9203 DAQmx and connections

Similar Questions

• How do Iregister and connect

  How I have reg and connect to Firefox

  Firefox does not record to start the program.

  Did you download and install the version of Firefox from the official Mozilla servers?

  Please upgrade to the current version of Firefox 38.0.5.

  You can find the full version of the current version of the current Firefox (38.0.5) in all languages and all systems operating here:

  • https://www.Mozilla.org/en-us/Firefox/all/

• Satellite L650 Wireless disconnects and connection cannot be retrieved

  Hello everyone,

  I have a connectivity problem with my 3 year old Satellite L650, Windows 7...

  I have a LAN wireless in my house, so that my laptop will automatically connect at startup, without any problem.
  After some time (it can be minutes or hours) it loses signal and disconnects.

  This isn't a real problem, because the router is quite far from here, with walls between which can reduce the signal, so no surprises.
  But I can't reconnect later: connection status icon stops working.

  I mean it shows the image corresponding to "available wifi connections" or "connected but no internet access, but or by clicking on the icon or move the cursor of the mouse on it gives no output... it is responseless, and I can't connect to my wifi or any other wireless network.

  I tried to do it from the control panel - network and sharing Center, but the story is the same, the two "set up a new connection or network" and "connect to a network" is not responding when you click on it.
  The only way to connect is to restart the pc.

  How can I solve this?

  Any suggestion is appreciated,
  Thank you!

  > The only way to connect is to restart the pc.
  In case this question is repeated once again, try to refresh and renew the IP address.

  Go to the console (in the type of search CMD)
  Now use the command: ipconfig / renew

  After this attempt to connect to the Wlan again.

  In which case it would not be useful, I recommend you to change the settings of the router.
  I mean that you need to reset the router. Then, you need to test with different types of protection Wlan Wlan connectivity and other standard Wlan (802 11 B G or N)

  Test also the laptop with open WiFi. I mean, you must disable the encryption settings of the router. But this is only for testing purposes.
  The WiFi network must always be secure.

• Can I use an adapter of lightning and HDMI with my iPhone cable and connect it to my TV without messing up my AT & T U-verse services?

  Can I use an adapter of lightning and HDMI with my iPhone cable and connect it to my TV without messing up my services AT & T U-Verse?

  Why have something to do with your Uverse services?

• I have a second hand iPhone and can't set up as the person he was find my iPhone on the phone and wont let me sign in with my Apple or the password and IE you have to communicate with the person he was and connect with Apple here

  I have a second hand iPhone and cannot configure as the person he was find my iPhone on the phone and wont let me sign in with my Apple or the password and IE to communicate with the person he was and connect you with there Apple ID and then cut to find my iphone. Unfortunately o cannot get in contact with that I had to and now can't activate my phone can anyone help? Is there another way I can get into my new phone

  There is no possible way to turn it off without having to contact the original owner. Nothing whatsoever.

  This is why you should always check if find my iPhone is not activated on a used phone.

• is it possible to send airtime on a mac mini and connect to multiple screens (5)?

  Hello - I'm looking to see if it is possible to use Airplay to a Mac Mini and connect to five different views and see the same thought at the same time. I understand that each display would need its own apple tv, but I don't know if it's strictly a ratio of one to one, or it would be better to run the HDMI from the mini and feed a splitter HDMI and wire them hard. I want to run a video loop of an IPAD for the mini and the mini to distribute video on screens. Thank you.

  No, this is not possible with Apple TV.

• Compatibility DAQmx and NOT USB-8451

  NEITHER USB-8451 is compatible with NOR-DAQmx?

  The USB-8451 housing does not NOR-DAQmx; It uses a separate driver and API (OR-845 x; ( the latest version is 2.0).

  It is compatible in the sense that you might have OR-DAQmx and NOR-845 x installed at the same time, because they are two independent pieces of software. It is not compatible in the sense that you cannot use the USB-8451 with the API OR-DAQmx case.

• DAqmx and IMAQ pallets do not appear in my palettes of LabVIEW 2011

  Hello

  I use LabVIEW to my University via a Campus license since 2005. I installed it on several computers.

  My problem is related to a new LabVIEW installation on a brand new computer.

  I have the license Site LAbVIEW 2011 Academic just installed and validated (via the License Manager) in this new machine running 64-bit Windows Seven.

  [I also installed the DAQmx and the "distribution of February 2011" IMAQ drivers (downloaded from OR) as well as the NI Vision Software (version for LabVIEW 2011, the same distribution as the LabVIEW 2011).]

  I launched LabVIEW Ant checked to see if everything was there, specifically the DAQmx and IMAQ functions, since I have the cards OR to make the acquisition of data and images. Note that I have not yet installed these cards in the PC. I m going to do only when I would have ensured that all the software is ok.

  The subpalette DAQmx in measurement of i/o functions palette is missing.

  Also, if I'm looking for the NI-IMAQ subpalettes in the range of Vision and movement functions they also lack.

  Notice that all other subpalettes in the range of functions of Vision and movement are OK and there appear (utility of Vision, Image Processing, Machine Vision, and Vision Express).

  Then, I checked if the installed drivers are really there. For this I used the MAX or (measure explore), and it looks like it all everything is there.

  I mean, under NI MAX > my system > software I can see these articles:

  NEITHER Vision TERM 2011

  NOR-IMAQ 4.5

  NOR-DAQmx... several entries

  I checked if the forum or knowledge base in NOR have any clue on what to do, and I found somewhere by the idea of trying to fix the installation via the Windows 7 Control Panel > programs and resources > OR software.  I did this procedure twice, just in case...

  I also tried to remove and reinstall all software (including drivers) and NO, I did it twice. The result is always the same.

  Any suggestions?

  When you install the drivers, you include support for LabVIEW 2011?  If this isn't the case, you won't see the LabVIEW screw in your palettes even if the software is installed.  Normally I expect that the Setup program automatically adds this support, but he can't do it, especially if you have installed the drivers before installing LabVIEW.  See the image below:

  

• Difference between DAQMX and DAQMX base. Task list empty

  Hello

  Can someone please explain the difference between NOR-DAQMX and NIDAQMX base?

  I have recently installed Labview10.0 and NOR-DAQMX base on linux opensuse 11.4 3.4.0. Everythinng works very well. The device is recognized by labview and I put my controller and chassis using nipxiconfig. The DAQ assistant function is missing and also the drop down task and channels is empty, even if I create a new task using the basic NIDAQMX configuration utility.

  Can you get it someone please let me know where I'm going wrong?

  Thank you

  The DAQ Assistant is a Windows program only, DAQmx only.  It not Linux or with DAQmx Base.  DAQmx basic tasks and channels are a little different (I think) counterparts DAQmx.  The fall to the bottom of the list of basic parts, or is it only DAQmx?

  Lynn

• DAQmx and PDM not always work

  Hello

  I am new to the DAQmx and PDM vi and I'm hoping someone can help me. The attached code contains several structures of matter, but only one of them has the DAQmx and PDM vi running through them. My intention is to record the output voltage of two photo-recepteurs that I scan the current in a diode laser controller.  When I run this code that it does not always record the values while I'm scanning and when I leave the TDMS files viewer program will show me no data. Sometimes, but rarely, he will show me some data. The sequence stacked within the structure of case is code that runs the laser controller and a couple of translational mounts. The DAQmx and PDM vi who must save the data are right next to that.

  Thank you!

  I have it! All I had to do was move the vi DAQmx Start Task in the Structure box.

  But, I still don't know if I should have analog 1 D wave or analog DBL 2D. Who does?

• My HP Pavilion Entertainment PC will not communicate with my printer HP 309g. Suffice to say that they are connected to WIFI. I have tried wireless and connected.

  My HP Pavilion Entertainment PC will not communicate with my printer HP 309g.  Suffice to say that they are connected to WIFI.  I have tried wireless and connected.

  GR

  Since they are both HP products you the best solution is to talk to them...

  Most often when a device does not work, it is because the driver is damaged.  Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• Interference between DAQmx and VISA?

  We got a new Lock-in 7270 of Signal recovery that we would like to address by USB, using the driver for VISA provided by them. We have a second device, which is controlled by the NI USB-6212 and DAQmx 8.8 housing. VISA installed version is 4.4.1. Each of them works well as long as one device is turned on. As soon as both are turned on, the NI USB-6212 housing cannot be controlled by Labview more and the lock-in can be controlled only a few times. When the lock-in is positioned on the first, the NI USB-6212 housing is not yet recognized by Windows XP.

  This can be a problem between the two drivers, between DAQmx and VISA, while they interfer?

  No, there is no interference between the pilots. Two USB devices are in the same hub? I saw very similar problems with multiple devices and the hub is not able to provide the power for each of them. The Device Manager will tell you the current requirements for each device that is plugged in and how much is available. Typically of 500 my.

• My yahoo and facebook chats disconnecting and connects to repeatdly.

  original title: cat

  My yahoo and facebook chats disconnecting and connects to repeatdly.

  Given that your post is obviously not comments on the web site of Microsoft Answers, so I moved it on forum Feedback to windows «Implementation network, mail» and online forum

  Please return to your message and below, you will see a button change.  Click this button and change the menu Windows Version dropdown to indicate your version of WIndows.  People can help you better if they know your version of Windows.  If you are using a version of Internet Explorer, change the other drop-down menu to indicate that it is a question of IE and choose the right version of Internet Explorer.  Change the body of your message to describe any errors or the pop-up windows you see when to disconnect it deliver.  Once you have finished making your updates, click on submit.

• Change the screen startup and connection to the new theme

  How can I change the screen startup and connection to a theme driven as something the matrix? I know that some people have created programs that can do this, but prefer to stay with microsoft to do this, if possible.

  Microsoft is not all programs that allow you to do.

• Error 80072efe on the same modem and connection that update another pc

  I have a strange problem here

  Let me explain, he

  I have a pc and recently to buy a laptop without any OS

  so I bought a windows 7 Home premium and install it on

  then I want to update with windows update with my internet connection PC (detach the RJ-45 cable from the back of my pc and connect to my laptop and set up IP)

  but I have error 80072efe

  Yet once, plug the cable into my pc and check the update of windows on my pc and he was right

  I don't know if I could explain it clearly or not

  Thank you

  Q: what application or anti-virus security suite is installed...
  A: anything

  Chances are that you see the effects of a hijackware infection. See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Win7: see "using the custom installation option" and formatting the hard drive section ofhttp://windows.microsoft.com/en-us/windows7/Installing-and-reinstalling-Windows-7

  After the new installation, you will have the equivalent of a "new computer" in order to take care of EVERYTHING on the next page before connecting the machine to the internet or one local network (i.e. other computers) AND BEFORE to plug in a flash, SD card, or any other external drive to the computer otherwise:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need additional assistance with the clean install, please start a new thread in this forum:http://social.answers.microsoft.com/Forums/en-US/w7repair/threads

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft