A question about conservation of a number

Similar Questions

• Questions about adding a Skype number

  First timer here, here are my questions, I live in Thailand, former U.S. citizen, have for years had major problems with government agencies to reach me by phone. My billing address is in CA, my verified phone number is thai. I believe that with a Skype CA phone number I can eliminate these problems, correct? As the Government agencies and US automated banking systems cannot recognize a 11 digit number.

  OK, so I did not have a first core of Galaxy attached to any diet, talk with a slot for sim card available. My intention is to buy a prepay sim for the available location local, and then add a Skype number. This Skype number wouldn't be usable wifi connected. A one year subscription is $52.25, but the site says nothing about other calling some how fees, or I've missed?

  With the second sim with a Skype number, dedicated to the United States calls only, and I was able to differentiate between the two by which the sim was used to receive the call. I receive a message if a call was made for me if it is not connected to wifi?

  Could I have the call transferred to my Thai number, if I were to buy call forwarding also?

  I intend to wait until I have answers from the community before I do anything.

  Thanks in advance for those who add their comments.

  Hi, what you're trying to do is possible in principle, but you do not add the number of Skype to a SIM.

  What happens, is that you install the Skype app on Google Store on your base premium Galaxy then receive calls and outgoing calls via the Skype in wifi or mobile data, if you add a local SIM card.

  Check Skype calling subscriptions and distribution rates to the United States and the Thailand (subscriptions especially if you make a lot of calls or transfer calls to a number of Thai). If you buy a subscription or even 2 subscriptions (1 USA and 1 Thai) then you get a 50% discount when you buy a Skype number for 12 months, which is a good deal.

  The application on your Galaxy will inform you of all the missed calls. I suggest you only install Skype on a PC too to see the full selection of purchase options in Tools/Options. You must configure the voicemail here and select this option to allow anyone to call your Skype number. Spend some time looking at all the options that are available to you.

  You can transfer your Skype CA number to a number of Thai, if you wish and have a subscription or a credit to pay for it.

  Perhaps start by installing Skype on your base premium Galaxy from the game store, sign in with your account and take a look at all the parameters available on the app. Setting most are in the app now except setting up voicemail that can be made on the program Skype on a PC.

• Question about on VM consolidation number and percentage of CPU Ready

  Hi people,

  I'm trying to consolidate as many VM in simple ESXi servers on HP on AMD Opteron blades with 32 CPU available logic (based on the number on the vSphere console)

  Can anyone here please share some thoughts and comments about what is the best indication to avoid adding more VMS that ESXi hosts can treat?

  I must ensure that the number of vCPU altogether exceed is not 32 logic processor available, or it can be more than that?

  Running a script powershell LucD to collect CPU ready percentage shows that some virtual machines had prepared more than 10% CPU (for the most part 2 x vCPU) up to 22% (this one with 8 x vCPU)

  Hello

  I had the same situation on HP Blade and DL serer with two different CPU vendors.

  Intel CPU based on my experiences, has better performance compared to AMD CPU when the CPU is too committed on ESXi server.

  I have HP BL460c G6 and G7 on one of our sites, the server has 12 physical and 24 cores logic core.

  I assigned four cores to each customers (to fix the voice problem) and virtual machines are working properly, RDY CPU is less than 5% in general and there is no performance problem.

  Each blade server hosts 20 VMs and total virtual cores are 80 cores, so we attribute 1:3 (Physics: virtual) core.

  On the other hand, I DL585 G7 on our sites some server has 64 physical cores (4 Sockets and each catches have 16 cores). Servers host 50 active VMs usually but RDY CPU is greater than 10% or 7% on them. Total virtual cores are 200 and CPU assignment ratio is 3.

  I think that, if you want to optimize performance on AMD CPU, 1:1 or 1:2 CPU assignment report is the best choice.

• PLSQL question about printing the line number when an exception occurs

  Hi all
  
  My database: oracle 10G
  
  Here's my question:
  
  Explain my problem using a simple procedure, such as:
  
  create or replace procedure p_hello_world
  as
  [a few variables declared]
  Start
  [a lot of code here]
  exception
  while others
  dbms_output.put_line ('Exception occurred for the p_hello_world procedure');
  dbms_output.put_line ('sqlerrm' |) SQLERRM);
  dbms_output.put_line ('sqlcode' |) SQLCODE);
  -Suppose I want to print the line number where the exception occurred, pourrais I do, if so please help me with this
  end;
  
  Now it's the same construction that I use for my use, I have a comment in the above exception block where I need to print the line number where the exception is produced, now since I'm on so that any other article, my procedure is always succeed even if an exception occurs, but using this technique I am not able to quickly debug my code but print line number would help me a lot Please help me with this as its rescue me great distress.
  
  Concerning
  Rahul

  Try something like:

  dbms_output.put_line(sqlerrm || chr(10) || dbms_utility.format_error_backtrace);
  

  (Hoping that this is a simplified example and you are not actually using dbms_output as an exception handler...)

• Re: Question about the warranty contract number / decompressor "Vid.iv32."

  Hello

  1. I have this message when I try to play a dvd: video not available, cannot find decompressor "Vid.iv32."

  2. in the extended warranty, I wonder for "Contract number", where I get this.

  (1) possibly, you use a DVD player software that doesn t supports the video file or you have not installed a necessary codex.

  (2) use this page www.toshiba-tro.de/unitdetails/

  Also check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=117176𜦸

• Question about the warranty contract number

  I've been recording my toshiba L10 and the basic warranty, but I have not received agree security number to save extention of warranty.
  What should I do to receive the warranty contract number?

  Hello

  AFAIK that should be given the right address if you save your standard warranty. I guess that you will receive an email from Toshiba with good security agreement number. It takes a few times. But if you want, you can ask Toshiba authorized service provider for this number.

  Check this box:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=000000147b

  Good bye

• Question about the BOROUGH a number to the nearest quarter

  Hi all

  Please forgive me if I am not posting this at the appropriate place, but I do not know what area he could enter (script, Javascript, Designer...) and the Acrobat Scripting forum seemed as good one place as any.

  I have the field that allows a user to enter a number with 2 decimal places 2-digit. (i.e. 12.30 or 9.78 until 24.00.) This field corresponds to the hours in a day). What I would like is to "round" the quarter of an hour. As an example, if a person enters:

  22.15 - the field would round up to 22.25

  9.78 - the field would round down to 9.75

  12.10 - the field would round down to 12:00

  .15 - would round up a.25

  .96 - would turn to 1.00

  .01 a.24 - would round up a.25

  Essentially, any number that they take place in this field (until 24:00) would be around in an appropriate manner.

  I looked at the ROUNDING FormCalc function and DATE / hour, but it doesn't look like one of those that would allow me to do what I have to do. I guess, that it should be in JavaScript, but yet again, I'm not sure.

  If someone can point me in the right direction, it would be greatly appreciated, and if all goes well, I explained to him what I want to do it properly.

  Jon

  Here is an example of code that I wrote to round a number (x) to the nearest quarter (nouveaux_x):

  var x = 22.15;
  var rounded_x = Math.floor (x);
  var x_nouveaux;

  If (x-rounded_x<=0.125) new_x="rounded_x;" 0="" -="" 0.125="" round="" down="" to="">
  ElseIf (x-rounded_x<=0.375) new_x="rounded_x+0.25;" 0.125="" -="" 0.375="" round="" to="">
  ElseIf (x-rounded_x<=0.625) new_x="rounded_x+0.5;" 0.375="" -="" 0.625="" round="" to="">
  ElseIf (x-rounded_x<=0.875) new_x="rounded_x+0.75;" 0.625="" -="" 0.875="" round="" to="">
  else x_nouveaux = rounded_x + 1; 0,875 - 1,00 round up to 1

  Edit: improved code...

• Question about converting objects in number

  This may sound a little silly, but I have a function that converts an object into a number and then checks if it is NaN to make sure that it is indeed a number, it returns true if it is a valid number, or false if it is not a number
  
  Now I have a TextInput and when I type for example 'HELLO' and call the function will return false (since it is not a number), if I type 23 it returns true (it is a number), if I hit 20 'a', it returns false. Everything works well except for a combination, if I type any number and the letter 'e', for example, 2nd, 9th, 5th, etc., it returns true, which means that it is a valid why number, is it?
  
  

  You can validate the number against a regular expression:

  /\d+(\.\d*)?/

  I think I have this right,
  Tim

• Question about expdp and impdp number of tables in a schema 11.2.0.3

  Hello Experts-

  I have 145 tables of a certain pattern that I want to save for example export and import the same tables in another schema is possible?

  1. REMAP schema to use for this purpose?
  2. I must quote all 145 tables? or I can use '%' as all the tables I want export & import start with a certain word-(RECORDS_)?

  Thanks in advance

  Hi 885068,

  I have 145 tables of a schema of some I want to save for example export & import the same tables in another schema is possible?

  Yes, it is possible.

  REMAP schema to use for this purpose?

  Yes, it is the purpose of REMAP_SCHEMA. Import metadata and data from one schema to another.

  I must quote all 145 tables? or I can use '%' as all the tables I want to export & import begin with a certain word-(RECORDS_)?

  It's always better when you have total control of what you're doing. I prefer to put all the tables, of course it not easy, but you can use sql statements to generate the TABLES all = parameters you need like the following:

  SELECT 'TABLES='||table_name
  FROM all_tables
  WHERE owner = ''
    and table_name like 'RECORDS_%'
  ;
  

  In case of import, you need not specify that you must import because the entire dump contains the tables that you imported exported tables, but it is very advisable that you specify the tables.

  So if the tables in the target schema must be created with names different than the original, you must use the parameter REMAP_TABLE =.:

  HTH,

  Juan M

• General question about the updates and version number

  I have a general question about versions and update.  I'm new on this and am in the deep end of learning I want.

  In vSphere web client, I see the following versions (these are exactly as the seller, he left a few months that I have screenshots in my documentation that match)

  Version - VMware ESXi, 5.1.0 1612806

  Profile - Dell (updated) ESXi - 5.1 - 799733 (A00)

  I am trying to familiarize themselves with the Update Manager and I noticed that there are a lot of patches and updates available.

  Lists of Update Manager 5 patches as "Missing" with Red x but directly above them are a list of patches with green tick indicating that "installed" - it is perhaps obvious, but im guessing 'installed' means really installed when displayed on the screen - there is an update installed, labeled "ESXI 5.1 all the update 2-' would be able to tell that it has been installed by the details of profile/version above?

  I don't think it's a big deal at this stage, but if I install all missing patches and then the details of the version/profile change in summary screen?

  I hope this makes sense.

  Thank you

  This article allows to correlate the updated version: products VMware correlating build numbers to update levels (1014508)

• Questions about Stor.e TV +.

  Does anyone have a contact point to raise a complaint about the lack of service from Toshiba? I spent £160 on a TV + Stor.e and did have some problems with it, as you can see from the few posts that I raised. After spending £160 on a point I don't understand why if the forum is the only option to support what he is no Toshiba engineers on this issue, who are able to answer my questions. I do not expect a 24 / 7 hotline for £160 I spent, but it would be good to know that a Toshiba engineer could answer my questions about their products. Especially since it's the second one I had which suffers from a cosmetic defect, I had to stick to feet about it as the Unit came with 4 pads ride around the box. I also have my doubts about the HDMI because it seems to be very sensitive to any movement in the area, causing the connection to remove.

  I got a Western Digital box media for more than five years and had no problem with this, the only reason why I changed, it was to make use of the connection to the local network, the HDMI connection and the fact it supported more than file formats. FSR this device was abit of a disappointment for me. So if someone could point me in the right direction, I would be very grateful.

  Hello

  I can understand that you are not happy with the current situation and usually if you buy a product it should properly expect and do no problem.

  As you probably already seen here it s a user to only user forum. This means that you can speak with normal people like you and me and there is no official support from Toshiba.

  In your case, it would be best if you contact an authorized service provider or call the Toshiba UK. The phone number, you can find on the site of Toshiba UK Web:
  http://UK.computers.Toshiba-Europe.com

  Just give the guy a call and explain your situation. I'm sure they can give you a detailed answer and if your TV Stor.e + must be repaired or not. When warranty hardware repair is free.

  I hope I could help you a little bit :)

• A few questions about the Satellite A100 PSAANE

  Hi friends,

  I have a Toshiba Satellite A 100 - PSAANE with Vista Home Basic preinstalled in it.
  Now, I have a few questions... I mention below: -.

  (1) if I want to format my laptop, I need a CD to install for Vista Home basic... then I don't have this Toshiba CD when I bought the laptop. So how do? question: How can I format it?

  (2) can I change my Vista Home Basic to windows XP? I think it's much faster than this one. is it advisable?

  (3) I have a GB of RAM in the laptop. Increase the RAM? I think that my laptop has become to slow down. is it advisable?

  (4) and on my screen, everytime I try to change my profile screen to windows Classic view, my screen begins to blink. and after a while, the screen turns off. So I can't change that. I put the color scheme of windows vista only. What to do about that?

  Please help me friends. Thanks in advance.

  Kind regards
  Perkins

  Hello

  Here, a few questions about the number:

  (1) usually, you should get the Vista Toshiba Recovery DVD. If you didn t receive this DVD then you can order it here https://backupmedia.toshiba.eu/landing.aspx or you could install the disc of Microsoft Vista.

  (2) of course, you can do this. I think that Win XP drivers can be downloaded from the Toshiba driver page.

  (3) Yes, you can upgrade the RAM. For more information, see your manual or search on this forum for similar topics

  (4) maybe it s associated with the graphics driver. Check if you can update. I would recommend additional check if you are using the latest version of the BIOS

  Welcome them

• A few questions about Toshiab reocvery disk for Satellite P300-133

  Hello guys,.
  I had a few questions about unpleasant surprises of recovery:

  (* 1) * I just make recovery DVD using Toshiba Recovery Disk Creator and he asked initially for 2 DVDs - but when one has been done it does not require a second blank DVD. Is it possible all the Windows Vista system files to write on 1 DVD?

  (* 2) * if I could reinstall Windows Vista using recovery of HARD drive option (by pressing F8) without using the recovery DVD?

  (* 3) * HARD drive partitions that will be formatted (just system C: or C: and E :) using HARD drive recovery?

  (* 4) * what is DVD - Image of the hard drives or the installation of Vista recovery files?

  Its pretty bad idea to not include BONES on DVD when I paid for it.
  Thanks for all the Toshiba problems :(

  1. I think the recovery disk creator means 2 CDs. I also have a Portege M700 with Windows Vista and a DVD. I got it and after that, I have a clean install of Vista with all the drivers and tools of Toshiba. Nothing is missing.

  2. Yes, you can reinstall Vista using recovery of HARD drive option when you press F8 at startup. You don't need the recovery DVDs, but you should create a when your HARD drive get some errors or something else. If you need a new recovery DVDs, you paid for one.

  3 HARD drive and complete partitions will be formatted, so backup your data first on a DVD disk external DRIVE, USB stick or something else.
  After the reinstallation, you have factory settings.

  4. the recovery DVDs is an image of the HARD disk on the factory settings. If you perform a recovery, there are all the drivers and tools are already installed. Of course, on the disk are files of installations of Vista, but you can use this DVD on your Satellite P300. The disc cannot be used on another Satellite or on a PC.

  If you have any other questions, take a look in the user manual. There are a number in the formations of the recovery. It s in Chapter 3.

• Question about "Windows 8.1 DG to Windows 7 Pro 64-bit" and Windows product key

  I have acquired a recnet ThinkPad T450 fdrom a retialer online (NCIX) and I hav ea a few questions about the installed Windows operating system.

  Before I just go further, HRE are some information about my particular system.

  Lenovo ThinkPad T450

  Model: 20BV00BUS

  CPU: Intel Core i5-4300U

  RAM: 4 GB

  Under the product description, it was stated "Windows 8.1 DG Windows 7 Pro 64." My understnading, the ThiknPad has been installed with Windows 8.1, but downgraded to Windows 7. There is also a Windows 8 Pro badge sticker at the bottom of the matchine.

  Is it possible, at the end of the user/consumer, to alter the functioning ti repressive back Windows 8.1?

  Can I create a recovery with Windows 8.1 disk?

  A separate but related matter relates to the Windows product key.

  I noticed the Ultrabook do not come with a sticker / label with the Windows product key (i.e. COST). Some quick research indicated that the Windows key is programmed into the BIOS.

  This indeed true (I wish an audit)?

  The key is visible in some way (for when you need to reinstall the operating system. I have not tried to enter the BIOS at the moment)?

  Thank you for taking the time to consider my question.

  Kind regards

  Victor L.

  Hi Victor,

  I'm in the same boat as you type, but want to keep the facilities of Windows 7 rather than pass them to 8. Just like you, I buy our Lenovo from different retailers and they come with windows 7 installed through the Windows 8 lower upgrade program.

  We had one or two laptops come with a recovery media (for windows 8/8.1 only) but have noticed that all laptops now come with no physical media or codes for the recovery. WIN8 stickers, you described is more came with the license key on the sticker (it comes to stop you using the same license again and again, microsoft will get more money if you buy another license etc.). I also saw that the key is essentially located in the BIOS but were not able to test what we use any of windows 8. I use it even at home!

  To answer your question, you can get a recovery of Lenovo for Windows 8 media!

  Go to the following link: https://support.lenovo.com/us/en/lenovorecovery

  (It help you understand why this method is used on this page as well)

  Select Start,

  Please have your serial number of your laptop, (to find it go to this link: https://support.lenovo.com/us/en/find-product-name)

  If you qualify (which you will very probably) Lenovo will ship for free, recovery disks give it a go, took me 2 minutes.

  I hope this helps.

  Best regards, Max.

• Ask questions about the HP Pavilion 14-V041TX Bluetooth

  Hello, sry for asking questions about simple things.

  How to activate bluetooth for laptop HP Pavlion 14-V041TX?

  Or how to bluetooth to detect other bluetooth devices?

  coz already try to use my smartphone, but cannot detect any bluetooth device or laptop.

  for what I know, I already install the driver for bluetooth.

  Maybe there's another driver, that I'm missing?

  Thank you.

  SRY for my bad English.

  HI @Ton1_qrenz ,

  Welcome to the HP Forums!

  It's a great place to find answers.

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  No worries about your English.  I believe that I understand your question, and if not, you can specify if you must post back.

  I understand that you are unable to detect Bluetooth devices.

  Here is a document to help you with this company. There are links that it contains other documents that can also be of assistance.

  Understand and troubleshoot Bluetooth wireless technology (8.1 Windows, 8, 7, Vista, XP)

  If the problem persists, try the following steps.

  Step 1. Go to Device Manager
  Step 2. Right click on "Bluetooth device" you want
  Step 3. Select "update driver software... »
  Step 4. Choose "Browse my computer for driver software".
  Step 5. Choose "Let Me pick from a list of drivers for devices on my computer.
  Step 6. Select "Ports (COM & LPT)"
  Step 7. Select "Microsoft" to the list of "manufacturers".
  Step 8. Finally select "Standard series via a Bluetooth connection.

  If you are unable to connect to a Bluetooth device, try the following:

  Step 1. Search for 'Change device' in the start menu in Windows 8.
  Step 2. Click on where it says change device installation settings.
  Step 3. Select No, let me choose what to do option.
  Step 4. Check the automatically get the device app option
  Step 5. Click on save changes to save the settings that you select

  So, you can try this

  Step 1: Go to RUN (Windows Logo + R) and type "services.msc" and Enter
  Step 2: Now find 'Bluetooth Support Service' and double click it
  Step 3: Now click on the Log on tab and type "Local Service" without the quotes
  Step 4. Click on "account".
  Step 5: Now remove any authorization of passwords the password field blank
  Step 6: Below the upper left title should be a hyperlink 'Start' click

  You can also view tab management power and unchecked the box "Allow the computer to turn off this device to save power."

  If it is still not resolved, I suggest contacting HP support for further assistance.

  Please contact our technical support at the 800-474-6836. If you are outside the United States / Canada region, please click the link below to get help from your region number. Phone goes everywhere in the world

  Good luck!