ASA Version 9.0 (1) - Ping works both inside and outside, WWW does not work for remote VPN

Similar Questions

• I need to know how to remove the most recent version of Firefox. I JUST downloaded tonight and my computer does not have this edit bar little to work with, so I can download the reader good Adobe and my internet was screwed up ever since I downlo

  I need to know how to remove the most recent version of Firefox. I JUST downloaded tonight and my computer does not have this edit bar little to work with, so I can download the reader good Adobe and my internet was screwed up, since I downloaded the new version of Firefox. I want just the old version of this back because I can't download the Adobe stuff which is necessary to protect my computer against hackers apparently not. It would have been nice to know he had a problem with the new update of Firefox BEFORE I downloaded it. I have Vista, which is usually a problem with Adobe and Firefox. I don't seem to be able to run a lot of Adobe at all on my computer because of the Vista.

  This has happened

  Each time Firefox opened

  http://support.Mozilla.com/en-us/KB/installing+a+previous+version+of+Firefox

• Access a chart xy both inside and outside of a loop

  Every morning.  Semi-new LabVIEWer here (five weeks fun).

  This one has left me speechless.

  I take data from up to three units GPIB, generating three sets of data current-voltage, and I'm working on a xy real-time graph.  Data in a table to two dimensions (n rows and six columns), and I select a few areas combo to display on x and there axes (maybe I would like V1 vesus I3 or I2 versus I2, or whatever.

  That the ILO works very well.

  The problem is, that it 'live' update (which, surprisingly, works well and quickly), I need to include the graph and the code used to parse the data inside the while loop ('while' n sets of data are taken) and it means that once the loop is completed, I can not access the graph or the code.  The best I can do is use property nodes to change things like auto scale.

  Rather than post my code, which, after five weeks, looks like a sick human kidney vascular system, I would ask if you experienced people have a general strategy in this type of case.

  I'm sure 90%, which is also the fact that I am struggling to find a way of keeping and using the data table filled outside the loop, that such dumping in a table.  In this case, I want a table for it, but shouldn't there be a way of storage of the table?  I come from a background of textual programming rather than based on objects, in case you had not guessed!

  Thank you!

  AndyI wrote:

  As I say, I think it's just my misunderstanding of the philosophy of LabVIEW, and there must be a very simple procedure to achieve this.  I would like to know what it is.

  Yes, as soon as the REAL case is over, the case of FALSE runs that feeds a table empty indicator on the outside. Also use a registry to shift to the outside while loop and initialize it to the outside with a table empty. At the end of the iteration, feed the updated table to the terminal of shift register to the right.

• How can I install CS5 on a replacement/new laptop? I paid full price in 2011 and the key (and it appears in my Adobe account under products), but it was a downloaded product and I can't find a download of this online version and my key does not work

  How can I install CS5 on a replacement/new laptop? I paid full price in 2011 and the key (and it appears in my Adobe account under products), but it was a downloaded product and I can't find a download of this online version and my key does not work in CC.

  Your key does not work in CC, this is a newer version and would require a new purchase.

  Downlaod CS5 here.

  Download the CS5 products

• Install DVD of Windows 7 (both x 32 & x 64) does not not on XP Pro installed (svc pack3) system

  Have problems of the 2 DVD of Windows 7 Ultimate full version to work with my system.

  When I put a DVD in one of my 2 hard drives, DVD & HD player lights up the show for a while (with the CD icon flashing for the mouse cursor), then stop the running lights. No charge to 'Install' on the screen for the installation of x 32 or x 64 of DVDs.

  When I try to view either the DVD using Windows Explorer, nothing is displayed for files on DVD. Yes, I can click on the drive letter & Explorer will appear to go in this drive (or the other), but... nothing is displayed in the registration part of window.

  Windows Explorer shows lists of files on other data DVDs, I have... (Don't have any other software on DVD for installation, so cannot get that verified.) However, software on function autorun.inf CD-ROM appears when I put them in one of my drives. Am only having this problem with the Windows 7 Ultimate version full recently purchased DVD.

  I am running XP Pro x 32 with Svc Pack 3 is installed & all the 'compulsory' updates installed. Boot drive is IDE, IDE slave; then 4 SATA drives, followed by DVD players. (the order of the parameters of drive in XP Pro), if this is important with this... I'm sure that's not. Only managed to get the message 1 times) win7 x 64 DVD indicating I was running XP Pro 32 x & x 64 win7 is not compatible with it. Win7 x 32 DVD 'should' load & go to the 'Install' window, but display anything, after the headlights stopped showing.

  I also tried 'start-up' from DVD Win7 x 32 & x 64, but the system finally goes back to load XP Pro x 32, instead of going to 'Install' using either the DVDs.

  Anyone has an idea why these 'new' DVD Win7 Ultimate full version do that?

  * original title - install DVD of Windows 7 (both x 32 & x 64) does not not on XP Pro installed (svc pack3) system. Boot from a DVD does not load the 'Install '. Any ideas why? *

  Try another method of installation:

  http://social.answers.Microsoft.com/forums/en-us/w7install/thread/ff8f440f-B956-4d82-8d8b-b42ff64115d9

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• As some Menu items: Modules, Help Menu and Pocket Extension does not work after update to 17.0

  As some Menu items: Modules, Help Menu and Pocket Extension does not work after update to 17.0

  This may be caused by the Tab Mix Plus extension

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do not click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can try to install the latest Dev version of Tab Mix more if you use this extension.

  See the sticky on the forum of Tab Mix Plus:

  • http://tmp.garyr.NET/forum/viewforum.php?f=3
  • http://tmp.garyr.NET/forum/viewtopic.php?f=3 & t = 15740

• Satellite L305D-S5895 - keys to functions and the wifi does not work with Win XP

  Hello

  first sorry for my English

  I bought a Toshiba Satellite l305d s5895, with Windows XP, I need a software, but the function keys does not work.
  So I need a driver, but I can't, and wireless internet does not work.

  > Where could it find special XP BIOS?
  In my opinion, there is problem because most threads here are on the European laptop models. then come to question United States. Toshiba Europe and Toshiba U.S. do not work together and each of them is responsible for own models and provide support for specific country notebooks models.

  For most models, so here in Europe Toshiba has offered two BIOS. We were already on the delivered Vista laptops. The Toshiba page download available BIOS for Windows XP Home edition. in most cases, it was version 5. XX and this BIOS was designed to support public services and specific tools of Toshiba. For example, all the FN key features was only available with this BIOS WXP.

  So if any of you have laptop model US they would see how the solution with Toshiba U.S. or US forum under http://community.compuserve.com/n/pfx/forum.aspx?webtag=ws-laptop&redirCnt=1

  Bye and good luck!

• DirectX, d3d9.ll & d3d10.dll and Windows Update does not work... (Same problem?)

  I had some problems with my computer lately...

  The first thing I noticed is that I failed to run games and applications and I got this weird error 'missing d3d9.dll' and something in style with... "it could be fixed if you have reinstalled the application," but it didn't and I kept getting the error, then I went to see if there was even a d3d9.dll or a d3d10.dll - but it was not...

  Then. I tried to download em for the internet, but later, I noticed that they were for DirectX and therefor was not sure I had good... Then I went to update my DirectX - but failed. He says that I already had an update of DirectX version and it refused to install. I however, perhaps I could uninstall directX, but I couldn't find where and how...

  Then I however, maybe it's because some weird windows update problems - so I went to check how many updates there. I check it the day prior to that, but all of a sudden there are 14 new updates that I had not installed yet (overnight 14 new updates!).

  Does anyone have a solution to this? Please, I desperately need help!

  Hi exique,

  1. don't you make changes before the show?
  2. on what game and application that you get this error?

  DirectX runtime for end-users (also known under the name of DirectX) is an extension for the Microsoft Windows operating system that provides a set of quick material orders, low level that they can use to improve performance for Windows games and multimedia programs. The current generation of Windows games and multimedia programs does not work properly without DirectX. So, by design, you cannot remove DirectX.
  See DirectX: frequently asked questions

  We recommend that you scan sfc (System File Checker) to see if any system file is missing or damaged. To do this, try the following steps on Vista and Windows 7
  a. visit http://support.microsoft.com/kb/929833
  b. run the scan successfully.
  c. restart the computer so that the changes take effect and check the result.

  If the problem persists, we recommend that you reinstall the game or program that causes this problem.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• USB ports, CD/DVD player, and Mike just does not work

  So I'm pretty sure that these things are happening at the same time, although there are risks my trying to troubleshoot the USB ports have contributed to the failure of the microphone (internal and will not capture sound) and cd/dvd drive (not open). Perhaps? It is true that I know little about these kinds of things, but I'm much less following the indications which is what I did to try to tackle the problem of USB port, which was the first I noticed. I followed all the advice I could find online for troubleshooting when all usb ports do not respond. I used Device Manager to disable in its regular and safe mode. I also uninstalled them all in both modes (even if they reinstall until I'm able to restart). I unplugged and wait 5, 10, 15 min etc. There was a difficulty mentioned about watching the. Mine and INF files do not contain the mentioned error. I'm tempted to all my files backup and restore the computer to factory settings, especially now that the CD/DVD player and the micro does not work. This would solve the problem? If these things are related? Could even restore settings because I can't have in the cd/dvd drive? It's a dell inspiron 1721, and it crushed while you restart for almost a whole day just all the time I've began to notice all these malfunctions. I really appreciate any guidance!

  Good so I solved all of these problems. I don't know what did the trick, but when I went back in the BIOS to re - activate the ports they have worked!

• CD drive does not open and the light does not work

  original title: single CD player problem

  The problem with my CD player seems to be unique I can't find an answer, or someone else with the same problem online.

  My computer is custom built, the CD player lasted me 1.5 years no problem, not until one day I realize, it does not open and the light does not work on it, I ordered a new drive and installed that one, still does not work. so, I replaced the SATA cable which connects to the motherboard, still does not.

  When I go to my computer the drive appears but when I right click > eject it says: "year error occurred while ejecting CD drive D".  It also appears in devices such as SCSI CdRom Device Manager but I am not sure if it's actually my CD player.

  I also tried troubleshooting http://support.microsoft.com/gp/cd_dvd_drive_problems and no solution.

  WTFFF ideas? I really hope that its not the motherboard

  There are two cables you need to connect to the drive, one for data and one for power.  You must connect both training at work.  If you only have the data cable is plugged and not cable power which would be a possible cause of the problem that you see.

  "Ryanb1290" wrote in the new message: * e-mail address is removed from the privacy... *

  Sorry, im just of knowledge about computer hardware.  you say that I should try a different agreement or another port to plug in?

  I tried to connect on a couple different SATA ports on the motherboard.

• updated my driver for my Ethernet controller and now it does not work

  Original title:

  Network network network Ethernet device

  I updated my driver for my Ethernet controller and now it does not work... I can't put it up, are the only choices that I
  to establish a wireless connection or set up a broadband connection using a user name and password but my ISP does not require
  a kind it will not accomplish the connection in place, I use win 7 64, how do I fix this so I can use my connection ethernet again?

  Hello

  You can try the following steps and check if it works:

  Method 1:

  You can restore to an earlier device driver if you are having problems with your computer or device after upgrading the driver.

  Restore a driver with its previous version

  http://Windows.Microsoft.com/en-us/Windows7/restore-a-driver-to-its-previous-version

  Method 2:

  If the steps above fail then you can perform a System Restore to an earlier point when it was working fine.

  It will be useful.

• I use a database program in a number of previous versions of windows and windows 7 does not allow the program to launch denial of service.

  Application of program compatibility does not start

  I use a database program in a number of previous versions of windows and windows 7 does not allow the program to launch denial of service.  What gives?

  If you have Windows 7 64 bit without BACK program can run because there is no 16-bit subsystem to run it.

  Try dosbox http://www.dosbox.com/. If that won't work your program, you'll need either a new database or run the BACK or on a 32-bit version of Windows in a virtual machine like VirtualBox https://www.virtualbox.org/.

• I need to reinstall Adobe Acrobat 9 standard on the net, I have a new laptop and the CD does not work

  I need to reinstall Adobe Acrobat 9 standard on the net, I have a new laptop and the CD does not work

  Copy the contents of the cd in a desktop directory.  install from this directory.

  or

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 pro extended exe,7z extended pro 9 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6,7. 5.7.1|  4.4 | 3.6
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• I downloaded version 5.7 of Lightroom in order to support the captive capture on my Nikon D750 and its still does not. More when I was invited to give my serial number for the update that was not the case that are on my Adobe profile, although I purchas

  I downloaded version 5.7 of Lightroom in order to support the captive capture on my Nikon D750 and its still does not. More when I was not invited to give my serial number for update is no where on my Adobe profile, although I bought and pays every month for my creative cloud for photography. Help, please

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  If Yes

  Some general information for a subscription of cloud

  Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• Option button and associated features does not work!

  Hi Pros,

  I am facing the following problem:

  1.I have an interactive PDF created in Acrobat 9 Pro.

  2 have a few option boxes, each radio buttons be assigned been worth (for example: 1,2,3 etc.)

  3.I have a text box in which the value of the selected option button is displayed.

  4 PDF works fine on my machine.

  5. customer is to have Internet Explorer version 7.0.5 and Adobe reader: 8.2.6

  6. the option boxes and associated features does not work on the client computer.

  7. the text box displays "0" even if we have a radio button with a value of 2 or 1 is selected.

  What is the problem? How can I solve this problem?

  Help, please.

  If you have disabled JavaScript or automatic calculations in Reader preferences, you will get this type of behavior. You can test yourself by changing your preferences (Edit > preferences > JavaScript, Edit > preferences > forms > automatically calculate field values). All calculated fields depend on JavaScript behind the scenes.