A copy of the capture of database (Capture.MDB) already exists.

Similar Questions

• A virtual machine or the template with the same name is already registered. Server error: the specified key name or identifier already exists.

  Hi all

  I have a 5.5 esxi server just the a virtual machine running at the moment. I try to clone this as shown below:

  http://nchrissos.WordPress.com/2013/04/22/cloning-a-VM-without-vCenter-in-ESXi-5-1-free-edition/

  However, I get the error:

  A virtual machine or the template with the same name is already registered. Server error: the specified key name or identifier already exists.

  I have no vcenter (yet), and it's just the 1 vm. The virtual machine is turned off. I get this error regardless of the name, I said that when I choose "add to the inventory.

  All advice appreciated.

  Thank you

  Oh dear...
  you read bad advice on the internet and then you get also the stupid advice here.

  Ignore both!

  If you want to clone a virtual machine by copying - do it like this:

  Create new virtual machine with the wizard.
  Skip creating a disk for new customers.

  In Datastorebrowser copy the original vmdk to the new dir, which has been created by the wizard.
  Reopen the new VM and edit - assign the vmdk that you just copied.

  The procedure of the blog is not supposed to work.
  Sissine trick doesn't make sense either

• "ERROR: the user name you have chosen already exists."

  When someone registers on my registration form (http://puremediccom.worldsecuresystems.com/puremedic-guru-register) with a user name that already exists, the form is sent, but in the notification of workwlow I see behing username "ERROR: the user name you have chosen already exists." When you try to connect to the site it does not indeed.

  Is the best way around this to request an address of email as a username? Or is it possible to run the validation on the existing user name?

  See you soon

  Jerun

  Hi Jerun,

  I think that the workaround in this case, so need email address to match the username is to use some JS.

  Please note the custom scripts is off of BC, but here is an example that may help.

  http://KB.worldsecuresystems.com/598/bc_598.html#main_Set_the_value_of_the_username_field _ equal_to_the_email_address_field

  Kind regards

  -Sidney

• Can not see files after you have saved a copy but when save twice tells me file already exist

  I saved some files to my documents and my office. However, after the closing of the record I don't see, to no, them / it on the destop or in my documents. Then, I opened the file and saved an additional time and asked at the outset that "the file exists you want to overwrite? Why can't I view the files?

  You will find when you tell windows to show you its hidden and system files: http://goo.gl/ejb7P

• You want to buy a copy of the upgrade to windows 7.

  You want to upgrade my windows XP computer to windows 7.

  I found the link that I can buy.

  Question: this outfit sells copy of the upgrade to windows 7? (Don't want to get cheated and lose my money.)

  http://www.softdirectworld.com/Microsoft-Windows-7-Home-Premium-1-PC-license-32-64bit/

  Thank you very much for your help.

  I don't think not that it's likely that you will get a definitive answer, but here are a few things to think about.

  Microsoft has stopped the sale at retail of Windows 7 on October 31, 2013.  Which does not prevent a retailer to sell copies of Windows 7 that were acquired from Microsoft before that date.  Microsoft is continuing to sell Windows 7 to run the OEM for pre-installation on their computers.  See http://windows.microsoft.com/en-us/windows/lifecycle

  It is not at all what you will get for your $55.  You can just get a license key (which, according to the FAQ on several occasions either real, authentic, etc..).  "How to install" page on this site refers to downloading a file ISO "from the Microsoft store."  She said, however, that you can 'use the ISO file downloaded from us'.  Then maybe you'll get a link to download an ISO of softdirectworld... and perhaps that you won't.  Microsoft Windows 7 ISO official files are available to Digital River... but they have in the past disappeared for a while.  As of today, the links are active.  See http://www.heidoc.net/joomla/technology-science/microsoft/14-windows-7-direct-download-links

  More troubling is the response of the FAQ that says:

  Q: why are the keys so little expensive compared to buying in a retail or online store?

  A: purchase us volume keys and pass the savings to our customers. In a retail store, you buy a copy of the software and packaging that you already own.

  It is not at all clear what "volume keys" which talks about response.  Microsoft has indeed a volume license program, but as far as I KNOW, it is not intended to be used for retail sales.  Microsoft says (emphasis added):

  In simple terms, software volume licensing makes it easier and more affordable to run the software on multiple computers in an organization.

  My guess - and I stress that it is just a guess - is that you get access to download a ISO legitimate Windows 7 with a genuine authentic Microsoft volume license key.  This would be valid and allow activation and updates... until Microsoft decides that selling VLK as this constitutes a violation of the volume license key and blacklists the or the key.  Happens soon, later or never.

  Trying to decide what to do, don't forget that there are essentially no more commercial versions of Windows 7 for sale.  Versions that you see on websites like Amazon are mostly versions of "OEM System Builder", which Microsoft says can not be used for its own computer (a "system builder" has sell systems he built).

• Is there a way to copy the capture from one photo to another time?

  I recently re-scanning of pictures that were original scanned a few years ago. Giving them the same name as the previous scanned (only with a _1 at the end), I import the newly scanned photo in the same folder (which is how to organize my photos), to be able to compare and then copy the metadata from the initial analysis to the latter. As I did not yet all signs or notation, most metadata will contain only keywords. But stored under "Metadata" in the view library, 'Capture time' is also stored, but I can't in any case among the options "copy of the metadata. Is there something that I missed, or is there a work-around somewhere?

  Thanks in advance-

  OLE K

  Hi Ole,

  You cannot copy, but edit:

  In the menu goto of the metadata module library - change the Capture time.

  If you have multiple images selected when you choose this command, you set the active image to what you enter as 'date and time specified' and others will be adjusted by the same increment. Decrement in your case, as I suppose.

  So if you want it to be exactly identical to that of the old scan, you must do it one by one for each new analysis.

  Cornelia

• I have a problem with the capture tool works not properly on Windows 8.

  Can I change to automatically let me start to select without clicking on New?

  Original title: snipping tool - work when I start it up, the new button has already been clicked but not at home

  Clarification:

  At work, my computer is Windows 7. At home, it is Windows 8. At work when I start the capture tool I have not hit any other button in order to start the selection of the area I want to Snip. The tool is already gray and my mouse is ready to score my selection.

  At home when I start the capture tool, I get the menu, click on 'New' and THEN I can start my selection - one additional click. It annoys me (I know it's small, but I cut a lot) so I was hoping there was a setting I could change how it starts.

  I know that's not exactly a new topic, but I found that I had the same problem.  I found that the cause of this problem actually comes from OneNote believe it or not.  If you have recently updated your Office Suite and now have the ability of OneNote, all you have to do is to open OneNote and configure.  Once you get it configured you can then select the options that you just press the Windows key + S to be able to cut out a screen shot and you can also set it to copy directly to the Clipboard, then there is no need to tap the new button more in the cutting tool.  Hope this makes sense and helps anyone having the same problems I had.

• Using the Capture function with a Capture card

  I was wondering why I can't be the first to admit my capture card when I try to use the capture feature.

  Ah, so you're out of luck. First only capture via firewire.

  If your device has usb and then copy the contents of memory or hard disk, and then import in first.

• Which cameras are compatible with the capture feature in adobe first pro?

  My son made videos of stop motion and wants to be able to use the capture feature on adobe first pro where you connect your camera via USB and can capture images on your computer through your camera. I am looking to buy him a camera and trying to find a list of digital cameras are compatible with this feature, it now has a small camera fuji who will not let him do.

  What other users have said is correct. First capture via FireWire or SDI/HDMI through a solution of part 3.

  For your situation, I would say the better is to connect the device to your computer via USB or use a card reader and copy the directory on your hard drive and interfere in first via media browser.

  If you Google "how to do stop motion in first pro" there are tons of tutorials.

  Best,

  Peter Garaway

  Adobe

  Premiere Pro

• IDCS5 JS: problem with the "captured" text lose formatting

  Hi all

  Excellent script from Peter Kahrel allows us to convert the notes in endnotes dynamic in IDCS5 after which, we use some of our own JS to enter this text, put it in an orange box and then delete the original text of notes. This works very well but have just realized that the formatting (italics) who was in the original notes text does not survive moved to the new text box. Italics is still protected by a character style.

  Our code;

  //searches for endnotes, puts them in a orange box and adds the "Endnotes" heading
  app.findGrepPreferences = null;
  app.changeGrepPreferences = null;
  app.findChangeGrepOptions.includeFootnotes = true;
  
  var myDoc = app.activeDocument
  var myPara = myDoc.paragraphStyles.item ("Endnotes");
  
  // Find the text & capture its contents to a variable
  app.findGrepPreferences.appliedParagraphStyle = "Endnotes"
  origText1 = app.activeDocument.findGrep (); 
  
  //check if any Endnotes are found, nothing happens if not
  if(origText1.length!=0)
  {
  newText1=origText1[0].contents;
  
  //adds new text frame on 1st page of doc
  var myTextFrame1 = myDoc.pages.item(0).textFrames.add();
  myTextFrame1.geometricBounds = ["6p", "6p", "36p", "36p"];
  
  // Apply the objectStyle to frame
  var myOStyle = myDoc.objectStyles.item("Endnote box");
  myTextFrame1.applyObjectStyle(myOStyle); 
  
  //add captured text to text box
  myTextFrame1.contents = ("Endnotes\r" + newText1);
  
  var myDelete = myDoc.paragraphStyles.add ({name: "Endnotes1", basedOn: myPara});
  
  // Loop to apply paragraph style to text
  var length = myTextFrame1.paragraphs.length
  
  for (var i =0; i<=length-1; i++ )
  {
  //apply para style to new frame contents
  var myStory = myTextFrame1.paragraphs[0].parentStory
  myStory.paragraphs[i].appliedParagraphStyle = "Endnotes1"
  }
  
  //removes original text
  app.findGrepPreferences.appliedParagraphStyle = "Endnotes"
  app.changeGrepPreferences.changeTo="";
  app.documents.item(0).changeGrep();
  
   // remove Endnotes1 paragraph style and replace with Endnotes style
  myDelete.remove (myPara)
  }
      
  else
  {
   }
  

  As you can see enter us the text to a variable using GREP and that place in a new box (preceded by a heading). Make us a copy of the para style 'notes', which allows you to style the copied text, remove any style with the original style (the original formulation) and then delete the new style replacing wiith the original style so that the copied text back to style 'notes' new para. I don't know there's a better way, but it works for what we want - at least I thought that this was the case.

  Any thoughts appreciated gratefully. I searched the forum but couldn't find anything relevant. What Miss me?

  Thank you

  Iain

  Why don't you just "move" the texts found for the box of endNote?

  I suggest the following approach (not tested, project code):

  function moveEndnotesInBox()
  //--------------------------------------
  // Searches for endnotes, puts them in a orange box and adds the "Endnotes" heading
  {
      // Preset findGrep
      // ---
      app.findGrepPreferences = null;
      app.findChangeGrepOptions.includeFootnotes = true;
      app.findGrepPreferences.appliedParagraphStyle = "Endnotes";
  
      // Find the text(s)
      // ---
      var doc = app.activeDocument,
          foundTexts = doc.findGrep(),
          i = foundTexts.length;
  
      // If no 'Endnotes' text is found, return
      // ---
      if( !i ){ alert("No endnote found"); return; }
  
      // Creates a new text frame on 1st page w/ specific
      // bounds, and preset contents
      // ---
      var tf = doc.pages[0].textFrames.add(
          {
          geometricBounds: ['6p', '6p', '36p', '36p'],
          contents: "Endnotes\r"
          });
  
      // Preset obj and parag. style
      // ---
      tf.appliedObjectStyle = doc.objectStyles.itemByName("Endnote box");
      tf.parentStory.paragraphs.everyItem().appliedParagraphStyle = "Endnotes";
  
      // Backup the last insertion point index
      // ---
      var    ips = tf.parentStory.insertionPoints,
          ipx = ips.length - 1;
  
      // Loop through foundTexts and move texts to tf
      // (IMPORTANT: from the last to the first item to preserve Text indices)
      // ---
      while( i-- )
          {
          foundTexts[i].move(LocationOptions.AFTER, ips[ipx]);
          }
  }
  
  moveEndnotesInBox();
  

  Of course you must still deal with the possible lack of returns of paragraph or 'ghost' reference markers. I do not exactly know the context, but it seems not complicated.

  Hope that helps.

  @+

  Marc

• Help with settings in the capture of a 1968 for the Production of DVD movie

  I have a problem with the Premier Pro and need help.

  I'm on a date limit to change a feature film (01:27 long). It's a job home with, unfortunately, not a lot of knowledge on Premiere Pro. It must be sent in MPEG2-DVD (which I don't know how to do). My problem in the import of DV cassettes. I know how capture of the Sharp VL - AX1 I use to read the tapes. He appeared in Premiere Pro, etc.
  
  My problem is with the settings. I set up the Premiere Pro with Standard DV NTSC 48 kHz, and then click capture. While the small screen on the Sharp VL - AX1 shows scenes with just a small black band (1/2 inch?) on the top and the bottom of the actual scene, the import/capture on the PC screen appears on a screen wide once he starts the capture and everything is elongated horizontally. I tried variations for the last month, but I'm stuck right here. The film was shot in 1968 and is wider; wide screen just not. When I try the implementation of big screen, the capture on the PC screen is just as broad if not broader.

  
  

  The film has been digitized from the original 35mm copy by a professional company in Texas. I'm just trying to correct some color problems and send it to them for the production of DVD. They use Avid, so they cannot make the same color of correction, etc., work I want to do.

  I would like to import from DV tapes in the best possible quality, tweak it a bit and then export it to a (probably mpeg2-DVD) format, which they can use to make the additional editing (DVD menus, etc.) for the production.

  
  

  Here is a picture of what appears on the screen of the Sharp VL - AX1

  
  

  

  
  

  Here is a picture of what appears on the screen Capture in Premiere Pro (CS5)

  
  

  

  
  For any help or suggestion will be appreciated. I have this project done Friday.

  
  

  George

  The telecine like a 4:3 letterbox wasdone: that's why you see black bars in the capture window. However, the transfer to the band (or perhaps the capture of original sequences by the transfer device) has reported that 16:9; First recognizes that flag, and that is why the video is stretched in the capture window. Since it's DV, it is not really important. Just capture it as - is and then right click on the AVI file captured, select Modify > interpret footage and all the pixels to Conform to D1/DV NTSC format (. 9091). He will perform the 4:3 images, and the aspect ratio is correct. There will be bars from mailbox to mailbox, but those who are already in the images. You can get rid of them, but you'd have to blow up the images and lose resolution, then I'd say just leave as is.

  Once you have done so, just drop it into a sequence of NTSC DV (not widescreen) and change there. From there, you can export some way that you see fit. MPEG-2 DVD is fine as long as the other company is just doing the DVD authoring, but if they do no editing more far, you probably want to just export to tape to maintain the highest quality.

• How to use the capture and the print button

  I tried to figure out how to use the capture and the "print" button, or add or what you call. I press it and the whole page of a different color changes, so I try to cut the section I want but I don't know how to send it to the printer. Can someone help me with this. I'm not at savvy with tech stuff, but when I find a recipe or something and it doesn't have an option to print a certain area, I can't understand how to use it?

  Thank you

  Andi Starbuck

  That happens to me is, I click and drag to make a rectangle of yellow selection, and as soon as I raise my finger on the mouse button, the part I've selected is captured as an image, a new tab opens and preview before printing, the image display. I can use the installation of the Page or simply print. But if I close the preview, this temporary image vanishes and I'm back on the page where I started. You see something different?

• Error in the capture of several channels using pre-trigger

  I have problems of acquiring data with pre-trigger samples during the capture of several channels, using hardware NOR-PXI-6071E and Analog Input VIs in Labview (inheritance OR-DAQ).

  My goal is to trigger a signal, while capturing another. Unfortunately, I can't use the PFI0 for external triggering, as our cables/material have already been built, so I have to use an analog input as the trigger channel. I understand that to do this I must capture the two strings and the string I want to trigger outside must be the first string in the list.

  If I trigger and capture on the same channel (I tried 1-4) then it works very well, regardless of the number of samples before relaxation together. If I capture more than one channel (the channel of the relaxation to a first), with no pre-trigger samples, then trigger and capture both work very well. However, if I do the same thing with pre-trigger > 0 sample I get the following error:

  Error-10621 to AI control. Possible reasons:
  NOR-DAQ LV: The specified trigger signal cannot be assigned to the resource for the trigger.

  I don't have to such limitation explained in the user manual, and the forum search, I found a few other people who have had the same problem but they had no solutions. Any ideas?

  Hi Jackson,

  Unfortunately, this is a hardware limitation when you reference analog trigger via one of the lines to HAVE.

  Please see this knowledge base. Particularly the second paragraph says

  The error-10621 appears immediately when the VI running if you try to assign scans of relaxation before while scanning multiple channels and using one of the entries as your trigger channel.

  Details are explained in the third paragraph:

  Because all the entries are multiplexed before being sent for analog triggering circuit, it is possible that the trigger on the trigger channel conditions might miss while the device is multiplexing by another channel. In this case, the trigger will not be detected.

  It is explained in the E-Series user manual page 10-3.  Specifically the second paragraph of the section entitled "Analog Input Channel".

  Eric S.

• I use the capture tool. How dp I get rid of the white background in the photo already chiseled the part I. I just want the part chiseled with no experience at all? Any help, thanks

  I use the capture tool.   How dp I get rid of the white background in the photo already chiseled the part I. I just want the part chiseled with no experience at all?   Any help, thanks

  Although it seems to be a white border when you first fill the snip, after saving it shouldn't be present more.

  If the border remains you can remove by using the crop tool on a photo editing programs such as integrated Windows Paint program.

• Compellent snapshot for the passive copy of the database Exchange 2010

  Hi all

  I have the following Setup: A DAG with 3 Exchange 2010 mailbox servers, two of them are in the main data center and have the databases and the logs on the local storage. However, the third server is on a Data Center remote for disaster recovery and data bases, and newspapers is the Compellent storage. Of course, because it's my disaster recovery site, the database is a passive copy. However, the Replay 7.1.1.1 Manager Explorer is unable to see data in the section "Exchange shops". But if I turn the databases on this server, and then Replay Manager is able to see. My question is, how can I create snapshots of the passive copy of the database from my Exchange 2010 Server?

  Thank you!

  I confirmed that Replay Manager cannot do that; the reason? Dag have a database and are essentially sending for updating the passive copies of newspapers. Since they are not online and synchronizes the DAG status between servers backup will always attempt to occur on the asset. If only one of your copies of DAG is on an HDS, it will be a more serious problem.

  There is no restriction not to take a replay on passive volume all - except the same caveat that it will be not a quiece at the level of the BONE and being written in the log transactions is not valid. Unlike earlier versions of Exchange IS simply reject these that he committed the paper to the data store (if you try to mount the reading disaster).