A film can detect the what level it's on?
Hi all:I have a series of movie.swfs which are repeatedly in a loop in at different levels and I'm running into trouble their debugging and monitoring what is happening. Is it possible that I can implement a trace with a command that will spit out the number for the level on which there are currently? For example a loop through can run the clip at the 400 level, while the next time through she come to floor 500. And let me know in my tracks at what level it is on when he gives me some variables.
Thank you in advance,
Garrett
To determine at what level you are on, just use:
trace (this);
as the conversion of a movieclip chain will give an absolute path beginning with _leveln. ___
Or, if you want just the number:
trace (String (this). Split('.') ([0] .slice (6));
Tags: Adobe Animate
Similar Questions
-
installation stops with a "cannot detect the last level cache.
ESXi 5.0 installation process stops with a message "cannot detect the last level cache.
VMware ESXi 5.0.0 [Releasebuild-469512 x86_64]
Cannot detect the last level cache
CR0 = 80010039 cr2 = 0 x 0 = 0x3e7000 cr4 = 0 x 2038 cr3
PCPU0:2048 / bootstrap
PCPU 0: S
Beginning of the code: uptime VMK 0 x 418013200000: 0:00:00:00.890
6 lines of < no symbol > errors
Basic FS = 0 x 0 gs = 0 x 418040000000 kg = 0 x 0
No space on disk for the dump data.
Debugger waiting...switching LSI based SAS controller to port sata3 onboard has not changed a thing
Oh, here the specifications:
Processor Intel i5 2500
16 GB OF RAM
ASUS P8H67-M Boardany ideas?
Hi all
I had the same problem after turning on in BIOS "Max CPUID Value Limit" to activate option.
Disabling above option help me to install vmware esxi 5.0
Anatoliy
-
WIFI on my C850 Satellite can detect the network but will not connect
I just bought a satellite C850 - PSKCCA-02D00M
The connection to the LAN works fine however the Realtek RTL8723AE without wireless/Bluetooth will not connect to the network. It can can detect them just does not connect. I used the troubleshooting, and he cannot sort.
All other devices connect very well as Iphones and Kindle
In the config is doctor says that the adapter is enabled in a domain and in the adapter another status is down.
I took back to the initial power and installing and unistalling and reinstalling the adapter using the driver on the website.
Any help is welcome. I don't want to have to take back just for this issue
See you soon
Your WLAN is locked? Can you connect WIFI if you delete the WIFI password for two minutes?
Have you tried to reboot your router? -
Windows 7 system can detect the mouse click event
Hi, I have a user with a fresh install/update of Windows 7 64-bit. For some strange reason, it continually records clics.2 seconds in duration. We tried to restart, replacing the mouse and even unplug the mouse entirely without any change in behavior. Anyone know what may be causing this? This machine was installed Friday (today is Monday) and worked perfectly all day Friday.
Hello WindowzNoob,
Thanks for posting your query on Microsoft Community forum.
As you mentioned that this computer is a new installation of Windows 7, so there might be a chance that the drivers are not updated. Then I suggest you to update all the drivers of devices from the link provided below and see if it works for you.
Before you update the drivers, you try to run the troubleshooter under construction for hardware devices.
Open the hardware and devices Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
Now if you're talking about drivers then you can follow the steps described in the following Microsoft article and see if it helps to update the drivers.
Update drivers: recommended links
Automatically get recommended drivers and updates for your hardware
If the problem persists, try to update the drivers from the manufacturer's website and if you can't find it, please provide us with brand and model of your computer and we will help you find the latest driver available.
Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.
Thank you.
-
I would like to create an extension that can be used to educate users novice/elderly on potential security threats. I'm under the impression that most of the users do not fully understand Firefox security warning and the threats that these warnings are used to protect against.
See the Mozilla Developer Network (DND) site.
https://developer.Mozilla.org/en-us/apps/reference -
Structure of the event can detect the minimized window
Can the (LV 8.5.1) structure of event to detect when a window is being reduced?
Yes, you can!
The event 'Panel resize' is the raised event:
Tone
-
During the synchronization of music files, you have 3 questions,
1-WHY some said files already added to the device, even if the memory card is empty?
2-is there a way to configure windows media player to detect songs appearing twice and automatically delete them or just simply not add syncing? IF Yes please let me know how.
3-How do you stop sync everything in windows media player when in sync I put only some songs, but it always adds all the music, 5 star music AND photos? How we prevent that?
Hello
Follow these steps and check if they help.
Step 1:
You can re-create the database of Windows Media Player and see if that fixes the problem.
To resolve this problem, delete the Windows Media Player database. To do this, follow these steps:
a. exit Windows Media Player.
b. Click Start, type %LOCALAPPDATA%\Microsoft\Media Player and then click OK.
c. Select all files in the folder and then click on Delete on the file menu.
Note You don't have to remove the folders that are in this folder.d. restart Windows Media Player.
Note Windows Media Player automatically rebuilds the database.Step 2:
If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:
a. exit Windows Media Player.
b. Click Start, type % LOCALAPPDATA%\Microsoft and then click OK.
c. Select the Media Player folder, and then click on Delete on the file menu.
d. restart Windows Media Player.
Note Windows Media Player automatically rebuilds the database.With respect to the timing, I would have you read the following article.
Windows Media Player sync: frequently asked questions
http://Windows.Microsoft.com/en-CA/Windows-Vista/Windows-Media-Player-sync-frequently-asked-questions -
Hello! This morning my Windows 7 (the motherboard Acer) desktop ceased to recognize the wired connection to its network card. In other words, it shows kind of connection, but notes "no Internet access. It connects to a surfboard by Motorola through one Ooma hub, although I encounter the same problem when I connect to the desktop directly to the surfboard. All other devices Wi-wired and that connect to the surfboard are functioning properly.
Thinking that the Realtek NIC on the motherboard Asus was the problem, I installed a new Trendnet network interface card in the PCI slot. I disabled the network card to the motherboard via the BIOS settings. No change. Always 'no Internet access.
Time Warner Cable test the modem from their office and said it was working properly. I also connected a laptop directly to the surf board using the same cable, and he was able to connect to the internet.
Can someone help me understand what the problem is? Thank you!
You have McAfee? McAfee has been updated at the same time as the last batch of updates from Windows 7 and this is the cause of problems of internet connection for most, if not all, users of McAfee.
See the communication from this "criticism" - McAfee
You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.
I had to run the removal of McAfee Development tool a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat
-
Can adjust the audio levels with a single clip
Very simple question that drives me crazy. Just before I post, I'm a complete to this noob please go easy on me.
I'm editing a podcast. It is a clip, a track in first pro. My sound levels varies between-3 and - 12db through recording due to parts where I speak louder and quieter. I need to balance a little better, to make the quiet parts louder.
I don't know how to do this outside the insertion of keyframes volume level in the clip, which is slow and manual and takes forever.
Every search I do to normalize levels is all about several clips and by adjusting the maximum peak in the same, that will not help me.
Thanks in advance!
Adobe Audition is a speech Volume Leveler you might want to check.
-
Flex can detect the browser close event?
Is Flex notified by the browser when the browser is closed (or browser tab)? I need to be able to record all the unsaved data in the application until the browser is closed.
Thanks in advanceThanks for your reply.
I found a good example that I followed and got it to work: http://flexblog.faratasystems.com/?p=134
-
What level of TypeKit is included in the creative cloud?
I can't know what level of TypeKit is included in my creative cloud subscription, or how to take advantage of it. What is included? What are the restrictions? How I started with it? (And no, not with Muse lol).
The portfolio plan. If you connect to Typekit, you should see that this indicated here https://typekit.com/plans. Under portfolio must be marked "your plan".
-
L7780 HP 'add a device' can not detect the printer on the network
I have a HP OfficeJet Pro L7780 printer and a laptop running Windows 7 Hp. The HP Solution Center has stopped working recently and now gives a message error "HP Solution Center cannot work because your installation of the device is not complete."
I've uninstalled and reinstalled the software "OJProL7X00_Full_14.exe" and when I go to 'Add a device' it cannot find my printer on the network, even when I enter the IP address.
I ran "OJ6500vE709_Scrubber_14.exe" - bird 1-2-3-4 and it did make a difference.
The printer is connected to the network and I can add it as a printer in the window "Devices and printers" window so I can print to it, but without the HP Solution Center software, I can't scan.
So Windows can detect the printer on the network and when I add the printer in this way, all 4 computers connected to our network can print to it fine.
HP Print & Scan Doctor detec the printer on the network can. When I run that it is said that the comprehensive software solution for your product is not installed on this computer and when I click on the button 'Install Software', need me just the OJProL7X00_Full_14.exe file. The software seems to install fine but I can't add a device.
HP printer install wizard for Windows can detec the printer on the network. When I run that it is said that the current full HP software is already installed and drivers seem to be installed correctly. A test page will print perfectly.
But "Add device HP A" not somehow the printer detec.
Please notify.
Hello Impact,
I see that you spent a lot of time trying to solve the problem of the HP Solution Center not allowing you to scan. Uninstall and install it, rub the software and execution of printing and scanning Dr. / Printer Wizard are all the steps I would have suggested do you.
I would like you to follow the steps described in this document from HP: the progress bar on the Software Installation stops or stalls, many steps in it you all ready done but please follow the document from top to bottom.
Before you start to trouble shoot the issue still provides also the computer is not connected to a VPN (Virtual Private Network) and you can access the printers on-Board Web server by entering the printers IP address in Internet Explorer.
Let me know how this document from HP has helped.
Thank you
-
Widgets: can we detect the language selected in the device?
Hello
Trying to do a multilanguaje UI Widget,
and I do not see if we can detect the language selected in the device of the user?
Depends on the language I want to launch a page in the English user interface and menus, or page menu and Spanish user interface.
Any idea?
Thanks in advance.
All the best
Auto answer:
It is possible to detect with: navigator.language
-
Directions to see the ink levels does not work - apparently missing option?
Hello. I have a deskjet D1341. My operating system is windows vista. I use to be able to find where I can check the ink levels for my cartridges but now cannot. I was in line and followed the instructions precisely, but it seems that there is a service tab is missing at any given time. Can someone guide me through it may be. I go to control panel.and then what?
Kryten,
Nothing has worked. I want to thank so much however. I wish more people were as sensitive and sincere to help like you. We'll waive it.
Thanks again!
-
Hi, I'm trying to record a radio show that we do. I connected to a USB sound card main mix and can see the hearing levels, but they are far too high. I want to be able to use the mixer and just go in the orange LEDs so want to reduce the level of entry into hearing, rather than reducing the fader master on the desktop. I tried to use the effects Rack and make one - Cut of 6db. While this reduces the levels on the great indicator of level, it does nothing for the little meters on the track or level which is actually registered. How can I reduce the level which is registered?
Ben
As the so-called ryclark, hearing simply records what is called by your interface - input levels must be adapted to the interface, so that you use here is the crucial question.
However, I will go a little further and say that if your levels are as high as you say, you may well be overloading the entry to the interface itself with distortion occurring before the signal happens anywhere near hearing.
Just a hunch, but many drummers have their main outputs on XLR for the level of the line, but many interfaces use XLR just for the microphone level and need a quarter inch TRS jack for level line as a mix-simple to fix with the appropriate cable. Any chance that this could be happening?
In the contrary case, we need the details of your mixer, interface and how you have connected.
Maybe you are looking for
-
Trying to update my iPhone 6. The message I get says requested updated. It has been like this for more than 24 hours with no updates.
-
Original title: i/o ERROR. The process is interrupted. I am running with Vista. I want to see the pictures with my new camera of the early 1800s of Fuji. I have loaded the FinePix CD into the computer and got the above error. I uninstalled and reload
-
I can't get my computer out of safe mode.
I can't get my computer out of safe mode. Is there a step I'm missing that the selection of the normal mode? I continue to restart and hit the F12 key to enter the boot menu, I choose start in Normal Mode and it maintains safe boot mode.
-
DVD player works, but internet browser has no audio - Inspiron e1405
I messed up my audio somehow, and I'd really like an overview of the setting. I have an Inspiron e1405 running Windows Vista. Some time ago I tried to update the audio drivers to fix the well known audio bug crackling. I finished by having always th
-
Why the option expand (lightroom CC) does not work?
I need assistance with the option to the point, my picture does not appear, only a blue box appears. Help, please