A security XP KB2707511 update doesn't load, what can I do?
I have install all MS updates when they arrive.
It keeps coming, the installation do not 'take '.
Hi Eric,.
1. you receive an error message when you try to install the update?
2 have you made changes to your computer recently?
3. do you have Service Pack 3 installed on your computer?
I suggest you to follow the steps and check if it helps.
Method 1: Perform a clean boot, and then check if it helps.
How to configure Windows XP to start in a "clean boot" State
Note: Make sure you perform the steps in How to configure Windows to use a Normal startup state to start your computer normally.
Method 2: Follow the link and run Microsoft Fix - it, and then check if it helps.
Diagnose and automatically fix common problems with Windows Update
Method 3: Install manually updates, then check if it helps.
To install updates manually by following the steps mentioned below.
(a) go to http://www.microsoft.com/download/en/default.aspx
(b) research updates using the KB number for the update.
(c) download and install it.
Method 4: Reset Windows update components, and then check if it helps.
How to reset the Windows Update components?
To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/ )
How to back up and restore the registry in Windows
Tags: Windows
Similar Questions
-
When I try to start lightroom 6 it opens only the first window, but nothing more. ligthroom closed several times, restarted the computer, update system, nothing. What can I do?, when I try to start lightroom 6 it opens only the first.
Hi silvers.
Please make sure that your graphics card and Lightroom 6 are up-to-date. Latest version of Lightroom is 6.4.
Please check the FAQ and troubleshooting of Adobe Lightroom GPU and disable the use of the GPU in Lightroom.
What is your operating system?
Kind regards
Assani
-
Windows 7 Professional 64 bit
Windows 7 Service Pack (so that I don't get a bunch of file wrong mistakes of corruption when using svn)
Outlook 2010 (it works but I had to restart Windows forcefully during the first round as she tried to change the update settings)
Now I can not install XPMode and cannot run Windows Update. There is no error, no errors in the log of events, loading just perpetually for initial load of XP Mode or Windows Update.
How can I fix Windows Update?
In this forum, you will find support for Win7 SP1 RC: http://social.technet.microsoft.com/Forums/en/w7itproSP/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
For a week now, when I run Firefox a windows prompts me to apply critical updates, I click Next and says he is trying to connect to the update database, but it can also take all day by showing attempts but do not go anywhere. What can I do? Thank you
You are welcome.
Could you please click on the button "solved it' next to the post that solved the problem for you? This will help others looking for a solution to the issue.
Thank you.
-
Microsoft (KB2467175) security update failed with code 0 x 80244018 and (KB2467174) has failed. with code 0 x 80244018 what I can do? Thank you
My problem is solved
-
29.01 Firefox don'update... What can I do?
I downloaded firefox 30... I press to restart firefox, but nothing I have 29.01 no 30...
I downloaded a new copy and I solved the problem... no way to update the 29.01
-
I have the 'Add-on' and 'the extension manager' Add-ons installed. Extension manager does not display the extensions that I use and the add-on Manager shows it loads the page but will not charge. I tried all the troubleshooting suggestions but none will fix the problem. How can I fix this problem so I can manage my Add-ons
try to remove/rename the following files, if present in your profile folder - they store information about your extensions & might have gotten corrupted: extensions.ini, extensions.cache and extensions.rdf, extensions.sqlite extensions.sqlite - newspaper (they will be regenerated the next time you launch firefox).
ALS see https://support.mozilla.org/en-US/kb/Unable%20to%20install%20add-ons#w_co...
-
Windows Update is updating very slowly. What can I do to make it faster?
I try to install some updates, but Windows Update is very slow. I tried to look in Windows help, but there is nothing there.
Hi dgbystrom,
Thanks for posting answers.microsoft.com
Would you try these steps and let us know if this increases the speed or the speed, updates remains the same:
- Boot your system in a clean boot State. (Start with step 1 - then try the update.)
- After I started using the settings described in STEP 1, manually download an update and run it manually.
Here is a link to the download Site:
(http://support.microsoft.com/gp/DOWNLOADOVER )
In step 1 times how long it takes to download and install. If it seems to be faster and you still have updates on the left, proceed to step 2. Describe errors or if there are changes in time download in this step.
Continue through the steps, if you have enough downloads and try to isolate which can delay the process.
Report questions or concerns to us in the forum for more information.
Important note: do not forget to put your system back to a NORMAL STATE by following the steps described in STEP 7 of the clean boot procedure.
Thank you for working with us.
Kind regards
Debbie
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
If you do not have from speakers after an update (Windows or Bios), please try a Hard reset first. Also, keep reset material mind does the same thing with each cell.Now, if the hard reset does not work, you will need to update the Audio drivers (Realtek High definition (HD) Audio Driver) on the HP site.
Once you arrive at this page of your product type # in (if you don't know what your product is # or when it is on the laptop, here is a video that will show you exactly where to find ) > search click > select the option 'Software & Driver Downloads' > choose your operating system (not sure what operating system you have or where?) ( This should help out you) > then click after selecting operating system > scroll down and click on the + (plus) next to "Audio driver" > and then select the most recent version by checking the date on each download > then run. Now test the sound after installation.
Also, please try to use Recovery Manager to reinstall the IDT HD Audio Driver If the steps above do not work. How to use the Recovery Manager to reinstall the drivers and software is detailed in the document below.
http://support.HP.com/us-en/document/c01868333
The last step to do if you get always no sound at all is a system restore to when you know the sound worked and do not download the last updated after that.
Here is the document to show you how to proceed. Select the option at the top that says "restore windows to an earlier point.
Just make sure and save the files and upload, you have recently installed or saved on your laptop.
THX
Hope this information is helpful to you.
THX guys
-
My computer couldn't install updates for awhile, I tried everything I know possible to do. I restored my computer to factory 2 different times and still nothing. It is said there are 8 important updates that must be installed, but since there is no way have to install because of the error I have no way to install them. If anyone has any ideas on how to solve this problem, I would be very grateful for your help.
Hi BritaneyFlorance,
The factory restore process is provided by the computer manufacturer. Visit the Web site of the manufacturer for the factory restore instructions/troubleshooting steps specific to your make and model.
-
I am trying to put my activation key to activate Windows 7 but doesn't. What can I do?
Hello
I am using windows 7 pro, operating system, if enter the product key, it shows this error code: 0xC004E003. I tried to activayte by phone but it does not show the Activate by phone option, I tried this option slui.exe 4 also. But still it shows not the option. Help me please to this option. Because I will have less time to activate it.Install the appropriate update
Update for Windows 7 for x 86 based systems (KB971033)
http://go.Microsoft.com/fwlink/?LinkId=150841or
Update for Windows 7 for x 64-based systems (KB971033)
http://go.Microsoft.com/fwlink/?LinkId=152411 -
In November, has been updated InDesign and Illustrator, but Photoshop has not been updated. What should do? My son has CC and all this programs has been updated
This error message did you receive?
Was - this U44... Update error http://forums.adobe.com/thread/1289956 can help
-
replace battery on laptop aspire 8930g, it does not load what can I do?
the battery icon says plugged and charge but nothing happens
Hi Silvano,
This problem may occur due to hardware problem.
What version of OS are you using?
Method 1:
I suggest you run the Microsoft fixit tool and check.The problems of power consumption and extend laptop battery life
http://support.Microsoft.com/mats/windows_battery_power_settings/en-usMethod 2:
If your operating system is windows 7, I suggest you to return the item and check if that helps.Solutions to common battery problems
http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-battery-problemsIf the problem persists, I suggest you to contact the manufacturer of the computer, because this can be a hardware problem.
http://www.Acer.ca/AC/en/CA/content/service
Hope this information helps. If you need more assistance or information on this question, reply to this post. I'll be happy to help you.
-
my network drive doesn't work what can I do to fix
He said the network drive is not available how can I fix this setting
Hello
1. have you made changes on the computer recently?
Follow the steps listed in the article below and check.
New drive or mapped network not available in Windows Explorer drive
http://support.Microsoft.com/kb/297694I hope this helps.
-
I keep getting updates security for (KB2707511)
Original title:
Update of security for (KB2707511)
I keep getting updates security for (KB2707511) are these duplicates or other updates for this update?
Tahnk you
Randy Miller
Hi, Randy Miller,.
If you are offered several times the same updates, then you can follow the link below:
Windows Update or Microsoft Update repeatedly offers the same update
http://support.Microsoft.com/kb/910339
Let us know if it helps!
Maybe you are looking for
-
I've never had a problem until a few days ago. My daughter and I text all day walking and when I had not received messages from him, later we thought it was due to my phone. After a while I started to get the deliverable! But she said anything that I
-
A45-S250: unable to load everything that was engraved on a dvd disc
Hello. recently I had problems trying to load everything that was engraved on a dvd disc.Before that I would be able to burn avi files and watch them at a later date, but now nothing is coming.When I insert a disk and then click Properties, it says t
-
Copy-paste/Clipboard bug in Windows 7 if the target is not open before the copy operation
Copy-paste/Clipboard bug in Windows 7 if the target is not open before the copy operation Behavior of copy - paste doesn't seem to work properly in Win7. I just migrated to a new machine of Windows 7 with new Office 2010 installed where I performed
-
Hello I knew that finding ITU version of motherboard or chipset to download the drivers of it .you must click pause / break key on startup then the computer wil show just like the version of the motherboard bios. I just tried on my computer to start,
-
How to pass the number object type to bind the variable in a select statement
HelloI have a scenario like,UI, we store the values in the type of object, and this object type must be spent in a select query to retrieve the data accordingly.Is it possible to do so.If this isn't the case, please let me know how to take the values