A connect signal problem

Similar Questions

• Impossible to e mail my creations, I have a strong internet connection signal... problem?

  Impossible to e mail my creations... I get the message: no internet connection

  Hi AntoniaHampton

   

  1. what e-mail program is installed on the computer?

  2 are you able to access another Web page using the internet?

  
  You can check the links below and check out them if the steps to help you resolve the issue-
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

   

  I hope this helps.

• Duty slot in my sensor signal connection related problem class.

  I fanned simple class based on the NDK documentation found here - http://developer.blackberry.com/native/documentation/cascades/device_comm/sensors/

  But in my case signals do not plug on slots and returns always false. I was just wondering what I did wrong? Looks all logical.

  Here's the class:

  #include 
  #include "Sensors.h"
  
  Sensors::Sensors(QObject *parent) : QObject(parent) {
      // Create the compass sensor.
      m_CompassSensor = new QCompass(this);
      m_Accelerometer = new QAccelerometer(this);
  
      // Set the orientation mode to fixed so that sensor readings
      // aren't affected by device orientation.
      //m_CompassSensor->setAxesOrientationMode(QCompass::FixedOrientation);
  
      // If any Q_ASSERT statement(s) indicate that the slot failed
      // to connect to the signal, make sure you know exactly why this
      // has happened. This is not normal, and will cause your app
      // to stop working
      bool res = connect(m_Accelerometer,
                         SIGNAL(readingChanged()),
                         this,
                         SLOT(accelReadingChanged()));
  
      res = connect(m_CompassSensor,
                         SIGNAL(readingChanged()),
                         this,
                         SLOT(compassReadingChanged()));
      Q_ASSERT(res);
  
      // Since the variable is not used in the app, this is
      // added to avoid a compiler warning.
      Q_UNUSED(res);
  
      m_CompassSensor->start();
  }
  
  Sensors::~Sensors() {
      m_CompassSensor->stop();
  }
  
  void Sensors::compassReadingChanged()
  {
      QCompassReading *reading = m_CompassSensor->reading();
      qreal azimuth = reading->azimuth();
      qDebug() << "The azimuth is " << azimuth << " degrees.";
  }
  
  void Sensors::accelReadingChanged()
  {
      QAccelerometerReading *reading = m_Accelerometer->reading();
      qreal x = reading->x();
      qreal y = reading->y();
      qreal z = reading->z();
  
      // For debugging purposes
      qDebug() << "x acceleration: " << x;
      qDebug() << "y acceleration: " << y;
      qDebug() << "z acceleration: " << z;
  }
  

  Here is the header

  /*
   * Sensors.h
   *
   *  Created on: 2014-02-01
   *      Author: misha
   */
  
  #ifndef SENSORS_H_
  #define SENSORS_H_
  
  #include 
  #include 
  #include 
  #include 
  #include 
  
  using namespace QtMobility;
  
  class Sensors : public QObject{
  public:
      Sensors(QObject *parent = 0);
      virtual ~Sensors();
  
  private:
      QCompass *m_CompassSensor;
      QAccelerometer *m_Accelerometer;
  public slots:
      void compassReadingChanged();
      void accelReadingChanged();
  };
  
  #endif /* SENSORS_H_ */
  

  Please advise!  I was fighting with this for a few days already... I bet I missed something important but s mall

  Thank you

  Hello! Q_OBJECT macro is missing from the top of the class declaration:

  class Sensors : public QObject{  Q_OBJECT
  public:
    Sensors(QObject *parent = 0);
  

  p.s. This line changes, the first could not connect will not be detected. It should probably be & =

  res = connect(m_CompassSensor,
  

• Connection DAQ problems

  Hello

  What I want to do is quite simple (but I just can't understand ). I want to connect to an analog input to an analog output, but check this as a relay. For example, when the switch is true, my ankles are connected to the entrance on A pins passed through to the output on a PIN B. Then when the switch is set to false, the A input pins are not connected to pin B (or B axis would be output 0V).

  Problem: In the case when my switch is true, entry is passed correctly to the output. For the case when my switch is set to false, I get errors saying: "no sample provided to DAQmx don't Write initialize stamped generation." or "value required is not supported for this property value. The value of the property may be invalid because it is in conflict with another property. »

  I know that the problem is that the DAQ assistant wants some kind of entry at any time, but I'm not sure what to give him to do nothing exit.

  Attached are two attempts, I did.

  Any help would be appreciated!

  Thank you

  Nevermind, I figured it.

  Under the manipulation of the signal, I used a relay, which did not work before, but I had to change ' out when relay off "of the 'empty' to 'zero '.

• HP Photosmart Premium C309g-m connection cavity problem

  Hello

  I bought a HP Photosmart Premium C309g-m today and have successful connected to my Wireless N network.  My problem is that every time that I reboot the printer there connect lasts for about 30 seconds and then gets BOUNCING and then stops responding all together.  It is repeatable, and happens whenever I have restart the printer.  All other nodes on my network will continue to work perfectly, so I don't think it's my router that is at fault or one of my computers that I can reproduce this problem since.

  As you can guess it is really frustrating having a printer that works wirelessly for 30 seconds and then stops.  The printer itself shows a very good wireless signal all the time so I don't understand what the problem is.  Any help would be appreciated, because I rather like this printer and don't want to shop for something else.

  Brian

  The Linksys WRT600N is a wireless router simultaneous dual-band 802.11n.  There are a number of things to try:

  1. Please check that the width of the channel setting and 2.4 GHz band is fixed to 20 MHz only (you can still use the 5 GHz for customers of 40 MHz band).
  2. Make sure that you are not running in 802.11n mode only (it is not well defined by the IEEE 802.11n standard).
  3. If you're still having problems, open the printer's internal web page by accessing its IP address.  Select network, then wireless (802.11), and then advanced.  Scroll down to the bottom of the page and check the setting for in an infrastructure network use 802. 11 b / g behavior.  Press on apply.
   

• Connection speed problems - black WUSB54GC usb adapter

  Hello everyone,

  This is my first post here!

  I googled nothing helped, and so I thought I would record with the Linksys forum and see if maybe I can solve this problem that others may have as well.

  I recently installed black WUSB54GC usb wireless adapter on my desktop PC, windows XP (now updated with service packs, etc.)

  The adapter receives the complete signal (very good - excellent, 54 Mbps), but it seems that my download speeds are capped with this adapter. Web pages same way load more slowly. I can place the macbook from my girlfriend directly next to my office, connected to exactly the same wireless network, and its download speed, browser speed and speed test results are always twice as me (any site speed test I use or what file I download).

  When I do a speed test, almost seems as if the speedometer needles few want to continue, but they just 'bounce', as they are hitting some kind of ceiling.

  When downloading files, the macbook on average 500 to 800 Kbps, while the adapter WUSB54GC hangs out at approximately 90 kbps.

  I have read in this forum and have adjusted my router Linksys WRT54G wireless suggested as follows:

  -Set the channel 11-2 wireless, 462 GHz

  -Change the interval of tag to 75

  -Change the Fragmentation threshold to 2304

  -Change the RTS threshold to 2304

  In addition, my connection speed is even slower, regardless if I have the settings TCP/IP (under the Wi - Fi connection properties) set manual (static ip) or automatically.

  Any help would be greatly appreciated, as I would like to be able to get this thing working properly, knowing that my router is pumping a lot more than this adapter is letting me use.

  Thank you!

  Well, I think I solved the problem.

  Seems that in some ports USB on my motherboard (Asus P5B) do not allow to run at full speed wireless USB adapter. I had used in the rear ports on my computer... but the passage for the first ports (that came with the case - Thermaltake Armor) seems to have solved the problem. However, as I believe that all of the USB ports I have is strange Hi-speed USB 2.0 and strange that those outside that came with the case and will connect to the pins on the motherboard works better than those actually built. Huh.

  Wouldn't be something to do with the drivers for the WUSB54GC, or is this a problem with USB port drivers?

  In any case, I'm sorry if this sounds like a useless thread now, but maybe this someone solve other problems too.

  See you soon!

• HP Pavilion G6 - no WiFi Signal - problem "Broadcom 4313GN.

  Hello

  My laptop (HP Pavilion G6, PN: QG846EAR #ABU) with Windows 7 Home Edition is to have through its WiFi connectivity problems. The WiFi hardware is recognized as "Broadcom 4313GN 1 x 1 adapter Wi - Fi 802.11b/g/n" by the Manager of devices but it cannot detect all autour WiFi signals. I tried deactivating and activating it by FN - F12. This action works, but does not affect the situation. Initially it was the driver version 5.100.82.82 as of the 20.05.2011.

  I found two new updated driver from Broadcom and HP sites, but none worked. (ver: 5.100.82.95 - date: 1.4.09 and worm: 5.100.82.139 - date8.5.2012)

  I restored default Windows 7 Home but this does not work either.

  I started with Fedora and Knoppix live CD but none managed to see any signal, even if the two detected the correct WiFi hardware.

  I have checked and then changed the values in the BIOS by default, but this did not help.

  When a WiFi USB is plugged in, the PC works fine.

  Under the battery, the WiFi device is referred to as "bcm94313hmgb".

  Any idea?

  Say hello to new mscag.

  Thus, one of the sons is not connected?  It's probably the cause of your problem.  Take a look at your notebook PC Maintenance and Service Guide.  Specifically, look at page 54, which deals with the removal of the WLAN card.  He says that there should be two wires to disconnect (main and auxiliary antennas).

  I can't say very much in the picture, but it seems that you should be able to reconnect the loose wire.  I suggest this thread connected and if this does not resolve the issue I would then contact HP support.

  HP to support an appeal to the United States / Canada you can call to the 1-800-474-6836.  If you are in another part of the world, you visit HP's Support around the world to find the coordinates for your region.

  Let me know if plug this cable solves your problem.  Have a great rest of the day!

• Signal problem phone 10.3 callUpdated

  Hello

  I have a question that is hard for me to understand and even more difficult to explain so please bear with me!

  I am hoping to make an app callblocker for my mobile and I connect to the signal callUpdated phones and successfully receive updates in my onCallUpdate slot when a call comes in.

  My problem is that my onCallUpdate slot is triggered several times for an incoming call, the first couple of times call.phonenumber () is empty, I thought it was good that I could wait just to phonenumber () .length () is greater than 0 before doing something like endcall().

  The problem with waiting for the length of the phonenumber to > 0 and only do something when the phone number is > 0 is that I also want to detect private numbers but phoneNumber () .length () is 0 for private always numbers.

  Is there another way for me to do something in my onCallUpdated slot when the phonenumber() is available other than check the length of phonenumber() so then I can say if it is a private number?

  Hope someone can point me in the right direction with this.

  Thank you.

  looks like a lot of people to create the same application

  for incoming call fire several times because it has been updated the status of the call.

  the update has been
  callState - phone number
  UNKNOWN - no number 0
  UNKNOWN - no number 0
  1 INCOMING - no number
  INCOMING 1 - number
  INCOMING 1 - number

  You can analyze it from there

• BlackBerry Smartphones blackBerry 9360 Signal problem

  The problem started a few days ago a triangle stood next to my provider name. And since then, I have been unable to receive calls, to call, to receive sms and calls. Sometimes, the triangle disappears and I have some certain signals. So, what should I do? Thanks: d

  Hi andrei10d,

  Go to Options > networks and connections > Mobile network, the value so that the roaming power off. Click Save.

  It will be useful.

  Good luck!

• iOS 10 no signal problem

  I have an iPhone 5s (model 1533) and after the update to iOS 10 I can't get a signal, I tried a full restore and update and also reset network as well as the obvious reboot. First, he would get a signal a little while but if I tried to make a call, it would go directly to no signal, it also seems to have the power of the weak wifi signal too, related? Must say that I had a lot of problems with my apple stuff recently, at the end of my home! All ideas welcome please?

  I had the same problem on Verizon.  I fixed mine by going to settings, cell and disable roaming data and then on again.  Its happened twice so far, as well as a few other bugs.  iOS 10 is probably the worst launch of iOS.

• HP Pavilion Notebook - 17-f100: Internet connection, drivers problem

  Hello

  I have the HP Pavilion Notebook - 17-f100 (with bios, specifications: http://support.hp.com/hr-en/product/HP-Pavilion-17-f100-Notebook-PC-series/7234909/model/7492687/doc...) and after installing Windows7 have a problem to connect to internet, as well as to use/access to USB keys and using a mouse. Could you please help me to get more important drivers (unknown device, video controller, bus controller sm bus controller USB, PCI, ethernet, network controller controller device driver) and the most important for you to connect to the internet.

  Thanks in advance,

  Goran

  You are the very welcome.

  Here are the drivers wireless and bluetooth for this card template...

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827 & swItemId = ob_143747_1 & swEnvOid = 4058

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827 & swItemId = ob_142906_1 & swEnvOid = 4058

• Satellite P300 - re-connection Bluetooth problem

  Good day to you all,.

  I bought a laptop Toshiba P300 BB with WiFi and bluetooth Windows Vista certified.
  Everything works fine with only the exception of the connection between my mobile phone (Nokia 6300) and the program "Nokia PC Suite"
  When I put the PC in 'sleep' by closing the lid of the screen, the bluetooth with the phone stop connection (it seems to be ok)
  When the PC is wake up by opening the lid of the screen, it will start, but the bluetooth between the phone and the PC (Nokia suite) connection is not recognized. Even trying to do it manually.
  To reactivate this connection automatically, the computer must be stopped and restarted re - a.

  The PC power is set to power and battery on "never stop".
  The action of closing the cover of PC screen is set to 'sleep' (French intelligence)

  What is going on? and what needs to be done to fix this problem?
  All your 'lights' on this topic will be welcome
  Thanks a lot
  JCP

  Hello

  This question must be post at Nokia. They have designed this software and before software is released, it must be tested. I assume that they test it on several different laptops and desktop computers.

  So why this third party software doesn't work on Toshiba must be answered by Nokia.
  Computer laptop manufacturers don't offer support for this software and cannot be responsible for the feature.

  In any case, for me is not the big problem. It cannot be that difficult to turn off the connection before switching in standby mode, or maybe close to Nokia PC Suite. After waking up, start the software again and it should work properly.

• Satellite L450D-13U - connections WLan problems

  Hello

  I use talktalk as my internet provider.
  I started having an intermittent connection and the internet on the router light goes red. Its a d-link router.

  3 weeks a vist to a bt tech they now tell me that the problem might be my laptop.
  How could it when he connects and then removes the iradic same connection.

  Hello

  You said that the router disconnects Internet. Right?
  So how can have this cell phone number? Sorry, but I don t understand this

  In your case, I recommend to check the settings of the router.
  You should check the update of the firmware and should also check if other computers laptops/computers connected to the same router would have the same problems.

  If you are sure that your router is OK 100%, then you should check the notebooks of WLan.
  In such cases, it s advisable to update WLan driver

• Bluetooth network and Internet connection sharing problem

  I am putting in place a network via Bluetooth between two computers later with Toshiba Stack installed and to share the Internet connection with the second computer.

  On the computer of trees I put Internet connection sharing, and for this reason, it automatically assigns addresses TCP/IP for the Bluetooth Personal Area network (192.168.0.1).
  On computer 2, I put everything to get it automatically. Firewall (Kaspersky) disabled.

  When I connect 2 Bluetooth devices, everything looks fine, the 2nd automatically gets the IP address, I can ping both computers and Internet works also on the 2nd computer, for a few seconds! After that, it appears as the 2nd computer is disconnected from the network... what could be the problem?

  In the case of the observer under the System tab, I found information like these:
  2nd comp:
  The system has detected that the network \DEVICE\TCPIP_{E44D18EB-91F5-4 adapter has been connected to the network and launched a normal operation via the network card.

  The browser has forced an election on network \Device\NetBT_Tcpip_{E44D18EB-... because a master browser was stopped.

  and the 1st model also appears this:
  The system has detected that the network Bluetooth adapter... Area Network - Packet Scheduler Miniport has been disconnected from the network, and the network adapter configuration has been released. If the network adapter was not disconnected, this may indicate that it has malfunctioned. Please contact your vendor for updated drivers.

  In your case, I would look at the following Web site:
  http://APS.toshiba-tro.de/Bluetooth/redirect.php?page=pages/HOWTO.html
  It lists the following document:
  "Internet on PDA via PAN using Notepad as a gateway."
  In your case, the PDA is another laptop, but the procedure should be very similar.
  I would check the firewall settings later if it still does not work.

• SIGNAL PROBLEM

  I BOUGHT THE BIKE MAY 22 G. AFTER ONLY A WEEK, I ENCOUNTERED PROBLEMS OF SIGNAL IN MY DEVICE.IT WENT TO EMERGENCY CALLS ONLY MODE WITH A TRIANGLE GIVEN SIGN MORE RED ON THE INSIDE.

  I RESTARTED THE PHONE AND THEN AFTER 1 MINUTE SIGNAL CAME. AFTER THAT, ACCORDING TO THE SUGGESTION OF THE TECHNIQUE OF FLIPCART TEAM I HAVE RESET FACTORY DATA. THEN THE PROBLEM CAME ONCE FOR A FEW SECOND, BUT AFTER A DAY AND NOW UNTIL THE SECOND DAY HIS JOB VERY WELL.

  PLS SUGGEST WHAT TO DO IN THIS CASE.

  IS MY PHONE IMEI NO. - 355004054071637

  ID E-MAIL - [email protected]

  Closing thread now to comments reducing clutter