Change cell numeric attributes can have strange default values

Similar Questions

• How can I set default values to set the Mode in the config of the AO?

  Hi, how can I set default values to allocate mode in the config of the AO. To be precise, in the attached vi, I need to set the Mode allocate in the AO Config to ' use FIFO memory (6) ' if the value inside the structure of my case is false and 'no change (0)' if the value inside the strusture case is true.

  Create two constants for Mode allocate input (right click > create > constant). A place in the real case of the structure of the case and place it in the case of false. Their son in the same tunnel (border of the structure of the case), then the tunnel of wire to the pole to allocate the AO Config Mode. I do not have traditional DAQ installed, but who should do it.

• Can set the default value in the field with the rule

  I have a rule to set the xWebStartDate to dateCurrent(), but it does not work. I disabled all other rules, so there is no conflict. This rule is only to try to fix the date of xWebStart, nothing else.
  'Use the activation of rule condition' is checked. I selected 'Action of use' and 'check in Selected. I have added the xWebStartDate field and I have a default custom
  < $dprDefaultValue dateCurrent () = $ >
  Thus, it is for content that already exists and someone is to check in a new revision.
  I know that my rule works, because I added the dDocAuthor field and set it to "infOnly" and that works. This problem occurs if the action is updated also. But for check-ins again, I put the xWebStartDate to dateCurrent successfully.
  
  Update: it's existing content, which already has a xWebStartDate. The rule must replace the existing value.
  
  Edited by: ironarm February 1, 2013 17:58

  In your case, you cannot use default value for the new revisions, because your content is already a value for the metadata field.

  Alternative:
  (1) change your rule
  (2) on the general tab, check "Use activation Condition rule" and click Edit
  (3) in 'Edit Activation Condition' window, click on the tab "side effects".
  (4) add the following...

  <$if isCheckin $> [[%or you can also use (IdcService and IdcService like "CHECKIN_SEL_FORM")%]]
      <$xWebStartDate=dateCurrent()$>
  <$endif$>
  

• How to have some default values in all the elements that are empty in the xslt file.

  Hello
  
  Need help:
  
  Scenario:
  
  After transformation .xslt, there are certain elements that are mapped but left empty. I want to give him some defaults as '0'. How to do this.
  
  Thank you.

  you could do this:

  http://StackOverflow.com/questions/2791295/setting-default-values-for-empty-nodes

  and if you want different default values for some nodes to which you may use local-name and some other default settings listed

• How can I set default values in the Labview Advanced Settings the TestStand step settings tab to run a VI on a remote PC?

  
  
  

• default value for af:richTextEditor

  Hello

  Each time that nothing is written af:richTextEditor null is copied on the screen.

  Is it possible to specify, black space or any default value if nothing is entered in the af:richTextEditor.

  I tried to do with required = "real immediate ="true", but in my usecase af: richTextEditor is using declarative and can be called multiple times." I also tried with renditions but not sucessuful with my use case.

  I'm looking for solution where I can have a default value of af: richTextEditor, where if user man nothing that default (black space) is displayed.

  Sorry that I've updated my post, the discussion has changed what I said

  Use:

  private String value1 = "" ' & nbsp; '; "

  Remove the space between the & and the nbsp;

• Is there a way to FF4 can I change the layout of the screen so I can have the tabs just above the pages, as in FF3.6.18?

  Hello

  I run FireFox (FF) for years and love. I'm running FF 3.6.18 am thought and upgrade to FF4. However, a friend upgraded to FF4 and I notice that the tabs for different pages are very high on the screen, away from the pages concerned, instead of just at the top of the page being displayed, where they are more easily found and used. Having the tabs at the top is really annoying and it is a change that should never have been done.

  My question is this: is there a way to FF4 I can change this so I can have the tabs just above the pages, as in FF3.6.18?

  Thank you very much
  Al

  Yes! Click the new tab button ("+") or a blank space after the last tab and uncheck tabs on top in the context menu.

  If the tabs on top does not appear there, you can use the view menu:

  Menu view > toolbars > uncheck tabs on top

  If you have the Firefox orange (abbreviated menus) button, press the ALT key, or press F10 to display the classic menu bar to join the view menu.

  (Oh, it will make more sense after you install Firefox 5 does it by looking at Firefox 3.6)

• Try to divide the two numeric fields and have response in the third field num

  Okay, I do something wrong and can not understand it.  I use the code below in the field of PSF of my form to divide two different fields digital and for the life of me I can't understand why it does not work.  I guess it's something simple.  I downloaded the form.  Please take a look at the form and me know where I am on leave.  You almost have something simple and I just don't see

  < activity = "click on" name = "event__click" >

  < script contentType = "application/x-javascript" >

  If (NumericField13.isNull |) NumericField13.rawValue == 0)

  {

  NumericField28.rawValue = '0 '.

  } elseif(NumericField27.isNull ||) NumericField27.rawValue == 0) {}

  NumericField28.rawValue = '0 '.

  } else {}

  NumericField28.rawValue = NumericField13.rawValue / NumericField27.rawValue;

  }

  < /script >

  < / event >

  I think it has something to do with the way which is made the division.  I think he's trying to divide by zero, although at this time I tried several different if/then instructions and can't see where I go into the equation, so I tried the above only a click again and could not get that to work either.

  Thanks in advance for your help.

  Justin

  First thing is that you have this script running on the click... event so that your code will not run until a user clicks on the field. I suggest that you put it

  the calculate event. In this way, every time one of the other values named in the formula change t

  hen she'll recalculate this field.

  Second, there was a script error in your formula... I modified to look like this (it seems just more logical that way to me)

  If (NumericField13.isNull |) NumericField13.rawValue == 0) {}
  NumericField28.rawValue = '0 '.
  } else {}
  if(NumericField27.IsNull ||) NumericField27.rawValue == 0) {}
  NumericField28.rawValue = '0 '.
  } else {}
  NumericField28.rawValue = NumericField13.rawValue / NumericField27.rawValue;
  }
  }

  Third, your shodul of NumericField27 have a default value 1 or you should make its value acheck so that she does not have a possibility to get a 0 or your division will fail.

  Finally, shodul you rename your fields have insstead of generic names like numericField XX more descriptive names. Many people like to know the type of field to the name then, instead of NumericField27 SQFT_NumFld what would you say? With this technique, I can say immeadiately field in which you speak (Square Footage) and its type (numeric). Just my 2 cents worth!

  Paul

• How can you specify the default value for the undefined array elements

  According to aid LV, the tables have two default values, the normal default value and the default value for the undefined array elements.

  I assume that there must be a way to specify the default value for later, but I can't find it anywhere.  Any ideas?

  I know that you can drag the item out of the table container.  Change the default value on this scalar element.  Then drag the item in table tank.

• Basic attribute default values

  When you create a structure of the event, I noticed that you can specify values by default when you use the dbms_rlmgr.add_elementary_attribute attr_defvl. I've done this and can see my default values appear in the column user_expfil_attributes default_value.
  
  However, I don't see anything in the way of documentation or examples on how to use default values, once they are specified. It is possible to specify an incoming event that is missing an attribute value and then have the engine, use the default value instead?
  
  Thank you
  Scot

  Scot,

  The values specified for the type of object are mapped to parameters in the order listed. So, it is a general practice to set the attributes with values default to the end, so that when only a partial set of attribute values are specified, there is no ambiguity. You can still use the extended syntax (methods 4 and 5) to assign values to specific attributes.

  Kind regards
  -Aravind.

• Default value in OT

  Hello

  In the database, we have fields that have a default value. I checked my OS and the default value is not set. So I wonder if I should manually or if it's supposed to be synchronized with the DB schema. I ask because I have validation error when validation changes, and mistakes are to field that are necessary but not displayed in the interface user.

  JDev 11.1.2.4

  Thank you

  Set the default values in the area and you're fine, for example using groovy.

  Our remove the constraint attribute in the eo zero and let the db by default.

  Timo

• No default value for the security group

  Hi all
  
  I want to Group (SG) of security did not have a default value, so that users must select SG every time they check in new doc. At present, the default value for the SG is the 1st value, which can make the user forgot to change the SG and ultimately, check in with SG bad doc.
  
  Someone knows how to do this? Thanks in advance.
  
  d.s.

  Hello

  You can set ForceSecurityGroupChoice = true in config.cfg and restarts the CS to force users to choose security whenever they go to the archiving of documents.

  Thank you
  Srinath

• selection list dynamic default value

  Hello world
  
  I have a question about the dynamic selection lists.
  I have a report of a table that displays records. Each record has different versions of data. So when you click on a folder you get to another page where you get some information on this record and where you can select the version of this information (using a selection list).
  
  The selection list works very well and is set dynamically as follows:
  
  Select distinct b.SID display_value,
  return_value a.version_id
  cn_pl_version a.,
  cn_pl_std_peplanung b
  WHERE a.version_ID = b.version_id AND
  b.pe_id = "& P6_HELP_PRODET."
  a.version_id desc order
  
  
  My problem is that when I click on a folder that I always get the report filled with the oldest version of the current record, so I always choose the most recent version to the list manually. I always prefer to have the most recent version in the report.
  
  The report query is:
  
  Select
  ....
  ....
  
  (select sum (stunden) in cn_pl_std_peplanung t02
  where abt_id = '10'
  and t02.pe_id = t1.pe_id
  and t02.version_id = t1.version_id
  and t02.idee_id = t1.idee_id) stunden_ir;
  
  (select name from cn_pl_version u01
  where u01.version_id = t1.version_id) Version
  
  of cn_pl_std_peplanung t1, cn_pl_projektelemente z1, u1 cn_pl_version cn_pl_projektidee s1
  where t1.version_id = ' & P6_VERSION_WAHL. »
  and t1.pe_id = z1.pe_id
  and z1.pe_id ='& P6_HELP_PRODET. »
  
  Group of t1.pe_id, t1.version_id, t1.idee_id
  
  
  
  
  ' & P6_VERSION_WAHL.' is the element of the selection list
  ' & P6_HELP_PRODET.' is the ID of the current record
  
  I don't know if you understand my problem, my English is not the best...
  
  Thanks for any help!
  
  Patrick

  Hi Patrick,

  What value choose it show list, when you create a branch to the page? That's the good?
  If not, you must change your selection list, that the correct version is selected by default. You can set a 'default' value when you set the source of the element.

  Otherwise, you may configure a sample application to http://apex.oracle.com.

  Best regards
  Chrissy

• The default values on the retail block for dummy record gets inserted in detail blk

  Hi all
  
  I have a master block
  a block of detail and a detail for detail block block
  
  For every master I have or have no certain records in the block of retail
  
  for each master, I have a few detail records
  
  for each detail record I may or may not have the corresponding detail records
  
  Let's take an example
  I navigate a primary record to the detail record.
  in the 3rd block of retail, there is no record for the record in detail, but I have some default values.
  
  Now I navigate to the 3rd block of detail and I do not insert records and then exit the screen
  
  Here oracle asks me to save all the changes I made (I did no changes)
  and by clicking on Yes, there is a dummy record is created for a 3rd detail record
  
  Please help me
  
  Thank you

  This is the default values are to mark the block as being changed. That's why you get the message "do you want to save the changes.

  I suggest that you fill out elements of the base with the default values table and fill out the matching elements from the base on a prior insertion trigger table.

• Spry form validation Date with default value error

  The spry form validation below was created with DW CS6

  I created an HTML form and displayed with PHP to a MySQL database.  One of the lines of form is to enter a date.  This line uses a 'out of the box' sprytextfield data validation without changes to its CSS or JS:

  HTML

  < span id = "sprytextfield1" >

  < label for = "servComDate" > Date beginning? < / label >

  < input type = "text" name = "servComDate" id = "servComDate" >

  < span class = "textfieldRequiredMsg" > a value is required. </span >

  < span class = "textfieldInvalidFormatMsg" > Invalid format. </span >

  </span >

  < script type = "text/javascript" >

  var sprytextfield1 = new Spry.Widget.ValidationTextField ("sprytextfield1", "date", {index: "00/00/0000", format: "mm/dd/yyyy"});

  < /script >

  On request, the form value is captured via PHP and date format is converted to a format of MySQL before entering in the database.

  PHP

  $servComDate = date ("Y-m-d", strtotime($_POST['servComDate']));

  It all works perfectly.

  Now, I created another page with a HTML form to change information.  First, PHP takes the field in the database and converts it to MySQL format to the format used in the sprytextfield above, in which it was created.

  PHP

  $servComDate = strftime ("% m/%d/%Y", strtotime ($row ["servComDate"]));

  Then the HTML form is filled with existing value

  HTML

  < span id = "sprytextfield1" >

  < label for = "servComDate" > if the Service is coming soon, do you know when the service will begin offered? < / label >

  < input type = "text" name = "servComDate" id = "servComDate" value = "<?" PHP echo $servComDate;? > ">"

  < span class = "textfieldRequiredMsg" > a value is required. </span >

  < span class = "textfieldInvalidFormatMsg" > Invalid format. </span >

  </span >

  By filling in the form with existing value appears with the right in the box format, it shows these 'mistakes ':

  value is required. Format invalid.

  As I said above, I have not changed the CSS or JS that is loaded with the Spry textfield, so I don't get that here.

  I'm obviously something wrong with pre-filling a Spry textfield with a default value.

  What is the real need have a default value on a Textfield of Date Validation Spry?

  Thanks in advance!

  Make sure that, in the page change the constructor looks like

  var sprytextfield1 = new Spry.Widget.ValidationTextField ("sprytextfield1", "date", {index: "00/00/0000", format: "mm/dd/yyyy"});

  The following works fine for me

  ">

  A value is required. Format invalid.

  GRAMPS