a threat detection

Similar Questions

• How to deal with these multiple threats detections, I do not know how to get rid of them. I tried with AVG. but don't know how

  what I do with these multiple threats detection there are 5 now, I tried to go down with them in my avg but, has not in any way. Could you help me.

  now my computer sounds rather well, you think it will be fine now.

  Carolyn, is there anything else I need to do

  Hello

  1. were you able to remove the virus?

  If you were able to remove the virus from your computer, then you might worry.

  I also suggest you to download and run the latest Microsoft Scanner on your computer and check to see if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

• Duration Shun threat detection order

  I'm trying to set the time of shun for the detection of threats on a PIX 525 v8.0 (3) running. According to the documentation if a host is considered as a striker he will shun the IP for 3600 seconds by default. What I see is that shun is never be removed after they are shunned. I would like to set the time of shun myself and the PIX does not recognize the command:

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/protect.html#wp1065813

  ####################

  Step 2 (optional) to set the time of the shun to attack hosts, enter the following command:

  HostName (config) #-a shun threat analysis threat detection seconds duration

  ##############################

  PIX (config) #-a shun threat analysis threat detection?

  set up the mode commands/options:

  except the keyword to exclude the hosts specified in being shunned

  Has anyone seen this?

  Hutch

  Ahh, I understand now. Given that you have posted on the Forum ID I was confused and thought he was the block/Shun IDS system.

  I deal a lot with ASA/Pix Firewall features. But I checked the 8.0 (4) Release Notes and the option 'shun period' is a new feature in 8.0 (4) which explains why he is not in 8.0 (3). Upgrades to 8.0 (4) an option for you?

  I don't know why it isn't remove avoids it automatically after 3600 seconds in 8.0 (3). I did a quick bug control and could not find one.

  I hope that someone else on the list might be able to help.

  If this isn't the case, you might try posting this question on the Forum of NetPro firewall, or even by contacting the TAC.

• Completely disable the Cisco ASA threat detection

  Hi all

  On a Cisco ASA5510, Version 8.2 (1) with ADSM v. 6.2 (1) we have this threat detection because we like to allow all traffic through at this time:

  capture.gif

  

  Wouldn't be fair to assume that this setting blocks any traffic that might normally be considered to be a threat? We assume that the setting 'Enable parsing' verified by himself just analyze traffic but takes no action.

  Yes you are right. Not all IP block until you have the keyword "flee".

  Thank you and best regards,

  Maryse Amrodia

• LR4.1 install RC2 - activities threat detected by Norton Internet Security

  I just installed LR4.1 RC2 and NIS detected and quarantined two DLLs:

  mc_dec_mpa.dll

  mc_enc_dv.dll

  What are and is it safe to take these off quarantine?

  Double click to see full-size:

  

  They are false positives due to the heuristic of Norton. They are safe to remove the quarantine. In fact, if you do not have your video will not work properly.  Has been mentioned in the notes releae LR: http://blogs.adobe.com/lightroomjournal/2012/03/lightroom-4-0-now-available.html

• Threat detected in Google Chrome?

  I already know the pop-up message is a total scam, but I was redirected to "shutmac.info" what force feeds me a warning to call a toll-free number. It won't let me leave the page. I tried closing and reopening the browser, hoping to close the malicious tab in time. Don't go to this site. In any case, unlike Safari I don't see a way to clean my story outside of the Chrome browser. Is there a way around this problem without restarting? I have many, many favorites unsynchronized.

  Edit: I backed up my iPad and then restored from this backup. I don't know why this has helped, but it allowed me to close the tab before starting the popup appeared. I would like to know if there is an easier way to go about it.

  Unfortunately with the Google App, you can only erase history within the app itself and if the popup does not, it is not that you can do about it. You can remove the App and reinstall it, easier than a restoration, but at the expense of the start.

  An alternative, however, is forcing Google close completely from the multitasking window by double clicking the Home button and slide up the Google preview pane until it disappears from the display. You may need to search the component covering scribbles to the left. This will close the application but if pop gave rise to a cookie on your story, it will always be there...  Perhaps you could then delete the history. Worth a try next time, perhaps.

• Norton won't let me update minefields "threat detected" how to solve this problem?

  I'm not able to update the fields of mines, Norton (from Symantec) will delete the following: updater.exe

  This has happened

  Each time Firefox opened

  Each update

  User Agent

  Mozilla/5.0 (Windows; U; Windows NT 6.1; WOW64; en-US; RV:1.9.3a5pre) Gecko/20100506/Minefield 3.7a5pre

  Thank you disease, it worked.

• Detection of threats - Cisco ASA

  Afternoon,

  I'm trying to understand how the threat detection feature prevents attackers. From my understanding, taking into account the line configuration below, if a host had to send 45 SYN in 1 second, then it would be recorded as a threat and thus avoided the host - thus negating any other communication, whether it is legitimate or not.

  threat-detection rate syn-attack rate-interval 600 average-rate 30 burst-rate 45     

  Take this example to the review, I have a few questions.

  1. It's shun entry stored in some sort of table of shun?

  2. In what order the package is processed on arrival? He is compared to those existing avoids before it hits ACL, NAT and so on?

  3. This entry of shun there a time-out or duration of life, where, after a certain period of time the shun is revoked?

  4. Are disabled with a reload Shun or they persist until that of the means of manual compensation?

  5. Without taking into account all of the above - leaking just for the unique SYN that strikes the burst rate, or they apply to any other communication attempted to this port and address from the source?

  Thanks in advance for your help.

  Kind regards

  Luke

  
  Please rate helpful posts and mark correct answers.
  

  Hi Luke,.

  1 - Yes, there is a table of shun.

  Use the command show - shun threat detection to display a complete list of attackers who were rejected by detecting threats specifically. Use the show shuncommand to display a list of all IP addresses that are actively be shunned by the ASA (including from sources other than the detection of threats).

  2 years - Yes the package is first checked Shuns.

  years.3, 4 and 5 -:-answer is below

  Shun control allows you to block connections from a host of attacking. All future connections of the source IP address are fallen and recorded until the blocking feature is removed manually or by the Cisco IPS sensor. Blocking of the shun command is applied or not a connection to the specified host address is currently active.

  If you specify the destination address, source and destination ports and Protocol, then you drop the correspondent connection as well as placing a shun on all future connections to the IP address of source; all future connections are educated, not just those that match these specific connection parameters.

  You can have an order by source IP address of shun.

  Because the shun command is used to block attacks in a dynamic way, it is not displayed in the configuration of the SAA.

  Whenever a configuration of the interface is removed, all fled attached to this interface are also deleted. If you add a new interface or replace the same interface (using the same name), and then you must add this interface to the IPS sensor if you want the IPS sensor to monitor this interface.

  Dubey, Shivam

• a window opens but is empty

  When I try to open Firefox, a window opens but it is all black with a green stripe at the top. No toolbar or the controls are visible to reduce, max or close other then. Uninstalling and reinstalling firefox did nothing. System Restore did nothing. I still have access to the internet using another browser, but I never use firefox and hope I can get it back! I've also tried going to start firefox.exe - p, but that box pop up is too just black. I ran my Norton full scan & it says no threat detected. I am at a loss. Any help will be greatly appreciated!

  Hi, here is a how-to by intel for know that you are using: http://www.intel.com/support/graphics/sb/cs-009482.htm

• AVG Kit warns randomly warns operating Blackhole exploit

  From a few weeks ago and that coincident with no change update or addon Firefox, AVG starts giving intermittent threat detection alerts, identical.

  All alerts that say the same thing:
  file: www.laseroffers.com/feed/
  infection: feat Blackhole exploit Kit (type 2170)

  If I open firefox, I get one of these every 15 minutes or more.

  I have scanned for viruses and malware, cleared the cache, rebooted, disabled all addons and reinstalled firefox. Interestingly, after that I reinstalled it, there was a short pause, maybe an hour, until the warnings started coming again. Warnings occur when I visit sites that I know are clean. Yahoo, Amazon, simple html sites, etc.

  I'd really like to find a way to solve this problem. I want my back Firefox!

  It's a live RSS feed item.

  Have you checked the bookmarks to see if you have not bookmarked the URL?

  Do a check with some malware malware, analysis of programs on the Windows computer.
  
  You need to scan with all programs, because each program detects a different malicious program.
  
  Make sure that you update each program to get the latest version of their databases before scanning.

  • http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
  • http://www.superantispyware.com/ - SuperAntispyware
  • http://www.microsoft.com/security/scanner/en-us/default.aspx - scan Microsoft Security
  • http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
  • http://www.safer-networking.org/en/index.html - Spybot Search & Destroy

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • http://support.Kaspersky.com/viruses/solutions?QID=208280684

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

• I get "HTTP 400 error. The request is malformed. "When you try to access a URL that I consulted earlier in the day and works OK with IE.

  Hello
  I accessed the site earlier in the day, but when I came back to it I got the above message. Tried to access the site in IE and all worked well. Tried to disable DNS prefetch and erase history, but nothing helped. I did a virus scan but no threat detected.

  This problem may be caused by corrupted cookies.

  • http://KB.mozillazine.org/cookies

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

• How to remove adware for mac?

  Hello! I have problems with what seems to be adware/malware on my Macbook Pro Retina Display. Thus, from a few days ago, Avast (my current antivirus software) has been giving me advice below:

  

  With various different sites in the part of the URL. According to a suggestion in another post on the forum, my fiancée and I installed MacScan on my laptop and ran a full scan of the system. He accused that I have two pieces of adware on my computer. To try to get rid of adware, I installed Malwarebytes. As expected, he said that I had two infections (both same referenced in my MacScan) and gave me the option to clean my computer. I did, and, during the execution of a second analysis, Malewarebytes claimed that I had more infections.

  My question is that, in order to verify a second time, I ran another MacScan and he said that the two pieces of adware still exist. However, their codes now changed to say: /. Trash/Malewarebytes removals.

  Here's the complete code for reference:

  Path:

  /. MobileBackups/computer/2016-04-02-153847/Volume/users/mariyaartis /. Trash/Malwa Removals/Sponsors.framework/Versions/A/Resources/APNSetup.app/Contents/Resources/ [email protected]as rebytes

  Path:

  /. MobileBackups/computer/2016-04-02-153847/Volume/users/mariyaartis /. Trash/Malwa rebytes Removals/Sponsors.framework/Versions/A/Resources/APNSetup.app/Contents/Resource s/searchAskApp_ORJ - M.safariextz

  According to a few minutes ago, I always get the opinion of Avast threat detection. How to remove malware from my computer? What should I do at this point? Any help is greatly appreciated.

  Malwarebytes is perhaps the only adware scanner you need

  I'd MacScan and Avast-

  Linc Davis calls it the "worst of the miserable anti antivirus market for mac software.

• Help out me?

  Hello everyoney...

  In fact I was browsing opera on my iphone 4S if suddenly I got a message saying the potential threat detection: Beware your apple device can have viruses adware or spyware call support technique apple + 1 - 800-*-9581 immediately for help on how to remove the virus. The data is at risk, etc.

  I just wanted to know is - this message is authentic or not? And do I have to take a step to chk on weather my iphone is on rist or not and what do I do now?

  < image edited by host to remove personal information >

  This is a scam - do not follow its instructions

  Press the home button twice
  Slide up and 'killed' the Safari session

  Then go to settings - Safari - claire historic site and cache - then add this site to the list of websites blocked on your phone

  You should be fine

• My HP Pavilion Notebook has questions

  Recently, I turned off my PC then started to connect, once I had entered my password that the PC got stuck on the part "Welcome" (this is the first time, it has happened and that happened for two hours). I recently got this PC not a month ago. Before I shut down my PC I was do pop ups and asked to rate sites Web etc, I noticed that it seemed to be a virus but when I scanned it, no viruses were found. The only issues with my PC are internet and my trying to connect. I would be extremely grateful for the help please.

  Hi annanurdock4045
  
  peerone suggested its probably of malware, adware, Trojans etc.
  What antivirus do you use?
  I suggest you download following the latest software of their authentic sites: malwarebytes 1) free version - scan completely & remedy in threat analysis, 2) adwcleaner - run the download file n do a complete scan n remove all found threats, 3) trend housecall - a full scan (may take several hours depending on the size of the hard drive (, mine took 6 hours) & delete or correct any threat detected.
  
  After all this rebooting your system, download CCleaner on their website, install it do a full scan... do not change the settings. Click on correct after the scan.
  
  Restart scan with some another antivirus online scanner again, opt for trend housecall new scan online eset, do the download, install... sweep remove n or difficulty threats detected, if any. That's all.
  After all this, better do you windows defender after analysis to date for confirmation.
  
  post your results of the analysis... If you have found any threats in any of the scans after each of them,
  If it is a Trojan or a virus, you may need to restore your system to a previously affected State.
  
  Thank you
  
  Visruth

• Upgrade Touchsmart 600 for 3 to 4

  I lost my files and the link to the forum their going to a "not found". I am running Windows7 64 bit. Where can I download them?

  Hello

  You should also read this thread started by Forum memberGeekTieGuywho is an employee of HP.

  Read the blog of GeekTieGuy.  There is a tutorial on the upgrade. This link works. Google Chrome warns of a possible threat.   I scanned (4.55 MB) software that I downloaded from the link with ESET Smart Security 6, resulting in no threat detected.

  

  Best regards

  ERICO