a jet of light loading port

Similar Questions

• HP ProBook 6455 Notebook 14 "b: no operational function computer, other than blinking yellow, light load.

  HP ProBook 6455 b 14 "laptop, windows 7 Pro (32-bit or 64 - bit?) certified refurbished.  The only operational fuction is flashing yellow light load.  There is no indication of another function of operational computer (no video, sound or anything else).  The bright yellow of load is a light flashes when the power cable is connected.  No activity when it is not connected.   Discovered that there was a recall on the LS-15 worded power cable?  However, does not apply the power cable provided with purchase of the laptop.  HP Pro Book bought on 18/08/2015 and currently still guaranteed manufacturers less than a year (HP).  But impossible to determine a repair services provider who is authorized to manage the guarantee of manufacturers (HP).  The question above malfunction only occurred once since the purchase of the laptop and does not work since the accident.  Please advise on the problem, if known and how the process of repairs handled with HP warranty.

  Remove the battery and then plug the power adapter.

  Press the power button.

  The laptop starts at the Windows login now?

  If so, the flashing led you had with the battery connected, indicates that the battery does not and must be replaced.

  If it is not the case, the adapter sector or systemboard has failed. and you should contact HP to service warranty from the manufacturers.

• Led flashing light charging port

  Hi the charge led socket flashes white when connected. When laptopis turns off, it flashes for a while and then turns off. But when the laptop is turned on, it flashes all the time, whether they are connected or disconnected. Help, please.

  Hi @Reaper93,

  Welcome to the HP Forums!

  It's a great place to find answers and advice!

  You have the best experience in the HP forum, I would like to draw your attention to the HP Guide's Forums:

  Learn how to post and much more.

  I understand that when you connect the AC adapter of the power port light flashes continuously. If you turn off the laptop light continues to Flash for a while and then turns off.

  You connect directly to an electrical outlet, or you use a power bar?

  Have you tried another outlet?

  Here is a link to the HP laptops - tests and using the AC adapter that should help you.

  Please let me know the results.

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as yourself. Please consider tagging the post in order to solve your problem as "accept as Solution" to help other members of the community!

  To show recognition for my efforts, please click on the Thumbs Up icon below.

  Good luck and happy holidays!

• lights of port Ethernet turn only not on dsl port will not turn on.

  just got dsl modem, smart rg model SR100G, after plugging the ethernet cable, of lily for dell inspiron 8100 laptop, no port lights and no computer laptop port lights.when I tried to conect to the notice of the net web incapable of connect.connection tested cable good.presently using the dial upward. CHECKED in the properties of INTERNET PROTOCOL [TCP/IP] and confirmed that the ip address, subnet mask default gateway fields are empty.

  Seems that the problem is with the modem. Contact the manufacturer of the modem or your ISP.

• loading port does not

  I bought my 14 year old son, what a Tablet HP slate for Christmas from PC world to the United Kingdom and there the first time not taken their extra cover for items but only 4 months later my son Tablet does not charge. It was the load on his PC when he took the cable when he was done, he thought he saw something out with her but couldn't find anything, and now it will not load. When I took it to PC World yesterday, they said that they could send it back to HP, but they do not think that this would be covered by the warranty even if it is only 4 months old. Now left with a useless item which cost £129.99 unless they said that I wanted to pay between 50 and 70 pounds for repair. It is ridiculous for money surely something should be builtto be more robust and to last longer than 4 months

  The micro-usb ports now commonly used on many devices (tablets, cell phones, etc.) is less robust & requires extra precautions or damage results frequently... I asked a worsening your problem. I hope someone from HP will contact you via PM inbox here at the forum, next week.

  Once you repair a training session short with the owner in the handling of the rope/port would be beneficial.

• 15 - j116TX: Woint HP Envy plugged, no. light load, no one else saw, turn on

  Hello
  My laptop HP Envy 15 has started having this problem about 2 months ago. I was in class and it was connected to the power supply when suddenly the computer crashed. No warning, no screen closed. He immediately disabled. Unfortunately, it is a few years old and the warranty expired in January this year. I haven't had the material updates/changes that it came completely out of nowhere. Then I went home and plugged. There was no power charge light next to the power cord on the side of the laptop, however, I came back 20 minutes later and there was a cool white light. I then it turned on and it was for about 10 minutes before it crashed again. It sits on my desk now on the charge. seeing none on or whatever it is and it won't turn. I tried to put running on the battery, I have tried just on the current and none work, any suggestions would be appreciated

  Hi @Jasotufy2,
  
  I hope you enjoy your visit to the HP's Support Forums. I understand that you have a problem with the computer to turn off. I'll be happy to help you.

  Please see the following documents.

  Using and testing the power adapter AC

  Battery not power Notebook or hold a Charge

  Computer hangs or freezes (Windows, 10, 8)

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• HP t620 Flexible Thin Client: Windows 10 IoT Ent. Client light-load Multi Touch

  Customers light t620 (Std/MORE) running 'Windows 10 IoT Enterprise for Thin Clients' supported multi touch? Or alone only?

  Having a hard time finding a definitive answer online.

  Thank you

  The answer is Yes.

  See Page 5... http://WWW8.HP.com/h20195/v2/GetPDF.aspx/c04312126.PDF

  "Smooth, immersive experience with technologies like advanced multi-touch and Windows® 10 applications"

  -Keith

• HP Office Jet J6480: high load or work around the Board in an HP Officejet J6480

  My HP Officejet j6480 isn't all recognize the high bypass tray of the page. I would like to know how to do so that he can feed on this top. So are there specific instructions to put a sheet of labels badge or business card labels in this sandbox?

  I tried to load sheets of labels into the tray of ordinary inside and crunched printer just to the top of the label.

  Hello @klsurmi,

  Welcome to the Forums of HP Support!

  I understand that you are having problems loading labels in HP Officejet J6480 all-in-one printer. I would like to help you today with this problem to feed paper. On this particular model of printer paper for printing a single sandbox there. It is the main tray at the bottom of the printer. The 'top' I believe you are talking is only used for faxing, copying or scanning automatic document feeder. Below, I will give instructions for properly loading paper in the tray of your product. Once you have confirmed that your labels are properly loaded we will test print in order to confirm if the problem is resolved.

  Step 1: Load the paper:

  1. lift the output tray.

  

  2. Insert the paper with the side to be printed down along the right side of the status bar. Make sure the stack of paper is aligned with the right and rear of the tray edges, and the height does not exceed the line marking in the status bar.

  

  3. slide the paper in the tray to fit the paper size you have loaded.

  

  4. lower the output tray and pull out the tray extension.

  

  -Source

  • For the labels, you can load up to 100 sheets of labels in the paper tray at the same time.

  Once the labels have been loaded properly, please print a test to confirm if the paper feed problem has been resolved. If the problem persists please let me know that the size and weight of the paper label is that you use.

  Please reply to this message with the result of your troubleshooting. Good luck!

• Laser jet P2055d: rear USB Port stuck in the printer casing

  The female port back where the USB cable is connected to the printer was broken, loose and abandoned inside the case. Looking for a manual or tips on how to safely disassemble the casing plastic, so that I can fix the hub of port in place.

  Quick follow-up...

  If you buy a used of course trainer, is he a 2055 D printer, if the trainer comes a host of Simplex, that it will not print 2 sides of your machine.

• PowerConnect 5448 Port lights flash up to 10 times per second in unison

  The ports on our PowerConnect 5448 switch lights flash very quickly in unison.  We use this switch to an office network.  No servers or computers are available on the network.  We believe that this was due to a power failure which resulted in a failure with our internet connection.  We have restored power to the modem and restarted the firewall because it was out.  Then, we noticed the lights on the switch.  We have manually operated switch PC 5448 and then turned it back.  The switch always shows the same problem.  We can connect directly to a modem, so we know that we have internet.  It seems that something is wrong with the switch because of the flashing lights of port.

  In addition, the admin user and the password to connect to the switch are lost, so we cannot see what is happening.

  There is a port of the console to the back of the switch. Connect to the port console and you will have access to the CLI. Once connected to the CLI it should give an idea of what's going on.

• Acer Nitro V17 - battery detected, no load, only run off charger

  Recently I opened my new acer nitro v17 to install an SSD to move my OS on. After placing any income in the order. The portable lights without connected charger. When the charger is connected, the laptop lights up and indicates that the battery is at 88%, but once the charger is removed, everything stops. If anyone can help that would be great thanks.

  TL: DR - battery is detected, do not load, only trickles charger

  The screw located below (the one under the loading port) must be screwed in all the way. I discovered this when replacing the two discs. Make sure all of the tabs are broken and everything is secure. If something is loose it will not load properly.

• Z5 premium loading problems

  It's my biggest problem, just loading port does not work properly! I connect it, it charges fine, 100% in an hour or two, and then it drains all day, I come home from work, of about 8-5/6 downs for about 50/45% I plug in and without fees or worse still to halfway through the day it will pop up saying charger not charging battery, with nothing plugged into the charger! It just died on me and does not at all, until I connected it to my computer via fastboot and lil blue light appears and is now in charge. Slowly, but is in charge. any ideas as to why it does not charge via wall charger? all official and about 5 cables he was in charge, in the job very well. I'm going home and it does not load.

  Another problem is when I turn it off (press the power button > turned off) it is not off, it never restarts, red light, sony, screen, black-repeat.

  Any ideas?

  @ulisesbretana85

  Contact your Local support as it may be a hardware problem, you can also fix it with PC

  Xperia Companion (XC)

  Software repair Guide

  Alternatives on how to backup Xperias

  http://talk.sonymobile.com/thread/36355

• Problem with Port on the DV7-3079wm of charge

  Hello world.  I searched the forum for this question and other places and I think I probably know what is the problem, but I wanted to make sure that before I go ahead with trying to fix and get some advice on my specific problem.

  I have a HP Pavilion DV7-3079wm running Windows 7 64 bit.  I have problems with the laptop to load.  I've already replaced the battery to eliminate this problem, but I need one anyway, because one was not maintain a load more.

  So the problem is when I plug my power adapter most of the time that he does not even recognize that I have it plugged.  No light load on the side or the front.  So if I slowly wiggle out or try to angle in one sense or the other, eventually he'll catch a connection and then 1 of 2 things going on.  Either she viewed the laptop too long that I do not move the charger of whatever the position in GOLD, it pops up a message saying "Smart AC output adapter is too weak for this computer." and then proceeds to the load of the laptop or it just says: "plugged in, do not load.

  I do not know if my problem is the AC adapter or if the port inside the laptop is messed up, which from what I've read on other forums requires either a new motherboard or tear down my laptop and re - solder a new fee on the motherboard port.

  I can't wait to buy a new adapter if it isn't the problem.  Also another problem, I am very happy with my laptop and really intended to max on memory and improve for one SSD but I don't want to sink money into it until I get this problem resolved.  Any help would be appreciated.

  Thank you

  No rust spots on the inside or outside of my plug adaptors CA.  I finally just went and got a new adapter and when comparing it to mine its all brilliant inside the end of the plug where mine is dull looking.  Which may mean it was just salty and was not getting a good connection.  A new Bill without problem, and immediately, although she Wiggles, if fortunately is not the port inside the laptop.  I'll try to clean my AC adapter / CC and see if it makes too much work again.  Thanks for everyone's help and info that it was appreciated and he has helped guide me in the right direction.  Also, if the port never turn off, now I know where to get a replacement.

  Up next... go to the SSD & maxing out the memory.  I can't wait!

  Thank you!!!

• Apple tv remote siri cannot load

  remote control don't turn on now, no response to all the

  There is no indication of light load on the remote control of Siri.

  However, you should see an indicator on the TV screen.

• iPhone 6, one side of load

  my iphone 6 now load only on one side, I tried different usb cable and no luck. After doing several searches online, I replaced the loading port and apparently did not help. phone is out of warranty so the apple support will do nothing.

  any thoughts of what could cause this?

  I do not understand your question?  What do you mean "only the load on one side?  Pin male lightweight port is bidirectional, but female lightning port has pins on one side.