A case with a magnetic closure shut down an iPhone?

Similar Questions

• I have a problem with the computer is shut down.

  Original title: shut down the computer

  I pressed the stop many times but nothing appears. What is the solution to this problem?

  I pressed the stop many times but nothing appears. What is the solution to this problem?

  Windows 7 now allows you to change the behavior of the action of the right power button in the start menu. No record no hacks without control panel. Go to the taskbar and start menu properties. Select Start menu tab and you will find the option to change the power button function on. You can change the behavior of power down for

  • Change user
  • Close the session
  • Lock
  • Restart
  • Hibernate
  • Shutdown

  This is a good option if someone tries to stop power button and it locks the computer nicely.

• Problem with vista Media Center shutting down downloading 'TV configuration Option '.

  Hello
  I can't configure my TV tuner card to run in MS Vista Home Premium - Library. Whenever I get to the 'download TV Setup options' screen - after a few minutes of press simply turns off and restarts - giving no error message or anything like that!
  System: AMD Phenom 8400 X 3, 2 GB of RAM, ATI Radeon X 1650 card mother Foxconn A74ML-K (drivers 8.593 100), nebulous PCI TV tuner card with the latest drivers BDA (drivers work OK with Nero Home).
  For any help or suggestion would be welcome.

  Hello
  Thanks for your help. I made a 'clean' installation and the issue has been resolved.
  Concerning
  RJG

• My computer shuts down is no longer with button closure

  My computer shuts down is no longer with button closure. Works only with button on the computer case.

  * original title - system update updates microsoft windows *.

  Hello

  1 are there any changes or updates made on the computer?

  2. what operating system is installed on the computer?

  3. what happens when you try to shut down the computer?

  4. do you get an error message? If Yes, what is the full and exact error message?

  Step 1:

  Try restarting your computer in safe mode and check if the problem persists.

  a. restart your computer.

  b. when the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows Advanced Startup Options.

  c. using the arrow keys, select the Safe Mode option.

  d. press the Enter key on your keyboard to start Windows Safe Mode.

  e. when Windows starts, you will be at a typical logon screen. Connect to your computer and Windows goes into safe mode.

  f. check if you still have the problem.

  If it works fine in safe mode try performing a clean boot in order to find the cause root.

  Step 2:

  See the article about how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: when the diagnosis is complete do not forget to reset the computer to a normal startup.

  If the problem is not resolved, please provide more information to help you best.

• my keyboard has sometimes unresponsive, despite verified the above. Then it works again after I have shut down and restart my mac. is this normal? If this isn't the case, that due to an application? for example, I installed photoshop and use it all the ti

  Jin

  Sometimes, my keyboard stops responding, despite the checkist troubleshooting.

  Then it works again after I have shut down and restart my mac!

  is this normal? If this isn't the case, that due to an application? for example, I installed photoshop and use it all the time... also openoffice document prog...

  What else could be?

  I just replace the keyboard with a new one, but the problem persists.

  my mac has also been in mac repair and they found nothing wrong.

  Thank you!

  Please run and view a report of EtreCheck http://etrecheck.com/

• When I try to shut down my computer with Firefox running it hangs and stops the shutdown process.

  When I try to shut down my computer with Firefox running, it does not close properly during the closing. Instead, it crashes (as described in this article) and will continue to do so until I have stop the shutdown process and close it manually, where it will still not respond. There is the substantive issue. Here is the list of the relevant data to identify more precisely:

  On the list of programs is still active during the closure, the window of Firefox starts only appearing once as it should be, but a few seconds after starting to hang, it begins to appear a second time on the bottom of the list, with the specific name of the page is a duplicate of whatever it is on the original.

  This problem does not occur in safe mode, but it is not caused by one of my addons either, as I figured out after disabling all my addons with tools > Modules rather than the safe mode and still the problem.

  He is listed as that passes several times a week, but that is simply because that's how many times I forgot to close Firefox before pressing 'closed' and leaves the room without bothering to check it works. It happens whenever I try to turn off the computer with Firefox is running well.

  See this article--> occurs not in Safe Mode

  Check and say whether his work after turning off hardware acceleration.

• Suggestion: Firefox would not hold up to a shut down windows with a close multiple tab dialog box.

  I didn't know where to send a suggestions, so he posts here. Please redirect it to the appropriate location.

  When I shut down windows and firefox works with several tabs, it pops up a dialog box and prevents the closure of windows. Last Friday, I shut the computer down before leaving work and found that it was still on when I went back to work Monday. Reason - Firefox.

  I prefer computers stop when I am away for an extended period of time to save energy.

  Tools > Options > tabs: [] "warn me when closing multiple tabs".

• Problems with the blue screen of death (when my computer is shut down)

  I get a blue screen of death on occasion, when shutting down my computer (Windows XP, Dell Vostro). It started happening after I installed the latest version of the Synology NAS software. This is the message: BCCode: 100000d 1 BCP1: BA3F1F20 BCP2: 00000002 BCP3: 00000008 BCP4: BA3F1F20 OSVer: 5_1_2600 SP: 3_0 product: 256_1. Additional technical information: C:\DOCUME~1\admin\LOCALS~1\Temp\WER4098.dir00\Mini021112-01.dmp and C:\DOCUME~1\admin\LOCALS~1\Temp\WER4098.dir00\sysdata.xml.

  Not sure if it is related to the installation or if it is another problem. Any advice would be appreciated.

  The minidump file showed a DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1) referencing the usbccgp.sys (common class generic Parent Driver USB):

  BUCKET_ID: 0xD1_CODE_AV_BAD_IP_usbccgp+ 1f20

  The spoolsv.exe (print spooler service) is the process that crashed.

  You have recently installed a USB printer?

  In any case there may be a problem with the USB stack in Windows XP Service Pack 3 so I recommend you to install the following fix can correct a problem of 'timing' of USB that can be useful for the error you receive:

  http://support.Microsoft.com/kb/969238

  There is a link at the top of the article to request the hotfix.

  There was a driver of Synology (busenum.sys) loaded during the crash, but it does not appear to be involved in the accident.

• STOP: c000021a {fatal system error} the initial session process or system ended unexpectedly with status 0 x 000000001 (0xc0000034 0x0010038c). The system has been shut down

  I am trying to start my Dell Inspiron 1525, but get the following blue screen message "STOP: c000021a {fatal system error} the initial session of the process or system process ended unexpectedly with status 0 x 000000001 (0xc0000034 0x0010038c).» The system was stopped.

  I tried to boot mode without fail & startup repair but nothing helps, always the message, any help would be really appreciated as all my College work is stored on the laptop.
  What about Otto
  Windows vista Home basic

  Hello

  Check with Dell Support, their online documentation, diagnosis and ask in the forums about known issues.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  =========

  STOP: 0XC000021A

  Can be a difficult problem to solve, and you indeed need a technical help in a real store of the computer
  (not the leeks and the glances at a BestBuy or other BigBox stores) or system manufacturer support.

  Cause

  This error occurs when a subsystem of mode user, such as WinLogon or the Client Server Run-Time Subsystem (CSRSS), irremediably compromised and security can not be guaranteed. In response, the operating system goes into kernel mode. Microsoft Windows cannot run without WinLogon or CSRSS. Therefore, it is one of the rare cases where the failure of a user mode service can stop the system.

  Incompatible system files can also cause this error. This can happen if you restored your hard disk from a backup. Some backup programs may skip restoring system files which they determine are in use.

  
  Solve the problem

  Run the kernel debugger is not useful in this situation because the error occurred in a user mode process.

  Resolve an error in the user-mode device driver or system, third-party application service: Because the bug 0xC000021A control occurs in a user mode process, the most common culprits are third-party applications. If the error occurred after the installation of the new or updated device driver or service system, third-party applications, the new software should be removed or disabled. Contact the manufacturer of the software on a possible update.

  If the error occurs during the system startup, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the Windows Advanced Options menu that results, select the last known good Configuration option. This option is most effective when a pilot or a service is added at a time. If the error is not resolved, try to manually remove the offending software. If the system partition is formatted with the (FAT) file allocation table, use a MS-DOS boot disk to access the hard disk of the computer. If the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or remove the defective software. If the defective software is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file. If a room newly installed if material is suspected, remove it to see if that fixes the problem.

  Try running the emergency recovery disk (ERD) and allow the system to repair any errors that it detects.

  Solve a problem of file system do not match: If you have recently restored your hard disk from a backup, check if there is an updated version of the backup/restore program available from the manufacturer. Make sure that the latest Windows Service Pack is installed.

  STOP: 0XC000021A<-- read="" this="">
  * 1314.html http://www.faultwire.com/solutions-fatal_error/Status-System-Process-terminated-0xC000021A-

  -----------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  It's my generic bluescreen convenience store - you can try Mode safe mode as suggested in article
  above - repeatedly press F8 that you start. Disks of Vista are probably necessary - if you do not have to try
  repair, you can borrow a friends because they are not protected against copying. You can also buy the physical
  discs of the machine system good cheap that you already own windows (you will need to reinstall
  If necessary). You can also repair disks on another computer.

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Apple music shuts down during the passage of the songs with Beats

  Well, then it is obviously a problem with iOS 9.2, because it has not fixed the beta 9.2, and it wasn't a problem with iOS 9.1. Last night, I upgraded my iPad and my iPhone iOS 9.2. I own a pair of Beats Studio Headphones Wireless. Every time I play a piece of music from Apple, and I want songs in the middle of a song, if I don't pause, the song plays for half a second, then shuts down and disconnects from my helmet. I also noticed this problem very rarely in the iOS 9.1, but it was only music app to another app with the sound, not just in changing songs. Please help me because it's very annoying to have to turn off my helmet and again between each song. Also, sometimes it glitches and getting a continuous noise on a song and I have to reboot my device. If there is a patch for that soon it would be much appreciated.

  I had the same problem. I plugged my Wireless Studio Beats and checked my firmware using Updater bat and found out there was a (2.1.8) update. After you have installed and (importantly) not matching and rematching the beats of my iPhone, Apple music was working normally again, and I was getting disconnected when changing tracks more. Hope this works for you also.

• I keep getting emails telling me that if I do not answer with my name, password, Date of birth and the country or territory my Windows Live will be Shut Down

  I keep getting emails telling me that if I do not answer with my name, password, Date of birth and the country or territory my Windows Live will be Shut Down.  The person who sends me emails is also with MSN.  Everyone knows this?  Thanks for your help.

  Thank you for visiting the Microsoft answers community.

  The question you have posted is bound using Windows Live (Messenger) and would be better suited in the Center to help Windows Live Messenger. Please visit this link to find a community that will provide the support you want.

• with MS XP, when I shut down the computer, try to download the same update again and again!

  and I don't know how to find the updated info?  Help!  It takes 5-10 minutes every time I have shut down the computer.  How to cancel this update which blocks my crt?

  Thank you!

  Julie

  Hi jjackbcop,

  Thanks for posting in the Microsoft Community.

  I understand that you are facing the issue with windows updates offer several times over and over again.

  Method 1:

  I suggest you perform the clean boot and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow these steps to configure Windows to use a Normal startup of the link report section to return the computer to a Normal startup mode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfig and click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal Startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2:

  I suggest you send the link and check (this also applies to windows XP).

  Windows Update or Microsoft Update repeatedly offers the same update

  https://support.Microsoft.com/kb/910339

• When shutting down my computer, Windows tries to close with force "Mediacontextnotificationwindow"... any idea on what it is and how to solve this problem?

  Original title: closed to stop forced mediacontextnotificationwindow

  I'm having a problem with a 'program'... ? When shutting down my computer, Windows tries to close with force "Mediacontextnotificationwindow"... any idea on what it is and how to solve this problem?

  Hello

  1. have you made changes on the computer before this problem?
  2. What is the exact message?

  Perform the clean boot may help you resolve this problem.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  a. click Startand then click run.
  b. type msconfigand click OK.

  The System Configuration Utility dialog box appears.

  c. click on the general tab, click Normal Startup - load all device drivers and services and then click OK.
  d. When you are prompted, click on restart to restart the computer.

• Stop: c000021a {fatal system error} the windows Logon Process system process ended unexpectedly with status 0 x 40000015 (0x00000000 0x00000000) the system has been shut down

  My husband must have some kind of bug in his computer as Kaspersky Internet Security, when he went on the internet, gave him a choice to block something that was causing a problem.  When he clicked "Block" - he got the BLUE SCREEN!  Is anyway for him to cancel it and save all her pictures on his computer?

  It has a Dell Dimension 8400 computer about six years.
  ----
  Sorry to bother you, but this time we did shut down his computer and restarted everything was fine.  Apparently he had clicked on something like 'do not allow' or however its formulation that I do not see.  So now we have to probably save photos and things out of his computer and take out the drive to reinstall Windows XP because there still be some sort of bug in there because we are getting popups saying some program are eager to enter the passwords section.  I don't know much about it but try to fix it!

  I looked into Kaspersky and ran a browser Configuration and analysis of the vulnerability in his computer and found that there was a kind of 'control popup' in Internet Explorer that had been added in the settings of the pop-up window. -I deleted who.

  I saw a setting in Kaspersky has been changed by default (they say "changed by the user, but did not change). -I have put all Kaspersky setting at default.

  So now, we hope the computer that my husband will work very well in the future because it's good now, even after rebooting.

  Now, we will have VERY serious about all of his photos on his backup external hard drive!

  If we have more problems with that, I'll be back but for now, everything is GOOD!

• c:000021 has unrecoverable system error. The system process window logon ended unexpectedly with a blocking ststus 0x00000000. The system has been shut down

  c:000021 has unrecoverable system error. The system process window logon ended unexpectedly with a blocking ststus 0x00000000. The system has been shut down

  Pls teach the procedure for resolution of the problems of this error message.

  Hi mac62sg,

  Remember to make changes to the computer before this problem?

  You can follow the steps mentioned in the article below

  How to solve an error "STOP 0xC000021A.

  http://support.Microsoft.com/kb/156669

  Important : this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.