Communication by internet WiFi modem with wireless router

Similar Questions

• Connection to the internet using a Verizon Wireless router

  I have a Compaq Presario CQ60-210US running Vista 32-bit Service pk2 with an Atheros AR5007 802 Wireless card. 11b / g. I have problems to connect to the internet through a router with WPA-2 Verizon Wireless. I can connect to the wireless router, but it will not connect to the internet through it. I am able to connect wirelessly through other routers wireless without any problem. All solutions?

  Problem was with the wireless card Atheros who need an updated driver. Found a newer driver on a Czechoslovak website. Downloaded and intalled and solved the problem.

• Windows does not connect to the internet, even if my wireless router doesn't work and playing... See the description below.

  The following message has been provided during a diagnostic run:

  "The router/AP wireless for your network works, but your computer is not able to use an IP address to connect to the Internet.

  You will not be able to connect to the Internet, although you might be able to connect to your local network. Communicate with your network

  administrator or installer of router/access point wireless to help. »

  The client IP address = 192.168.1.101

  Gateway = 192.168.1.1 IP address

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  It will be useful.

• Bad wireless connection with wireless router. UN plug the router and plug it back and connection ok. Do this sometimes 2 or three times. Some time its ok.

  Set up a wireless connection from the laptop to my router upstairs and scia, we have that we have most of the time to kill the power to the router to reset the connection to the laptop. What anyone know or had this problem?

  And his age? If more two years, replace it. MS - MVP - Elephant Boy computers - don't panic!

• Services that can be disabled - Windows 7 stand-alone, single user of public access to the internet through AT & T wireless router.

  I'm trying to "understand :-)." "How to secure my laptop, a single user stand alone - not connected to any local network where obtaining internet access SECURE in my only goal.  I never SHARE with any other computer and want to disable ALL unnecessary services - what services can I disable in Windows 7 and with the Windows Firewall work with AT & T Internet Security Suite McAfee I entered and disabled all connections through the Windows Firewall to the internet PUBLIC - as I assume that the firewall 'rules' will block all malicious attacks - knowing that it is NEVER safe to assume something where I just enough conscience to accept the fact that I then know near NOTHING scares me.  Thanks - I'm trying to educate myself and the fear that Windows 7 will be obsolete before I have achieve this noble goal :-) - and then the nightmare should be repeated on a new version of Windows. Laughing out loud

  Hello

  I suggest you to visit these links for information on how to protect your computer.

  Consult the safety and Security Center Web site. You have a section to browse number that explains on the safety and security.

  http://www.Microsoft.com/security/default.aspx

  You can see the sections:
  http://www.Microsoft.com/security/PC-security/default.aspx#safety-products-and-scans

  http://www.Microsoft.com/security/online-privacy/default.aspx#passwords

  http://www.Microsoft.com/security/family-safety/default.aspx#overview

  http://www.Microsoft.com/security/resources/default.aspx#free-materials

  With regard to the Windows Firewall.

  http://Windows.Microsoft.com/en-us/Windows7/what-is-a-firewall

  http://Windows.Microsoft.com/en-us/Windows7/firewall-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows7/Understanding-Windows-Firewall-settings

  http://TechNet.Microsoft.com/en-us/library/cc755604 (v = ws.10) .aspx

  Hope the information is useful.

• A wireless router, without a modem?

  Hello HP Support Forums users,

  I have a question about setting up a wireless router. I was wondering if it was possible to put in place, without going through a modem. Currently, I connect to the internet by plugging a cable Ethernet, CAT5 port on my wall, and then plug the cable on the side of my laptop. Right now I have a disabled and I need my laptop to be able to spend my small office. So, is it possible to configure a WiFi router without a modem?

  TannerJP wrote:
  

  Hello HP Support Forums users,

  I have a question about setting up a wireless router. I was wondering if it was possible to put in place, without going through a modem. Currently, I connect to the internet by plugging a cable Ethernet, CAT5 port on my wall, and then plug the cable on the side of my laptop. Right now I have a disabled and I need my laptop to be able to spend my small office. So, is it possible to configure a WiFi router without a modem?

  Yes, simply plug the CAT5 Ethernet cable into the WAN or Internet port on the wireless router.  That's what Verizon for their FIOS service.

• Can connect to the wireless router, but not to the Internet

  Because I could not find this post, I published in my problem to

  Windows 7, connecting Local only, no Internet

  I think I described the problem a bit better here.

  I had a Gateway DX4300-17 with Windows 7 Home Premium for about six weeks. I connect to the Internet via a Netgear wireless router. My Internet connection dropped often, but I've always been able to reconnect to the Saturday. Since the start-up my computer Sunday, when I try to connect to the Internet, the system tells me that I am connected to the router, but there is no connection between the router and the Internet. I did a system restore to Friday, but it did not help. I searched the Knowledge Base and tried several things I found there. Running "sfc/scannow" indicates that all is well. I disabled the '6' Protocol (I don't remember the letters that were with this, but you probably know what I mean). This made no difference either. I thought I would ask for help here in the hopes of not having to restart the computer to the "hospital". That's a very different problem here barely a week. I need help, please.

  Hello Bill6009,

  Have you tried to boot your computer in SafeMode w/network to see if the problem persists?

  If so, try to perform a clean boot to see if you encounter the same problem.

  Please post back your results if we can help get your problem solved J

  Adam
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• DSL via a wireless router: slow XP, fast on Vista

  DSL via a wireless router: slow XP, fast on Vista

  Hello, I just moved into a new House that has DSL service. My Vista laptop connects seamlessly to the network, but my XP machine trickles in at 50-150 Kbps and is flaky. I rebooted everything, power all pedaled, verified and updated the drivers. (Maybe I missed something?)  The specs are all lower. Any thoughts on what is happening?

  Thank you!
  Brian

  EarthLink DSL
  VisionNet Modem
  Linksys wireless router (router broadband wireless - b)
  -BEFW11S4

  2 wireless laptops

  Get about 1 Mbps on a Vista Machine (which I believe is the expected rate).
  (Dell XPS M1210)
  Works with either ethernet or wireless connection to router

  Get about 50 Kbps on the XP Machine
  (Dell Latitude D830)
  Works with no wireless or ethernet connection to the router
  Intel Wireless Wifi Link 4965AGN,
  Driver: 12.4.3.9, Date: 28/05/2009

  Two laptop computers were working well 4 days ago in my previous House, sharing a connection to broadband Charter via a linksys wireless router.  The works of XP machine still work well pick up public Wi - Fi in coffee shops, etc.

  Under the name Vista computer works fine... I suggest to check again the Xp computer and disable the firewall and antivirus on the computer and try... You can try changing the wireless channel on the router... Also keep the mixed mode network mode.

• How can I change the password of the wireless router?

  Original title: change password

  Hello, I need help to change my password wireless internet please. I'm not very computer saavy, so I would appreciate simple instructions, please. I have a regular computer, I don't have a modem, a wireless router, access to, (husbands), a printer, my laptop? the cable company, son-in-law has compressed & PS3.  The problem is my stepson is autistic and mentally not mature enough to be on the internet and he knows the password. How can I change the password to the wireless internet? Then I'll also have to change it on printer, phone, ect... Or y at - it an easier way to keep, before taking any electronics away from him? Thanks :)  WeigeSS

  Go to http://whatismyipaddress.com/ and copy your IP address. Then open a webbrowser and paste the IP copied into the address bar. You must now enter your username and password (most often, it is not a WiFi password, but that this service provider you have given - it could be written on the contract or manual). Now, everything depends on what type of router you have. Usually, there is a security link or password somewhere on the screen. Click on it and then you can change the password.

  If you need further help, feel free to respond.

• WNDR3400V2 (RN600) router - wireless repeating with Wireless Modem Arris

  I need help. I have an Arris wifi Modem (TG862) - recently installed when moving into a new House and the signature to the top for cable internet. I have a problem with weak wifi signal in the rear rooms - with signal drop. I have the spare WNDR3400V2 - so, how can I use it to boost my signal, preferably wireless? I have trouble to get the right settings when you configure as Repeater with different guides does not not exactly to my hardware. I don't have too much knowledge on this and how do it, but any help will be appreciated. The PC in the bedroom becomes signal well enough, I'm fighting to get compatible with phones wifi...

  In order to strengthen the signal on the desired location, run a long ethernet cable from the modem to the NETGEAR router.

  Still, there is no way for these 2 devices to be connected wireless to the other.

• New att/motorola modem with linksys wireless router connects local only!

  Trying to set up my linksys wireless router to connect to the internet. I get local only access. Just got the new modem and was able to connect to the internet with a wired connection. I had no problem with my router and adapter wireless during the last 3 years. They had to create a new connection broadband with the modem to local and internet access. My Wi - Fi is a new connection, local only. Any help would be appreciated so to get my connection wireless internet.

  Hello

  Let us work together to solve this problem.

  I ask you to follow these links and check if the problem is resolved:

  Set up a wireless router
  http://Windows.Microsoft.com/en-in/Windows-Vista/set-up-a-wireless-router

  Setting up a wireless network
  http://Windows.Microsoft.com/en-in/Windows-Vista/setting-up-a-wireless-network

  Wireless network card: frequently asked questions
  http://Windows.Microsoft.com/en-in/Windows-Vista/wireless-networking-frequently-asked-questions

  For more information:

  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/thread/4215a10d-08DD-404A-a43a-635a2f141f0d

  Warning: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Please let us know the status of the issue.

• With the help of WRT300N Wireless Router with a USB modem (satellite)?

  Hey there!  I tried to find this answer in various places online, and I saw a few things that have led me to believe that this is possible, but nothing to explain as thoroughly as I'd like.  I have a N of Linksys WRT300N wireless router.  For the next few months, new home construction we do service by cable or DSL, so we use the Cricket's broadband Internet, which connects via a USB port (Cricket is a 3G network, managed by a cell phone company).

  I'm trying to understand if there is anyway that I can connect internet Cricket USB to my computer, as usual, but then connect my router to the computer somehow so that I can distribute this wireless signal?  I'm having crazy to move the thing USB from one computer to another and would really like to connect my PS3 wireless signal, thus.

  Does anyone have an idea how this could be done?  If so, could you explain to me what I need to do quite exactly?  I am running Windows Vista on this computer.  Thank you very much in advance for your help.  You're going to be spare me months with a value of pulling my hair out, believe me.

  Yes you can do it, USB Modem not connecting to the computer, the computer must be connected to the Internet Port of the router and then it will give a Wi - Fi connection and...

  To do this, you need to enable Internet Connection Sharing (ICS)...

• Problems connecting to the internet with my wireless router

  I have a WRT54GS v7 wireless router that I use with a modem ADSL ZyXEL P-660R-D1. during installation, I was unable to establish a connection to the internet, once my router is properly connected to my desktop computer and my modem. All the correct lights on my modem and router are turned on. Please help, I tried to turn off the two as instructed by the installation wizard, but who failed to make the internet connection works and I continued the installation process after many attempts. At the end of the installation, he said that my router has been set up, but I don't have an internet connection. What should I do to fix this?

  The problem you are experiencing is caused by the fact that you Zyxel and your WRT54GS both try to use the same 192.168.1.x subnet.   Your WRT54GS will not work properly if you try to put the same subnet on the LAN ports and the port Internet (WAN).  Also to note that the installation wizard will not work in your situation, then stop using it.  You will need to manually configure your router.

  There are two ways to solve the problem:

  Option 1) Change the subnet in the WRT54GS.    To do this, follow these steps:

  (a) turn off your network

  (b) disconnect the WRT54GS of other devices.

  (c) connect a single computer via ethernet cable, a LAN on the WRT54GS port

  (d) turn on your computer and the WRT54GS

  (e) point your browser to 192.168.1.1 and connect to your WRT54GS

  (f) change "local IP address" 192.168.2.1, then click the 'Save Settings' button and wait (3 to 60 seconds) of the screen refresh.  You will be probably disconnected from the WRT54GS.  Don't worry about this.

  (g) take out your browser and turn off the WRT54GS and your computer.

  (h) then, using an ethernet cable, connect the Zyxel ethernet port to port Internet (WAN) of the WRT54GS.

  (i) power of your network.  It should work.

  You will now access your pages of configuration WRT54GS to 192.168.2.1

  Option 2) the other way to solve your problem is to change your Zyxel to 'bridge' mode  (You will need to consult your Xyxel user guide, or your ISP website, to find out how to do this).  This will convert the Zyxel a real modem, and then he won't get an IP address.  After that, you need to configure your WRT54GS to your PPPoE connection for you.

  I guess that your Zyxel is a PPPoE connection.  If we perform a PPPoA connection, then does not allow Option 2 because your WRT54GS is unable to make a PPPoA connection.

  Additional notes:

  You don't need to do both options.  Choose one or the other.

  For a more normal web use including browsing, email, downloads, etc., or another option should work fine.  If you are an online gamer, you will probably prefer option 2, because this will make it easier to set up many online games.

• Laptop wireless with NETGEAR router Home Windows Vista detects on the local network and internet

  We have a laptop Toshiba Satellite L505-S6946 with Windows Vista on it. We bought a router Netgear Wireless G WGR614V10 a few months ago and installed ok. It worked fine for a few months. Now the network connection to the bottom rhs shows tray icon: 'Local only' for the connection of the SSID, we have implemented. Technical support Netgear has determined that the router works fine. But they noted that the router might get a static IP address in his settings of the adapter wireless Vista. And they said that something should be changed in Vista to a direct connection with the modem works fine for internet access, but it's bulky. Someone please do you suggest to fix this error? Thank you!!!

  Hello

  A message in the small window that says connected wireless does not mean that you really have a valid functional connection.

  Linking the means of router you can enter the IP base of the router in an address bar in one go, being able to connect, see and configure the router menus (extended to the wireless router manual should explain how to do).

  If it will not connect to your wireless router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  ----------------------------

  The wireless card drivers much also install utility wireless of the seller.

  Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).

  ----------------

  Firewall software can block traffic Local to the network that you are trying to use because it is not set to the network Zone Trust.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP (network IP number) of work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Error: "connection attempt timed out, please check the connectivity of the internet" when trying to connect to Cisco AnyConnect 2.5 on Windows 7 x 64 computer with modem usb wireless HSIA.

  Original title: issue with Cisco AnyConnect 2.5 on win 7 x 64 when connecting to the internet using wireless HSIA usb modem.

  I have win 7 x 64 enterprize edition on my laptop.

  I have problems with Cisco anyconnect VPN client. When I'm on my corporate network it works fine.

  But when I connect to internet using HSIA modem usb wireless home form, client AnyConnect VPN will not connect. The error I get is "connection attempt has expired, please check internet connectivity.

  Please help me to solve this problem as soon as possible.

  Hi Manish,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet forums for assistance.

  I also recommend that you contact the VPN support to help:

  https://supportforums.Cisco.com/community/NetPro/security/VPN