Error Failed to Transmit in the BB 9630 Simulator

Similar Questions

• Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

  I got an error message in step 2 of configuring updates - "updates were not correctly configured.  Returning from changes' anyone can help solve this problem?

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358

• BlackBerry JDE fails to start after the installation of Simulator Tour 9630

  I use JDE 4.7.0 on Win XP + a bunch of simulators.

  After the Tour 9630 Simulator (v 4.7.1.40), I installed the JDE does not start.

  I tried to run ide.bat via command line - it does not give error messages.

  I tried to reinstall my JDE (with deletion of the dir of installation in order to remove settings from JDE is) - it did not help.

  I am now able to run the JDE again after that I uninstalled the Tour 9630 Simulator. But I really need this Simulator because I develop an application for the round.

  What could be the problem?

  Thanks to Marc post here the solution I managed to solve this problem.

  The solution is:

  1. install the Simulator
  2. Make a copy of its installation directory
  3. uninstall the Simulator
  4. manually create a new Simulator in JDE by using the copy of the directory

• Windows Media Center extender on my XBOX works initially, but not after reboot of my XBOX. Error: Failed to connect to the Xbox 360 could not connect to the windows Media Center computer.

  It's VERY odd and very annoying!

  I set up my laptop next to my Xbox 360 with an Ethernet cable directly connecting the laptop to the XBOX, and the laptop is on our wireless network. The XBOX has access to the internet (shared through the laptop), and when I test the PC connection and the connection XBOX Live sound fine to all.

  So I'll try to set up Windows Media Center, it works great! I "Add Extender", put the code to 8 digits. It passes through the installation, all works, no problems and WMC opens on the XBOX, I can go into my library, watch movies etc... works great!

  However! As soon as I turn my XBOX off and back on, it will fail to connect to the WMC.

  He says his 'find Windows Media Center PC' which seems to work fine, it goes to the ' Windows Media Center loading screen "contact...". ", and after about 10 seconds, I get an error"failed to connect the Xbox 360 could not connect to windows Media Center PC. Make sure that the PC is turned on and connected to the network.

  I tried to configure the Extender repeatedly, whenever it works fine until I restart the XBOX... :/ - and its strange cause I still the internet connection (shared through the laptop) after turning on the XBOX, its really JUST Media Center which is screwing around.

  She continues to keep trying to connect then repeatedly fails.

  If I wanted to, I could re-configuration the WMC Extender EVERY TIME turn off the Xbox, which works the first time without fault, but that's all just stupid.

  I can't really understand what is happening here... any help would be appreciated.

  Hello

  Refer the article that could help you solve this problem.
  http://support.Microsoft.com/kb/932163

• Error "Failed to setup of the Windows updates"

  Hello

  Have a brand new asus xc550c who had the updates installed and loaded, frozen, then went to the screen "reverting the changes windows features Configuration failure", paste here for two hours and counting.

  I can't restart the computer, like the Asus has a soft stop, which means that I only get the same screen on startup. Basically, I am unable to do anything at all with my laptop. All other threads assume that you can access the start menu, but it's impossible.

  What is the solution to this problem?

  Original title: Windows 8 update problem

  Hi aaronbeard,

  You did changes to the computer before this problem?

  I can understand how it can be frustrating when things does not work.

  Adding to suggestions from Shawn "Cmdr" Keene [MVP], you can try the suggestions in the following article and check if it helps you in fixing the issue with Windows updates.

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  http://support.Microsoft.com/kb/949358/en-us

  Note: After troubleshooting, consult this section «How to reset the computer to start normally after a boot minimum troubleshooting»

  System Restore warning: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Hope this helps, if the problem persists with Windows updates, please get back to us. We are here to help you.

• When running Disk Management, get the error - failed to connect to the virtual disk Service.

  When I run the Snap on the local server disk management, I get an error message in the status bar: unable to connect to the virtual disk Service.

  Thanks, I have tried these things and nothing has solved the problem.  Here's what I did:

  (a) check the VDS service was manual and failures later per second are 'take no action '.
  ANSWER: Yes to manual and following, second has not changed to "restart the service" of "non-action".
   
  (b) sfc/scannow as administrator
  ANSWER: the System File Checker has found no problem (program reported no problem and findstr/c: "[SR]" on CBS.log doesn't have the list of issues)

  (c) restore to a previous system restore point
  ANSWER: I have tried restore points several more early, each of them failed

• Error "Failed to connect to the remote computer" VMware View Client

  Hello everyone. I'm currently testing the package VMware view, but stuck on a problem, I can't understand.  I have already tried Googling every possible thing, but still came short on what to do.

  Currently I have:

  Server ESXi 3.5

  -vCenter Server

  -Connection to the server

  -3 swimming pools installed individual office xp host w/view agents

  At the moment, I seemed straight installation because I am able to connect using VMware client/portal with any full blown windows box anywhere in the internal network.  The problem I have is when I try to load the client software VMware view on a HP Neoware e90 box running windows xp embedded.  When I loaded the software and try to connect, I get the address connection server, authentication screen passes, but receives the error "the connection to the remote computer failed" when I try to select one of the desktop images in the list.

  I am capable of everything everywhere, ping from thin client to conn. Server, thin client desktop image and vice versa.  I am also able to RDP in the desktop images in the light client area but just can't understand why it won't pass this error above.  I tried to disable the firewall on everything, but it still doesn't seem to work.  Am I missing a simple step or has someone else has encountered this problem before? Any help would be greatly appreciated. Thank you.

  When you have disabled the firewall was that the firewall or service / network level? If it was at the level of the network, then you must disable the service and stop it. If you have the service, then can you get the logs of the client and post them. Often this info can indicate where he is faced with a problem.

  You want to make a difference in the future of VMware products? Feature to ask your ideas ( http://www.vmware.com/support/policies/feature.html )!

• Gets the error - failed to connect to the internet intermittently in the Windows XP machine.

  Original title: intermittent connection problem.

  I have intermittent connection problem - every few minutes says that it is impossible to connect, when I click on diagnose and then then the connection is re-established. This happens on a single PC - I have 3 on the network.

  Maybe it's my imagination, but when I disable the 1394 adapter, it seems to be more reliable

  I reinstalled the network driver, BIOS and chipset drivers (they were all out of date anyway)

  My problem, which could be caused by Norton firewall? Is it likely to be hardware related software?

  Hi Mattsurf,

  If the problem is not repeated in safe mode, there is probably a startup item or service is causing the problem. Follow the steps on the following link to locate the item or service responsible for the error:

  http://support.Microsoft.com/kb/929135

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When you try to access newsgroups Microsoft with Outlook, I get the error failed to connect to the server

  Configuration:
  Account: msnews.microsoft.com
  Server: msnews.microsoft.com
  Protocol: NNTP
  Port: 119
  Secure (SSL): 0
  Code: 800ccc0e

  News of MS servers have been closed since last October. You can still access newsgroups with another server as eternal September, AIOE, etc., but the traffic is very light.

• VSphere client web - Remote Console error: unable to connect to the connection of mks (name of user and password) incorrect

  Hello

  I am running vmware Fusion on my mac computer. I created a domain with 2 vm ESXI, VSPHERE client and a DC inside the merger. My mac is not inside the area, but can access the area through clearOS router which is also inside the virtual machine. my mac has IP 192.168.2.x and my management in the 10.0.0.x field segment

  When I try to access a virtual machine on my esxi from my mac, I get the error failed to connect to the connection of mks (name of user and password) incorrect. I guess it has something to do with my mac is not in the area, but no idea how I can solve this problem?

  Thank you

  solved by adding the ip address of my ESXI in my macs hosts file

• I get a 'Secure connection' error failed with google stating "certificate contains the same serial number.

  When I click on a link to a google search, I get the "Secure connection" error failed in Firefox. He says, "please contact the administrator of the server or email correspondent and give them the following information: your certificate contains the same serial number for another certificate issued by the certification authority."

  I followed the instructions here:
  https://support.Mozilla.org/en-us/KB/certificate%20contains%20The%20Same%20serial%20number%20As%20another%20certificate
  and looked at this article:
  https://support.Mozilla.org/en-us/questions/1028103?ESAB=a & As = AAQ

  I uninstalled and reinstalled Firefox, deleted the entire folder profiles and reset Firefox. I see that the older (orphans) article points to my router. However, I have a new router and have updated their software. There is no button to add an exception (as stated in the article), so I can't just work around it. This problem does not occur with IE, so I have a hard time to believe that it is my router.

  How to solve this problem? I really want to change browser.

  Finally, I tracked the issue. The answer was found here:
  https://support.Mozilla.org/en-us/questions/1028985

  It turns out that Avast has a web shield that passes through its own verification of certificate https. Of course, this feature is not quite right and loses track of the certificates. Disable "https scanning" in the settings of Avast resolved the problem.

• Question of Safari and Chrome. indicates on the navigation screen. "An element of the Protection of the family filter does not work as expected. Restart your computer. If the problem persists, contact support.  Error: failed to hose CPI. »

  Question of Safari and Chrome. indicates on the navigation screen. "An element of the Protection of the family filter does not work as expected. Restart your computer. If the problem persists, contact support.  Error: failed to hose CPI. »

  Quit Safari, Chrome to quit smoking. If necessary Forcequit.

  Start Safari while holding the SHIFT key, select the menu Safari ClearHistory, then after this check that the homepage is the one you want.

  Do the same for Chrome.

  Close all browsers, restart the mac.

• Windows Live Mail reports an error he failed to then send the message.

  impossible / error in live mail

  When responding to posts of the Craigs list, which should be routed through the craigs list, but when I click on send e@mail and it is default to 'live' mail then fails to send with the error message.  What is going on.  I cannot "answer to job post, itc."

  Hello

  You will need to create a post on www.windowslivehelp.com for questions and assistance in connection with the Windows Live programs and services.

• This is the first time the following: failed: 1 update or the errors found Code 80070643. I followed through the Fix code he doctor. This morning the automatic update has not as well.

  This is the first time the following: failed: 1 update or the errors found Code 80070643. I followed through the Fix code he doctor. This morning the automatic update 4/16 showed failure: update for Microsoft Office PowerPoint 2007 (KB 24664594)

  Hi William,.

  First try the following article: http://support.microsoft.com/kb/971058.

  If this does not work, try this link: http://support.microsoft.com/kb/923100.

  While I'm not quite certain that the first will succeed, the second is a common and often recommended solution that has helped a lot with this error code.

  I hope this helps.

  Good luck!

• Error: Failed to initialize the window when trying to play the game

  Original title: failed to initialize the window

  Due to a virus I had to restart and make my computer cleaned.  I was able to play Iwin games before the clean and since I put everything back in but when I went to go play the game, it is said that the window could not initialize and suggested that I have change the depth of color and display.  What that means and what should these elements will be set to be able to play the game?

   
  Hi duchesszachman,
   
  1 are you play games online using the web browser?
   
  As the error message recommend to change the display settings and color. Try these steps and check the result.
  Step 1: Apply the best display settings
  a. see getting the best display on your monitor
  b. check if the problem persists.
   
  Step 2: Check the updates of Windows to see if there is an update available for the video card
  see automatically get recommended drivers and updates for your hardware .
  b. Once you have applied the update, restart the computer so that the changes take effect.
   
  Step 3: If the problem persists, reinstall the game and check the result.
   
  Visit our Microsoft answers feedback Forum and let us know what you think.