A Lexmark E210 Laser printer is not recognized under Windows 7 64-bit

Similar Questions

• Media Center IR is not recognized in Windows 7 (64-bit)

  Hello

  I have a HP m8300f desktop computer.  I bought the HP media center unit and the remote, but it is not recognized in Windows 7 (64-bit).

  I have no problem plug on my netbook acer, its recognized and works fine (Windows 7 32 bit)

  Impossible to find all the drivers on the net or the site of hp for this device, any help here?

  Thank you

  Bob

  Data sheet:

  IR unit

  Model OVU400102/00

  3139 228 6262

  Need drivers for Windows 7 Ultimate (64 bit)

  don't know what happened, but its working fine now.

  I forced to use Microsoft's ehome recv.but which could not start.  But when I restarted the computer and plugged back, he found and started to download the other drivers from windows update.

• Brother printer has not detected by Windows 7 64 bit.

  Brother DCP145C has not detected by Windows 7 64 bit. What port is recommended for the local printer - LPT1? Windows 7 should detect when the USB connection, but there is no activity. Similarly, the mode to scan on the printer is not responding to "check connection". Thank you.
  Checked the port LPT1 and COM on Device Manager and seem to work correctly. No updated driver needed updated port.

  Hello Richard,.

  If several USB devices are plug-and-play, printers need a print driver to work even on a USB port. I went to the Brother website and a research on the model of printer "DCP145C" increase any responses - are you sure the model number of the printer (not the part number)?

  You have a printer disk supplied with your printer? If you do, try to use that to install the print driver. As far as LPT1 goes, is for a printer with a parallel port (printer), and the COM ports are for those who use the ports series.

  Thus starts with the right model number and look for brother.com right print driver (or use the disc that came with the printer). Try and see if that solves the problem for you.

  Let me know how you fare.

  Kind regards

  BearPup

• Epson Perfection 1250 scanner not recognized under windows 8

  one moment the Windows 8 is up and runing.
  All except the Scanner Epson Perfection 1250.
  Old it is but where is the driver for windows 8.
  Epson has no support for this driver.

  The scanner is not recognized by window 8.
  Someone can help or do we need to buy a new one.

  Just for info. Scanner works Yes there are free external programs that can run on windows 8, but you have to pay to get rid of the watermark on each scan.

  But why the Microsoft cant recognize?

  I dropped the driver, I use VueScan. It will scan without the need for any driver.

  Work on my Epson 1650 Scanner.

• ThrustMaster Top Gun Fox 2 Pro do not install under Windows 7 64-bit

  I have a Thrustmaster Top Gun Fox 2 Pro and it will not install in Windows 7 64 bit, Windows reports it cannot find a driver.  The manufacturer says not all newer than Windows XP drivers.

  I thought about it:

  1. Download ftp://ftp.thrustmaster.com/accessories/pc/hotas/exe/HOTASCOUGAR/2007_HCO_VISTA_64_RC1.exe (Vista for their Cougar Joystick driver)
  2. Make a click on the file and choose Run as Vista Sp2 compat mode and run as admin.
  3. Run the installation program and the joystick connection when you are invited (and installed).
  4. End task on the Setup (it is always waiting for the cougar to be plugged).
  5. Enjoy!

• DVD players dual layer works do not correctly under Windows 7 64-bit

  I am running Windows 7 Ultimate 64-bit. I have a LIte on double layer DVD writer which has the latest firmware. Unfortunately, while all software can see it's a double layer capable drive, time that I try to use it, it fails. The drive itself is good because if I put in a system using Windows 7 32-bit, it burns discs double layer perfectly. I've been all over the internet for the last 2 days looking for solutions, and I have tried everything that I've heard of. Uninstalling drivers, ensuring that there is no upper or lower filters showing, uninstall and then reinstall the drive, edit the registry. Again, the drive WILL burn discs double layer in 32-bit Windows 7, but it burns ONLY of single layer DVD in Windows 7 64 bit.

  I hope that someone here has found a solution to this. Especially since I'm wanting to upgrade to a Blu - Ray dual layer burner so that I can use fewer disks to make backups of the system. I know Bu-Ray discs are more expensive, but I prefer to use 2 or 3 Blu ray discs to backup my system than 10 or 15 DVD. However, if discs double layer Blu Ray do not work under 64-bit Windows 7, then there is no need to upgrade.

  OK, 1. The drive works PERFECTLY under Windows 7 32 bit, which has all the same drivers / software that is running the 64-bit system.

  2 features of fine player like a DVD of SINGLE LAYER burner (it burns fine of the simple DVD layer), but not as a burner double layer (doesn't even recognize a DVD double layer is still in the drive, he MADE on the 32-bit system and burn them without any problem.)

  I have contacted LITE-ON and am running the latest firmware. Similarly all other drivers on the system (a new system just built 2 weeks ago). Basically, all the material on the 32 bit WINDOWS 7 are cloned on the 64 bit system. Everything is the same. Only change is the operating system.

  I've seen other forums that have been linked and tried everything suggested... which most have not even apply it. Still refuses to acknowledge that a DL disk is in the drive.

  So at this point, I'm simply not worry more. Going to buy the Blu - Ray burner and only single layer Blu - ray discs.

  Thank you all for trying to help. I guess the answer to this is that no one really knows what that really is the issue, and even less how to fix.

• HP PSC 1110 - print but not Scan under Windows 8 - not supported by the wizard online HP

  Hi all

  I wonder if someone can help me. I recently bought a new laptop from toshiba with Windows 8. The printer I have is HP PSC 1110. I have the drive and installed successfully to a degree. It prints, but it is not the scanner. When I opened the Photo and imaging HP program to analyze, it opens but regular icons are simply small squares without links or even the text. So the scan button does not work on the printer and there is no option to analyze when the program is opened - just those strange little squares where the menus and options should be. Also, if I click on a photo to open it in the program, I get the error message "could not start - Ctxld # Hewlett - Packard Pei HPQTHB08 «with the name of photo file to open the here.jpg «»

  I tried to reinstall it and I also tried printer install HP PSC 1110 for Windows 8, but at the end of installation, I get the message "the selected printer is not currently supported by this wizard.

  Can anyone help or do I really have to get a new printer?

  I hope that I didn't destroy your head!

  Kind regards

  Sinnottam

  I checked and this printer doesn't have a driver of Windows 8 for him, which explains why you cannot scan using the software of the printer.  Here is a document on how to get a generic driver: 'install a driver of Windows 8' that may be useful.

  However, here is a fairly extensive link that provides, not only of workarounds, but the possible solutions for your problems with digitizing:
  
  "Scanning device has not been initialized or errors related to.

  Let me know if all of these works.  You have not destroyed me again!

• Printer Brother MFC-495CW will not work under Windows 7 64-bit

  I have installed the Brother MFC-495CW printer on my laptop and the printer does not print. It shows the printer either 'ready' but 'offline' on the screeen status monitor. I tried to reset the print spooler and reinstalled the printer software several times. What should I do to get this printer to work.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Gamepad - "Device not recognized USB" Windows 7 32-bit

  I own an INTEX it-gpo2 plugnplay Gamepad... earlier it used to work well... but these last days, when I connect it to my pc an error indicating "USB device not recognized" I HAV changed the port, but it shows the same error... I HAV tried also to install the drivers provided on the cd, but it also won't work... someone please help...

  Hi ArkaBarman,

  This problem is usually caused due to hardware or driver related issues. I would like to know some information about this problem so that we can help you further.

  1. have you made changes on the computer before this problem?

  2 What problem confined to the joystick?

  3. have you tried to connect the gamepad on another computer?

  4. What is the model of the joystick number?

  I would suggest trying the following steps and check if it works for you.

  1. click on Startand then click Control Panel.

  2. click on system and Maintenance, click System, and then click Device Manager.

  Note If Control Panel is in Classic view, double-click System, and then click Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  3     in Device Manager, double-click on it to develop a 'Bus USB controllers', right click on the controller host, click "Uninstall" and click "OK".
  4. Repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows 7 will automatically reinstall all USB controllers.

  Please respond with more information about this problem so that we can better help you.

• pilot iPhone is not recognized by Windows 7 (64-bit) Enterprise

  When I plug my iPhone the device driver is not recognized and can not install.  The iPhone will appear as Apple Mobile Device Driver but cannot install the driver.  I can't use my iPhone as a drive hard as if I was on Windows XP.

  Usually, as with most of the iPads, iPods and iPhones, iTunes is usually required.

• Maxtor One Touch 4 external hard drive not recognized by Windows 7 64 bit

  It does not appear in Device Manager, and disk management.

  I tried all 8 USB ports on my computer.

  I have it plugged into different outlets (light still on) and tested it on other computers running Vista 32 bit and XP.

  The drive works fine on other computers, but not my new computer running Windows 7 64 bit.   Microsoft Compatibility Checker stated that this player should work with Windows 7 64 bit.

  I'd like to get this to work by car.  Any ideas?

  Hi Anthony Netties.

  Check if the hard drive is detected in the BIOS.

  BIOS: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions

  While I was looking at the Seagate site, I came across this One Touch 4 is only designed to work with 32-bit operating systems only and is perhaps the reason for computer detects it not.

  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=OT4-downloads&vgnextoid=0ed72c9e46914110VgnVCM100000f5ee0a0aRCRD

  You can also run the sea tools available in the link below and check.

  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• drivers for Canon LBP 1120 laser printer does not open in Windows 7. Help please?

  Canon produce a Vista / Win7 driver for this printer Laser 10yo, but Win7 does not recognize the downloaded driver.  Any ideas, please?

  Jake,

  Uninstall the driver, unplug the printer from the system, reboot, reinstall the driver before plugging (the printer) first, reboot the system, and then reconnect the printer back. Some printers and scanners require that you install the first printer before actually plug the PC.

  The time and date of this moment in Washington, United States of America is

  17:42
  Friday, April 12, 2013
  The time Pacific daylight time (PDT)-0700 UTC
   
  UTC/GMT is 00:42 on Saturday, April 13, 2013
              
  Current weather conditions in Seattle

  Light Rain46 ° F / 8 ° C

• Photosmart C6180 module duplex not recognized in Windows 7 64 bit

  Duplex module has been recognized and worked perfectly in Vista but there is no option to add in 64-bit Windows 7.

  I discovered a few double-sided modules which are default to off on Win 7.

  Please try this:

  Double-sided printing option is not available, even if a (duplexer) automatic duplex printing accessory is installed

  http://support.HP.com/us-en/document/c01909142

• matrix printer does not work with windows 7 64 bit, using usb adaptor.can I install a PCI to printer so it works?

  Okidata ml 184turbo 9 in printer by points, man. pilot States included with the windows software Web site 7.  The computer does not have a lpt card installed or a serial port. The printer will be seen with this card, if I can find a lpt PCI?

  Okidata ml 184turbo 9 in printer by points, man. pilot States included with the windows software Web site 7.  The computer does not have a lpt card installed or a serial port. The printer will be seen with this card, if I can find a lpt PCI?

  According to Okidata it should do, but you also tried the procedure described here Manual printer driver installation?  http://my.okidata.com/pp-ML184Turbo.nsf?OpenDatabase

  

  Also check that your USB adapter is installed (Device Manager) and the computer can set the optimal settings for the port LPT adapter (properties).

• HP 10 more 2201RA not recognized under windows 7 connected via usb

  As the title says. Receive connect the tablet to my computer via the USB port nothing happens. The device is not displayed. I followed the instructions in the troubleshooting section (Manager of peripherals and USB Root Hub etc.).

  The SDA device appear the first time that it has been connected, last night. However this morning... nothing.

  After using the connection to synchronize from the MyDocs toGO application, I unplugged the unit. I do not however the disassemble everything first.

  Thanks for the responses...

  I went with... done AirDroid work, works great and is wireless.

  See you soon