A run Diagnostices tools/said memory loss

Similar Questions

• Satellite L40 - 14F: the Memory Diagnostics tool has problems with my hardware

  Hello!
  I have Toshiba Satellite L40 equipped 14F of Windows Vista.
  I did a memory test using memory diagnostic tool, bulid in Vista, because these last two weeks, I had two times a blue screen.

  Diagnostic tools noted memory problems with my hardware.
  Now what?

  My laptop is new, I bought it on 28.12.2007.

  If you have problems with your hardware then don t waste any time and contact huh ASP in your country for a control.
  If there are a few problems with the equipment the warranty should cover everything.

  Good luck

• HP Pavilion Elite m9500t: monitor going to sleep at startup; Cannot run Diagnostics or repairs

  Months and months passed, my system wake up from sleep mode.  Could not find a solution, I gave up using the mode "Eve" and restarted with each use.  The other week, he began to enter the mode "sleep" during navigation only to chance on the web.  It would have then several hard reboots (holding in the power button) until it would get back to the top.  Several because he would fall asleep again upon restarting, so I have to do it a few times to finally get to stay awake.

  Last night, as a Christmas gift lucks for me, he did it again.  Only this time he won't return after half a dozen hard boots.  He keeps falling asleep start-up or running diagnostics or repairs or all the other options I can try briefly.

  I tried a different monitor; It still gives me the error 'no signal '.  So now I know that it is not the monitor.  That leaves the video card, motherboard, power supply and the operating system as the culprits.

  I can't test an any of them however, because as I said, he falls asleep during execution of start diagnosis, repair or anything else.

  Inside my machine is clean; does this when he started to do this.  I also felt a very low ozone smell last night when he crashed and refused to wake up this last time, which could mean that it is a problem of card and the card is fried.

  I am at my wits end and is about to give up on this.  All that I know is that I do buy it more products HP.  The number of threads on problems similar to mine is staggering, and nobody seems to be able to offer a real solution from HP.

  If anyone has any ideas for last minute... I'll give them a whirl.

  «As far as I know that I won't buy HP products.» is a bit harsh for a machine that is 5 years old."  But it is up to you.

  This means that for the monitor to go to sleep and the 'no signal' - there is no video from the PC to the monitor.  With not enough information on the model (according to the HP support site) number, it could be the graphics card itself does not, assuming you have a discrete video card.  In this case, remove the video card and use the onboard video by connecting the monitor to the VGA port on the back panel.  That should allow any test that can must be filled.  If everything checks out, replace the video card. Now, if there is no video card and you already have the video embedded, then install a video card to see if this fixes the "no input signal".  If you don't have or can't borrow one for testing, getting a single used for the test card is not too expensive, if you are not sure of the problem.  If you are sure the video card is the problem, then buy one that meets your needs.

• My Windows XP home has lost, it is the function of help when I go to help & Support it says a system service is not running and then said go to the Support & Help! ?? Catch 22. Thank you, Dennis Australia

  When I go to help & support it says a system service is not running and then said go to support &! ??
  Catch 22.
  Thank you, Dennis
  Australia

  Go to: Control Panel, administrative tools, Services, double click on help and Support.

  Startup type: automatic

  Service status: click on start, click on apply, click OK

• Why my pc does not work no matter what .exe? I couldn't even run diagnostics

  Why my pc does not work no matter what .exe? I couldn't even run diagnostics

  Hi SteliosArmenis,

  Thank you for keeping us posted on the State of the question.

  I see there is that the antivirus installed on the computer could not detect infections. To ensure that the computer is clean, we can run a thorough scan using Windows Defender in offline mode.

  I suggest to download Windows Defender Beta offline to a flash drive, CD, DVD or USB and then perform the steps.

  The articles explain how to create a disk and run the scan.

  NOTE: the program must not not to be run / run from the office.

  http://Windows.Microsoft.com/en-us/Windows/what-is-Windows-Defender-offline

  http://Windows.Microsoft.com/en-us/Windows/Windows-Defender-offline-FAQ

  Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Hope the information is useful. If you need help with this problem, feel free to post you question in the forum. We will be happy to help you.

• I have a server esx 4.0 need to run diagnostic tool Smart Start CD version 8.4

  We have a problem in one of the ESX host and need to run this version of Smart Start 8.4 on ESX server diagnostic tool.

  Can someone guide me how to run this tool?

  Insight Diagnostics user's Guide

• What can I do to make the Satellite A665-S6086 run with the new memory?

  I was able to update the BIOS for my Satellite A665-S6086 by updating 2.30 on CD burning. I have Windows 7 64 bit. I needed to update the BIOS, because I upgraded my RAM/memory of 2 GB (4 GB total) two cards two cards of 4 GB (8 GB total).

  My question now is when I start my computer with the new RAM/memory (two cards that are KTT-S3BS / 4G Kingston DDR3 1333 MHZ SODIMM SGL RANK), it freezes on the screen from Windows startup. Then when I hold the power button to shut it down and restart it, it wants to start using Windows repair but then crashes again. When I put in the memory of the old man and he start up, it starts the Windows repair and runs normally.

  What can I do to make my computer run with the new memory?

  I thank very you much in advance!

  What you can do?
  Buy an another RAM modules that are fully compatible with the laptop.
  It seems that you want to use the RAM modules which are not totally compatible and therefore the system hangs.

  By the way: the CPU that is used in this notebook runs the DDR3-800 and DDR3-1066
  RAM modules.
  http://Ark.Intel.com/products/49020

  I would not recommend to use the modules of DDR3-1333 but PA3677U-1M4G 4 GB DDR3-1066

• HP Jet 7 I can store and run programs from the memory card

  I have a HP Jet 7 with 64g memory card.  Can I store and run programs on my memory card?  How can I do?   Right now I store data on the card only.

  Hey @Tammy21856,

  Welcome to the forums of HP.

  I understand that you wonder if the programs can be installed in the storage on your Tablet 7 SD stream.

  You most certainly can. However, there are a few conditions. The first is that storage SD will be not as fast as the internal memory. The second is that the program that you install custom support install locations, but most programs do that should be of little interest. The last thing is that you can install office on the SD storage applications. Windows applications must be installed on the C:\ drive. In Windows 8, there was a way to install apps metro to SD storage, but the feature has been removed in Windows 8.1.

  Thanks for posting and I hope that answers your question.

• Your computer is running out of available memory. Flight Simulator will now exit. You can't have enough free space on your hard drive. Run Disk Cleanup to free up space, and then try to run Flight Simulator.

  «Your computer has run out of available memory.» Flight Simulator will now exit. You can't have enough free space on your hard drive. Run Disk Cleanup to free up space, and then try to run Flight Simulator."

  I tried to adjust the size of swap file, and I have tried no pagefile.
  But I still get this error Message When I try to start FS9.

  Windows Vista Edition Home Premium 64 - bit Edition
  : AMD Athlon (TM) 9550 Quad-Core processor
  (Vivid RAM) memory: 6.00 GB

  You must specify a linker flag this option in the header of the image of fs9.exe because FS9 is a 32-bit application and use 2 GB of virtual address space.
  With the indicator largeaddressaware under your 64 bit OS, it is possible for FS9 to use up to 4 GB of address space.
  Get the SBB Explorer (http://ntcore.com/exsuite.php) open fs9.exe, header to open the file then click on 'Click here' and mark "App can handle > 2 GB addresset", save and close fs9.exe.

  As a preventive safeguard your fs9.exe before if something goes wrong.

• error message administrator rights are required to run this tool

  I am trying to install a HPUSB.exe program to fix my USB.  It is a program of Hewlett-Packard.  However, when I try to run the program - I get the error msg: permission denied.  Administrator rights are required to run this tool.

  I am the administrator... and it wont let me run the program. Why?

  Thank you

  Tammy

  Try the click with the right button on the program, and then click Run as administrator.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Photoshop CS3 does not start with popup indicating that "licensing for this product has stopped working" I tried uninstalling and reinstalling 3 times, including after you run CCCleaner tool.  Any help would be appreciated?

  Photoshop CS3 does not start with popup indicating that "licensing for this product has stopped working" I tried uninstalling and reinstalling 3 times, including after you run CCCleaner tool.  Any help would be appreciated?

  Same fixed.  At executed license repair tool, Adobe - Adobe licensing repair tool, and it fixed the problem.

• the sysadmin user is not able to run diagnostics through OAM?

  Hello
  When I try to run diagnostics via the OAM navigation > Site map > Diagnostics & Repair > Diagnostics > run diagnostics, the system throws an error as > > year error has occurred! Please note: you don't have sufficient privileges to perform this function. > >. Is sysadmin should have any role (RBAC) using User Management?
  
  Use of "diagnostics application" it works very well.
  
  Concerning

  PL see the first yellow box in MOS Doc 235307.1. From 12.0.6, you can only run diagnostics from the Menu of the EBS with the responsibility of "diagnoses of the Application.

  HTH
  Srini

• Cannot run diagnostics after that put 12.1.3 at level of 11.5.10.2

  Hi gurus,
  
  We have recently updated our 12.1.3 11.5.10.2 application
  After the upgarde we cannot run diagnostics at all. We get the following error when running diagnostic-
  An unexpected error occurred while running the test. Please switch to developer mode to diagnose the problem
  
  Please help resolve this error.
  
  Thank you
  Khan

  Hi Khan,
  You should see the error in the log below.

  $INST_TOP/newspapers/appl/rgf/oam/weboam *.

  Please pos error message

  Thank you

• I have 8 GB of RAM, but I am having major problems with my pc. Error message when I could actually run diagnostics said system is excessive paging. Help, please.

  Have also run the Windows memory diagnostic tool, but system says there is no problem. Have tried everything. Startup Repair is also no problems but there obviously, it is because although the Office seems normal when you can actually get for her, he is immediately frozen and I can't access anything whatsoever files, internet, e-mail. Fortunately, also a laptop so I tried to find help!

  Hello

  • What is the brand and model of your computer?

  There are several reasons why you may experience excessive paging.  If you do not have enough RAM to run Vista and all additional progtams, then your computer is using your hard drive as additional or virtual memory. Thus, when the system uses the hard disk as memory, excessive paging that is more.  It is therefore possible, you need to add more RAM to your computer.  If you have less than 2 GB of RAM, you can consider adding more.

  Another reason why this might happen is if your computer is infected with a virus that uses system resources.  So to run a full virus, malware, spyware, trojan, scan your computer to make sure that it's clean.

  Microsoft Security scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  These articles will explain what is virtual memory, how much your computer is currently using and how to change or adjust the amount of virtual memory available on your computer.

  What is virtual memory?
  http://windowshelp.Microsoft.com/Windows/en-us/help/fd3e9104-1076-4600-9F9D-8739849387ec1033.mspx

  Discover how memory is using your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/6e566289-20FA-4ED4-BDDF-0b36a77b003c1033.mspx

  Change the size of virtual memory
  http://windowshelp.Microsoft.com/Windows/en-us/help/89ca317f-649D-40A6-8934-e5707ee5c4b81033.mspx

  Prevention of problems of memory
  http://windowshelp.Microsoft.com/Windows/en-us/help/34955e8d-9e3b-4f68-8e7d-773c167c61e21033.mspx

• VMware Fusion 7 and VMware Tools - leak memory in Debian comments

  At some point during my updates from Mac OS X to Yosemite, VMware Fusion to 7.x and my Debian a guest to 8.0 "Jessie" on my 2012 Mackbook Pro, leaking memory of the Linux kernel is developed.  If I follow these steps, then I'd lose soon about 3 GB memory of the core area.

  1. Install Debian Jessie in a new machine virtual de VMware Fusion
  2. Install open-vm-tools or VMware Tools bundled.
  3. Perform an intensive IO as operation simply cat/dev/zero |-c 1000000000 head >/tmp/test.txt.
  4. Smem - wtk and see ~ 3 GB memory under the dynamics of the kernel memory, benefit.

  I opened the 15709682007 assistance request and the representative said that they will fix the problem in a future release. In the meantime, I have what seems to be a workaround for someone else that is affected.  Basically, pulling packages from backports jessie seems to have solved the problem.  This is based on the comments added to open-vm-tools.

  1. Add the Debian repository -backports jessie in /etc/apt/sources.list
  2. sudo apt - get update; sudo apt - get install t Jessie-backports open-vm-tools-dkms open-vm-Tools-Office
  3. sudo apt - get - t jessie-backports dist-upgrade (install kernel 4.1)
  4. Restart comments

  A few quick thoughts:

  1. If you have several virtual machines (or other programs) running on your computer host and VMware Fusion detects that there is memory pressure on your host computer, it uses the "balloon" (vmw_balloon for the latest distributions of Linux) Guest pilot to fly some memory of the guest OS.  This memory "stolen" would appear as memory Dynamics non-cache kernel inside the guest.  Running "sudo rmmod vmw_balloon" should release all memory climbed to the guest OS.  Note that using the balloon driver generally improves the performance of the guest and host, despite the appearance of fear "used memory" inside the guest-"used memory" is just a thing of accounting that we had to use in order to change the priority of the memory between the host and the guest.  It is not "used" in the conventional sense of the term.

  2. I believe that recent versions of virtual hardware non-cache dynamic kernel allocate the necessary memory for SVGA and 3D features (display RAM, texture RAM, etc.).  Disable graphic 3D acceleration or by reducing the amount of graphics shared memory if you are using a new version of virtual hardware (both in the VM > settings... > display) might help.  Decommissioning of a virtual equipment as early (in the VM > settings... > compatibility) can also help.

  See you soon,.

  --

  Darius