A point of view composer for 2 HA/DRS-Cluster or 2 data centers?

Similar Questions

• Points of view application for Smartphones blackBerry "BOLD" on all the time

  Hi gurus. Is it right to let the "BOLD" on its charger when running (to use the clock)?

  Absolutely perfect.

  I leave normally mine on the charger all night during sleep with the clock display (and all of the alarm).

• Add hosts with existing virtual machines for 'Greenfield' active DRS Cluster

  I'm currently involved in a project for the hypervisor 5.5 and vCenter. Existing are 2 physical servers with redundant everything and 8 SAS hot swap hard drive bays. Initially, 8 bays only 4 have been populated with hard drives. Hard disks have been removed, ESXi 5.0 has been loaded, 4 virtual machines created on each server and all lived happily ever after.

  Now, I would like to upgrade these servers to 5.5... as follows:

  I filled the remaining 4 bays on each server with some hard disks and created a second strip of sufficient capacity (twice the capacity of the 4 original disks). I'm stop servers, past the stripe for starting a new band of readers and installed ESXi 5.5 on the new band. The old Strip also remains in tact, so that I can start to ESXi 5.0, if I set to boot from the original soundtrack or boot to ESXi 5.5 if I boot to the new band (two operating systems starts very well, are properly networked, configured vCenter, etc.).

  When booting in 5.5, he sees his own, new band and is also the soundtrack which is listed as a second data store attached (I think actually I want to make possible migration of the simple VM from the old to the new data store), both are disk space of LSI, Non - SSD, Type VFMS5.

  Panic sets in when I start both computers in 5.5 and the time comes to add 5.5 hosts in a cluster (I also want to test the vStorage DRS and HA) and I've reached the setting of the, "choose Resource Pool." I'm scared to death that choose the first option, "all of the virtual machines in this updated host in the cluster resource pool root. Pools of resources currently present on the host computer will be deleted. "will mean not only a reformatting of the new band which I would like to add to the cluster, but also the still attached old band that includes the data that I want to keep. I don't want to lose data or virtual machines on the soundtrack, but to migrate them in a cluster of 2 servers ESXi 5.5. I was really hoping to migrate data to new tapes on new hosts and then re - purpose boards 2 original (on both computers) as a third table vStorage.

  Issues related to the:

  1. If I choose the option "put all the virtual machines from the host in the pool of resources of the root cluster. Pools of resources currently present on the host computer will be deleted. "with all the drives connected, all my data will be lost?

  2. If I pull the 4 original disks (5.0) and use the option 'put all virtual machines from the host in the pool of resources of the root cluster. Pools of resources currently present on the host computer will be deleted. "that with the new arrays connected (5.5) and then reconnect the old paintings after that the hosts are added to the cluster, will be only the re added still get sucked into the tables and data deleted?

  3. choose the second option, "create a new resource pool for virtual machines from the host and resource pools. This preserves hierarchy to pool resources in. the host' a safe option? If this option works, no matter if I have my original array attached when you add hosts to the cluster?

  Last point: by reading all the documents I found it seems strongly suggested to set up guests who have not a deployed virtual machines, that's why I'm going to great efforts to try to keep the new hosts as empty as possible and with 1 port base networking while waiting to complete the configuration. Does it matter if I migrate virtual machines or add them as guests to the ESXi 5.5 before or after I have add hosts to the cluster?

  Any ideas or help would be greatly appreciated.

  I'd go with option C.

  VSAN I would agree has some stupid requirements, but that they were aiming for is almost class company SAN at a decent price by using the SSD as caching tables, but as you said if you don't need not good I would continue to go with a NAS NFS solution.

• Error VDM with View Composer "View Composer is not available for this EGG."

  Even after installing View dial on my VC and configure the database according to the Administrator's Guide, I get this message when I click on the button "check to see composer compatibility.  I have the 'view composer' service on the Victoria Cross started and running.  I can't find anything on the web that makes reference to this message.  Thoughts anyone?  Thank you.

  

  Shane,

  Do you use the Virtual Infrastructure 3.5 U3? This version is required by the composer of the view - see the Administrator's guide, at the bottom of page 15.

• View composer database damaged 12.4 in iTunes

  Since the update to iTunes 12.4 songs returned using the composer search are more evil still, I go through the alphabet.

  If I activate the display of composer, everything goes fine until half of the "B" s but when I choose to Brahms, the returned list includes some composed by Brandon Flowers. Then things get more offset lower in the list that I will. The end of the alphabet, the last 8 composers produce no return at all regarding the album artwork, but if I click the button reading next to name of the composer iTunes stops working and closes. Course, it is not happened before the upgrade. I have a lot of classical music in my collection to find very practical composer search. My library amounts to about 217 GB, 13 000 songs (including many encoded by using lossless). Under iTunes 8.1 for Windows on an HP laptop

  12.4 iTunes seems to have no end of bugs.

  I almost never use this point of view, but as you will find out that. I've not isolated exactly where it is out of step again, but seeing one of the pieces of Right Said Fred listed under Kander & Ebb was a surprise!

  TT2

• Impossible to mount the persistent drive - trying to deploy the first pool of offices and do not. -View composer agent initialization failed

  Hi all

  Complete errors:

  Discover the State of the agent (22) composer initialization error: cannot mount the persistent drive. Please check the VM parent if an existing drive uses the same drive letter. (expected 0 seconds)

  State matching: matching...

  By:xxx.xxx.xxx.local set up

  Attempted theft by:

  Error commissioning took place for Machine xxx: View Composer agent initialization failed

  I am currently deployment of VMWare view for the first time in a test environment and have hit a problem I have not been able to get around despite several searches on google and trial and error.

  Hoping that someone here could suggest something.

  View the VMWare versions are all 6.0.1.

  vCenter is on a device.

  VMWare view connection manager is on a 2012 R2 VM server.

  VMWare view dial is on a separate server 2012 R2 VM.

  I have a 2012 SQL on a separate server 2012 R2 VM Server installation.

  SQL databases have been set up for the composer to be able to reach it, it uses ODBC 64-bit via SQL Server Native Client 11.0.

  I tried troubleshooting by exchanging 32-bit, but this is not connected, it seems so 64 bit is correct.

  I have a windows 7 64-bit Enterprise Edition VM under my Golden image. There are VMWare tools on it and the VMWare agent on it.

  The virtual ipconfig/release performed top machine, he was then stop and a snapshot taken as my source.

  The problem is that when I go to deploy a pool of offices, I get the above error.

  If I connect to the VM created via vCenter readers persistent and temporary show very well.

  Based on the error, I tried different settings such as change the path for the reader of DVD VMs of D: to Z:, spread unique persistence and the temporary disks on multiple data-stores or data stores and even remove the drive of DVD of VMs completely. I have also looked at newspapers under composer view but find nothing to explain the behavior.

  SQL Server seems to work for configuration through the error logs and virtual machines are created and added to AD as expected.

  I must point out that the virtual machines are as linked clones.

  Can anyone offer a clue as to the cause or something, I can check it please, did everything I can think and Googling the error does not come to the top with something useful so far.

  Thank you

  IF you use an Agent 6.0.2 Please downgrade 6.0.1 agent and let me know the results

• View Composer or View Manager need most of the CPU and network?

  Hello

  I intend to start experimenting with the customers see 6-8 to find the notion of vView...

  I installed View Manager to a virtual machine: (x 64) svr Win2008 connected to the same subnet that all thin clients in the view are connected.  My VCenter server where I installed View Composer works to a dedicated old (physical) (x 64) svr Win2008 connected to the view Manager / computer thinclient subnet via a 100 Mbps firewall.

  More traffic view CPU and network for thin clients would be the composer or Manager?  I wonder if the 100 Mbps "bottleneck" and the former composer server hardware will be a problem.  Or it's okay with such a low customer account...?

  Second, the View Composer installer asked a database connection.  He would be allowed to use the same (SQL Express?) as the Installer installed VCenter?  If Yes, where can I find information about how to create a composer under SQL Express database...?

  Thanks for the comments on these issues

  Best regards

  Tor

  Customers of 40-50 reviews could be possible in SQL express without a lot of questions. Go through your response, it is clear that the subnet22 is the network that will be using the network more than any other w.r.t. view desktops. (and your assumption is right).

  The network configuration in the ESX to connect virtual machines to the Subnet22, this is called VMNetwork

  User name by default and passoword for the SQLExpress will be the account used to connect and install the server vCenter in windows machine (it is windows authentication). You can connect as below.

  • Download and install SQL Management Studio from the microsoft Web site in the virtual center host operating system
  • Open SQL studio, then click on connect, the server name is "localhost\SQLEXP_VIM" and select windows authentication
  • This way you can manage SQL express and create the new database.
  • You can also view the DSN for vcenter server which automatically created during installation

  Most of the VirtualCener servers are VMs I believe, but according to my understanding, both are very popular.

  Defenitly peacekeeping vCenter in VM have a lot of benefits and felxibilities.

  Thank you

  Siva

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

• No server found view composer

  I think that the solution to the problem can be simple, but I'm not find clue in the documentation I see.

  I'll put up a view view environment 4.5. I have a vCenter server, SQL Server on the same environment as View Composer and Connection manager. There are no firewall in the environment or enabled on the operating system of these machines. The View Composer and the connection manager are on the same VM.

  Problem: When I try to add the vcenter Server, it throws the following error "no composer view server Found. Either a bad port has been entered or a network connection error occurred", as shown in figure below.

  

  My research in VMTN and Internet, has pointed out to me that the problem may be with configurations of network or administrator rights, but as mentioned before all these machines are on the same VLAN and there is no firewall. Also I use a single user from the administrator of domain for all these machines., (this is a laboratory environment, this is why we can afford to do).

  Your suggestions are very appreciated.

  Thank you.

  Kumaran

  The composer of the view must be installed on the vCenter server and not on the display connection server.

• View composer 2.5 installation problem

  We did a separate server for our oracle 11 and the other for our vCenter. (the two server are 64-bit win2008 SP2 Enterprise)

  So first of all, we made the DB for the vcenter server and installed the server vcenter without problems.

  Then we made a second database for the composer of the view and try to install the composer 2.5 to vcenter server. but when you get to the screen to enter the DB options, we're stuck.    

  The ODBC tests succeeded.

  In the vmware-sviconfig, we see that when it occurres:

  

  This image shows the databases on the Server DB

  

  There is someone who has had the same problem and found a solution or someone who can help me?

  TNX

  Sorry for the multiple posts, so come back to my first posting on the bug in ODBC and .NET, Oracle has brought out a patch for the Windows Client.  The patch number is 9966926.  (connection can be made using the opatch utility that is included with the installation).

  One thing to note is when I was doing my patch, I fails me on update oci.dll.  This happened again after that judgment of the Oracle base services.  When I ran process monitor on my host, I have determined that these services were also hung in the DLL:

  Application system COM +.

  Distributed Transaction Coordinator

  VMWare tools service (this is because I'm running my Virtual Center on a virtual machine)

  Once I confirmed that nothing had a hook in this DLL, the patch was able to successfully apply.  After a reboot, I ran the installer to View Composer and installed.  At this point, I didn't run any test extended beyond installation, but its progression without a doubt.

• Cannot enable View Composer

  I installed View Composer on my Virtual Center Server, but when I go in the settings of the virtual composer and try to, I get the following error:

  The composer of View Server does not respond, or the user name or password entered is incorrect. The View Composer requires that the username must be complete with the domain name (domain\administrator). Please contact the administrator.

  Also when I try to start the service View Composer, I get the following error codes in the application event log:

  Service cannot be started. VMware.Sim.CommonLib.Exception.SimDbConnectionException: [ODBC SQL Server driver] [SQL Server] Login failed for user 'SERVERNAME\ID '. -& gt; NHibernate.ADOException: failed to open the connection - & gt; System.Data.Odbc.OdbcException: ERROR [ODBC SQL Server driver] [SQL Server] Login failed for user 'SERVERNAME\ID '.

  ERROR [ODBC SQL Server driver] [SQL Server] Login failed for user 'SERVERNAME\ID '.

  at System.Data.Odbc.OdbcConnection.HandleError (OdbcHandle hrHandle, RetCode retcode)

  to System.Data.Odbc.OdbcConnectionHandle... ctor (OdbcConnection connection, s OdbcConnectionString, OdbcEnvironmentHandle environmentHandle)

  at System.Data.Odbc.OdbcConnectionFactory.CreateConnection (DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject)

  at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection (DbConnection owningConnection, DbConnectionPoolGroup poolGroup)

  to System.Data.ProviderBase.DbConnecti...

  I have a database created on my SQL Server and I created a DSN pointing to the DB but I don't know if I'm using the correct connection type. I use authentication with Windows NT using the network login ID.

  Is it a kind of identity that needs rights to DB on the side of SQL Server I have to use when creating my DSN.

  Two of these errors have also and relevance to each other?

  Looks like you may send incorrect server name.

  I'll try to use sql instead of NT authentication, unless you really need to use NT authentication. do you have him allow mssql and choose the authentication type on the ODBC connection too.  If you decide to try to follow my advice, let me know if it solves the problem.

• Look an OSX 'point of view to portrait"not"view of landscape ".

  My Air 11 '' has a screen that is up 5 5/8 "and 10" wide.

  This is not a screen ideal for reading a document, if you are looking to him normally, but if I had to rotate and read the book with the WIDTH being 5 5/8 "and 10" HEIGHT, would be perfect. of course, I have to hold the computer in this way while I was reading, but I would try this.

  is there such a feature that would allow me to test this out. interested in native or third-party options.

  Thank you

  Look an OSX 'point of view to portrait"not"view of landscape ".

  If you use only the MacBook Air screen it's doable, but it's hard to return to the normal display.

  Try this (works) in El Capitan:

  1. Launch of system in the Apple  menu preferences.
  2. Command-Option-click on the "View" icon
  3. On the right side of the display preferences, search for the "Rotation" menu dropdown visible again.

  

• Display the text and the image on the camera's point of view using blackberry OS 5

  Hello

  I'm creating an application, which contains the label and the image on the camera's point of view. When I start the camera, that time itself the label should display on the top and the image should appear on background. I tried. but I got only for OS 7.

  http://docs.BlackBerry.com/en/developers/deliverables/36449/Display_text_on_live_camera_feed_LabelFi...

  But I need the OS 5. Is this possible in OS 5? Please give me an idea.

  Thanks in advance.

  That is right. Drawing on the display window is only available from 7 OS.

• Model point of view

  Hi all

  I was hoping someone could point me in the right direction.

  I'm trying to reflect an image that a marketing company, provides us with (we want to try to do in the House to cut costs).

  However I'm having trouble trying to match the very prospect of the bike shed. I have created the model in Autodesk Inventor (essentially a square glass panels with steel cage) but when I imported this model into Photoshop and place on the right Image I can't seem to get the same substantive point of view. You can see both the floor and the ceiling of the shelter as well as the left side seems to be bigger than the right side.

  How is this achieved? I tried to play with the camera 3D for hours but had no luck.

  

  Are the steps I took to try to get a 3D model to adapt

  1 ensure the multipiece aligns with the multi-room image so that the vanishing point is - by using the controls of the orbit

  2. set the camera FOV must match that of the image - if you know the equivalent of 35 mm from the lens used to take the picture, you can type this in the current view - properties as a starting point

  3 adjust the angle of the camera, using the controls pan and dolly

  I suspect you did 1 and 3 to the death.  Did you watch 2.

  Dave

• How to call a display object with the criteria of the different point of view in each line an ADF BC table (Urgent)

  Hello world

  I use 11.1.1.7 version of Jdeveloper. I have a table adf BC. I need to call another ADF BC table inside the table. I need get the questionId from each row in the main table and fix the questionId as a point of view of the criteria drop inside the main table. I use to execute with parameter but always get the id of the last row question and criteria of this id as a point of view to each row of the table. How can I do this? 

  < af:table value = "#{bindings." AttachmentYesNoVO11.collectionModel}.

  var = "row" rows = "#{bindings." AttachmentYesNoVO11.rangeSize}.

  emptyText = "#{bindings." AttachmentYesNoVO11.viewable? "{'No data to display.': 'Access Denied.'}".

  fetchSize = "#{bindings." AttachmentYesNoVO11.rangeSize}.

  rowBandingInterval = "0" id = "t2".

  "partialTriggers =": cb4: cb3 ".

  styleClass = "AFStretchWidth" inlineStyle = "height: auto;"

  width = "1250" >

  < af:column sortProperty = "#{bindings." AttachmentYesNoVO11.hints.Question.name}.

  sortable = "false".

  headerText = "#{bindings." AttachmentYesNoVO11.hints.Question.label}.

  ID = "c10" width = "300" >

  < af:inputText value = "#{row.bindings.Question.inputValue} '"

  label = "#{bindings." AttachmentYesNoVO11.hints.Question.label}.

  required = "#{bindings." AttachmentYesNoVO11.hints.Question.mandatory}.

  columns = "#{bindings." AttachmentYesNoVO11.hints.Question.displayWidth}.

  maximumLength = "#{bindings." AttachmentYesNoVO11.hints.Question.precision}.

  shortDesc = "#{bindings." AttachmentYesNoVO11.hints.Question.tooltip}.

  ID = "it1" lines = '8' readOnly = "true" contentStyle = "width: 330px; "margin: 10px" >

  < f: validator binding="#{row.bindings.Question.validator}"/ >

  < / af:inputText >

  < / af:column >

  < af:column headerText = "#{bindings." AttachmentYesNoVO11.hints.ApplicationId.label}.

  ID = "c1" width = "300" >

  < af:table value = "#{bindings." AttachmentVO1.collectionModel}.

  var = "row" rows = "#{bindings." AttachmentVO1.rangeSize}.

  emptyText = "#{bindings." AttachmentVO1.viewable? "{'No data to display.': 'Access Denied.'}".

  fetchSize = "#{bindings." AttachmentVO1.rangeSize}.

  selectionListener = "#{bindings." AttachmentVO1.collectionModel.makeCurrent}.

  rowSelection = 'single '.

  Binding = "#{uploadDownloadBean.downloadTable} '"

  rowBandingInterval = "0" id = "t1".

  partialTriggers =': cb5: cb6: cb7: cb10 ">"

  < af:column id = 'c12' width = '0 '.

  headerText = "Download File" >

  < af:commandButton text = "#{row.bindings.FileName.inputValue}" id = "cb23" > "

  < af:fileDownloadActionListener

  filename = "#{row." Bindings.FileName.inputValue}.

  Method = "#{uploadDownloadBean.downloadFile} '"

  contentType='"#{row.bindings.MimeType.inputValue}"'/ >

  < / af:commandButton >

  < / af:column >

  < / af:table >

  < / af:table >

  User, because the two tables have a relationship, we call matter detail relationship, you can use a link view defining the relationship, and the framework will be the selection detail for you automatically.

  The next thing is that you can not put a table in a column of a table. This is not supported by the table component. You can use a picture of the tree for this, or tables cascading as I show in JDeveloper 11.1.2.1: cascade Tables | JDev & ADF Goodies

  Timo

• Problem with certificate on View Composer

  Hello

  I'll try to explain my problem as well as possible.

  I upgraded my server from 5.2 to 6.2 view composer. And I would like to replace the default certificate with my own build by my internal CA (on our domain controller).

  I created a requet.inf found here: VMware KB: using Microsoft Certreq to generate signed SSL certificates in VMware View Horizon

  And replace the CN, OR O, etc. by my information. Here is the content:

  - request.inf-
  [Version]
  
  Signature = $Windows NT$
  
  [NewRequest]
  
  Subject = "CN =View_Server_FQDN, OR =Organizational_Unit_Name, O =OrganizationName, L =City_Name, S =State_Name, C =Country_Name"; ". replace the attributes of this line with the help of example below
  KeySpec = 1
  KeyLength = 2048
  ; Can be 2048, 4096, 8192, or 16384.
  ; Larger key sizes are more secure, but have
  ; a greater impact on performance.
  Exportable = TRUE
  FriendlyName = vdm
  MachineKeySet = TRUE
  SMIME = False
  PrivateKeyArchive = FALSE
  UserProtected = FALSE
  UseExistingKeySet = FALSE
  ProviderName = Microsoft RSA SChannel Cryptographic Provider
  ProviderType = 12
  RequestType = PKCS10
  KeyUsage = 0xa0
  
  [EnhancedKeyUsageExtension]
  
  OID=1.3.6.1.5.5.7.3.1 ; This is for server authentication
  
  [RequestAttributes]
  
  ; SAN = dns =FQDN_you_require& dns =other_FQDN_you_require
  ;-----------------------------------------------

  
  

  After I generated the CSR with the following command: certreq-new request.inf certreq.txt

  
  

  After that I generated the certificate with our CA in DER64.

  
  

  In the MMC on the composer of server I import the certificate. Always go to the right.

  
  

  And the last thing is to replace the default certificate with the IVR command: SviConfig ReplaceCertificate

  
  

  It's done. I restart the composer server go to the dashboard to see the flag. But I got a redflag about the composer with the following message: the server certificate does not match the url

  
  

  I searched this message on Google and the error appear to be in the "NC", I checked the synthax and the name of the server (FQDN) are correctly write. I also see that we can use SAN (alternative name of the object).

  
  

  But I still got the same error.

  
  

  
  

  Anyone has an idea about this?

  
  

  Best regards
  

  Excuses that became automatic registered please ignore previous comment. Good now back instead on certificates of composer does not work as expected. Please share the result at the bottom of the step

  If you use the utility replace sviconfig from there to return to default certificates the certificate error disappears?