No server found view composer

Similar Questions

• Installing the Server VMware View Composer

  Hi team,

  Need help,

  I'm trying to install VMware View Composer server but I can not create my ODBC connector, can you pls help me to do this task.

  I get this error message

  

  (1) to connect to the database and the new query

  use 'ViewcomposerDbName '.

  exec Sp_changedbowner 'viewservice.

  (2) the right of the database and allow the sql and windows Authetication

  See the screenshot

  (3) lFailing Stil? Go to, click on Sql Server for management (on the left side) > Sql Server Logs > current view them if it connects

  It should be

• Connection error to the login server to view while adding the view composer

  Hello

  I added VM Vcenter server successfully to the server connection in my opinion. now, I'm trying to add server offline view composer to the login server setting. I get the error message

  Unable to connect to view the composer.

  Thanks in advance for any help

  Hi, could you please download the log files. Check the link mentioned below, it will help you.

  VMware View 5.2 Documentation Library

• View Composer 4 build 21930 - database is not found during installation

  New features of vSphere and views. Test thin DSN Connecting to a SQL Server 2008 2005 accounts.

  vCenter DB OK. Update DB Manager OK - on the same SQL server server. Unable to connect to complete installation View Composer.

  *'The database cannot be found.or impossible to establish a connection. Check the DSN name to ensure that it is properly registered. » *

  This is the case.

  vCenter runs on Windows 2008?

  In this case is not supported.

  See 25 of http://www.vmware.com/pdf/view40_admin_guide.pdf

  André

• Reconstructed View Composer databases, view server connection problems

  I had to go back to a previous snapshot on my SQL database server that was right before I installed the database to View Composer.  Mode to connect to the server, there is a pool for the related clones.  How can I remove the pool?  When I try to delete it, I get an error that I do not remember the hand, but basically it has to do with the fact that see connection to the server could not find the swimming pool in the database.  Any ideas?

  You would need to connect via ADSI Edit.    Check out this KB for instructions on how to remove obsolete work and clones, http://kb.vmware.com/kb/1008658positions.   This should give you an idea on how to connect to the ADAM database and navigate.

• View Composer 4 Build 21930 - database is not found during installation on W2k3 32bits

  Hello!

  I'm trying VMware View.

  I try to install View Composer, but I always get error 'database was not found"when installing.

  vCenter is installed under Windows 2003 Standard SP2 32-bit and use MSSQL 2005 Express (installed by vCenter).

  The database was created in MSSQL, also created by the user.

  ODBC was created, and say that everything is ok.

  I search on google. Everything that I found speaks ODBC to a 64 bit OS.

  Thank you for your help.

  Looking at your screenshot, it seems that you are using a UserDSN not a SystemDSN.  View Composer requires a system DSN.  See if that helps.

• Problem with certificate on View Composer

  Hello

  I'll try to explain my problem as well as possible.

  I upgraded my server from 5.2 to 6.2 view composer. And I would like to replace the default certificate with my own build by my internal CA (on our domain controller).

  I created a requet.inf found here: VMware KB: using Microsoft Certreq to generate signed SSL certificates in VMware View Horizon

  And replace the CN, OR O, etc. by my information. Here is the content:

  - request.inf-
  [Version]
  
  Signature = $Windows NT$
  
  [NewRequest]
  
  Subject = "CN =View_Server_FQDN, OR =Organizational_Unit_Name, O =OrganizationName, L =City_Name, S =State_Name, C =Country_Name"; ". replace the attributes of this line with the help of example below
  KeySpec = 1
  KeyLength = 2048
  ; Can be 2048, 4096, 8192, or 16384.
  ; Larger key sizes are more secure, but have
  ; a greater impact on performance.
  Exportable = TRUE
  FriendlyName = vdm
  MachineKeySet = TRUE
  SMIME = False
  PrivateKeyArchive = FALSE
  UserProtected = FALSE
  UseExistingKeySet = FALSE
  ProviderName = Microsoft RSA SChannel Cryptographic Provider
  ProviderType = 12
  RequestType = PKCS10
  KeyUsage = 0xa0
  
  [EnhancedKeyUsageExtension]
  
  OID=1.3.6.1.5.5.7.3.1 ; This is for server authentication
  
  [RequestAttributes]
  
  ; SAN = dns =FQDN_you_require& dns =other_FQDN_you_require
  ;-----------------------------------------------

  
  

  After I generated the CSR with the following command: certreq-new request.inf certreq.txt

  
  

  After that I generated the certificate with our CA in DER64.

  
  

  In the MMC on the composer of server I import the certificate. Always go to the right.

  
  

  And the last thing is to replace the default certificate with the IVR command: SviConfig ReplaceCertificate

  
  

  It's done. I restart the composer server go to the dashboard to see the flag. But I got a redflag about the composer with the following message: the server certificate does not match the url

  
  

  I searched this message on Google and the error appear to be in the "NC", I checked the synthax and the name of the server (FQDN) are correctly write. I also see that we can use SAN (alternative name of the object).

  
  

  But I still got the same error.

  
  

  
  

  Anyone has an idea about this?

  
  

  Best regards
  

  Excuses that became automatic registered please ignore previous comment. Good now back instead on certificates of composer does not work as expected. Please share the result at the bottom of the step

  If you use the utility replace sviconfig from there to return to default certificates the certificate error disappears?

• Activate the view composer errors

  My setup here is to separate my database of vcenter on its own server, which is a different my vcenter Server vm. When I try to click on "Enable View Composer" I receive a message indicating "none found Server View Composer. You have entered an incorrect port or a network connection error occurred.

  I have installed and configured the composer db on this server and the service is started successfully and can be restarted without any problem.

  Is there a limitation for this work due to the fact that my vcenter Server break a db are disparate?

  The composer software and service must be on the vCenter server.  The database can reside remotely but everything else must be on vCenter.

• View Composer or View Manager need most of the CPU and network?

  Hello

  I intend to start experimenting with the customers see 6-8 to find the notion of vView...

  I installed View Manager to a virtual machine: (x 64) svr Win2008 connected to the same subnet that all thin clients in the view are connected.  My VCenter server where I installed View Composer works to a dedicated old (physical) (x 64) svr Win2008 connected to the view Manager / computer thinclient subnet via a 100 Mbps firewall.

  More traffic view CPU and network for thin clients would be the composer or Manager?  I wonder if the 100 Mbps "bottleneck" and the former composer server hardware will be a problem.  Or it's okay with such a low customer account...?

  Second, the View Composer installer asked a database connection.  He would be allowed to use the same (SQL Express?) as the Installer installed VCenter?  If Yes, where can I find information about how to create a composer under SQL Express database...?

  Thanks for the comments on these issues

  Best regards

  Tor

  Customers of 40-50 reviews could be possible in SQL express without a lot of questions. Go through your response, it is clear that the subnet22 is the network that will be using the network more than any other w.r.t. view desktops. (and your assumption is right).

  The network configuration in the ESX to connect virtual machines to the Subnet22, this is called VMNetwork

  User name by default and passoword for the SQLExpress will be the account used to connect and install the server vCenter in windows machine (it is windows authentication). You can connect as below.

  • Download and install SQL Management Studio from the microsoft Web site in the virtual center host operating system
  • Open SQL studio, then click on connect, the server name is "localhost\SQLEXP_VIM" and select windows authentication
  • This way you can manage SQL express and create the new database.
  • You can also view the DSN for vcenter server which automatically created during installation

  Most of the VirtualCener servers are VMs I believe, but according to my understanding, both are very popular.

  Defenitly peacekeeping vCenter in VM have a lot of benefits and felxibilities.

  Thank you

  Siva

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

• View Composer on vCenter 4.1

  I recently updated my server vCenter 4.1 and I try to install this server view composer.  Not quite sure of the database DSN.  I install a 32-bit DSN on the server and when I go through the installation I get an error.  I do not see the DSN I install and when I try to create one with the istall the error I get is... Setup cannot run the ODBC Administrator: odbcad32.exe.  I'm guessing that the error is because it points to the bitODBC 64 and not 32 bits.  It is a 64-bit server.  Can't seem to get the working capital facility.  Any thoughts?  Thank you.

  Perry

  View composer Server 2.5 is a 64-bit application and requires a 64-bit DSN.

  Please consult the following a full guided tour;

  http://terenceluk.blogspot.com/2010/10/installing-VMWare-view-45-composer.html

  Kind regards

  Paul Kelly

  If you have found this unit or any other useful post, remember to make use of the system of awarding points.

• View composer 2.5 installation problem

  We did a separate server for our oracle 11 and the other for our vCenter. (the two server are 64-bit win2008 SP2 Enterprise)

  So first of all, we made the DB for the vcenter server and installed the server vcenter without problems.

  Then we made a second database for the composer of the view and try to install the composer 2.5 to vcenter server. but when you get to the screen to enter the DB options, we're stuck.    

  The ODBC tests succeeded.

  In the vmware-sviconfig, we see that when it occurres:

  

  This image shows the databases on the Server DB

  

  There is someone who has had the same problem and found a solution or someone who can help me?

  TNX

  Sorry for the multiple posts, so come back to my first posting on the bug in ODBC and .NET, Oracle has brought out a patch for the Windows Client.  The patch number is 9966926.  (connection can be made using the opatch utility that is included with the installation).

  One thing to note is when I was doing my patch, I fails me on update oci.dll.  This happened again after that judgment of the Oracle base services.  When I ran process monitor on my host, I have determined that these services were also hung in the DLL:

  Application system COM +.

  Distributed Transaction Coordinator

  VMWare tools service (this is because I'm running my Virtual Center on a virtual machine)

  Once I confirmed that nothing had a hook in this DLL, the patch was able to successfully apply.  After a reboot, I ran the installer to View Composer and installed.  At this point, I didn't run any test extended beyond installation, but its progression without a doubt.

• View Composer fails

  Hello

  I have a demo of 6 reviews running and it was OK, but today I noticed that the view composer is marked in red. I tried to restart the composer, connection and server vcenter, but same problem. When I click on the link View Composer to check I get the following message

  

  I tried to delete the role of composer of the server and reinstalled then I generated a new self-signed certificate. But im not able to verify that the new certificate so I changed back to the old certificate and then im stuck.

  Please advice, did not have any special troubleshooting on the composer before SQL connection works very well view composer SQL client and the SQL Server, im using the SA user.

  Thanks for the reply

  Concerning

  Andreas

  My mistake, expiry of administrator password, that was the problem

• Impossible to mount the persistent drive - trying to deploy the first pool of offices and do not. -View composer agent initialization failed

  Hi all

  Complete errors:

  Discover the State of the agent (22) composer initialization error: cannot mount the persistent drive. Please check the VM parent if an existing drive uses the same drive letter. (expected 0 seconds)

  State matching: matching...

  By:xxx.xxx.xxx.local set up

  Attempted theft by:

  Error commissioning took place for Machine xxx: View Composer agent initialization failed

  I am currently deployment of VMWare view for the first time in a test environment and have hit a problem I have not been able to get around despite several searches on google and trial and error.

  Hoping that someone here could suggest something.

  View the VMWare versions are all 6.0.1.

  vCenter is on a device.

  VMWare view connection manager is on a 2012 R2 VM server.

  VMWare view dial is on a separate server 2012 R2 VM.

  I have a 2012 SQL on a separate server 2012 R2 VM Server installation.

  SQL databases have been set up for the composer to be able to reach it, it uses ODBC 64-bit via SQL Server Native Client 11.0.

  I tried troubleshooting by exchanging 32-bit, but this is not connected, it seems so 64 bit is correct.

  I have a windows 7 64-bit Enterprise Edition VM under my Golden image. There are VMWare tools on it and the VMWare agent on it.

  The virtual ipconfig/release performed top machine, he was then stop and a snapshot taken as my source.

  The problem is that when I go to deploy a pool of offices, I get the above error.

  If I connect to the VM created via vCenter readers persistent and temporary show very well.

  Based on the error, I tried different settings such as change the path for the reader of DVD VMs of D: to Z:, spread unique persistence and the temporary disks on multiple data-stores or data stores and even remove the drive of DVD of VMs completely. I have also looked at newspapers under composer view but find nothing to explain the behavior.

  SQL Server seems to work for configuration through the error logs and virtual machines are created and added to AD as expected.

  I must point out that the virtual machines are as linked clones.

  Can anyone offer a clue as to the cause or something, I can check it please, did everything I can think and Googling the error does not come to the top with something useful so far.

  Thank you

  IF you use an Agent 6.0.2 Please downgrade 6.0.1 agent and let me know the results

• simultaneous operations of view composer max can be changed to number

  Say I want to change the operation of composer max view simultaneous as 100, it would be possible as long as I have the resources to manage all these simultaneous operations? Would break the composer?

  kappyninewood -

  Please see my writing here on this topic:

  Provisioning operations (simultaneous)

  VMware recommends you set this to 20 or higher, not to exceed 50. VMware engineering have conducted tests up to 50, however, the clients must experiment and do additional tests of 20 upwards.

  Power on (simultaneous) operations

  VMware recommends this set to 32 or higher, not to exceed 50.  VMware engineering have conducted tests up to 50, however, the clients must experiment and do some additional tests of 32 upward.

  Guard/Note layout: If vCenter Server's resources, increases in simultaneous deployment operations could potential impose constraints and have opposite results increased, but decreased provisioning time. Additional testing is noticed and should be conducted.

  VMware View environments are structured to scale, therefore, load thresholds Sever and vCenter server connection view should be monitored and refined for better performance.

  Let us know if that helps.

• View Composer unable to connect to vCenter

  I have a strange bug here. When I try to configure the settings of composer view View Manager I get error (403) Fodbidden. I checked the security event on the vCenter server log and there are audits of chess with the following text:

  An account could not connect.

  Object:
  Security ID: SYSTEM
  Account name: VCENTER$
  Account domain: mydomain
  Logon ID: 0x3e7

  Logon type: 8

  The account to which the connection failed:
  Security ID: NULL SID
  Account name: administrator
  Account domain:

  Failure information:
  Reason for the failure: unknown username or bad password.
  Status: 0xc000006d
  Void / status: 0xc000006a

  Any credentials, I put in the view composer settings it always tries to connect with the name of the account: VCENTER$

  My configuration: View 5.0, vCenter 5.0, see Composer 2.7

  Reason for the failure: unknown username or bad password.

  Make sure that you type it correctly?

  You can try to use the specific admin account to view and make sure that it is an Admin (not necc. only local administrator) on the machine?