A table can cause two distinct values by using 'or '?

Similar Questions

• dynamic generated tabs of the table, can not get the values incremented for the action of the button

  HI -.

  Here is the configuration:

  I have a basic table that has 6 values in there (i.e. the tabs).

  The tabs are generated without problem and when I discover things six show.  For example:

  Video clip: frame = 1 Target = "_level0.tabsMC6"

  so it's cool.

  Now when I go to configure the action of button for these babies, if I use the _level0.tabs.MC6 so that I can trigger button available for this tab or one if I change the value of tabsMC.  What I want to do is to try to reduce the code and have an increase in value of tab, but the best I could achieve is to have the last work in the tab.  What is interesting is that if I try an other tabs (1-5) they are all trigger tab #6.

  What I have right now is:

  function tabCount (): Void {}
  for (i = 0; i < _root.slideContainerMC.tabList.length; i ++) {}
  _level0 ["tabsMC" + i].clickerMC.onRollOver = function() {}
  _level0 ["tabsMC" + i].gotoAndStop("on");
  }
  }
  };

  (Note: tabList is the picture I mentioned above and Yes, in an another MC, which = code in every sense but I'm in a hurry)

  I need guidance is how to get all the tabs for the actions of the individual buttons.  I thought that the script above woul have then button actions for

  tabsMC1

  tabsMC2

  tabsMC3

  tabsMC4

  tabsMC5

  tabsMC6

  what it does exactly.  tabsMC6 is the only tab that will show you the status 'on' - I can ride on one of them, and it's the only tab that says this rather than EACH tab showing a State.

  Looks like I'm missing what is obvious!

  Thank you!

  you define tabMC0,..., tabMC5.  If you want tabMC1,..., tabMC6 use:

  function tabCount (): Void {}
  for (i = 1; i<=_root.slideContainerMC.tabList.length; i++)="">

  _level0 ["tabsMC" + i] .ivar = i;

  _level0 ["tabsMC" + i].clickerMC.onRollOver = function() {}
  This._parent.gotoAndStop("on");
  }
         
  _level0 ["tabsMC" + i].clickerMC.onRollOut = function() {}
  This._parent.gotoAndStop ("OFF");
  }
         
  _level0 ["tabsMC" + i].clickerMC.onRelease = function() {}
  This._parent.gotoAndStop ("delivery");
  }
  }
  };

  and the ivar part provided that you would need the ith tab to know that it is the ith tab.  Ivar stores that I have the value used when this particular tabMC was created.  If you don't need that, delete it.

• Airport Extreme can amplify two distinct networks?

  I have Cox hispeed internet and a simple modem which is divided into two separate networks; one of my computers and the other for support (Apple TV, etc.). My unique adjustable Airport Extreme upward to stimulate each of these networks or I am only able to stimulate a? Thanks for the tips!

  I have Cox hispeed internet and a simple modem which is divided into two separate networks; one of my computers and the other for support (Apple TV, etc.).

  Not exactly what you mean by "split into two separate networks" here. Do you mean that you have an Ethernet switch connected directly to the modem that is used to make the separation? What is the make & model of the modem as Cox brings you?

  Nevertheless, your airport, or pretty much any other wireless router can only a network of 'boost' a single Wi - Fi connection.

• I can read two-channel USB-6008 using THE Signal Express?

  Hello world!!

  Is possible to read the two analog inputs at the same time?

  Example: Using Signal Express, I need to read the (channel 0) analog input and analog input (channel 1) at the same time.

  I try this but, the signal on purpose gives me an error message saying that I can't read several channels at the same time using the USB-6008.

  Is this true?

  Thank you

  Ivo João

  André,

  Grato definition of pela.

  SUA ajuda muito util faith.

  SDS,

  Ivo João

• Two MAXIMUM values

  Hi all
  
  We have a requirement to get two values of max.
  We have a primary key we will admit Quarter_sk we need to extract Max two values of particular condition.
  
  This primary key not sequence.
  
  Select Quarter_sk in the myschema.myTable where max (Quarter_sk) and max but one (Quarter_sk).
  
  Could someone please help me.
  
  Thanks and greetings
  Swetha.

  Hi, Swetha,

  You can try the ROW_NUMBER analytic function, like this:

  WITH  got_rnum     AS
  (
       select      Quarter_sk
       ,     ROW_NUMBER () OVER (ORDER BY Quarter_sk)     AS rnum
       from      myschema.myTable
  )
  SELECT     Quarter_sk
  FROM     got_rnum
  WHERE     rnum     <= 2
  ;
  

  or, if Microstrategy doesn't do WITH clauses:

  SELECT     Quarter_sk
  FROM     (
       select      Quarter_sk
       ,     ROW_NUMBER () OVER (ORDER BY Quarter_sk)     AS rnum
       from      myschema.myTable
       )
  WHERE     rnum     <= 2
  ;
  

  Note that this product exactly 2 rows, which can have the same value of Quarter_sk.
  If you want really two distinct values, replace ROW_NUMBER, DENSE_RANK. In this case, you can SELECT change in the main query to SELECT DISTINCT.

• XSL - distinct values

  Hi Vlad,
  
  I have a problem with the xsl transformation, if a value in the input xml file is same in same/orders multiple, unique values gets added in the same node, in the example below, I have a SKU order '2' with Qty '1' and SKU '4' with '2' quantity, so my csv file will come with 3 lines, 1 line for the lines of CODE '2' and 2 for SKU4. The output seems to add the two distinct values (such as < ns0:quantity_ordered > * 1 2 * < / ns0:quantity_ordered >) in the same node, as shown in the example below. I don't know if I'm a bad button in the Item_Data or something else,
  
  I believe, I do not use good condition to check the separate SKU or by using a condition for each stay, I don't know if that's the problem. I would be grateful if you could tell me the problem.
  
  Thank you
  VINET

  Don't know if is that the first node is 0 or 1 (there is a difference between the implementations)... There the previous does not work, try to replace [0] [1]...

  See you soon,.
  Vlad

• How to get distinct records by using the ListAgg OBIEE report function?

  Hi all

  I get a correct result as mentioned below. But I don't see duplicates in my result here, in my example, I get duplicate for the name of the employee 'Pat '. So how to get Distinct values by using the LISTAGG function?

  Data set of sample with the Department and its employees

  Service employee

  ----------      ----------

  Marketing Michael

  Pat of marketing

  Pat of marketing

  Pat of marketing

  Purchase of Den

  Purchase of Alexander

  Purchase of Shelli

  Purchase of Sigal

  Guy of purchase

  Purchase of Karen

  Using the ListAgg function, we can convert it to:

  Employees of the Department

  -----------     -------------------------------------

  Marketing of Pat, Pat, Pat, Michael

  Purchase of Sigal, Shelli, Karen, Guy, Den, Alexander

  I tried a lot of things, but I'm not able to understand how exactly this can be achieved, if anyone has any idea or suggestions please do share, thanks in advance.

  After much research, I found the solution & I want to share what he finds very useful, we can create SQL logic in the Advanced tab, as below and after you click Rescan, and then you will get your desired results.

  SELECT saw_0, Evaluate_Aggr T1.dept ("ListAgg(%1,'' & '') intra group (about 1%)") ("as long as VarChar (1000), T1.emp) saw_1 FROM)

  SELECT 'emp_dept '. "the Department dept,

  'emp_dept '. "' employee ' emp

  IN THE "DOMAIN".

  GROUP BY dept, emp

  ) T1 GROUP FROM T1.dept ORDER BY saw_0

  Also note here that we have good anti-aliasing for columns parent (ex: saw_0, saw_1), another by mistake oracle bi server.

• Joint of two tables to get null output values

  Hello
  I have two tables with structure and values as shown below.
  
  CREATE TABLE 'OMPODI '. "" DETAIL_RECORD_BUR ".
  (
  'PRCS_DATE' CHAR (8 BYTES),
  'PLANT' FLOAT (4 BYTES),
  "IPC" TANK (6 BYTES),
  'PRODWEEK' CHAR (8 BYTES),
  'QUANTITY' CHAR (9 BYTES)
  )
  
  values
  
  "PRCS_DATE" 'FACTORY' "IPC" 'PRODWEEK', 'AMOUNT '.
  "20120322" "MES2" "75921" "20120305" "000000000"
  "20120322" "MES2" "75921" "20120306" "000000000"
  "20120322" "MES2" "75921" "20120307" "000000000"
  "20120322" "MES2" "79110" "20120324" "000000000"
  "20120322" "MES2" "79110" "20120326" "000000000"
  "20120322" "MES2" "79110" "20120327" "000000000"
  "20120322" "MES2" "79111" "20120313" "000000000"
  "20120322" "MES2" "79111" "20120314" "000000000"
  "20120322" "MES2" "79111" "20120315" "000000000"
  "20120322" "MES2" "79111" "20120316" "000000000"
  "20120322" "MES2" "79111" "20120317" "000000000"
  "20120322" "MES2" "01667" "20120321" "000000000"
  "20120322" "MES2" "01667" "20120322" "000000000"
  "20120322" "MES2" "01667" "20120323" "000000000"
  "20120322" "MES2" "01667" "20120324" "000000000"
  
  And another table
  CREATE TABLE 'OMPODI '. "" DETAIL_RECORD_BUR1 ".
  (
  'PRCS_DATE' CHAR (8 BYTES),
  'PLANT' FLOAT (4 BYTES),
  "IPC" TANK (6 BYTES)
  )
  With values such as
  "PRCS_DATE" 'FACTORY' "IPC".
  "20120322" "MES2" "75921.
  "20120322" "MES2" "79110.
  "20120322" "MES2" "01667.
  
  It has distinct values of the "PRCS_DATE", "PLANT" and "IPC" in the first table.
  
  What I want is to get out as
  
  "PRCS_DATE" 'FACTORY' "IPC" 'PRODWEEK', 'AMOUNT '.
  "20120322" "MES2" "75921" "20120305" "000000000"
  NULL NULL NULL "20120306'"000000000"
  NULL NULL NULL "20120307'"000000000"
  "20120322" "MES2" "79110" "20120324" "000000000"
  NULL NULL NULL "20120326'"000000000"
  NULL NULL NULL "20120327'"000000000"
  NULL NULL NULL "20120313'"000000000"
  NULL NULL NULL "20120314'"000000000"
  NULL NULL NULL "20120315'"000000000"
  NULL NULL NULL "20120316'"000000000"
  NULL NULL NULL "20120317'"000000000"
  "20120322" "MES2" "01667" "20120321" "000000000"
  NULL NULL NULL "20120322'"000000000"
  NULL NULL NULL "20120323'"000000000"
  NULL NULL NULL "20120324'"000000000"
  
  Concept here is to not have that one value for PRCS_DATE, PLANT and CPI and next lines must be NULL instead of them.
  
  How could I achieve this?
  
  You can also use only one table or tables.
  Need SQl for this preference. Thisisto be used to create the text file in ODI.
  
  Published by: MaheshGx on March 27, 2012 10:58

  Like this

  select decode(rno, 1, prcs_date) prcs_date,
         decode(rno, 1, plant) plant,
         decode(rno, 1, ipc) ipc,
         prodweek,
         quantity
    from (
            select t.*, row_number() over(partition by prcs_date, plant, ipc order by prodweek) rno
              from detail_record_bur t
         )
  

• Can LOV check the value in the table and view so absent?

  Hello.
  
  If you have 2 simple tables. One called "Table1", and another table used to fill a LOV called "Table2" can LOV display a list of the missing items in table 1? If so how would that be? Let's say that the LOV table consisted of two fields, a field called 'ID' and a field called 'Document '. The 'Document' field would be the display value and the 'ID' field would be the return value. The first table 'Table 1' would be the value returned by the username returned by V ('APP_USER') and 'ID'.
  
  What would be the SQL to watch 'Table1' and display only the records for V("APP_USER') in the LOV that do not yet exist in 'Table1 '?
  
  Sorry if it sounds simple, but I can't get out.
  
  
  Kind regards
  
  Steve W

  Hi Steve,.

  Steve Welch wrote:
  Sorry if I wasn't clear. Lets say I have 5 documents numbered 1 to 5. The 1,2,3,4,5 and the user that created would be on a line for each. The picture would not infinite because there should be only 5 folders for that user. I can create a query that checks the same number for a user exists in both tables but not it doesn't.

  Looks like that to me, we need to rethink the design of your database. Correct me if I'm wrong...

  Table 1 lists the documents that a user has created, and then you want a LOV to see a list of the documents that the user is still to create. To do this, you need some sort of logic that determines a precise list of the documents that a user must create. This could be done by a table of the required documents and then the list could be created simply by using a set operation, i.e. with a negative statement

  Select annual, required_docs doc_desc
  less
  Select annual, doc_desc from created_docs where created_by =: APP_USER.

  In a well-designed application, it would be a little more sophisticated than that, but I hope you get the idea. As I said earlier, you may need to take a step back and learn a little more about relational database design.

  Concerning
  André

• Can system table space cause multiple data files in several places?

  Hi experts,

  Our current system has a partition to keep the system tablespace data files, but I assumed that the partition is wrongly estimated and the size was maintained only 2 GB. Now the partition's got full and it seems no way to increase the partition from the OS. The only option I have is to create the new data for system tablespace file in another free partition. Is this possible? I have to consider all things important before doing this? Also can I create new data with the regular create command file or need to do something special for system tablespace?

  Thanks in advance

  Yes, you can create two data files for system tablespace into two partitions.

  To reduce the space in the system tablespace - you should check what are segments that occupy the space in the system tablespace.

  To get the examples if you have the Audit DB - then you can move the table to tablespace someother depending on availability.

• Can a pop list cause a dynamic value assigned to him?

  Can a pop list cause a dynamic value assigned to him?
  as Select actualValue, fullname of the category;
  and put fullname in the list of values in the list of POPs and actualValue each of the returned values.

  The following code will help you and set the trigger a times-new-form-instance.

  DECLARE
  rg_name VARCHAR2(40) := 'EMP';
  rg_id RecordGroup;
  errcode NUMBER;
  BEGIN
  
   rg_id := Find_Group( rg_name );
  
   IF not Id_Null(rg_id) THEN
     delete_group(rg_id);
   END IF;
  
   rg_id := Create_Group_from_query(RG_NAME, 'SELECT ename, TO_cHAR(empno) FROM emp');
  
  errcode := Populate_Group( rg_id );
  -- Error occured while populating the record group
  if errcode != 0 then
  message(' Error occured while populating the record group');
  raise form_trigger_failure;
  end if;
  
  -- Clearing the list before populating it.
  clear_list('here you define block column name');
  
  populate_list('here you define block column name',RG_ID);
  
  exception
  when no_data_found then
  null;
  when others then
  null;
  END;   
  

• How to combine two tables: table of origin and its values of interpolation table

  We get a new array of values after using the interpolation on a table function in labview, but how to combine the array of values and this original interpolated set of values in a single table?

  
  

• LOV - Dsiplay distinct values.

  Hello!

  I use JDeveloper version 11.1.1.7.0.

  I have a use case that works for the most part, where when a value 'attribute 1' is activated in a LOV, only those values that are on the same line as the value in the column 'attribute 2' can be selected in the attribute 2 LOV.

  Similar to how you would select only a certain country according to which Continent you had previously selected. This feature works as expected, but I see duplicate entries in the options drop-down list LOV. An example of the SQL is less than the SEPARATE statement used to fill my VO...

  SELECT DISTINCT 
      ATTRIBUTE_1,
                  ATTRIBUTE_2,
                  ATTRIBUTE_3,
                  ATTRIBUTE_4,
                  ATTRIBUTE_5
  FROM ATTRIBUTE_TABLE
  

  I realize that if I run the SQL in SQL Developer column ATTRIBUTE_1 indeed shows several lines in the table, because it must have a value for each row of the other attributes (2-5) above, it is the my LOV in ADF shows Dups, so I undersatnd the problem...

  If I take the attribute and run individually, I'll get my desired distinct attributes...

  SELECT DISTINCT 
       ATTRIBUTE_1
  FROM ATTRIBUTE_TABLE
  

  I see only a single value, which is what I would like, so I could possibly spread all the 5 attributes out to separate VO, but then I don't think I can apply the attribute dependencies, you will only see the corresponding values in LOV to 2 according to your selection of attribute 1 LOV attribute, like all attributes are not in the same SQL statement...

  Can someone advise me on how to realize the two separate values in my LOV and the possibility of having dependent attributes (the same than to see only the countries selected according to a selected continenet previously)

  Thanks in advance for any assistance with this.

  Sincerely, Jamie.

  For reference get dependent attributes, I did the following...

  I created a read-only VO of a SQL statement (as seen above). I then created variables bind to each attribute, as well as a view of criteria.

  I then added the criteria of as an accessor to my primary VO (which serves to fill out a form) and added a LOV for each of the 5 attributes, based on my original VO RO.

  I checked the following threads associated with no luck...

  ADF lov: duplicate values

  With unique values only - LOV swing UI LOVRowSet

  How to create lov attributes no duplicates in adf

  Hi Jamie,

  You don't need PK/FK to create dependent LOV. Simply create a ViewCriteria based on the attribute and filter your LOV accessor accordingly.  For example,.

  VO1->

  1. SELECT DISTINCT
  2. ATTRIBUTE_1
  3. OF ATTRIBUTE_TABLE

  VO2->

  1. SELECT DISTINCT
  2. ATTRIBUTE_1,
  3. ATTRIBUTE_2
  4. OF ATTRIBUTE_TABLE

  VO2 - ViewCriteria-> on ATTRIBUTE_1.

  VO2 - LOV1 on ATTRIBUTE_1 based VO1;

  VO2 - LOV2 on ATTRIBUTE_2 based on VO2 (with applied ViewCriteria ATTRIBUTE_1-based)

  I think this could work.

  Concerning

• How can I access more values wwv_flow.g_fnn of a unique region?

  I have a line for multi multi-region, each page in region where users can update a couple of values in one of the regions before submitting them for further processing.

  I use an apex collection to collect the data that I'm interested in and save ready for further processing, then pulling back as simple collection queries in a separate page.

  Specifically, it is something of 1 to 4 regions, under certain conditions (based on the number of distinct values are picked on a collection page, up to 4 simultaneously) each of them for a number of different parts, with each region being stores where part numbers are known that content will be organized, the quantities available at each location.

  The problem is, using more than 1 region, it seems that the values in the wwv_flow.g_fnn elements are available only for the last region questioned on the page.  I have to be able to return to the values of page for all 4 regions for comparison with the collection that they were chosen in upon entry to the page in to detect all changed user values (say, the user only wants to choose 5 of the 10 available in a location).

  The user sees the list of parts and quantities and locations of stores and makes the changes that I want to publish on the collection, do some validation (not necessarily in that order), and then call an update batch using the name of the collection as a key, to ensure that all or nothing, the updates occur.

  All of the examples I can find online seem to be for a page report 'region '.

  I suspect that the answer may be to create a report of disruption, so it's all in one region (which is is as a compromise) or to publish a second book of the second page of what that page looks like when the user hits submit and do the audits through collection 2 LESS treatment of collections 1 , or some other thing, but before I try it, I thought I'd see if someone has already solved it.

  Thanks for the pointers,

  Mark

  Mark_B_1123581321 wrote:

  I understand that I'm going to need more than 1 set of table with 1 set by region, but I was hoping I could find a way to deal with each in turn under the existing features.  Looks like the Apex can be simply reuse the same set of unique table whenever it renders a new region

  This is the case. APEX does support a tabular presentation (i.e. report classic region with the value column attributes display form controls + post ApplyMRU and ApplyMRD submit process) per page. There is therefore no way to specify to what results table corresponds to controls in a column or table set offsets for each region/report form.

  I just hoped that I could perhaps define the static region id in an API call, and then find that my references to values of apex_application.g_fnn have been miraculously pointing to the values of this region.

  Not possible, but you can create a feature request for it.

  In fact, in my case, we are limited to only 4 lines per region, will not go beyond 16 ranks.  And column wise, I don't need to go beyond c016, so this isn't a problem.

  I think I have to go on the road to javascript, which I suppose seems appropriate anyway.

  Is only 16 columns for the entire page or by related? According to the report is a problem: 4 * 16 = 64 > 50.

  If it is 16 for the page, then convert reports to generate the form using apex_item to specify the table for each column would be probably faster.

• OPV with distinct values for the guests

  Hi all

  Could you get it someone please let me know where/what I'm wrong. I created the couple of OPV to get distinct values, as I can't use the view that has millions of data to load guests.

  These OPV is not directly attached to my main table but joined someother tables; After you add the guests in the responses, is to show the below error

  [nQSError: 14070] can't find coverage source logical table to the columns of the logic: [bp Manager]. Please check more detailed level keys are correctly mapped. (HY000)

  I wan to the OPV use only for guests and pass the values to help requested on the main table filters

  I have no warnings/errors in my model. What could be the problem? Thank you for your time

  REDA

  Just go with PSV.

  Check it cool - bi.com for "what happens when we select all the column values.

  Table x got to join the only 1OPV then how can you expect comes from BI to the other 2 open-pollinated varieties? Likewise, we cannot write query!

  If you can create a domain for each OPV then proceed with a command prompt with the UNION of 3 open-pollinated varieties clause