Defragmenter

Similar Questions

• QUESTION ABOUT DISK DEFRAGMENTATION

  My computer must be turned on when I do the program "Disk Defragmentation? It is planned to make the service on some time each month, however, I don't always have the computer at this time.

  To do a disk defrag, your computer must be on a Buddha (not on standby).

  If you have scheduled a moment when the computer is not on the value, it will not turn on your computer to do either.

  Some computers have a program that you can use to set a date and once your computer turns on automatically. In most cases, this parameter can be set in a menu before loading the Windows operating system.

  NOTE: Not all computers are built with this feature.

• Tecra M1 too slow defragmentation

  Hello:

  Systematically all the next five weeks are performed:
  1 / disk cleanup
  2 / Defragentation
  3 / McAfee Virus Scan (automatically updated)
  4 / spy Bot system

  ZoneLabs Pro and McAfee conveniently grouped on the Tecra M1 and other machines here.

  Defragmentation takes 5 hours in a row. What is interesting also sometimes after parsing, it indicates that defragmentation is NOT necessary. However, it is always selected to Defrag.

  Why it always take so long, when the other machines, for operation as well as the Tecra M1, carry out and complete operations before lunch, while I am struggling to make for dinner?

  All informed assistance would be oh so much appreciated.

  TIA.

  Martin

  Hello

  In my opinion if the anti-virus or spyware software runs in the background that could be a reason for the long time of defragmentation. I propose to disable all automatic monitoring during the procedure of defragmentation software.

  Good bye

• Disk Defragmenter

  I found this Defragmenter-Auslogics - it's much faster than windows but noticed a few cases, the results do not coincide (said windows defrag - Autologics a need)

  Scan disk first.

• When I want to start Disk Defragmenter, I get a window that says "Disk Defragmenter uses currently.

  I own a HP Pavilion P6000, model #p7610t. I'm using Windows 7 OS. When I want to start Disk Defragmenter, I get a window with the following message: Disk Defragmenter is currently using customized settings created by another program. There is a button with a blue and Gold Shield that says: 'delete settings '. How can I identify this other program? Should I forget about it and remove the settings?

  Bob, I, personally, would eliminate the settings to see if that helps.  When you do this it can give you a clue to the other program involved.  The worst that can happen is that you need to reinstall the other program.

  If your problem is solved, please click "accept as a Solution.

• Hybrid disk defragmentation

  Hello

  I recently installed a Seagate hybrid SSHD drive on my IdeaPad Z570 and has learned that it is not good to defragment, usually as you lose SS cache and it causes wear. However, I also read that it is correct to do so if you turn off your NV Cache. But my computer had no function of gpedit, so I found a download which allow me to access it and went to the system and models of administration, but found no disk NV Cache and Smart Defrag analysis tells me that my drive is defragmented 4.4%, I wish I could defragment it.

  Does anyone have experience or knowledge on that to help advise, as I am just a user of basic computer just learn by internet trawling.

  Thank you.

  LenBlazer thanks for the reply.

  I understood now using Smart Defrag which, under my program from Iobit ASC, does not hide if accumulate on the part of the SSD drive that recently, I gritted my teeth and tried when I analyzed the disc and it is more than 6% defragemented. As long as I choose only Smart Defrag and optimizes not and do not use disk CSA optimize or automatic defragmentation, it's which were dismantled the storage of the cache. So if someone has the same quandry with a hybrid drive of my experience do not use disable Windows Defrag and use Smart Defrag but do not use anything that optimizes the drive because that's what the cache SSD and you lose the cache and a bit of time so he can build up again.

• Create a progress bar of defragmentation PDM

  I'm saving up large amounts of data (32 analog channels 5 usb votlage Renault all plugged into the same computer). Samples of continues to 100Samples per second for 1 hour or more. The PDM save the file is huge at the end of the program so when I hit stop the whole thing hangs then that labview executes the final block of defragmentation DDHN. I don't necessarily mind it, but it would give me so much peace of mind if I had some sort of defrag in progress progress bar that pops up when this happened. Is there a way to do this? How can I find the current state of the VI and that thread to an indicator of progress bar?

  In fact, I think that I just, if I replace the path and error of the son with shift registers, it passes the correct path to the beginning of the loop again! is that correct?

• Defragmentation system problem

  Separated from this thread.

  These answers do not help somehow. What is the 'system' & why must he be defragmented if my readers are 0% fragmented?

  I click on defrag for system & nothing happens except that I thought that my system is 8% fragmented. Why?

  Quite honestly I would ignore it, but if you do not want to push a little further you can.  If you open disk management (just type "disk" in your Start menu/screen to find), you should see this drive system (which can be a real player, or just more likely partition).

  From here you can right click and assign a drive letter for a minute so you can explore the disc. Remove the drive letter when you are finished.

  But if that's what I think it is, these volumes being fragmented is usually because they gave no movable system on them, so they will always show as fragmented and since they are read-only will not same the defragmentation process.  It won't slow down your system, however, I am sure of that because he has not assigned a letter, it's guaranteed essentially it is not used for daily operations.

• You can put your computer to sleep while the defragmentation process is running?

  Continue the process of defragmentation even if the computer is set to mode 'sleep'?

  Nothing happens when the PC goes to "sleep".

  -steve

• During defragmentation receive the message "There is a"VALORISATION"fragmented 1%"

  During defragmentation - there is a "VALORISATION" fragmented to 1%. How can I resolve this issue. Can I have an answer on "* address email is removed from the privacy *." -Thanks for your reply.

  B.Michel Duffy

  * removed *.

  * original title - during the defragmentation - there is a "VALUATION" fragmented to 1%. How can I resolve this issue. Can I have an answer on "* address email is removed from the privacy *." -Thanks for your answer.*

  Hello

  ·         When you get this error message?

  I suggest try to Defrag in safe mode, follow these:

  a. restart your computer if it is running.

  b. press the F8 key after your computer powers initially.

  c. Once you see the menu Options Advanced, boot you can stop tapping.

  d. use the up/down arrow keys to highlight your selection.

  e. select Safe Mode and press ENTER.

  f. you should see loading drivers and wait please.

  g. you should then be at the Welcome screen.

  h. connect to your computer using an account with administrator privileges.

  I hope this helps.

• How can I find defragmentation

  Impossible to find in order to run the defragmentation

  Defragment your Windows 7 computer:
  http://Windows.Microsoft.com/en-us/Windows7/improve-performance-by-defragmenting-your-hard-disk

  Vista Defrag:

  http://Windows.Microsoft.com/en-us/Windows-Vista/improve-performance-by-defragmenting-your-hard-disk

  How to defragment your disk Volumes in Windows XP:

  http://support.Microsoft.com/kb/314848

• My Disk Defragmenter Hangs After startup

  My Disk Defragmenter Hangs After startup.  I tried to use the microsoft fix it Center automatic troobleshooter for the maintenance of the system determine the cause and got an error code 0 x 80040154.  He only "worked" on windows update and the update to fix issue still exists.  I'm trying to find out what means error 0 x 80040154 and how to solve the problem.

  Hope that gives you enough information.

  Hello

  (1) operating system do you work?

  (2) which Fix - it applied?

  (3) what is the exact full error message?

  Try the following methods and check the status of the issue.

  Method 1:

  Run a scan of the file system checker and check if it helps.

  http://support.Microsoft.com/kb/929833

  Method 2:

  Check a drive for errors.

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  NOTE: This task might cause loss of data on your computer. It is recommended that you back up all data and files before performing this.

• What happens if Disk Defragmenter is stuck on the 2 relocated pass

  What happens if Disk Defragmenter is stuck on 2-69% pass moved?

  Hello

  ·         What operating system do you use?

  Method 1:

  I suggest that you can run the disk check and check if you can perform disk défragmenterez.

  Check a drive for errors

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Method 2:

  Try disk clean and check if it helps:

  Delete files using disk cleanup

  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

  Method 3:

  If the problem persists I suggest you to put your system to boot and check if it works:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• How can I get the Disk Defragmenter to work?

  Disk Defragmenter won't start for defragmentation, what I do?

  Hello

  You should ask this question in the answers – Windows Forums for your version of Windows.

  Answers - Windows Forums
  http://answers.Microsoft.com/en-us/Windows

  --------------------------------------

  Defrag problems are often related to the corruption of disk.

  Inside the Windows - Regular or Safe Mode (repeatedly press F8 as you start).

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  GOLD:

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ----------------------------------------------------

  For even better and more efficient to check:

  At the Recovery Console prompt (if you have one) or from a Windows 7
  disc - if you do not have a Windows 7 disc you can borrow a friend (it must be the same 32
  or 64-bit, and they are not protected against copying) or make a. Also your system manufacturer will sell the
  physical disks cheap since you already own windows.

  Chkdsk /f /r

  RESET

  After k and before space / f and before.

  sfc/scannow

  RESET

  Space after c and before.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  ----------------------------------------------------------------

  If CheckDisk is unable to fill as above:

  If ChkDsk does not start in Windows 7 or Vista
  http://www.WinVistaClub.com/T50.html

  How to difficulty Chkdsk will not run at startup in Vista (Windows 7 is the same)
  http://www.Vistax64.com/tutorials/130824-CHKDSK-will-not-run-startup-Vista.html

  ------------------------------------------------------------------

  If you do not have a Windows 7 disc, you can borrow a friends because they are not a copy
  protected. The manufacturer of your system will also sell the physical DVD cheap since you already
  Clean Windows. You can also do an ERD on another computer.

  If you need to repair disks - these help repair Windows not re-install.

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  =====================================

  If there are still problems of disc:

  Manufacturer diagnostic utilities - run one to your hard drive
  http://www.techsupportforum.com/hardware-support/hard-drive-support/302602-hard-drive-diagnostic-utilities.html

  Corrected list dated 06/09/2010

  Fujitsu hard drives: utility of diagnosis here
  http://www.Fujitsu.com/EMEA/products/HDD/

  Hitachi hard drives: utility of diagnosis here
  http://www.HitachiGST.com/support/downloads/

  IBM hard drives: use Hitachi utility *.

  Toshiba hard drives: use Hitachi or Maxtor utilities

  Maxtor hard drives: Diagnostic Utilities here (now SeaGate)
  http://www.Seagate.com/www/en-us/support/

  Quantum hard drives: use the Maxtor utilities

  Seagate hard drives: here Diagnostic utilities
  http://www.Seagate.com/www/en-us/support/downloads

  Conner hard drives: use the Seagate utilities

  Hard drives Samsung: utility of diagnosis here
  http://www.Samsung.com/global/business/HDD/

  Hard drives Western Digital: utility of diagnosis here
  http://support.wdc.com/product/download.asp?lang=en

  Trial versions of one of these 'might' help.

  SpeedFan
  http://www.almico.com/sfdownload.php

  HD Tune
  http://www.hdtune.com/

  ===========================================

  New settings command-line command for Defrag.exe in Windows 7
  http://www.Winhelponline.com/blog/new-defrag-cmd-line-parameters-Windows-7/

  Defrag options in Windows 7
  http://www.thewindowsclub.com/defrag-options-in-Windows-7

  Defragmentation of the command-line for more control
  http://TechNet.Microsoft.com/en-us/magazine/ff458356.aspx

  ===========================================

  Here are excellent free 3rd defragmenters party which I use.

  Auslogics Disk Defrag - FREE - works easily and does a great job
  http://www.Auslogics.com/en/software/disk-defrag

  Very powerful - FREE - MyDefrag
  http://www.MyDefrag.com/

  Defraggler - free - defragment your entire hard drive or individual files - unique in the industry.
  This compact and portable Windows application supports NTFS and FAT32 file systems.
  http://www.Piriform.com/Defraggler

  Also check this and other "related links" here:

  How to use Windows 7 Disk Defragmenter
  http://www.SevenForums.com/tutorials/11733-Disk-Defragmenter-open-use.html

  How to enable or disable the Windows 7 Disk Defragmenter schedule
  http://www.SevenForums.com/tutorials/3292-Disk-Defragmenter-schedule-turn-off.html

  I hope this helps.

• monitoring the progress of disk defragmentation

  Is there a chart/graph of the current progress of disk defragmentation?  If so, how do you access?

  Hello

  Unfortunately there is no GUI when you use the Defragmenter supplied with windows Vista.

  An alternative that is very popular is the free version of Auslogics Disk Defrag available on the following link.

  http://download.CNET.com/Auslogics-Disk-Defrag/3000-2094_4-10567503.HTML?part=DL-6267754&Subj=DL&tag=button

  When you first run the software above, will give you the possibility of partition (s) you want to defragment - as with any 3rd party defrag utility, only the C Partition must be selected.

  Kind regards

  DP - K

• Error 1068: Task Scheduler cannot start, impossible defragmentation

  I tried to defrag my sister's computer and ran into a problem.  Defragmentation wouldn't because Task Scheduler would not start.  Long story short: operating system Windows 7.  My attempts to solve the problem, there are messages that I continued to receive:

  "Windows would not start the Scheduler Service on the Local computer.

  and

  "ERROR 1068: the dependency service or group could start."

  Please, I need help.  Any ideas?  Do you need more information?

  Thank you in advance,

  Laura

  Hi Laura,

  Open windows control panel, open administrative tools, and then open Services.  First check both of these services.

  Remote procedure (RPC) call  This service should show started and startup type must be automatic.

  Windows event log                    This service should show started and startup type must be automatic.

  If you need to change the settings of the two services above, right-click on the service and select Properties.  Select Automatic from the drop-down list and click on apply.  Once finished, click on the Start button to see if the service starts successfully.

  
  

  Task Scheduler                            This service should show started and startup type must be automatic.

  If you have made changes, see if the disk defragmentation utility will now work.

  Let me know if this does not help the issue.

  Kind regards

  DP - K