A new drive appeared in my computer.

Similar Questions

• New hard drive appeared in 'My Computer' but cannot access

  A few days ago, I discovered a "new" drive appears in my computer. He pointed to (e), but Windows can't read at all. If I click on it, a message saying "you must format the disk in E: drive until you can use it. You want to format? »

  So, when I click on cancel, do not format, the message says "E:\ is not accessible. The volume does not contain a recognized file system... "etc.

  If I right click on the drive properties and view, Windows reports the drive as having a capacity of 0 bytes.

  I think that there is a partition that was previously hidden and has of recovering files or bios, put there by the manufacturer of the computer.

  I would get hidden once again, because not only it is an annoyance, but his presence changed all designations of drive letter of my external devices (i.e., a flash used to be "G:" drive is now "H:" and etc. for other devices). It is a problem for programs looking for specific readers and shortcuts.

  As a note, I have MiniTool Partition Wizard Home Edition, for the management of the partitions. But for some reason, the option to hide this particular drive is "grayed out" and not selectable. But at least the program is able to tell me that the drive is primary and that it has met its capacity of 15.69 MB.

  Is there a way I can hide it again and restore my drive letter designations already?

  My computer is a netbook Asus eee pc 1005HA. Thanks in advance for any help!

  CrimsonRaccoon,

  Select "letter of change of road and railways.

  You will find now 3 buttons: Add, modify, delete.

  It is to remove it, I want to talk.

  :)

  Carlos

• Cloning of a disk failing on a new drive has left the computer unbootable

  I upgraded my hard drive because it is run in mode only PIO makes it incredibly slow. Some cloning software using different, I made a clone of my drive to a new drive. No matter what method or the brand of software that I use to clone the drive, whenever I try to start after the end, I get the same error "the ARC firmware startup configuration problem: has not correctly generated name of ARC for HAL (it will)..." "Is it a security measure built into XP to prevent me from cloning the drive? I lost days now trying to clone my whole disc rather than doing a complete new installation of the OS and all software. Any ideas on this would be useful.

  Ok. I don't get all the answers to this good. What I ended up doing was using a disk to reinstall XP boot to the recovery console and do a Fixboot difficulty MBR, then a bootcfg/rebuild. Seems to have solved the problem.

• Why is it not my DVD drive appears in my computer folder, but it appears in Device Manager, what should I do?

  I have a windows vista. The DVD player has been working great until today, I used yesterday for 2 CDs rip. When I turned it to play a song from a CD but autoplay ever came I went to the tab of the computer in the start menu and my DVD Player wasn't there! I went to the manitger of the device and he was there with a sign of cation on it. I click on it and the device status says "windows cannot load the diver of this hardware device. The diver may be damaged or missing. (code 39)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is solution available. "but I do not have Internet so what should I do?

  Try following the steps under "Windows 7 or Windows Vista" in the MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• How to reconnect to Lightroom 5 files on the new drive?

  I'm on a Mac and have been store that all photos and Lightroom work on an external drive. Just bought a bigger external drive and copied the entire content from the old drive to the new, including my Lightroom folder with all its subfolders. I have the new drive appears in the left pane, under 'files' and I thought I could just pick up where I left. But my folder structure does not appear, and I can't access my images. How to get reconnected to my Lightroom structure on the disk?

  Hi johnz5519,

  Please take a look at the following article: http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm

  It should be useful to reconnect files in Lightroom.

  Kind regards

  Tanuj

• After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer

  After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer. Also I can't 'manage' my computer because I do not have "permissions". I tried a fix he 45071 and it did nothing.

  Applications, (Norton and McAfee) (including free evaluation versions are notorious for not not upgrade (or uninstalling) itself.) If NIS has been installed for 3 years, you have NIS update at least once and maybe twice (e.g., NIS 2009 > NIS 2010 > NIS 2011).

  [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) viaControl Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of NIS 2011 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

  7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

  8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  9. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run that set it by DEFAULT and modes and AGGRESSIVE. [1]

  10. restart once again & test.

  NB: Installation KB971029 disables AutoRun/autoplay on USB connected but not 'brilliant media' external drives (i.e., CDs & DVDs). See http://blogs.technet.com/b/msrc/archive/2011/02/08/deeper-insight-into-the-security-advisory-967940-update.aspx

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Drive external DRIVE does not appear in my computer

  Windows says new hardware detected... your new hardware is installed, but it does not appear in my computer. No drive letter is assigned.

  Can anyone help?

  Do you use an external USB HDD? Does a job on another computer?

• 27-a010 all-in-One Pavilion: why the hard drive from my old computer Toshiba displayed on my new HP c drive?

  I got this new computer on Monday. The reason why I bought a new was that I suspected that my old Toshiba got compromised. I even bought a new Linksys router that was AC 1900. My new HP computer has McAfee and uses MicrosoftEdge browser. There are several interesting questions, I hope that experts from HP can answer for me.

  1. why my old Toshiba drive appears on the hard drives in the Device Manager?

  2. Why are there readers D two on disk management? Can't update my Windows 10. I bought a new computer.

  3. why hiberfil.sys and pagefile.sys, swapfile.sys, BOOTNXT appear on my drive C Windows?

  The above synptoms are normal? I need to do something about these questions or just leave them along? I have a microsoft all in one account.

  Thanks for the reply.

  Hello

  I don't see your screen but:

  1. new machine uses Toshiba HDD, not your old machine of Toshiba. HP uses HARD disks with many suppliers, including Toshiba.

  2. Yes, it is normal. One with the file system is the real, without file system is a shadow one.

  3. normally, they are hidden system files, you can hide them if you wish.

  Kind regards.

• 2nd hard drive appearing is not in my computer

  My 2nd hard drive is not appearing in my computer.  The hard drive was a slave, that I took from my old xp machine after it crashed.  I had installed in my new vista machine before and it worked, but then I had to reinstall the operating system and since then he did not appear.  I double checked to make sure, it has been defined as a slave drive and it is.  It appears in the Bios, Device Manager and in disk management, but not in my computer.  Nothing is appearing as unallocated in disk management and the player said his good health.  In the Device Manager, it says the device is working properly.  I tried to give him just a drive letter in the management of records, but when I right click on it the only option I have is help.  I also tried to update the drivers, he says that they are up-to-date.  I tried deactivation and activation of the hard drive.  I even tried to uninstall.  When I rebooted, it detects and reinstalled the drivers, but I still can't get it to appear in my computer.

  Alw179,

  so I assume you are using the new Windows 7 for this post.

  Proposal of John Doe has worked for me. This is how do you a little more in detail:

  step 1: Windows 'Start menu '.

  Step 2: SPECIFY the, "disk management" in the box "search programs and files" at the botom

  step 3 find and RIGHT click on the hard drive in the list that program shows.

  step 4: select 'Change Drive Letter and paths '.

  step 5: click Add and make sure that ASSIGN it THE FOLLOWING DRIVE LETTER: bubble is selected and then use the drop-down menu to select a drive letter, do not use it.

  step 5: click OK

  step 6: complete, you should have something pop up indicates that your hard drive is available to show.

  I hope this helps.

• When I plug the USB FLASH drive into the PC it does not appear in the computer

  I have a USB Flash driver: Team Fusion more 4 GB

  Like this one:
  
  Same color and this one exactly.
  and when I put inside my computer I hear the BLOOP sound when I insert it and also when I go out, I hear a noise... but when I go to my computer it does not appear...
  It worked before, I inserted my USB Flash driver inside my computer... then when I right click on a file inside driver flash my computer got stuck and I force restarted my PC with exit it restarts normally and after that it doesn't work any more I just hear sounds when I insert the USB key inside and outside.
  I tried things.
  -Troubleshooting and it didn't help me at all... He didn't show me something when he finished it.
  -Tried restarting the computer and access bios and active in the advanced settings in the number 3 to USB - ZIP
  -J' inserted behind my computer and also in front of the computer USB flash driver.
  -Computer all analysed in depth scan with Advanced System Care Pro 5.4 and did not help even after a reboot.
  -Tried to reinstall the driver for the "Device Manager" USB flash drive
  -IMPORTANT! I tried to plug this USB on another computer and it arises there, but could not access the USB key, I tried to format and it says error and he said that he could not format... I tried to format it in NTFS, fat32, with formats fast and quick, but nothing has worked.
  SO the problem is with the USB FLASH DRIVE! not the computer...
  Help me please :| What should I do?
  Image when my USB driver is inside my computer:
  Open the image in a new tab to see full size image.
  Picture that shows that I reinstalled the driver for my USB Flash drive:
  

  Yes man, he is in disk management. I tried to do a right click on it and clicked on «letter of change of driver and paths...» "and it came up with error... Look man, I fixed that by myself... the flash disk is cool now xD you know what I did? I just went to my dad's pc... I tried to get the DRIVER USB FLASH, but he came up with the error and asked if I want to format it... I clicked format and it didn't work... I tried NTFS, FAT32, format not quick and fast and nothing worked... it was still * place... so what I did? I downloaded "HP USB Disk Storage Format Tool 2.2.3" of http://www.softpedia.com/get/System/Hard-Disk-Utils/HP-USB-Disk-Storage-Format-Tool.shtml here and then I formatted it with success! and then the flash driver disk worked on my dad's computer but when I tried to connect it to my pc, it does not appear lol but it worked on other computers, so it's cool: P I just going to format my PC: P it works now with the USB HP program disk formatting tool. only does not not on my pc, but it's ok... I formate my pc. :)

• My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also backed u

  My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also saved to the time capsule. Everything is in 'Data' when I look through the Airport utility. I think that the information that I've lost are still there since I was a Capsule 3 to.

  Time Machine backup to a sparsebundle.

  The sparsebundle will use the share name of computer. So, it should be obvious who is your Macbook and that is your Macpro.

  Open the sparsebundle in Finder and keep open the subfolders until you get to the backup of each separate hard drive...

  You has of course set the exclusion in Time Machine?

  By default, Time Machine will exclude your second drive unless you have included it. Did you?

  Once you get to this level during the backup, you can do a full restore manually whenever you want.

• I don't have a 2nd computer.  Is it possible to migrate an external backup, and then on a new drive hard mac?

  I don't have a 2nd computer.  Is it possible to migrate an external backup, and then on a new drive hard mac?

  Use Time Machine or a clone to copy to the outside.

  Time Machine Basics

  Basics of Time Machine (2)

  Time Machine Basics (video)

  Time Machine FAQ

  First Time Machine backup

  Clone - Carbon Copy clone          (Often recommended because it has more features than others)

  Clone-data backup

  Clone-Deja Vu

  Clone - SuperDuper

  Clone - Synk

  Clone - 6 tested Applications Software

  Time Machine from the Clones and Archives

  Commonly used backup methods

• Toshiba Canvio Basics HARD drive does not appear in my computer

  Hello

  I have a HDTB110AK3BA - Toshiba 1 TB Canvio Plus Portable Hard Drive for storage 3.0 Basics and the computer will allow it to connect, but it does not appear in my computer / pc is in Device Manager thought but not my pc

  Please help and Windows 7 or windows 8.1 PC do the same thing.

  Hello

  I found the description of the product of this external HARD disk:

  Product features:
  • USB 3.0 - powered portable add-on storage.
  • Voltage of bus capable USB, no need for AC adapter.
  • Easy to use with no software to install.
  • Adapts to large digital files with spacious storage capacity.
  • Protect your drive (internal shock sensor and ramp loading technology).

  Specifications
  • Capacity: 1.0 TB
  • Interface: USB 3.0
  • Transfer rate: up to 5 Gb/s
  • Speed: 5 400 rpm
  • Average access time: 12ms
  • Cache buffer: 8 MB

  It is a HARD USB 3.0 drive. No doubt the HARD drive is not recognized correctly in windows exploerer due to the low power.
  The USB 2.0 port common feeds only 500mA. The USB 3.0 device must be able to 900mA.
  Therefore, it would be advisable to connect this 2 ports USB 2.0 HARD drive with a USB Y cable

• HP ENVY 360: Need to update driver on the new laptop to run graphics - computer says contact Lim

  I just bought a new HP laptop and I am trying to run a new application of video game that says I have an error AP301... apparently the driver on my system is later and only available at HP as a custom product - I would like to upgrade to the latest Intel driver but the Intel guys send back me to HP because the driver on my repressive owns HP...  I feel stuck... any suggestions?  Scott

  Here's what you need to run FORZA Motorsport 6: Apex. You need 2 GB dedicated and your video card has 128 MB dedicated.

  The GT740 is minimal and the Intel HD 520 is much less powerful:

  http://www.game-debate.com/gpu/index.php?gid=3285&gid2=1247&compare=intel-hd-graphics-520-mobile-vs-geforce-gt-740m.

  In other words, it is a challenging game that will simply not play on your computer. The game requires a new driver because it detects that some functions it must run are not taken in charge and on some video cards, a driver update will correct this, but your problem runs deeper than a few drivers way.

  Forza Motorsport 6: Apex system requirements

  	Minimum	Recommended (1080 p at 60 frames per second)	Ideal (4K at 60 fps)
  OPERATING SYSTEM	64-bit version of Windows 10 1511	64-bit version of Windows 10 1511	64-bit version of Windows 10 1511
  Processor	Intel Core i3-4170 3.7 GHz	Intel Core i7-3820 @3.6 Ghz	Intel Core i7 - 6700 k @ 4 GHz
  GPU	NVIDIA GeForce GT 740 AMD Radeon R7 250 X	NVIDIA GeForce 970 AMD Radeon R9 290 X	NVIDIA GeForce GTX 980ti AMD Radeon X fury
  Disk space	30 GB	30 GB	SSD + 30 GB
  RAM	8 GB	12 GB	16 GB
  VRAM	2 GB	4 GB	6 + GB
  DirectX	DirectX 12	DirectX 12	DirectX 12
  Suggested entry	Xbox controller 1	Xbox controller 1	Xbox controller 1

• Computer to read DVD - one message says that I can not read the DVD, except that I have installed a new driver.

  I have a new Toshiba C650 laptop, and he says that I can not read the dvd on it except that I have installed a new driver. Is this true?

  Hi Bill,

  To be honest, this sounds ridiculous but if you get a message, I suppose it could be possible even if I find it incredible.  Do you have it in a (local or online) retail store or Toshiba?  By any chance did you upgrade from the DVD player when buying (where they may have accidentally neglected to update the drivers of the drive that was originally installed)?

  As it is new, Toshiba should help you with this.  Here's the contact page: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/navShell.jsp?cf=su_contact&pf=true.  Give them everything they need to prove that buy you it and it should be under warranty and then give them the message Word for Word, that you have found.  They should be able to help you.  They can, for some reason I don't know, you don't need to help or guide you through a new driver installation.  I ask for a clear explanation of why this is necessary on a new computer and, if you are not satisfied with the response, ask them to consider that all the faulty computer and replace it.  Even if they won't, he needs the get them less motivated to solve your problem.

  I hope this helps.

  Good luck!