Warnings of simulation for the SPICE model

Similar Questions

• Import the SPICE model for transistor BJT BFP720F in Multisim

  Hello

  I'm trying to get the SPICE model for the BFP720F transistor provided by Infineon to work in Multisim.

  I have attached the template as provided by the manufacturer.

  If I import it as-is, I get error messages "invalid node identifier '<4>'" (I have translated that German, it might not be exactly this message in the English version).

  So I tried to replace all the "<4>" with "4", which seems to help, but now the error is "adjusted temperature setting"VJC (PC)"negative" and "incorrect use of the parameters of the model. Now I don't really know what to do with it.

  Is the template provided in the wrong format? I somehow can it in the right so I am able to use it?

  Because I need for my project semester in College, any help would be much appreciated.

  Thanks in advance!

  Hi NikoNR,

  When writing a detailed description of what I did exactly with the Wizard component, the component again to create in Multisim from scratch, I found that there are different SPICE models provided in the package for use with AWR MWO. They have a different file extension, but are normal text SPICE inside files.

  It turns out that they actually work with Multisim. The difference is small, there is only one temperature (TNOM) setting that is absent in these models, distinct from the "general" I first tried to use. It seems that Multisim had a problem with this setting, leading to the error I encountered.

  Anyway, the problem is solved now. Thanks for your help

  Good day

  (The now much happier) EE-student

  ----

  Edit: I have attached the SPICE model, that I ended up using, in case someone at - he never met a similar problem. The only change I did this, is to replace '<4>' with '4' in the part of the diode (single occurrence here). I had to zip to download with his original extention (.mdl).

• Is it possible to transfer music from an ipod 4G for the new model?

  I got my ipod touch 4g since 2010 and I was too cheap to upgrade. Now that the battery life has been emptying faster than ever and high sleep button no longer works, I think its time to finally switch to this new model.

  The bad part is that for the last 6 years, I have collected 12.6 GB worth of music on my ipod touch with nearly 85 per cent of it related to the device itself and not on my pc. I usually have the removed from the computer as Itunes would always keep always on my ipod touch as long as the songs were always listed in the library.

  I was wondering is there a way to transfer my music from my old ipod touch to the new model?

  Your i-device was not designed for unique storage of your media. It is not that a transfer backup device and media has been planned with you keep a master copy of your media on a computer that is in itself independently supported against loss.  To use a device with a different configuration, you pass the old library from a computer or a backup directly in the new configuration, not the device to the library. Synchronization of media isn't a way, computer to the device, update the contents of the device to the content on the computer, update or restore the content on a computer. The exception is iTunes Store purchases that can be transferred to a computer.

  Redownload or transfer your iTunes Store purchases an iPhone, iPad or iPod to computer - https://support.apple.com/en-us/HT201267 - 'this feature only works for content purchased from the iTunes Store. From iOS9 is more apps that now need to be re-downloaded directly from the store.

  To transfer other items from an i-device to a computer, you will need to use third-party commercial software.  See this document in turingtest2: recover your iTunes library from your iPod or device iOS - https://discussions.apple.com/docs/DOC-3991 even this method can fully recover what you originally had in the library. For example, in order to save space during synchronization if you had converted music files at a lower rate, or photos at a lower resolution, it is these lower quality files that will pick you up.

  If you subscribe to the Apple music, titles that are not part of the content that you have purchased or downloaded may not be transferred and must be downloaded directly from iCloud.

• Drivers for the replaced model (Tecra A6)

  I used to download the drivers for my * Tecra A6 (PTA61A - 005 00G) * from the site Web of Toshiba Australia; However, all sites Web from Toshiba worldwide list is more this model in particular.

  * Can anyone offer another way to download all the required drivers for my Tecra A6? *
  Grateful if someone can help!

  I m really wondering why Australian download page doesn't have a few option archive.
  On http://www.toshiba.eu/innovation/download_drivers_bios.jsp European download page under archive option you will find Tecra A6 with PTA61E part number. That is the European model, but I believe similar or perhaps even that the Australian model then you can try to download the drivers from there.

  Check it out and post comments.

• Seagate Hard Drive Firmware Update for the drive model: ST1000LM024

  I have (HP Pavilion dv6-7180se Entertainment Notebook PC). All the drivers for this model installed correctly except the drivers Frimware (Seagate hard drive Firmware Update) and (PLDS Optical Drive Firmware Update). the first one says "this hard drive model is not supported. Model = ST1000LM024"but my hard drive came from the factory, so what is the practice solution to install this driver? images .view of problems:

  This is to seagate:

  and for PLDS:

  Need help. Thank you.

  What mean of these messages, is that these "Firmware updates" do not apply to material in your specific computer. The two "Seagate Firmware Updates" are respectively for the hard drives of 250 GB / 320 GB and 500/750 GB hard drives. Your computer comes with a 1 TB hard drive, which is not subject to updates of the firmware. The "PLDS Optical Drive Update" is for another drive to CD/DVD only installed in your computer and also does not apply. There is no further action to take... Do not attempt to install these updates of firmware, because they do not apply to the hardware in your computer.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• How can I order recovery discuss for the laptop model

  I need to order a CD of replacement for my laptop model # g60-519wm and was informed by the customer service that I have to do it from the hp Web site

  Hello:

  The HP website doesn't have a recovery disc for your laptop.

  There is no connection with the control of your model recovery media must have presented at the link below.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=4039377

  However, you can still get a set of recovery discs from this provider on the link below.

  http://www.computersurgeons.com/p-17146-recovery-kit-588820-001-for-HP-model-number-G60-519wm.aspx

• Simulator for the BB Bold 9000

  Hello again"

  Do you know what version of the JDE Simulator for BB "BOLD" of?

  TNX

  JDE 4.6.0.12 has 9000 Simulator.

• How to set a password that is customized for the linux model

  Hi, I tried to put a personal password for the model of linux but every time I deploy the model of linux, that the password is always regenerated by VCD;

  Pls advise

  Hi, can you confirm that you have managed to put the rest of the options mentioned Tim?

  You should see the option, if you enter the vApp and right-click on the virtual machine, you are trying to reconfigure? See the attached capture screen...

• can we create specific diagrams of logic model for the relational model?

  Hi-
  
  I created several diagrams of relational model. I want to create the logical data model diagram for each of the relational model.
  Is it possible to do?
  
  Currently, it is always associated with a logical data model diagram. When I create LD for the 2nd, it is always update the same diagram.
  Please let me know.

  Hello

  Yes you can have the diagram in the logic model. Check there titled "Subview as" at the top right of dialogue engineering - select it and subview will be created in the logic model corresponding to the main schema to your relational model.

  Philippe

• Equivalent of PreUUTLoop for the parallel model

  I am building a test sequence to test two DUT in parallel, on a station where some of the facilities will be shared.  I want to initialize all the equipment BEFORE the start of the exectuion of tests and even more specifically before the individual PreUUT of each execution taken step.

  It was logical to my approach "Initialize hardware" in the "PreUUTLoop" sequence reminder in an original design that used the sequential model. It must only be done once.

  Is there a reminder of similar sequence in the parallel model in which I can move step 'initialize hardware "?

  I put in the SequenceFileLoad callback.

• How can I change the background color for the entire model

  I'm trying to change the color of gray background for the blue container. I tried to find the location of this gray background in the CSS, but failed.

  Could someone help me understand what line in the CSS file is responsible for the color of the container?

  Thank you

  Anna

  No worries.

  It seems that the background color is controlled by this tag in your style.css file:

  body #header body #footer {}

  background-color: #343434;

  }

  This can be consulted on line 1523 of this file. Change only the blue that you want and you should be good.

  I hope this helps.

• Upgradable GPU? Graphics for the next models?

  Hello!

  I think to buy a satellite M40 that precisely fits my budget. The only problem is the X 300 128 MB graphics card which is in fact the slowest in ATI series x is there a possibility or the possibility of an update of the graphics card or through society, either with an authorized service provider? I know that there is the X 600 in some models that would be a good change from the X 300. The X 300 and X 600 will be available/expandable so that they can be changed? (I know that sounds a little crazy, but some other laptop producers are already doing something similar. But I will not buy another laptop...)

  My second question is about the GPU by Toshiba next models that are coming in the next few months. Does anyone know if Toshiba will keep the X 300 on their models, or if they use a card more strong as the X 600, X 700, or even X 800? I prefer wait a month or so to buy something that I regret buying after a few months.

  Thanks in advance for your help,
  Antonakis

  [Edited by: admin on 30 June 05 07:22]

  Hello Antonakis

  Sorry, but the replacement of the graphic card or same CPU is not possible because the graphics card is fixed on the main map. You can upgrade just RAM or HARD drive.

  One of my friends has the same unit. It's a beautiful machine with display fabulous and beautiful design. If you buy, be careful because tools & utilities CD is not available, and you can create alone. To create your own start the Toshiba Assist and go to Protect & Fix.

  Sorry but I found no information on some future project and new hardware components that can be used in new models of laptops.

  Good luck!

• Anyone has a balun for multisim spice model?

  Why is there no balun in the component library?

  Thank you, if you have a.

  David B

  dbur,

  A balun is essentially a specialized transformer model.   As a good un bon resume summary of these types of baluns, please see this link:

  http://www.Minicircuits.com/pages/BalunApplicationNote.htm

  Since you can create an ideal transformer simply using sources controlled, attached is a balun 'Ruthroff' ideal, created from 2 ideal transformers (so it works in both directions) using the same technique.

  Using the modellers of Multisim (in Multisim PowerPro) or by creating these transformers with realistic values, it is possible to create SPICE balun transformer models ' real' models.   There are several previous messages which discussed the creation of models of processor to help you.

  http://forums.NI.com/NI/board/message?board.ID=370&message.ID=568&query.ID=503517#M568

  Kind regards

  Pat Noonan

  National Instruments

• Error in deployment of Simulator for the 10 Blacbkerry 'synchronization and application launch.

  I use Momentics® IDE for BlackBerry Version: 2.0 Build id: v201310251603 with Simulator10.1.0.4828.

  Momentics seems to connect and paired with success to the Simulator. When I click "Run", it starts the process of packaging and deployment, but get the error in "synchronization and launch the application" part. There are different errors but no useful information in the dialog box. Here are two samples

  Failure of deployment: Info: failed to get a connection QConn, sync disabled
  Info: Sync disabled, packaging full bar required for installation
  Info: Sending request: INSTALL_AND_LAUNCH
  Info: Action: install and launch
  News: Native debugging: on
  Info: File size: 304312
  Info: Installing com.example.BB10TrackerSample.testDev_ackerSamplea7864132...
  Info: Treatment 304312 bytes

  #2

  Failure of deployment: Info: try using the synchronization failed: connection reset
  Info: Sync disabled, packaging full bar required for installation
  Info: Sending request: INSTALL_AND_LAUNCH
  Info: Action: install and launch
  News: Native debugging: on
  Info: File size: 304312
  Info: Installing com.example.BB10TrackerSample.testDev_ackerSamplea7864132...
  Info: Treatment 304312 bytes

   

  Please refer to this article for more information about this problem and a workaround.  Note that this problem is resolved in the new versions of BlackBerry 10.

  Application deployment can hang or fail after OTA update to 10.1

• Exchange for device dev Alpha: I can't wait for the Keyboarded model?

  I did some research on Google and Council research and could not find the answer. When alpha devices Dev 'time bomb' in Q1 2013, will I have to exchange it the model phone touchscreen? Or I'll be able to wait until the 10 BB with a keyboard device becomes available?

  For me the keyboard == superior!

  When done RIM Exchange, they will swap the course Alpha of Dev of devices for a special version of the touchscreen device developer. At this point, RIM didn't say anything official out of it, but at this point, I guess the current answer is no. The only way to know for sure if is to wait and see if RIM made an announcement.