A 64-bit processor can behave as a 32-bit processor

Similar Questions

• How to use NI CAN behave DBC without a CAN Interface information retrieval?

  Hello

  I'm looking for some tips in order to extract information from DBC using the NI CAN without a CAN interface...

  Basically, I have a few DBC files and I would like to analyze in order to get the hierarchy of channels and Messages (and their related information, offset, scale, etc.).

  http://www.NI.com/white-paper/4294/en/

  The function CAN get names is useful and it is me according to the mode for the list of the channels and the Messages described in the DBC file. However, I have a major problem, and nothing less, I can't use the CAN Get property function... Because it featured a connector based on the task that I can't provide because I have no real and physical CAN interface, for now. This is why I can't have information on the channels either on messages...

  Is someone can give me a hand to solve this issue?

  Hello

  Thanks, looks like it works now.

  Thank you for your support.

  Yet, I think it's the XNET and CAN libraries are a bit difficult to handle, a bit powerful but difficult to treat first.

• OfficeJet Pro 8600 N911a: Can print / copy in colour, but not black

  Last night, tried to make a copy of the Officejet directly black and got a page of black streaks almost completely dark.  Tried to copy the same document in color and got a nice copy.

  Today, I tried scanning a document from hp on my computer software.  Got the same streaks.  Scanned in color and got a good clear scan.

  It may be dirt on the glass which would affect color and black too, right?

  Grayscale printing is fine.

  How can I solve the problem?

  No worries on forget everything shuts off and turns back on.

  I saw the power of the printer and the new solve a lot of problems, but it's the first time I've seen do so solve the problem with black streaks.

  One thing that I would check if it happens again is to make sure that the printer is plugged directly into a wall outlet, not a surge protector. Copy and scan functions can behave a bit strange if the printer does not have enough power.

  I'm glad that you all fixed. If you need anything else please let me know, otherwise have a great day!

  If this solves your problem, then please help others find this post by clicking on accept as Solution on my post.

  If you appreciate my help, so please let others know by clicking on the icon below my post thumbs up.

• Change cell numeric attributes can have strange default values

  These values seem a little surprising... I did not type the me... Happens if you change the type of data we'll say from unsigned char to double...

  But this isn't some meaningless: If you now - enter as a new minimum value 1e1000, CVI "corrects" it to-9.2e + 18...

  Also, it can behave correctly, sometimes, but shouldn't it always?

  It behaves better if instead of - 1e1000 first type you-100. If you enter then - 1e1000 it will correct the number - 1.0E + 300

  (Well, it should probably be E + 308...) but I better stop here

  

  Hi Wolfgang,.

  When I first open the Edit dialog box, data of the cell type is int64 and the range is (-9223372036854775808, 9223372036854775807). Those who are be the greatest values possible int64 can accommodate, and they are probably there because they were forced to the bottom of the default double range (-Inf + Inf), in a previous editing session.

  You then replaced the char data type, which replaces the beach (-128,127), which represents the beach under the constraint of a tank. But the dialogue box remembers your original preference was - 9223372036854775808 (9223372036854775807) and so, when you change the data type double in the same editing session, it restores this range once again, since it is now valid for the new data type. Except that it displays in scientific notation, since the double will automatically use this notation when the Exhibitor exceeds a certain size.

  It seems that you tried then to compel this return to the widest possible range of a double tapping 1e1000. It is a reasonable assumption on your part, but unfortunately this is a limitation of the CVI that it cannot compel a double entered into scientific notation ‑‑ does not recognize 1e1000 as valid a number. He keeps, so any value has been previously in control. If you had typed 1e308 instead, it would have worked, since it is a valid number. I agree that it is very inconvenient for you to "guess" what might be the maximum number, so that you can enter. All I can say is that if you really want to enter the largest possible value of double in the max/min controls, you need to enter '-Inf ' and '+ Inf' instead.

  Luis

  Given what I wrote above, should not happen the following (and I was not able to reproduce it): "it behaves better if instead of - 1e1000 first type you-100.. If you enter then - 1e1000 it will correct the number - 1.0E + 300 ". He should leave-100 in the control.

• Can I change my text box proportionally? I want to keep it in the square when the scaling!

  I love the sensitive provision, with the exception, why the text boxes cannot restrict or keep its proportions when I resize the browser window? I do a page portfolio, and in my home page, when I place the image, descriptive text rises. But when I resize the window it creates lots of space! For now, I did a lot of breakpoints where I manually scale the text box to be squared... Is it possible to make the balance of text box proportionally? I want to keep the square I adapt the browser window. Or is there an alternative? I like the SMART QooQee widget, but I need something for free.

  This is how it works now: www.ingridfredriksen.no

  Because the text itself is unresponsive, it is the only way, it can behave: A small, responsive text block requires to grow in length to display the full text, it contains. It is, how works internet. Otherwise the text would be "overflow" (which does not exist in the web).

  Incidentally: begins to create the wider first breakpoint and limiting to its limit text box height should prevent the empty space, because the box grows when the window is reduced and shrinks again, when it is maximized.

  If I look at your site on an iPad I n ' notice of any space unnecessary.

  A question: How did you create your main menu? I really like it!

• El Capitan has stopped my printer Canon MP600 to work

  El Capitan has stopped my Canon MP600 printer to work only in the last few weeks after an OS El Capitan upgraded.

  We was told by Canon technical support that refuse to update their previous printer driver Canon, just because Apple have interfered with their existing printer MP600 driver and made deliberately incompatible Canon MP600 printer driver with the last OS of Apple El Capitan, deliberately making useless Canon printer.

  What I can do, I can't afford to throw a little used, works perfectly printer and I have no money to buy another printer.

  How Apple can behave like that?

  Is there anything I can do for this printer works with this terrible operating system?

  Looks like in the site Web of Canon printer drivers arrested MP600 supported by beginning of Canon with OS X Lion mountains (10.8).

  So you have to have a summer of OS X Lion (10.7) or below. All you can do is to go to a support for Mac OS X version or buy a new printer (that you are not).

• Firefox is not responding

  I restarted the computer, Firefox starts but won't load any pages except in safe mode. It does not meet 'three horizontal bars' icon at the top left. I can do the Edit file... menu appears and the drop-down menus appear, but it wil not load pages.
  In safe mode, it behaves normally in safe mode allows.
  I scanned for malware with malwarebytes anti malware, nothing.
  I downloaded the installer in FF and then deleted Firefox using the applet to the Panel control, reinstalled. No joy.
  Help please.

  My problem was the tab Add on automatic unloading 0.8.9
  When I have something to update restarted and the bug caused my browser for not responding, but it worked well in Mode safe.
  So I reset Firefox but it took a few reboots so he can behave.
  I started to add rear modules, and when I rebooted after the addition of
  Auto unloading tab, the symptoms returned.
  I removed it and the symptoms went away.
  I am convinced.
  It is an Add on REALLY FUN, stopping crashing leak memory usage in previous versions of Firefox, but if the browser does not work, I can't use it.
  Fixed.

• Satellite L50-B-192 with Linux, no compatibility issues?

  Hello world

  I would buy a new PC, almostly Toshiba Satellite L50-B-192.
  In fact, I heard that a lot of people found that it is difficult to install linux, and many could she!, any body have had such an experience?
  Would you recommend buy me this model. I'll use for some applications, graphics, programming and development.
  Any advice will be highly appreciated.

  Hello

  I think that you will have a good experience in running a late version of Linux on this model. Just trying to get a 4 core...
  The biggest problem I've seen with L50 - B, it's that the maps non - Intel WLAN don't work under Linux yet.
  But your model appear to have an Intel WIFI card, so you should be fine.
  If you download and install the kernel 4.1 I think even shortcut keys can behave very well.

  Tom BR

• change of status

  Hi everyone how or why I see my friend change status to invisible or offline off ether if she has no internet at home?

  I thought that you can only see the other person change status if he or she has internet status available if no internet available should not remain even if nobody has no internet?

  If Skype is used on mobile devices, they can (and will be) change your online status. Generally, you'll need an Internet connection, mobile devices however lose the connection, can behave differently and just set your status in the distance (because of status work differently on these), after a period offline. This server side and do not require that you be logged (if nothing has changed recently).

  If no device is used, and the user has loged on Skype in the normal way, Skype status should remain offline until it connects again, raise the last State.

  The /showplaces command displays every endpoint the Skype account has, not very useful in this case, but maybe she could forget to connect somewhere, what /remotelogout has to take care of (in any chat window).

• Warnings of simulation for the SPICE model

  Hello

  When you use a template PSpice of an OpAmp AD8001AR of Analog Devices for an implementation of active filter, the simulator of the APLAC Trans gives me warnings below;

  Simulation - NLN:AD8001AR #2
  11:34:47 GBJT. Q1: RB<= 0,="" rb="" set="" to="">
  11:34:47 GBJT_PNP. Q2: RB<= 0,="" rb="" set="" to="">
  11:34:47 GBJT. Q3: RB<= 0,="" rb="" set="" to="">
  11:34:47 GBJT_PNP. Q4: RB<= 0,="" rb="" set="" to="">
  11:34:47 VCVS. EOS_s1: | R2 | must be greater than the minimum series, using R2 = 1e-006 Ohm resistance instead
  11:34:47 VCVS. EREF_s2: | R2 | must be greater than the minimum series, using R2 = 1e-006 Ohm resistance instead
  11:34:47 VCVS. EREF_s1: | R2 | must be greater than the minimum series, using R2 = 1e-006 Ohm resistance instead
  11:34:47 VCVS. ECM. R2 | must be greater than the minimum series, using R2 = 1e-006 Ohm resistance instead
  11:34:47 CCCS. FSY_s2: | R1 | must be greater than the minimum series, using R1 = 1e-006 Ohm resistance instead
  11:34:47 CCCS. FSY_s1: | R1 | must be greater than the minimum series, using R1 = 1e-006 Ohm resistance instead

  Looks like the Simulator to change resistance values in the model values non-null which I'm not sure will affect the simulated result. Someone can tell me if I should be concerned or not?

  Thank you very much in advance!

  Without a doubt, test the model. I joined a project that can help.

  While it is generally true that 1uOhm of resistance should not make a difference in a 'real' circuit, you're dealing with a behavioural model.  Modeling approach, the model may or may not be affected by small resistance added controlled sources.  A few branches inside these models can conduct current kA, amplify tensions 1000 x, etc..

  If the file has the extension .cir (i.e. import as a netlist PSpice and translated to the old format of netlist AWR), try to change the extension .sp, then import it a model HSPICE.  If it works, it can behave better.  Please see this chapter in our documentation for more information on importing cards: https://awrcorp.com/download/faq/english/docs/Users_Guide/importing_netlists.html

• Request does not give the same result according to the computer

  Hi all

  My problem is very unclear to me, so I'll try to explain it the best I can...

  So I'm almost finished my project, and I want to try it on another computer.

  In my project, I generate a txt through several file datas, can I use this file to display graphical information on a graph. It works very well.

  So I made a kit of Distribution following this tutorial: http://www.howtocvi.net/2011/12/how-to-make-distribution-kit.html

  I installed the .exe on another computer, and I launched the program.

  My problem is that, for the same data, I used previously, the program is not the same behavior.

  My tracks on the chart do not look like they should be.

  I don't know what are the causes that both programs use the same algorithm...

  If you have an idea, I'll take it!

  Thanks for your answers,

  Kind regards

  Jerome.

  Well, the example was just stressing that debug and release can behave differently, I thought not that it could directly apply to your situation.

  If I were you, I'd start checking the inizialization of the variables, since it is one of the biggest differences between these two scenarios.

  After that, I will add a few DebugPrintf to print relevant during the life of the program variables: DebugPrintf output can be seen in the window Debug Output while developing the program and in utilities like DebugView when running the executable, so you can compare his production in two situations.

  Normally, after some trial and error clarifies the situation and the appropriate corrections can be made to the code.

• Format of the crop sensor / subject remotely / calibration full AOV equivalent framework

  While using the crop sensor format, how can we adjust the distance of subjects to have the same field of view (AOV) in return, full frame, assuming that the current focal length in use has already been evaluated in order to take into account the standard of 35 mm film? I have the EOS Rebel SL1.

  character_stops wrote:

  Yes. I'm sure that the camera I have is the smallest format. That's why I think I need to experiment with several lenses to see how everyone reacts. I think that the format of my camera is 2 x 3, but I'm not completely sure.  After my image size more great cameras in Ps, I chose a preset of the photo, and it converted to 2 x 3 inches. Would this mean a culture factor much more than 7.5?

  Do not confuse "cropping" in Photoshop with the "culture lens/sensor factors" for your camera.

  Photoshop (and many other software image) have a number of current relationships preset image for purposes of culture aspectg. Choice 2:3 in Photoshop will make the area of the whole image that is produced by your camera. Then, you can resize a number of common paper sizes... 4 x 6 inches, 6 x 9, 8 x 12 inch and 12 x 18 (or 13 x 19) inch... that all share the same images of proportions.

  If you choose rather the proportions 4:5 in the truncation of software tool, some of the longest axis of the image will be deleted off the coast, but you can then resize the image to fit other common paper sizes such as 4 "x 5", 8 x 10 inch, 16 x 20 inches.

  There are also a few formats of common paper who don't exactly conform to one pre-defined aspect ratios, for example 5 x 7 inch and 11 x 14 inches. These are somewhere between the two.

  Your camera has a ratio of 2:3 (not 2 x 3). This has been fairly uniform among the 35mm film SLRs and was postponed to digital, too (for the large part... There are a few exceptions). The actual size of your camera sensor is approximately 15x22mm. The so-called "full frame" cameras also have a 2:3 format... is about the actual size of their 24x36mm sensor.

  In other words, the same proportion (IE ' side short vs long side ") is possible in different sizes (both in the sensor format or the movie... and printing of paper sizes). Don't worry too much on this subject the reference to large format... Which seemed to have been mentioned just to demonstrate that there are all kinds of "lens factors" that you can get caught up in the calculation, but this does not really much.

  Focal length does not change. 50mm is 50mm no matter what.

  But a 50mm lens on a format behaves differently than it does on another format. On your camera with sensor 15x22mm is a 50mm focal length lens acts as a nice "short telephoto.  Put the same focal exact on a digital point-n-shoot which has a very small sensor and it can behave as a very powerful, long telephoto.  If not, put this same 50mm on a digital camera to 'full frame' and it will act as a 'standard' lens (that is, not wide or Telephoto). Or, put this same 50mm on a camera film of medium format, which has an image 60x70mm area and this will be a lens wide angle. Finally, put it on a film camera of large format as a 4 x 5 (... equal to approximately 100x125mm inches) and the same focal length of 50 mm behaves like an extreme wide-angle.

  You say you have a kit lens... I guess it's a zoom. Probably an EF-S 18-55mm lens and an EF-S 18-135mm lens. You also have a 50mm 'first' (not a zoom) EF lens. If you set the zoom EF-S 50mm it will give exactly the same angle of view as the lens EF 50 mm Prime. The only difference is that the EF-S lens is specifically designed for smaller sensor cameras, while the EF lens is designed to give an image circle large enough to cover the area from a towards full frame camera.

  Yes, it is true, because they do not need to produce as big a circle frame EF-S or "cultures only" lenses designed for use on small photo sensor can be smaller in size, lighter and less expensive than the lenses made to cover the full frame sensor image area.

  If your kit lens is a 18-55mm, on your camera that provides a variable angle of view ranging from the wide-angle moderate standard to short telephoto. If it's a 18-135mm kit lens, which gives a little wider TV, a moderate telephoto.

  I hope that makes sense!

• Remote Desktop. Why the differences?

  In this case I use Remote Desktop to connect a system from Vista Home Premium to Windows XP Professional on a local network.  Still, it establishes a connection, but can behave in 3 different ways:

  1. the session starts and works very well.  After entering the password (I ask the password), it goes directly on the desktop of the remote PC

  2. the session begins, then I am taken to the login screen of the normal remote PC (what you expect to see if you were working on this PC).  When you enter the password, it then goes to the desktop.

  3. I get the blah "can not load your profile...". ", where Windows will load a temporary profile that takes you back office.  Logging and lumbering back to still seems to work, i.e. log on normally.

  So, no show stopping issues, but why?  Certainly why the difference between 1 and 2?  Thoguh that you arrive at the same place, with 2, you get also present with all the other user accounts on this computer.  For my part, it is not a constraint, but what happens if I don't want to have other possibilities of connection presented?  Remote Desktop Client indicates the account to Log On with, so why present all others?  On the question of the profile, there are a lot of intel available, but I have yet to find the cause in my configuration.  It's exhausting rather than as a problem, but I would be very happy to eliminate this behavior.

  Hello

  You can check out the following link and check:

  Remote Desktop connection: frequently asked questions

  The problems of desktop remotely

  Hope this information is useful.

• Shortcut Ctrl + Shift + arrow key doesn't seem to work

  I only started using Windows 7 a few days ago (new computer came pre-installed), and I seem not to be able to select text by using the shortcut keys Ctrl + Shift + key management (to select text). Because it is a little the keystone of what I do for a living (writing and editing text), I'm naturally upset.

  I don't know if it's because for one reason or another the shortcut no longer exists in Windows 7 (but I expected more hits from google and General hoohah if this is the case), or maybe because I mucked with the locale of Windows when he started everything first. After all, Ctrl + Shift is here as a possible shortcut to change the settings (which suggests a potential conflict). I had trouble original, namely how to replace the default Windows come with locales and eventually remove and reconfigure the settings several times until I got what I wanted. Maybe I saw something up along the way without realizing it?

  Right now I use the keyboard layout United States (native English), UK regional settings (date time, etc.), but have a German version of Windows, if it has been initially implemented differently. I made sure that Ctrl + Shift is NOT selected as a shortcut to change the language settings - basically he has that one language, set up and all the shortcuts are disabled in the window.

  I had also several popups triggered inadvertently accessibility and have no idea how I responded to them. I disabled everything that I could find in this regard to little too (as again the Ctrl and shift keys can behave differently).

  I have two keyboards, and both have the same problem; I tested this on a XP computer, and the shortcut works very well-only is not the keyboard.

  I found someone else asking the same question elsewhere on the net, but it is impossible to find an answer...

  So:
  The shortcut still exists (I guess for this)
  No idea how to get it back?

  Solved the problem - was not Windows, it's the stupid software that came with my screen using the same shortcuts. Disabled the software, everything works again.

• How test a BB10 playbook app or install the latest OS BB10 in playbook?

  
  

  The Alpha of Dev and Playbook didn't and don't use the same OS versions because they are different hardware.

  You need the latest version of the Playbook SDK and build with it.

  As far as I know that the last sim playbook and download the latest Públicos for playbook is already "BB10", but there may be updates on the playbook after the BB10 SDK for alpha dev's final (11 December?).

  From: just ripple point playbook BlackBerry WebWorks SDK for Tablet 2.2.0.5 instead of 10 BlackBerry WebWorks SDK 1.0.3.8 (or the last one).

  The same code can be generated for both with minor variations in the config.XML for options such as orientation.

  Things such as canvas full screen, swf, audio files can behave not the same on the two OS right now.