satellite 1800-911 that works correctly, except that the screen is too dark, you can barely see.
  I tried 3 screens and 3 inverters that work correctly in a 1800-354, without result. I also changed the cable from the motherboard to the screen without success.

  There seems to be no control that affect brightness: I tried the power saver routines: no difference.

  When I connect to an external monitor, the image is perfect.
  The laptop is a new installation of Windows ME linking the restore CD.

  Hello

  make combinations of already tried the "FN" keys on your keyboard to make you brighter screen? If not already so I suggest you perhaps it helps.
  If not, I guess you have a problem on the motherboard.

  Welcome them

• Satellite 1800-911: standby mode does not work properly

  Hello.
  I had use the model of my laptop Toshiba Satellite 1800-911 for 3 years and it's great and I had a few problems. But now, after the installation of Windows XP Professional SP2, I have a big problem. When I put in stand by mode cell phone it's going to sleep and it's great. But the problem is when I would go my work since the mode ensures that is on the HARD drive on the laptop, but the screen is always black and I have to reboot the system. I can't use my PC and my work came out... Help, please

  Best regards
  Nikola comedy
  [email protected]

  Hello Nikola

  I guess that the Windows XP SP2 update is responsible for this problem.
  Well, in this case you must update the Power Saver utility.
  What you can try on the Toshiba site.
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Perhaps it is also important to update the BIOS.
  Please check if your device has the latest BIOS version.
  Here you can find the BIOS.
  http://www.toshiba-tro.de/subpage/BIOS.html
  If you decide to update BIOS please check the update on this device procedure.

  Good luck

  Good bye

• Q10 Q10 SIM BlackBerry stops after 1 h and only allows 911. But everything else works.

  Heres my current SIM card question. My 3 yr old Q10 broken on me, he stuck in restart mode & guard just trying to restart then shuts off & trys again and again. So, I bought a replacement that has been varified locked on the sprint network. After updating, tranfering etc & insert my SIM active phone worked fine, after 5-10 min it rejects the SIM card & displays only 911 calls can be made. All work work within the phone at this moment here, receive calls, sms, internet, bbm surveys, but unable to make calls. I restart the phone & again it works very well, and then the same thing happens. New replacement SIM problem had delivered directly from sprint, still exist. Returned the phone & bought a replacement again, this time same problem accept last 1 hour then the same fact. Is it a matter of internal adjustment that ignores even the Sprint tech dept. Please someone help this Q10 lover back to blackberry'ing...

  Sprint does not use sim cards only. You must configure your device to work with your account on Sprint. I think you can do so via your online account by following the instructions below. If this does not work, contact them and they should be able to help.

  https://support.Sprint.com/support/article/activate-your-phone-to-an-existing-line-on-sprintcom/case...

• Cisco's VPN IPSec help please

  Hi all

  I have 3 sites, the main site has a cisco firewall mikrotik router.

  There is a vpn ipsec existing between the cisco router and another router cisco on the site of the 2nd and it works well.

  Now, I've added an another vpn between a 3rd site and main site. The router on the 3rd site is a mikrotik firewall.

  I had the vpn on the main site and the 3rd site where the mikrotik firewall is and it worked well.

  then for some reason, the vpn with the 3rd site has failed and I could not get it working again.

  When looking for answers, I see that the vpn for the 3rd site States the following:

  #pkts program: 46, #pkts encrypt: 46, #pkts digest: 46
  #pkts decaps: 0, #pkts decrypt: 0, #pkts check: 0

  It seems that no traffic is coming back to the cisco

  I also found the following output below to diagnose the problem.

  It seems that there is communication, but if I read this right, it looks like the cisco established a new number but the other end is not the new number

  new node-1868419487

  node-1868419487 error suppression FALSE "Information (in) condition 1" pattern

  Any help would be appreciated.

  * 02:49:51.911 Jul 22: ISAKMP: (2060): purge the node-1140469772

  * 02:49:59.723 Jul 22: ISAKMP: DPD received message KMI.

  * 02:49:59.723 Jul 22: ISAKMP: node set 1053074288 to QM_IDLE

  * 02:49:59.723 Jul 22: ISAKMP: (2060): Protocol for sending INFORMER DPD/R_U_THERE 1

  SPI 2273844328, message ID = 1053074288

  * 02:49:59.723 Jul 22: ISAKMP: (2060): seq. no 0x645EC368

  * 02:49:59.723 Jul 22: ISAKMP: (2060): my_port of x.x.x.127 package sending 5

  peer_port 00 500 (R) QM_IDLE

  * 02:49:59.723 Jul 22: ISAKMP: (2060): sending a packet IPv4 IKE.

  * 02:49:59.723 Jul 22: ISAKMP: (2060): purge the node 1053074288

  * 02:49:59.767 Jul 22: ISAKMP (2060): packet received dport x.x.x.127

  500 sport Global 500 (R) QM_IDLE

  * 02:49:59.767 Jul 22: ISAKMP: node set-1868419487 to QM_IDLE

  * 02:49:59.771 Jul 22: ISAKMP: (2060): HASH payload processing. Message ID = 24265

  47809

  * 02:49:59.771 Jul 22: ISAKMP: (2060): treatment of the NOTIFY DPD/R_U_THERE_ACK protoco

  l 1

  0, message ID SPI = 2426547809, a = 0x8705F854

  * 02:49:59.771 Jul 22: ISAKMP: (2060): DPO/R_U_THERE_ACK received from the peer 125,23

  6.211.127, sequence 0x645EC368

  * 02:49:59.771 Jul 22: ISAKMP: (2060): node-1868419487 FALSE reason for deletion error

  "Information (in) condition 1"

  * 02:49:59.771 Jul 22: ISAKMP: (2060): entry = IKE_MESG_FROM_PEER, IKE_INFO_NOTIFY

  * 02:49:59.771 Jul 22: ISAKMP: (2060): former State = new State IKE_P1_COMPLETE = IKE

  _P1_COMPLETE

  * 02:50:01.111 Jul 22: ISAKMP: (2060): purge the node-1201068805

  Comparing encrypt of 46 to 47436 counters, it seems that router is ecncrypting the traffic, but we do not get any interesting traffic on the remote side.

  Most likely, you might want to check on the remote site, if you see counters increment in parallel decryption and encryption of the counters are incrementing or not.

  On the router IOS, if are incrementing counters encrypt, and confirm that you have not any tunnel existing before the router can be seen same proxy IDs, which is already negotiated with other peer.

  Finally, please make sure that the ESP, 50 protocol traffic is not blocked in transit.
  I hope this helps.

  Kind regards
  Dinesh Moudgil

  PS Please rate helpful messages.

• Treo 755 p keeps dialing 911 emergency

  My Treo keep dialing 911, and the police is getting really annoyed with me... especially because I have a restraining order against someone out and the police are afraid that something might happen. I need to disable this feature! Messages passed about what is happening on a Treo 650 had a link to lockmytreo.com, which is now a totally different site. Help!

  You can also check out some of the different types of clip Holster design cases that allow you to put the face of your Treo on the back so, if all goes well, the buttons don't have presses.

  Discover the Palm Air case with Holster. Or, you can consider making a montage of car dashboard that can keep your Treo and be able not only to prevent accidentally pressing the button, but also keep available and accessible.

  Regarding security programs, I don't know of one that ISN'T the emergency call button.

  BTW, lockmytreo.com is now lockmymobile.com or http://www.corsoft.com/ws.asp

  Message is about: Treo 650 (Rogers)

• Help connect customers 2 linux on windows host 7 on 2 physical network cards

  I'm relatively a newbie, but I searched the forum and pulled some of my hair, I need help.

  I have 2 clients linux running windows 7. I want to fill each to a separate physical NIC Linux client

  Here's what I did:

  I have access to the vmnetcfg utility.

  Bypass: I can fill 1 image of the physical NIC 1 and this image connects successfully; the system allows me to fill the 2nd image as well as the 2nd NETWORK card, but the default value in the network address on the first NIC.

  I checked the VMX file and looks like that below, I could not find all the entries on the E0 or E1 interfaces, the VMids appear me as different (long number)?

  Customer 1 Image - file vmx

  Host networks: is it possible to combine physical network cards with the virtual vmnets? I could also connect the networks host with different IP addresses if it works.

  Thank you in advance for your ideas, I'd really appreciate your suggestions.

  jowuor wrote:

  If I assign an IP (1.1.1.1) to the first physical NETWORK adapter, open to vmnet0 and assign a different IP (2.2.2.2) address on the second NETWORK card deck to vmnet 2, the period of INVESTIGATION on the second NIC automatically goes to the IP address of the first NIC (1.1.1.1). I can understand is that 2 NICs are bridged automatically together in 1 bridged network. I want to that I'm not able to reach is 2 separate bridged networks, one on each physical NETWORK adapter

  To have a guest passed on a VMnet you don't need an IP address on the physical NETWORK adapter information.

  You cannot fill two physics to even the VMnet adapters (except you have a driver of consolidation on the host, but this will create a logic board that gets filled then). You must assign a (default) VMnet0 physical NETWORK card and the other to a free VMnet (VMnet2, for example). Each VMnet is a virtual network that can hold a single IP subnet, so it is not possible to have two cards with two different subnets physical in a single VMnet.

  Host networks: is it possible to combine physical network cards with the virtual vmnets?

  Yes. If you assign a physical NETWORK card to a VMnet it becomes another bridge.

  It's OK, but I would like to have 2 separate bridged networks. I tried this but I find myself with a single bridged network.

  Assign a physical NETWORK card to VCMnet0 and the other to VMnet2. This gives you two adapters bridged. In the prompt for the virtual NETWORK adapter choose what VMnet (and thus the bridge) must be used.

  This is a common configuration. Learn more here: http://pubs.vmware.com/ws71_ace27/wwhelp/wwhimpl/js/html/wwhelp.htm#href=ws_user/ws_net_advanced_linux_secondbridge.html

  AWo

  VCP 3 & 4

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• Connection Bridge does not work! Help!

  Hello guys.

  I have a problem for my connection work bridged on my virtual machine.

  Data sheet:

  : Server Debian Lenny 5

  3 IP is already configured in static and work

  Installed VMware Server 2. Great work.

  33580 10 vmnet

  15620 vsock 0

  VMCI 43620 2 vsock

  vmmon 60484 6

  Virtual machine installed.

  Ubuntu 9.10 Server with a minimum of gdm.

  The comments interface is configured with dhcp.

  I have setup the connection to the server bridged vmw to eth0: 1, the 3 ip address of the host. When I try ifconfig on the host I see vmnet1 and vmnet8 but I don't see vmnet0.  Anyway, until I reinstalled vmware, when I used to go to the bridge connection, after awhile the host lost the configuration of interfaces and all 3 ip addresses were assigned to the operating system virtual and strange and really stressing that it is.

  I'm a newbie on the use of vmware and I have never configured or managed bridged connection. What should I do in my case? I want almost just my virtual machine to share 1 ip with the host.

  And yes I tried to configure my interfaces with DHCP hosts, but after awhile, the configuration will automatically static...

  On the web interface of vmware, I see that the comments field is identified but all-IP. In any case, this area is not true, it's just a name I put. Maybe I need to set the host reviews domain too? Anyway, even the host is a domain. Host interfaces I just address; network mask; gateway for eth0 and just address and the mask for the other 2 remaining IP... all static.

  I'm googleing for quite awhile now, but the seams I can't solve. I'd love to read any suggestion. In fact I really need some advice.

  Thanks in advance.

  Tony1984 wrote:

  Nothing changed, ifconfig - a shows exactly the same thing I showed you on the previous posts.

  Good.

  Why they change?

  Because people tend to try things and posting them here.

  I don't spot anything.

  Good.

  Should I implement something?

  Not requested by me.

  You told me I couldn't have bridged connection after I showed you the ifconfig-a, but why?

  No, I didn't tell you that. I only told you that you cannot use an IP address on two hosts. The client needs its own unique IP address, but you announced, according to me, it doesn't even have an IP address.

  I don't want no special configuration. I just want to have regular bridged connection. What makes it 'different' in my case is

  I have 3 dedicated IP addresses, but I don't think it's a problem.

  It depends on where you use IP addresses. If they are already used on the host computer does not have one of them in the comments.

  You say: but remember, you cannot use the same IP address on two hosts at the same time. And you have two hosts

  (the VMware host and guest in VMware). This is the default configuration of vmware server?

  Regardless of if you use VMware or something different. Once you have created a system of comments (virtual machine) you have two hosts. The host where VMware Server works on and the virtual machine. And with each client, you add that you add a host computer. It is not complicated. It is the same as if you would add a physical host to your network. And each host needs a unique IP address. No matter if you use bridge or a NAT. It's as simple as that. Standard TCP/IP enterprise.

  I don't want to host 2 or I don't want this complicated thing.

  If you don't want two hosts, why you started with virtualization. It is the purpose of database virtualization. Add hosts without having to buy equipment for the new. Maybe you didn't know that the I mentioned the virtual machine also as host.

  Or perhaps what you mean, it's that I can't use the same static IP address on the host and the guest at the same time?

  Exactly! But that is not because you use filled, this is because TCP/IP works this way. All over the world, on all systems that use the TCP/IP protocol.

  I think you are missing some basics:

  VMware offers three types of failure of networks. All apply to all TCP/IP rules.

  Everything first a 'bridge' or VMnet0:

  When you use a connection open, the guest connects seamlessly to the network. By using its own MAC address and using its own unique IP configuration.

  Second, one is 'host-only' or VMnet1:

  Again, the client has its own unique valid IP configuration, but it is not connected to the physical network, but to a virtual (VMnet1). The host is also connected to VMnet1 via its virtual adapter VMnet1. VMnet1 is a separate IP subnet, it has its own subnet IP address (default something like 192.168.x.x).

  Third is "NAT" or VMnet8:

  It is also a virtual network as VMnet1 but here the host acts as a proxy for the guest. The host has its own unique and valid IP (from subnet IP VMnet8) address and uses a virtual IP address as its gateway to the outside world (physical network). Using NAT allows to hide the comments of the physical network because each package seems to come form the host.

  So, if you want to have your comments using a bridge connection, assign an IP address, which NO other host uses. Unfortunately I can't help you here, as you xxxxx'ed the information most important in your post, IP addresses. These IP addresses are the reason for which this information is requested in this forum. If they must be kept secret, you can xxx the first three digits of the address, but must appear at least in the last three games. Otherwise, we cannot check if they are correct or not.

  AWo

  VCP 3 & 4

  Author @ vmwire.net

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• I have a lg 4 k tv (40 "40UH630V TV LG ULTRA HD 4 K) with HDMI 2. 0 and if I buy apple tv 4 can be used with HDMI 2. 0 port or do I HDMI 3 port to use this? Please help me

  I have a lg 4 k tv (40 "40UH630V TV LG ULTRA HD 4 K) with HDMI 2. 0 and if I buy apple tv 4 can be used with HDMI 2. 0 port or do I HDMI 3 port to use this? Please help me

  You can use it with your TV.

• Need help to find an adapter for a third-party monitor

  Hi all! I find myself in need of a little guidance, and I hope that someone out there will have a quick n easy for me...

  I have a Mid-2011 27 'iMac. which has two ports Thunderbolt It is taken with a Wacom tablet that I use constantly, and the other is made by an external hard drive to a solid state, which has a built-in cable to Thunderbolt (no way to hang it on a different port). I also have a 27 "HP monitor that is currently connected via an HDMI USB adapter.

  The problem is that the HP monitor is actual "jiggy" - the USB does not seem fast enough to deal with requests for the monitor. It is almost unusable. I know I should run it via a HDMI adapter Thunderbolt, but as I have already mentioned the two my Thunderbolt ports are already in use.

  Someone at - it ideas? I need sort of three to two ports Thunderbolt hooks, but I can't seem to find anything for less than $300 that would work. (I am illiterate when it comes to the different cables, adapters, ports, etc., so I hope someone can point me in the right direction by using short words... Most of the products that I travel through list specifications that me Chicane).

  The monitor has two HDMIs and a VGA port, and my iMac has a Firewire 800 port, if that helps at all...

  2011 iMac have only 1 Thunderbolt port and there is no such thing as a Mid-2011, you must have an iMac of year later, if it has 2 ports Thunderbolt. All the 27 "iMacs, from 2012 to 2015 the current have 2 ports Thunderbolt.

• Help with Safari!

  My macbook air from apple not to open the Web page like www.investing.com! Help! Different Web pages all okey, but it's not working!

  Works fine for me.

  What extension you have installed and activated?

  Do you have any adware installed on your MBA?

• He can't change the region of my account! Help, please! Thank you ~ ~ ~

  Hello

  I want to change my account area. But I still balance ($0.02) so I couldn't change. Please delete my balance.

  Thank you!

  and now I can not contact the Apple Support it's always show

  We're sorry.

  We are unable to respond to your request at this time. Please try again or come back later.

  1c14bb55-ED82-4B43-9c22-fc79914a022c

  is could someone please help me contact the apple support to clear my balance or help me another way to change the region on my account please!

  Thank you!!