Adding 1142 points of access to existing wireless network

Similar Questions

• Local access only on wireless network

  My laptop (Toshiba Satellite L350-203 with Vista SP1 HPE) has lost the ability to connect to the internet using my home network. I have McAfee Internet Security and charge of IE8, but both were present before the problem appeared. My home network is now displayed as 'unidentified public network' and the laptop has "local access only". He seems unable to keep the WEP key for the network as it asks everytime I try to connect. I confirmed that the WEP key is correct. There are 3 other computers in the House that connect without a problem, so I guess that the router is not the source of the anomaly. I tried accessing another network to another place (with any necessary safety information) but get the same result, so that other computers can connect successfully. I am able to access the internet via an account mobile broadband (using a "dongle"), but I added this account after the problem appeared, so once I don't suspect it as being the culprit. Diagnosis in the "network and sharing Center" routines are unable to solve the problem, so any help is most welcome.

  Roy Mac

  Hello Roy Mac,

  Thank you for using the Microsoft Windows Vista Forums.

  You receive an error or the error codes when you try to connect?  You're obviously network savy upward so if something seems repetitive please ignore, you tried to delete the location and replace?   Is there any software for the high account mobile broadband that could changed settings?  Are you able to connect to the router with an ethernet cable access to the internet without problem?

  A wireless network uses authentication and encryption to help stay secure. Authentication controls access to the wireless network. Encryption helps to ensure that malicious users cannot determine the contents of wireless data frames.  Windows Vista includes a new wireless network configuration setting. The new setting indicates whether a wireless network is broadcast or not broadcast. You can also use the new configuration setting that a Windows Vista wireless client connects to a non-broadcast network.

  I've added two links below one for Microsoft and one for the installation of networks and networks the Toshiba site.  Please let us know status.   Thank you!

  The software that you used with Windows XP to connect to wireless networks is not compatible with Windows Vista. Alternatively, you can use Windows Vista to configure wireless networks.

  To connect to a wireless network in Windows Vista, follow these steps:

  1. click on Start

  Collapse this includes this image

  , then click on connection to.

  2. click on the wireless network you want to connect, and then click connect.

  Note During the connection process, you may be prompted for a key WEP Wired Equivalent Privacy (). If you do not have this key, contact the network administrator to help wireless.

  For more information about connecting to wireless using Windows Vista, see the Microsoft Web site at the following address:

  http://TechNet.Microsoft.com/en-us/library/bb878035.aspx

  How to connect to a wireless network in Windows Vista
  http://support.Microsoft.com/kb/928429/en-us

  Toshiba.support:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/outFrm.jsp?ofId=AskIris&SearchString=wireless+connection+Vista

  Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• After that Windows 7 conclusion "No Internet access" in the wireless network?

  I have a USB wireless network card installed in my office. All judging by the "connected network" showed, that he manages to connect to my wireless router, with I can't visit all websites due to "free Internet access". Only if I move my router where (almost) no wall blocking the path between my office and the router, will be solved the problem.

  There is no problems surfing the Internet using my laptop (Windows XP) and the iPad, which also connect to the router.

  I don't know what "No Internet access" while "Connected network" appears. To understand this, perhaps I should know what Windows 7 draws the conclusion "No Internet access" to the wireless network.

  Thank you, everyone. I managed to figure out the problem last night. With this document that I found by Googling, http://www.usb.org/developers/whitepapers/327216.pdf, I tried to disconnect my DVD ROM USB plugged next to my wireless network card and found that this really WORKED, although the DVD ROM is USB 2.0 instead of 3.0.

  In addition, as Shawn "Cmdr" Keene [MVP] said, I really need to I ignore the message "connected network". I ran the Ipconfig/all command frequently and found that sometimes the IP address of my wireless network card was no longer * 192.168.0 and the gateway, and the IP addresses of the DNS servers are null, even if the message "Connected network" remained all the time.

  Hope this helps others who also have this problem, even though my English is not very good. : )

• Dell laptop impossible to access WiFi, no wireless networks detected.

  I have a Windows Vista Home Premium system running on my Dell laptop. The Windows wireless does not allow me access know why I can't use WiFi on the computer. Wireless networks are not yet found. How can I get this fixed?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem
  • Signature of the problem:
  • Problem event name: APPCRASH
  • Application name: vssvc.exe
  • Application version: 6.0.6002.18005
  • Application timestamp: 49e01f2c
  • Fault Module name: ntdll.dll
  • Fault Module Version: 6.0.6002.18005
  • Timestamp of Module error: 49e03821
  • Exception code: c000007b
  • Exception offset: 00009eed
  • The system version: 6.0.6002.2.2.0.768.3
  • Locale ID: 1033
  • Information additional 1: 9 day 13
  • More information 2: 1abee00edb3fc1158f9ad6f44f0f6be8
  • Information additional 3: 9 day 13
  • Additional information 4: 1abee00edb3fc1158f9ad6f44f0f6be8
  • Read our privacy statement:
  • http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  • Exception code: c000007b

  //
  MessageId: STATUS_INVALID_IMAGE_FORMAT
  //
  MessageText:
  //
  {Bad image}
  HS is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for support.
  //
  #define STATUS_INVALID_IMAGE_FORMAT ((NTSTATUS) 0 xC000007B L)

  Please start the command prompt (cmd.exe) with admin rights [1] and run sfc [2]:
  
  sfc.exe/scannow
  
  He is able to find and repair broken files?

  Best regards
  André

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-run-an-application-once-with-a-full-administrator-access-token [1]
  [2] http://support.microsoft.com/kb/929833
  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Access to the wireless network

  All of a sudden I can't access my wireless network that I use for this computer for 2 years.  My modem works as I have tested.  But it does not find my wireless network.

  Hello

  Power Off (Unplug) your Modem (cable, DSL or other type ISP service you are using) and the router and waiting
  3 minutes and power and then turn it back on. Then, restart the computer.

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon. Use a wire or download the drivers on
  another computer then transfer them using removable media.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for card (NIC) network and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your router wireless and wired - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• I want to add another computer to my existing wireless network

  Ask the installer for my "SSID".  It's been so long that I first set up my network that I don't remember what I used.  How can I find out what my "SSID"?

  The "SSID" is the name of your wireless network. Boulder computer Maven
  Most Microsoft Valuable Professional

• Please HELP Access Connections: No Wireless Network found-> error code 117

  Hello

  Lenovo 3000 N1000 with 1 GB Ram, Win XP SP2, bought in May 2006. WIFI network with WPA - PSK key worked without any problems so far and is still accessible with the PC.

  After the transfer of music through my mobile to my mobile Bluetooth maps network seems to be disconnected. Dial-up connections (AC) or Windows can find any wireless network. Also if I try to configure any LAN, WLAN with Windows I get the message that all network cards have been removed. However I can't find any problem in Device Manager as all parts are shown to work OK.

  That's what I've done so far:

  (1) radio checked turn on--->

  (2) FN + F5--> connection on

  (3) AC uninstalled, downloaded and installed the version more current (5.00 Build 7VCX32WW)

  (4) installed new version wireless driver for Intel (r) PRO/Wireless 3945ABG (version 12.0.0.82)

  Yet, even if I uninstall AC to check that if the WIFI doesn't work at all, Windows gives the message that all network components have been removed.

  Diagnose gives tool the following output:

  'Stack initialization failed wireless error code 117'

  Log file:

  Description: Intel(r) PRO/Wireless 3945ABG Network Connection
  Type: Wireless LAN adapter
  DriverVersion: 10. 5 1. 59---> why is the older version of driver?
  

  PNPID: PCI VEN_8086 & DEV_4227 & SUBSYS_10118086
  SupplicantVersion: AEGIS Protocol (IEEE 802. 1 x) v3.5.3.0

  ERROR AcSvc (SYSTEM (Prvlg).1108.4580) [3/9] 11:04:15:703 CAcGolan::GetRadioStateInDriver: Golan API GetRadioState() missing!

  Hope this is enough information for all of you to suggest a solution. That I have seen previous discussions, some of you have had similar problems in the past and could fix it somehow. However, I couldn't find someone with exactly the same problem.

  Thanks a lot in advance for any advice you may have.

  Flo

  Flo, welcome to the forum,

  missing icons in the Windows network connections? Thisthread may have some useful information.

• Problems when using an extension to an existing wireless network wireless

  I recently acquired a Netgear WN2000RPT which is an extension of a network from a router wireless wireless (also serve as DHCP server and Internet gateway). The extender implements a network connection to the router and admits PC connected to the network extenders in a manner transparent acess Internet (through the router). All works well with Vista but not XP wih. My computer XP SP3 laptop works perfectly when connected directly to the router (and I used it in WiFi systems). When connected wired to the Extender, all right. BUT when connected wireless to the dilution, it does not work. Connection established (documented in the PC, as well as in the extension). But during an attempt to access the Internet the Extender loses (documented) IP address of the PC (on the PC is shown no sign of lost contact). NETGEAR is a wellkown provider, but their support is grateful no problems with XP. They claim that the error is in my PC but all the parameters have been proven in the chats and emails, to be correct. Although no no not a network specialist I know that Vista has been a big step forward in stability network adding even layers in the protocols. This could be a possible cause of the problem and, if so, is there an upgrade to XP (or a KB article) that could eliminate this difference?

  Good news and thanks for the comments.

  As far as IPv6 is concerned, a quick way to say should run ipconfig in command prompt window.  If IPv6 is installed, you will see it immediately.
  http://i.technet.Microsoft.com/dynimg/IC195932.gif
  http://www.windowsitpro.com/content/content/97365/figure_03.jpg

  If you want to uninstall IPv6, http://support.microsoft.com/kb/2478747

• T8200: Where physical access to the wireless network adapter

  Hello

  I bought a Tecra 8200. The internal WLAN card does not work. When I activate it with the button on the front of the laptop, nothing happens.
  The card is not recognized by WinXP-> means that it does not appear in Device Manager. It seems that the card is not "under tension".
  However, can someone explain to me how to open Notepad to check if the wiring is correct? I removed all the screws at the bottom of the case, but the keyboard is always aligned with the rest of the laptop, so I can't open it completely.

  Thank you.

  Ralf

  Thanks for the comments...

• Install - not connect to existing wireless

  Hi all

  I have a couple of Airport Express' that I used to just listen to music to use Airplay.    These are the older devices and I hadn't used for a while (been sitting in a drawer for a few years), but decided to allow them to use again.

  I did a reset on each apparatus and connected to my Mac.  Using Airport utility, I connected to the device, but I don't see the option to add to my existing wireless network.  I see that they have updated this app since I modified it used.

  There is an option to "extend" my network, but I don't think that that's what I want, as I'm not a network Airport Express... I want to just listen to music to it.

  Advice on where this option to add an existing wireless network went?

  If your network is provided by another router from Apple, you'll see an option to "extend a network."  Apple assumes that it is what you want to do.

  Go ahead and implement the Express to 'extend '.  Then, if you don't want to do that, you can go back using AirPort Utility and change the settings for the network of 'Extend' Mode to 'register '.  Under 'Join', the AirPort Express will provide additional wireless network coverage.

  If your network is not granted by another router from Apple, go ahead and start the Installer "Wizard", and then click More Options to see the option 'Add '.

  

  The 'Expand' and 'Add' assume that the AirPort Express will use a wireless connection to join the network.

• How to do to add a Windows XP existing home wireless network

  Existing wireless network computer is a Windows Vista laptop and I want to add a Windows XP computer using a flash drive or a CD or?

  Hi fouffana,

  See the article and check if that helps.

  Add a device or computer to a network

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-a-device-or-computer-to-a-network

• mg7720 wireless network name change

  How can I change the name of the printer wireless?

  Hi Rjw1952,

  To connect your PIXMA MG7720 to your wireless network, please follow these steps:

  1. press the button on your MG7720 PIXMA HOME.

  2. slide the screen, and then select LAN settings.

  3. tap on settings WLAN.

  4. click on installation Standard.

  5. a list of detected access points appears.  Select your wireless network.

  6. Enter your wireless network password, and then click OK.

  Your PIXMA MG7720 will now be connected to your network.

  If you continue to have difficulties, please contact our support group by using the following link:

  http://www.USA.Canon.com/Cusa/consumer/standard_display/contact_us_consumer

• Problems of networking - cannot access other computers via network

  Help, please!  About six months ago, I had Internet from Time Warner.  They provided a wireless router.  I set up the network with my desktop and laptop.  Both computers have XP and two of them access to the wireless network.  Everything worked well.  I was able to print with the laptop through the desktop computer.  I could also access files shared from one to the other.  One day it just stopped working.  I'm guessing after a windows update.  In any case I spent a LOT of time to sift through here looking for answers.  One thing I discovered is there is a lot of those who are experiencing the same thing, but nobody seems to have an answer to the problem.  I found an article that told me to increase the IRP stack size.  I tried and it worked for a few days and then it is right to give me this message, "you might not have permission to use this network resource.  Contact the administrator of this server to find out if you have access permission.  I'm about to lose my mind.  I don't understand how he could have worked for two months and then stops.  The only firewall I run on each one is Windows.  Help, please!

  Jack,

  After typing this long email discuss my problem and I did some internet research and found this post that said they have solved the problem.  He said ' I solved the problem by adding the "Protocol of Transport compatible NWLink IPX/SPX/NetBIOS" to my list of properties of network on every computer on my network.»  I tried it and it worked.  Only problem I've noticed so far is that it takes time to move a folder to.  To back up a folder, he thinks for a minute before moving.  Any thoughts?

  Jerry

• Pavilion p6020a wireless network card

  I was bequeathed a Pavilion p6020a under Vista Home Premium.  The family of the deceased could not find any documentation, or an installation CD.

  The label on the side includes an indicator and the statement 'surfing the web with built in wireless b/g networks.  I have to attach any device such as a receiver to allow the PC to access my existing wireless router, or one such device is already built?  The label implies it is already there, but the installation sheet suggests otherwise.

  I'm definitely no expert and approaching my 75th year, unlikely to become one.

  You are the very welcome.

  You don't need to buy anything, if you already have a wireless router.

  If your router is broadcasting its SSID, you would connect the p6020a to your network wirelessly in the exact same way you did for any laptop that you have connected.

  There should be a wireless icon on the lower right side of the taskbar, and when you mouse over it should be wireless connections are available.

  Click the wireless network icon and select your router from the list, enter the security code and your PC should connect to the internet.

  Please see this link for more information.

  http://support.Microsoft.com/kb/928429

• Problem trying to understand HP Laserjet CP1518n on wireless network

  Hello

  I tried to understand meanings to the laserjet CP1518n on my existing wireless network.  The wireless network I set up is via an Apple Time Capsule.  I tried to connect her pinter directly to the router wireless via either the USB port or ethernet ports (CAT5 LAN cable), but on both occasions, the printer does not also appear online for me select the printer.

  I wonder if there is something I should do outside of what I already did above.

  I use a MacBook Pro with IntelCore 2 Duo.

  Thank you

  Bigberd

  BUTTON!  Master, I see the light!  Thanks a lot for your patience & perseverance!