Error 80072efe on the same modem and connection that update another pc
I have a strange problem here
Let me explain, he
I have a pc and recently to buy a laptop without any OS
so I bought a windows 7 Home premium and install it on
then I want to update with windows update with my internet connection PC (detach the RJ-45 cable from the back of my pc and connect to my laptop and set up IP)
but I have error 80072efe
Yet once, plug the cable into my pc and check the update of windows on my pc and he was right
I don't know if I could explain it clearly or not
Thank you
Q: what application or anti-virus security suite is installed...
A: anything
Chances are that you see the effects of a hijackware infection. See...
Cleaning a compromised system
http://TechNet.Microsoft.com/en-us/library/cc700813.aspx
Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!
HOW to do a clean install of Win7: see "using the custom installation option" and formatting the hard drive section ofhttp://windows.microsoft.com/en-us/windows7/Installing-and-reinstalling-Windows-7
After the new installation, you will have the equivalent of a "new computer" in order to take care of EVERYTHING on the next page before connecting the machine to the internet or one local network (i.e. other computers) AND BEFORE to plug in a flash, SD card, or any other external drive to the computer otherwise:
4 steps to help protect your new computer before going online
http://www.Microsoft.com/security/pypc.aspx
Other useful references include:
Risks & benefits of P2P file sharing
http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx
Measures to help prevent spyware
http://www.Microsoft.com/security/spyware/prevent.aspx
Measures to help prevent computer worms
http://www.Microsoft.com/security/worms/prevent.aspx
Avoid fake security software!
http://www.Microsoft.com/security/antivirus/rogue.aspx
If you need additional assistance with the clean install, please start a new thread in this forum:http://social.answers.microsoft.com/Forums/en-US/w7repair/threads
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
Tags: Windows
Similar Questions
-
How to import a layer that will have the same place and size that I have chosen?
I have a lot of web to create files.
All the products I have, can be chosen in 8 different sizes. And for each product and sizes, I need to put them in a room set file and then save it as a web file.
or 10 products = 80 different web files.
Each product to a particular size should be placed in the same area in the game room and have the same effect.
For this, I have:
1. create a bedroom set
2. create models with sizes right for products to be included in the entire room (up to 8).
3.I have created a series of actions for all sizes. Size of the image including the canvas size and export to a folder to have a layer for each product sizes.
4.I need then to charge batteries to create a group and drag - move these files to the whole of the room.
5 then I paste effects on all the layers in the group.
6.I moved all layers in the right place, as a result of my models.
So, I would avoid some steps of this... Because I have 100 products, so 800 files to create.
If I can find a way to import (swap file one by one in the same place and sizes, she will avoid steps 3, 4 and 6, which will make my life much easier...)
NB. Or remarks that helps...
Hope this is not too complicated... and thank you for your help
Jean
If I understand correctly, you already have a common framework for all 100 products.
For each product, you already have 8 image sizes to be placed in the parameter.
If this is the case, the Variables can be the most convenient option that, once the model and tab delimited file are created, the placement of all the images of 800 would we automatic, accurate and extremely efficient both. Even if you work with images, I suggest rather than images and the type you watch the video and look at how it can be applied to your project.
PS CS5 - working with Variables | The complete picture with Julieanne Kost. Adobe TV
-
It will cause problems if my new iMac OS 10.11.3 5 k has the same user id and password as my old 2008 imac OS 10.9.5
No it just means that you can download and sync past purchases and data to iCloud
-
Original title: printer connected to the WiFi modem and pc but get message saying unable to print printer not detecded
printer not detected on pc but it is installed and signel wirless right message bed printer not detected
Hi howard douglas.
1. were you able to print before without any problem?
2. when the problem started?
You can try to connect the printer directly to the computer and check what is happening.
Check out the link:
Find and install printer drivers
http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Help! I'm about to commit the homicide of the computer!
I have been troubleshooting for weeks and am now bald from ripping my hair!
Computer: Dell Inspiron 537 s Slim Desktop w / Pentium Dual - Core CPU E5200 @250 GHz
Network card: Realtek PCIe FE Family Controller (checked several times, through Windows, it works correctly)
System: Windows 7 Home Premium, 64-bit with Service Pack 1
Router: Netgear N600 model #: WNDR3400v2
Cable router: SBV5220 Surfboard Motorola
Now several months ago this desktop computer once more had SOME programs lose the ability to access the internet via an Ethernet cable.
Affected programs:
MS Internet Explorer
Mozilla Firefox
Avast! Security Suite
Work of MS Security Update
Ping works sites (Yahoo, etc.)
Other computers connected to this network via WiFi - no problem getting on the internet.
Run the network troubleshooter advises all is working properly, no suggestion.
Attempted fixes:
Turn off all extensions on IE (but don't forget Firefox and Avast! are also unable to access.)
Disabled all start-ups and the package process
Restarted in Safe Mode - still not able to access.
Ran check complete virus, then check virus run start. Minor ad-ware 'virus' not found, all corrected automatically.
Rebooted the router and the computer to infinity and beyond! s
Tried other computers using the same ethernet cable connected to this wireless routers cable, no problem accessing the internet.
Disabled functions package
Off MS Firewall
IP Reset configuration (memory: netsh ip net reset c:\resetlog.txt - without DOUBT NOT EXACT - OF THE MEMORY.) Command worked)
As I said, this had happened before and then miraculously fixed itself after a short period (less than 1 week). This time, no joy.
Of course, it's one of two things:
(1) a configuration problem I just can't find/understand.
(2) the problem of equipment more strange, more selective, in the universe.
Anyone? Anyone? Bueller?
Thank you more can I possibly Express for assistance.
You could win the lottery and have a lot of beautiful children!
(M.) Kel
Hello team zig - zag,
I wanted to thank you for your help. I finally broke down and reached out to our friends at Microsoft directly for assistance. They had me a role through all the things that you suggested (again). And finally (after many hours of phone and chat discussions) came up with an answer: "* shrug * we don't know what is the problem - choose a restore point and come back to that.» What I did. This has solved the problem of internet access, but created other problems I'm trying (nothing that I have to post here, they are specific to a particular program package).
Still, I wanted to thank you for your time and effort on my behalf. I'm very, very happy!
All my best,
Kel
-
I just bought a new iMac, and after setting up, I need to find a way to access the Photoshop and Lightroom CC CC. I am using the same airport and wifi but a different e-mail address, if that matters. ?
Hi Captainlenny
You must first download Creative cloud Application Download Adobe Creative Cloud apps | CC free trial Adobe
Then sign in with your Adobe Id (The same Id with which you bought the map) see connect and disconnect to activate Cloud Creative applications
- You cannot use a different Email address to connect
- If Creative cloud says "you are already you connect to maximum authorized devices" select " sign me out of all the other thing ' so that you can connect.
Concerning
~Assani
-
Phone bought 3 days ago and I fight to turn it on, it's just a black screen, the phone records into iTunes but does not turn, I tried holding down the home button and power at the same time and still nothing, I presume that it's a battery problem as if it was the backlight then the phone vibrated when you press the power button help Please!
Marley6921 wrote:
Phone bought 3 days ago and I fight to turn it on, it's just a black screen, the phone records into iTunes but does not turn, I tried holding down the home button and power at the same time and still nothing, I presume that it's a battery problem as if it was the backlight then the phone vibrated when you press the power button help Please!
Put it on wait ten minutes if the phone did not come one, then hold down the sleep/Home button until you see the apple logo and then release, make sure that the phone is still connected to the charger.
-
error reported from the transport layer and the error description was impossible to extract
Hi, can someone please explain how to get rid of the pop-up message when the computer starts up:
error reported from the transport layer and the error description could not be found! the message has been lost
Windows XP Virgin internet net gear wireless. I searched on the internet - nothing except suggestions, this is the internet
connections but is not working okay I tried microsoft fix
Thank you johnHi, I just started to use the hard drive that had the problem, it's still there. The problem is with the raid card. (no problem on other drives) In system config, starting there are two enteries: SATARAIDS and silcfg. I checked the SATARAIDS, rebooted
missing message. I deleted all the files SATARAIDS and silcfg. my computer, properties, hardware - deleted. deleted the folder in program files. did a scan to remove any files or file fragments on the raid drivers. I did not know I had lefe the cd in the drive for the raid drivers I have in yesterday. I rebooted.after reboot, there not says found new hardware "raid card" perhaps because the disc was in the drive and it automatticly installed drivers. FIXEDNO MORE ANNOYING MESSAGE -
can not display the webpage error something about the Server internal and 500 are down for maintenance? Yahoo search option and can get to Web site but trying to post comments online and get this message. tried to restart and got the same answer. Just set Windows to update when I logged on tonight.
Hi ginnypierson,
Thanks for posting in the Microsoft community.
I understand that you are facing the issue with can not display the webpage and you are wrong about 500 and internal server being down for maintenance.
Before you start the troubleshooting steps, I need the information required
1. what web browser do you use?
2. have you made any changes to the computer?
3. this problem occurs only with the particular website?
Method 1:
If you use Internet explorer, I suggest you to see link and check.
Get help with the Web site (HTTP error) error messages.
http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-website-error-messages-HTTP-errors
Method 2:
I suggest you to see link and check.
How to optimize Internet Explorer
http://support.Microsoft.com/kb/936213/ro
WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings
Please follow these recommended steps, review the additional information provided and after back if you still experience the issue. I will be happy to provide you with additional options available that you can use to get this resolved.
-
I have 16 GB installed in the case (4x4Go), but only 8 GB has, even in the BIOS.All the 4 sticks of RAM are the same brand and compatible with my motherboard.I'm running Windows 7 Home Premium 64 - bit, which limit memory is 16 GB, so this isn't the issue.I got a few BSOD - 0 x 00000109 - errors that I work.I ran memtest86 for a few hours and he scored 4 errors during test cycles 7.These memtest errors concern the bars invisible RAM or the work those?Any ideas as to what should I do next?See you soon!Data sheet:
Windows 7 Home Premium 64-bit
Intel Core i7-3820 @ 3.6 GHz
ASUS P9X79
GeForce GTX 650
Team elite Dual Channel DDR3 4 GB 1333 Mhz x 4Thanks Joel,
I started to individually test RAM when I noticed a quirk in the way they were organized in their locations.I downloaded the manual for my P9X79 and he confirmed that they were arranged in mirror mode.I switched two of the sticks to adjacent slots and, Lo and behold, the full 16 GB presented at startup.So that's one mystery solved at least.I'll raise the memtest to see if it includes several errors and if so will continue to individually control the RAM sticks.Thanks again.Nick -
I had a problem with my Mac, and I have to reinstall Adobe Photoshop CS4, I have on a CD. I put the serial number I have on the cover, it takes it. another window opens and ask for the serial number. again, I put the same number and it says: invalid.
where will be the second serial number?
Help me please.
Thanks, Abe
Hi,
Please see error "serial number is not valid for this product". Creative Suite and serial number incorrect error
Kind regards
Sheena
-
Just updated for first elements 13 took a film and tried to apply instant film. I get a dialog box called "Adobe first Elements.exe - no disc. I have not all discs, because I downloaded this update. A ran the same film and function on 12 items, it has worked well. I reinstalled the 13 items that was no help. Note it is very difficult to get rid of this box, it crashes the program elements sometimes
mnicolett4
What operating system is involved? Assuming that Windows 7, 8 or 8.1 64-bit for now.
There is a known No Disc error associated with the elements first 13/13.1. The Adobe fix is the removal or disabling of the OldFilm.AEX file. Let us determine if this applies to your situation.
The file OldFilm.AEX that you remove or disable renaming in OldFIlm.AEXOLD is located in the path of 64-bit Windows 7, 8 or 8.1 of
Local disk C
Program Files
Adobe
Adobe Premiere Elements 13
Plug-ins
Commune
NewBlue
and in NewBlue folder is the file OldFilm.AEX that you remove or disable renaming in OldFilm.AEXOLD.
Please let us know if it works for you.
Thank you.
RTA
Add on... Have you updated 13 to 13.1 still using Help Menu/updates to date of an open project? If this isn't the case, please do.
-
The same ID and Message of a group line
ID MESSAGES 1 On the method of calculation error 1 T_RATE cannot be null 2 On the method of calculation error 2 Length is greater than 10 ID MESSAGES 1 Error on the method of calculation, T_RATE cannot be null 2 Error on the method of calculation, the length was greater than 10 How to group the same id and message together? Thank you
Hello
This is called String aggregation. Here's a way to do it:
SELECT id
LISTAGG (messages, ",") THE Group (ORDER BY NULL) as messages
FROM table_x
GROUP BY id
;
Other means, see
-
Have a problem with Lightroom 5.4. Given that the program crashed yesterday, will not start, it comes up with the message "Lightroom has encountered an error when reading the preview cache and need to quit." "Lightroom will attempt to solve this problem, the next time he throws." Except that it isn't, I get the same message and the program closes. Anyone know what I can do to fix it? Can not backup, can't do anything.
There are dozens of discussions in this forum that describe the fix
-
Error: "LR has encountered an error when reading the preview cache and need to quit."
Trying to open it, a message "LR has encountered an error when reading the preview cache and needs to stop smoking. LR will attempt to fix the next time it starts. "apppears and it stops. Tried many launches and the same error appears. Help!
Post edited by: Brett N
OK, go to the Lightroom folder (in images by default) and delete the folder/file ending with the extension.lrdata. Previews have somehow become corrupt.
Maybe you are looking for
-
Can't start Bios or something else.
HP p6755a i5 desktop 310; I was trying to change my video card stock to a card ASUS GTX 750 standard. The new card did not work. After power off, I put the old card back, and it does not work. Without HDMI, DVI or VGA I pluged the screen in the Port
-
HP Elitebook 850 G1: Not accepted recovery key
New Elitebook 850 G1. Implementation has begun. Fill recovery key. Configure security. Installed Mozilla Firefox. Stop. Later, during startup, the computer immediately went to f11 and encryption recovery driver. Tried typing in the recovery k
-
What drivers are needed for windows 7 recognize a system with 4 processors, dual-core?
I have a HP ProLiant DL580 G4 with the following CPU specifications: Four dual-core processors Intel Xeon 7140 M. All of them identical, but the specifications can be found here I'm running Windows 7 ultimate or Windows 7 Enterprise, but the recognit
-
PHOTOSMART 7520 GOING 'OFF LINE' IN ENERGY SAVING MODE
My Photosmart 7520 is connected wireless to my HP Envy laptop m6 running Windows 8. When turned on, it works. I can send print jobs to the printer from my laptop and print. But after the printer has been in this is the mode to save energy for a fe
-
BlackBerry Smartphones screen stays in the Holster
I have the BlackBerry brand leather case for my curve. Sometimes the screen turns off shortly after it is holstered and sometimes it stays on. I've disabled the hotkeys on the sides of the unit and changed the auto lock on Holster settings and the di