9630 Simulator and mds questions

Similar Questions

• Problem with Simulator and MDS Digest authorization

  I work for a BlackBerry App.

  It can connect to a Web Service and ask for a response with Digest authentication.

  I did a class to connect to the Web Service. It can work.

  Now, I have a problem.

  When the Web service returns the Digest Authorizationchallenge

  I find that the response header is not a permit to Digest but a simulator base permission and MDS.

  On my PC, I got the response packet, it contains the Digest Authorization header.

  But now it has become fundamental in the Simulator.

  What is the problem with the MDS? It changed the Authorization header?

  It is inconceivable.

  Who knows what happened?

  Thank you! Martin

  I found some ideas in the following video.

  http://www.BlackBerry.com/DevMediaLibrary/view.do?name=NetworkingTransports

  Addition of property(;deviceside=true) to connection URL will be effective.

• Simulator of MDS and Blackberry 8110

  I have a problem with the simulator of MDS and Blackberry 8110.

  I just test my application because when I try to connect to the internet using mds - cs, the web browser (or my request) my 8110 Simulator gives me the error "unable to connect to the selected Mobile Data Service, please try again later." ...".

  The same application with another Simulator (i.e. Blackberry 8900) works without a problem, and I can surf the web with the built-in web browser.

  I'm running on Windows Seven x 86

  Java 1.6.0 update 20

  BlackBerry JDE 5.0.0

  8110 Simulator is 4.5.0.81.

  (I'm sorry for my English )

  Solved!

  I used a generic Simulator. Installed by Vodafone one, and now I can surf the web from my blackberry Simulator.

  Note: I noticed that with Blackberry 8900 generic Simulator I can surf the internet with the active wi - fi network.

• Push by MDS Simulator and Win7

  Hi all

  I have a new computer with Win7 Professional installed and I had trouble getting the BlackBerry Simulator to recognize the push in my application.  I also have my old WinXP computer that gets the push with my BlackBerry application "under development".  That is, it works on Windows XP but not on Win7.

  I use Eclipse Galileo with the BlackBerry plug-in.  Develop with BlackBerry JRE v4.6.0.23 on BlackBerry 9000 Simulator.  The MDS Simulator is installed in C:\BlackBerry Email and simulators of Services SDM 4.1.4 avoid C:\Program Files security restrictions.

  Configuration of the Simulator in the 'rimpublic.property' file is to remove the # from the line 'push.application.reliable.ports = 100' at the bottom of the file.  No other changes are made.  The MDS web server started on port 8080 (default).

  On the Windows XP computer, I start the MDS Simulator, then I start my Eclipse application and the BlackBerry Simulator starts.  I'll leave my app and open the web browser and launch a Web site (any) and I'll see the work of MDS Simulator.  That is it will be showing the entries in the window back of MDS.  It's what I expect. Then I run my application and send the thrust and everything works fine.

  On the Win7 computer, I use the same version of BlackBerry Simulator 4.1.4 the same version of Eclipse and the same version of the BlackBerry Simulator.  When I access a Web site on the BlackBerry, nothing happens in the MDS Simulator Dos window.  I get a web page, but I think something is happening in the MDS Simulator Dos window.

  That's where the problem lies, in my opinion, but I'm not sure.  Push sample instructions say to launch Web site on the BlackBerry browser to get the push to work properly.  Is this true or am I wrong interpret this?

  Also on the Win7 machine, even if the BlackBerry browser does not have it that I'm waiting on the MDS Simulator, if I push my data in any case, I see the MDS recognizing thrust.

  Long story short, my BlackBerry application will not recognize the thrust of my request to push .net on Win7, but works fine on Windows XP.

  I've been watching for the last 2 days and have largely done a search, but there is not much info on this type of problem.

  Any suggestions / help would be greatly appreciated?

  Here is some information displayed in the window back Simulator MDS after I send my push.

  <2010-07-16 09:11:26.080 CDT>:[127]:::
  <2010-07-16 09:11:26.081 CDT>:[128]:::
  <2010-07-16 09:11:26.082 CDT>:[129]:::
  <2010-07-16 09:11:26.082 CDT>:[130]:::
  <2010-07-16 09:11:26.083 CDT>:[131]:::
  <2010-07-16 09:11:26.084 CDT>:[132]:::application/vnd.rim.html>
  <2010-07-16 09:11:26.084 CDT>:[133]:::application/vnd.rim.html>
  <2010-07-16 09:11:26.084 CDT>:[134]:::application/vnd.rim.html>
  <2010-07-16 09:11:26.084 CDT>:[135]:::application/vnd.rim.html>
  <2010-07-16 09:11:26.088 CDT>:[136]:::text/css>
  <2010-07-16 09:11:26.090 CDT>:[137]:::application/vnd.wap.multipart.related>
  
  <2010-07-16 09:11:26.091 CDT>:[138]:::application/vnd.wap.multipart.alte
  rnative>
  <2010-07-16 09:11:26.091 CDT>:[139]:::application/vnd.wap.multipart.mixed>
  <2010-07-16 09:11:26.094 CDT>:[140]:::application/vnd.wap.wmlc>
  <2010-07-16 09:11:26.095 CDT>:[141]:::
  <2010-07-16 09:11:26.095 CDT>:[141]:::
  <2010-07-16 09:11:26.095 CDT>:[141]:::
  <2010-07-16 09:11:26.095 CDT>:[141]:::
  <2010-07-16 09:11:26.095 CDT>:[141]:::
  <2010-07-16 09:11:26.097 CDT>:[142]:::
  <2010-07-16 09:11:26.105 CDT>:[147]:::
  <2010-07-16 09:11:26.126 CDT>:[152]:::
  <2010-07-16 09:11:26.146 CDT>:[157]:::
  <2010-07-16 09:11:26.166 CDT>:[162]:::
  

  Closure of this thread that I started another one who works on the httppushdemo getting work with Win7.  See here http://supportforums.blackberry.com/t5/BlackBerry-Push-Development/MDS-Simulator-and-Win7/td-p/54780...

• Error Failed to Transmit in the BB 9630 Simulator

  I tried to connect my BB 9630 Simulator via BB JDE 4.7 application but it gave me an error like being down to pass .

  When I tried to open google in a simulator, it gave me error unable to connect to SCM current please try again

  My application works very well in all BOLD, Curve, Storm simulators & other devices too... use MDS default connection in the URL...

  When I CoverageInfo to use class in my application to find out where transport are set as default in the Simulator 9630, I discovered it established as TCP/IP or WAP...

  So u can tell me how I do my BES/MDS Simulator compatible or is 9630 Simulator is not compatible with JDE 4.7 MDS (because it is supplied separately)...?

  Or what is the problem...?

  Any kind of help would be appreciated...?

  Hello

  After doing some R & D that I matched d question... .He was essentially due to my Simulator has not been configured for BES / MDS... so I downloaded 9630 Sprint Simulator and it struck my request & it started working...

  Usually in normal JDE, simulators that are provided by default, they are set to /MDS BES...

  Thus, for the new simulators that are not provided with to set an option by clicking on the check box start SDM-CS with the Simulator in Edit-> preferences from the JDE

• Internet Simulator with mds on does not work

  Hi all, I'm having a problem using the Simulator.

  Today, I was testing my app on the Simulator and everything was fine, until the sudenly the internet connection no longer works

  I'm using Eclipse and run the 8520 with 5.0.0 sdk, my mds is 7.0 JDE

  I can connect to MDS thrugh a normal browser to localhost: 8080 and seems to works, but when I use the Simulator he has no connection at all, even when I start to say that there are no connectivity bb browser.

  Someone knows how to fix this?

  Thank you!

  Maybe your Mobile network is disabled, go to connection to manage in your Simulator and check it out.

• 9630 simulator is available?

  Hi, do you know where (and if?) I can find 9630 Simulator?

  Kind regards

  9630 Simulator is here now... Download now...

• Setting port channel between UCS - FI and MDS 9124 (Mode F)

  Dear team,

  We tried to create the channel of port between UCS FI and MDS 9124

  But the port channel do not take action in mode F on MDS 9124

  FI is in host FC end Mode

  We have allowed FC uplink on FI trunking

  We have activated NPIV on MDS

  We have activated the MDS trunk

  FI and MDS in default VSAN

  To check that we have changed the way FI FC channels mode and switch port became active, but in E mode

  When we enabled CF trunking of uplink on the port mode FI channels and FC Switching became active in mode TE

  but in both cases above, showflogi database shows WWPN of SAN alone does not have the any fi.

  How to achieve this?

  Have read that no need to change the mode switching mode of CF swicthing and keep FC Endhost way

  SO how to channel ports with mode F MDS and FI (Display Mode as NProxy)

  What is it has nothing to do with the MDS NX - OS version? (https://supportforums.cisco.com/thread/2179129)

  If yes how to put as license for ports came with the camera and we don't have any CAP/PAK or license file as she came

  with license

  Also, we saw 2 files available for download (m9100-s2ek9-kickstart - mz.5.2.8 .bin and m9100-s2ek9 - mz.5.2.8 .bin b b) to use

  Thanks and greetings

  Jose

  Hi Jo Bo.

  What version of the software if your MDS race?

  On your UCS do connect nxos and show ficelleStringString ficelleT inteface and find the mac address.

  It is possible that you could be hitting the bug below. If this is the case, you may need to update the firmware on your MDS.

  Add MAC YES '002a6a', '8c604f', '00defb' for 5 k/UCS-FI

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId= CSCty04686

  Symptom:

  Link change cannot connect any other Nexus or other Cisco Switch in mode VAN with a port channel F.   Question can be viewed in older versions of 5.1

  5.1.3.N1.1a

  but not later

  5.1.3.N2.1c

  Release. Question is also found in

  5.2 (1) N1 (1)

  and

  6.0 (2) N1 (1)

  and later versions.

  Conditions:

  Nexus configured for the link SAN PortChannels or NPIV Nexus mode connected to the UCS via regular F port channel where UCS VAN VAN edge mode switch: YES switch manufactured FI or another Cisco UCS Port WWN: xx:xx:00:2 has: 6a: xx:xx:xx or xx:xx:8 c: 60:4f:xx:xx:xx

  Workaround solution:

  Turn-off on Nexus 5 k TF-port question link mode does not happen with standard F-PORT SAN to remove Portchannel config

  Other Description of the problem:

  To check question collect please see the flogi-event history internal errors whenever the port is attempted OLS, AMENDMENTS, PBA counters will increment. This can be determined via the following output, view port internal info to see all the internal-historic port of error events

• I recently dropped my laptop and it is weird, one day he int open up to 4 start times and sometimes it shows me a folder and a question mark in the interface and sometimes asked to reset my password, what are the steps to take?

  I recently dropped my laptop and it is weird, one day he int open up to 4 start times and sometimes it shows me a folder and a question mark in the interface and sometimes asked to reset my password, what are the steps to take?

  Anything can be corrupted on your MacBook Pro, but from what you say, it seems that the cable drive/SSD/flash memory/SATA hard was seriously damaged. Him "question mark" means that your Mac is unable to find any bootable device, meaning that it does not yet detect your OS X drive.

  You should make a backup of your files (if you can still do it) and take the Mac at the Apple Store or dealer to get a diagnosis. There may be several damaged parts.

• Control and simulation and data acquisition

  Hello

  I am applying to motor control in Labview. I'm sampling speed from DC engine in real time through an acquisition of data. (my sampling time is 1000 samples per second)

  Then wrap speed as input to a Simulation (simulation and design of the order) and inside the loop simulation, I have a PID controller. The PID has the actual speed of the engine for the acquisition of data and the engine reference speed as input.

  Reference engine speed comes from the generator of signals (control design and simulation-Simulation) and is a waveform.

  My step in the engine size is 1000.

  I am running this application real-time and drawing the reference signal and the motor real signals. I run into several problems with regard to the calendar.

  1. when I change the size of the step of the simulation loop, the frequency of squares of reference also seems to change. For example. What step size = 1000, duration of pulse = 1 s. What step size = 100, pulse width = 0.1. (My pulse frequency is 1 Hz, Simulation clock - 10 kHz). How step size can affect the pulse width.

  2. can you explain the relationship between the DAQ, the Simulation step size loop sampling time, Loop Simulation period.

  3. If I want to collect different sets of data using sampling different hours, it's OK to change the sampling DAQ time without changing the size of the step of the simulation.

  Would also like to emphasize that the DAQmx calendar under sample clock mode is placed in front of the simulation loop and the output is connected to the loop simulation.

  Appreciate any help.

  Hello

  Maybe some screenshots of your code would help. Furthermore, what you have read your samples together with your DAQ screws?

  (1) If you have a waveform, the output is specified as:

  

  For example, if you change the size of the step of the simulation loop, you change the simulation time which are introduced into the signal generator and affecting the waveform that you see if you do not have a size quite small step to characterize the waveform that you generate.

  (2) sampling DAQ rate is the speed at which samples are taken on the acquisition of card data itself. The size of the simulation step, help. "Specifies the interval between the time when the ODE Solver evaluates the model and updates the results of the model, in a few seconds." Simulation loop, still using, "Indicates the amount of time that elapses between two subsequent iterations of the loop of control & Simulation.". " "Step size determine the value of t that is introduced to the functions you use in the loop simulation while the loop simulation period controls simply to how fast you change the following t value. The sampling rate of DAQ hardware is a clock of completely separate hardware controlling the analogue-digital on the DAQ card converter so that you can get a deterministic dt between the samples being acquired.

  (3) you can change the schedule for the acquisition of data, but you will need to restart each time the changes take effect. If you change the calendar of data acquisition and want your values to correlate with your simulation, you will need to change your size of step as well.

  -Zach

  -Zach

• I just dug my copy of train simulator, and it does not work on Windows 7 64-bit. Ideas please

  I just dug my copy of train simulator, and it does not work on Windows 7 64-bit. Ideas please

  Thank you very much for all your suggestions. "Iwent with."

  This can help with some (but not all the) programs/drivers:

  (1) uninstall the program, if it is already installed. Then when install you / reinstall instead of double click on the Setup file, right click and select 'resolve compatibility issues.

  (2) then click on 'Try recommended settings' and in the next window, click on "Start the Program" to install it.

  (3) after he set up see if it works properly. Note: some programs may not be able to run in Windows 7.

  and it worked.

  did anyone tried the version updated? I read some rather disappointing reveiws.

  Once again my kind thanks for all your suggestions

• How to recover the forgotten password if you have forgotten your password for the alternative account and the question secret

  Hi, I am unable to access my account of * address email is removed from the privacy *. I really need to return as soon as possible because I have a lot of important issues and contacts inside...

  Thank you!

  View all Windows Live and Hotmail questions in the appropriate forum found here:
  http://windowslivehelp.com/

• Kindly unblock my account that I don't remember my email and Security Question.

  Kindly unblock my account that I don't remember my email and Security Question.

  I received important emails in the account. He has been blocked it for a month now.

  Kindly unblock as soon as POSSIBLE.

  I'll be very grateful.

  Thank you.

  Hello

  If you are referring to a Hotmail account, read this

  I'm sorry, but we cannot help with hotmail problems in Microsoft answers Feedback Forum you send to

  Please repost your question in hotmail in the hotmail link below forums

  http://windowslivehelp.com/product.aspx?ProductID=1

  Forums

  E-mail client and the appliance issues

  Hotmail Sign In questions

  Lost or deleted emails

  People and Contacts

  Reading, writing, and formatting mail

  Sending and receiving mail

  Sign in, and sign to the top and account security

  Using the Hotmail calendar

  Using Web Messenger

   

   

  Consult with Microsoft Certified Solutions

  How to work the views Active Hotmail?

  Your account has been temporarily blocked

  What to do if you can't connect to Windows Live Hotmail

  Compromised account - unauthorized account access

  Reset your Windows Live ID password

  Error when you try to send an e-mail: your message seems to have triggered our spam filters.

  Change your Windows Live ID password

• I forgot my password and secret question

  I firgot my password and my question secret, help me please

  Hi TUNCAYTUNCAY,

  ·          You are Ref Err by Windows password or password any program?

  See the link below to learn more about Microsoft support for forgotten passwords.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-security/keeping-passwords-secure-Microsoft-policy-on/024dd682-b3a4-4EA8-8E71-8e4892092a5e

• WinXPsysytem: The upgrade and have questions

  Have a dell e521 that I train and some questions.  Have already updated to 3 GB of memory on x 86 operating system.  Bios version active what 1.1.6 4/7/2007.  Have checked Dells site and they offer a version of bios 1.1.11 released on 04/09/2007.  Having checked their previous versions and mine is not yet in there.  Don't know if I should go with the 1.1.11 version or stick with what is on mine, any suggestions?  Also, I put in a 500 GB seagate HDD.  Have a 80 GB drive there now which is pretty maxed out.  Playing with the idea to put xp pro on the 80 GB and using the programs and storage 500 GB.  I would like to know if it's a good idea or not!  Could use pointers and how much others who have more experience I have of course on my best options for installation.  for performance and features.  Thank you in advance, Ron.

  It's sad to say, you should probably have spent your money on a new computer rather than on the RAM and a new hard drive.  Windows XP (you posted in a forum of Windows XP, that's what I assume you have) will be supported is no longer starting in April 2014. This means no more security updates and therefore increases the vulnerability to malware.

  That said, your system now-updated can probably support Windows 7. You must run the Windows 7 Upgrade Advisor to check the remaining material.

  As you say, Dell does not list the intervening versions of BIOS with 1.1.4, 1.1.10, so unless someone at Dell or in the Dell forums can tell you what "improvements" in your version or with your version 1.1.10, you have no way of determining that. Based on omissions, I think there were only minor changes in these versions.

  Normally, I would leave the BIOS alone.  Note, however, that Dell "recommends" 1.1.10 be installed because
  The update contains improvements or changes that will keep your system current and compatible with other system modules (firmware, BIOS, drivers and software) software.
  If you want to stick with XP, I would leave the BIOS alone. If you want to install Windows 7 (assuming that there are Windows 7 drivers for all your hardware), I would Setup 1.1.11.  Be sure to read and follow instructions carefully.

  BTW, it's a little surprising that you only have a 80 GB drive.  CNET review of the Dimension E521 said he came with a 320 GB drive.