A user interface custom: select a resource, same metric graph

Similar Questions

• User interface customized to run at the same time?

  Hello

  My question is about the user interfaces customized for performances with the parallel model. In my current project, we use the parallel model with sockets to the UI and test 4, we have flags of chain for its execution, which displays messages to the user and the other 2 which has the function of a streaming indicator that displays information throughout the test, also showing instances of time. So, in total 8 indicators that display information about the 4 independent runs alongside. Up to now, I managed to create the user interface only for the sequential mode, using 2 simple string indicators and sending messages to the TestStand to the strings through the user interface Messages. My problem is that I don't know how to implement this feature for the sockets to test more.

  Attached images of the façade and the diagram of blog of the GUI as it appears now.

  I am very new to TestStand (I know that for the last month), so I expect that my question and description of cases are not so clear, so please let me know if anything is badly explained.

  I would be grateful for any help.

  Basically, whenever you get a message from UI associated with running (e.g. UIMsg_StartExecution, UIMsg_Trace, etc.), you will need to determine what testsocket the UIMessage applies to and then update the corresponding user interface controls. A way to get the testsocket is as follows:

  testsocketindex = uimsg. Thread.GetSequenceContext (0, frameId_Notused). AsPropertyObject(). GetValNumber ("RunState.TestSockets.MyIndex", 0)

  In addition, once you know where to go a particular run, you can attach to the control Id of this execution (i.e. property of Execution.Id) and just look at the execution Id instead.

  Hope this helps,

  -Doug

• Display success or failure of the images only in the user interface custom

  I built a user interface customized to my project VBAI 2010 that displays 2 images from 2 different cameras.  I want to have the "View menu" available for an operator to choose between images, only passed, only having failed, etc.  The view menu is using the default user interface, but when I build a custom one from one of the templates, this option is no longer available.  How can I get the view menu to show up?  If I can't do it, is there a good work around for this?

  This is the VI amended with an additional option for any display puts is not up to date.

  If you do advanced UIS Custom like this, you should definitely check out LabVIEW. You can even install it for evaluation to try... later, when you're not on the customer site

  Hope this helps,

  Brad

• user interface customized with VI does not

  Hello

  I tried to use a user interface customized for VBAI using VI. I got to the point where I can run the VI all by himself and to see the work of logic. However when I add to as part of the user interface and switch to the inspection mode and run it, it does nothing. Let me know if I'm doing something wrong. Attached you will find the program, I work with.

  Thank you.

  I just tried your VI... you must have a VI that does not forever in a loop. You can use some time recording the loop that runs once and uses the SHIFT to follow the previous results of previous runs of the step. Use of the is the first call? Primitive in LV to initialize the first shift register. Here is a modified Test.vi that will work better.

• User interface customized to human interaction for 11g OBPM process

  Hi all
  
  How to have a custom user interface for interacting with business process when you use OBPM 11 g? Process, that I'm looking pretty heavy human interactions (data entry, manipulation, approvals) and user can come and go several times. Is it must to use out of the box BPM process workspace (or guided activity) for human interactions (with customizations)? Or is it possible to apply the user interface layer separately?
  
  Thanks in advance for the answers / pointers.
  
  Kind regards
  Valérie

  Docs to create the custom using ADF task form are here: http://download.oracle.com/docs/cd/E17904_01/integration.1111/e10224/bp_designtf.htm#BDCFBJIE

  It is "possible" to build an independent user interface layer that interacts with the process through the events of beginning of message and the messages defined in the event sub-process. However, in most cases, the interactions available through integration with the human tasks are sufficient.

• I installed the last 7.2.2 (33) pre update pro but my user interface still looks like the same thing?

  He said I have the upgrade, but nothing has changed in my user interface.  I did something wrong?

  Do you think the new version in the help | On?

• Is there an add-on that has the page with a user interface, just the content. Same view F11, but in a minimized state

  I use the always on the top of the page Add on and minimizes a window for watching videos while doing other things.
  But the Web bar and the tab bar allows plenty of space, so I was wondering if someone knows a plugin that will hide all the UI and simply let the content, something like view full-screen, presing F11, but in a reduced state.

  Thank you

  Try to use this extension.
  https://addons.Mozilla.org/en-us/Firefox/addon/custom-geometry/

  When you set up this extension, you will need to play with the Options through the add-on Manager tab and adjust the width, height, left and Top according to your needs. If you do not have a huge super resolution monitor default settings in CG will place the Firefox window on the right side of the screen.

  Once you get all of these parameters, move the toolbar toolbar button. When you press F11 this window will go into mode full screen expanded, then move the slider to the top of the screen to reveal the toolbars and click on the custom button geometry to restore your custom window size and position. Then this window snap into place and the toolbars will hide again. YMMV

  Note: Custom geometry has never been [IMO] adequate updated for Firefox 4 and the drop-down toolbar button does not work and adds it to the width of the toolbar button.

• Graph XY on the custom user Interface

  Hello.  I'm kinda stuck (or really stuck ).  In any case, I'm newbie.  That being said, I've had a few really good help on how to pass table through the postuimessage (xparamdata) of teststand to my user interface customized a few weeks ago.  It really helped.  Thanks again.  However, I'm still another question.  I'm moving a container of teststand.  The container or the cluster of table and table x of y in a XY Chart.  I pass to my custom IO and try to update a chart XY on my IO.  I tried to use the same code that I used for a table, but it does not work... of course.  I just need a little help to find out how to get this update on my graph XY on my IO.  The attached photo, this is what I have so far, but it is not close to work.  Can someone give me some advice?

  String of BTW - looking for you wouldn't array1 and array2.  It would be the names of the tables in your cluster.  In TestStand search strings are the relative path to the object of the referenced property.  In this case your container is referenced from which is the name of your berries.

  Hope that makes sense.

• Customization of the insertion in a custom user interface palette

  Greetings,

  I am working on a custom for Teststand application user interface and I want to give the user the ability to edit files in sequence using a simplified subset of the predefined types step.  I based user interface custom off the Labview FullOI example in the teststand 4.2 folder.

  I found the context menu item 'Customize' out of the palette of insertion and who seems to get most of what I'm looking for (hiding like IVI and synchronization of files and the individual steps as the FTP files and call executable), but what I really want to know, is if I can remove it to the different symbols of 'top' that choose between adapters.  I wish that the customer must only see Labview and none and RID where hide the CVI, C/C++ DLL, .NET and ActiveX.

  Where, moreover, are the options that you set in the menu customize stored user interface custom compared to the sequence editor own right?  I want to make sure that I have a good list of all of my modified files I create a CD of deployment of work later on the road.  I'm assuming that to change the visible categories in the interface custom user won't change their visibility in the application of the sequence editor.

  Personalization step insert palette changes affect the sequence editor and the user interface. The settings are stored in testexec.ini in the cfg directory.

  You can hide the adapters using the card configuration window in the config menu

  You can simply keep separate versions of your testexec.ini, one for when you want the customizations and the other for when you don't have, assuming that you do not use the machine even for both. If you use the same machine for both you can implement some sort of automated way of switching on which version of the file that you are using.

  Hope this helps,

  -Doug

• No custom user interface design

  Hi all.

  My plugin requires some things from design to the model, including circles, lines, and (hopefully) text. However they are * not * part of a user interface custom - in other words, they can remain on the screen during a RAM Preview, for example.

  I tried using Drawbot, but I don't know that I can use for this purpose, the reason being how to make a drawing ref using suites. EffectCustomUISuite1()-> PF_GetDrawingReference() without a context (which looks like to the context is passed as part of a UI event, which I won't)?

  I already wrote a lot of code to draw pixels directly to the screen, which works very well so far, and I can go ahead and write functions to draw shapes using this method; I was just wondering if I'm supposed to use Drawbot for drawing UI no, or if "roll your own" is the way to go here.

  Thank you

  Christian

  Hey christian.

  It is not too complicated. Let's give it a go.

  Basically, AE doesn't know, or he care what how you fill the output buffer.

  especially is not a question of AE, but rather a BONE drawing tools question.

  the only part which concerns the AE API is the part where you copy your results into the output buffer. (we shall return), since you can use BONE on BONE contexts of drawing of drawing tools, it's exactly what we'll do.

  during the call to render, you start the process by creating a new bitmap drawing context (I'll demonstrate on quartz. you will get the general idea). You'll probably want to create the same output of the plug-in buffer size. It is up to you.

  allocation of memory for the graphics context using the suite of memory and use this handle memory with CGBitmapContextCreate(). (research of some code samples there periferial things to do)

  now that you have a buffer of graphics os, you can start to draw.

  CGContextShowTextAtPoint() draws a string

  CGContextDrawPath()'s going to draw a line, ect...

  so.

  Now you have a buffer of graphics os invisible filled with goodies that you want to copy into the output buffer.

  How do you do that?

  Well, remember this handle memory, that we mentioned earlier?

  It now contains the filled buffer, you have just drawn in. it's how to get the base address for the graphical operating system.

  osBufferBaseAddress = suites. HandleSuite1()-> host_lock_handle (osBufferMemHandle);

  Take a look at the example of CCU (in the function of rendering) to see how to access the output directly buffer in RAM and it is advisable.

  Just copy the value of each pixel of the context to the output during the pointer pixel buffer. (it's all there in the sample of CCU)

  Once the copy is complete, get rid of the context, to free memory, and you are finished.

  questions?

  None?

  good.

  :-)

• Best way to show the user interface elements

  I'm developing a plugin in which I want the user to be able to put on a mask. I would like to offer regular access to layer masks, but I would also like to be able to define the type of mask 'ellipse' or 'rectangle', similar to the red giant Colorista, for example.

  What then is the best way to make these masks? Should I make it myself and apply them directly on the pixels of the layer? Or is there some sort of overlay UI that I can use? I would like the user to be able to click on the layer and drag the rectangle to scale, for example. What is a nice way to do it?

  in my opinion, the best way (as far as the user experience is concerned) is to use a custom user interface and not to make the mask as part of the image.

  If you return the interface as part of the image, it will be affected by the following effects and displays the channel, will be limited to the size of the layer, and will force a new rendering whenever you want to show/hide the interface.

  In addition, so that the interface is interactive, you must use a custom user interface, otherwise AE will not tell you when and where the user has clicked on the chassis.

  a cutom UI will be a much more elegant solution in regard to these problems.

  Why only regarding these problems?

  because managing a custom user interface is a significant headache.

  on behalf of all those who have developed user interfaces customized for AE plug-ins, welcome to hell...

  see the example of the CCU in the SDK.

  It creates a simple interactive interface in the compose window.

  This would be an excellent starting point for what you are looking for.

• UIMsg_BreakOnRunTimeError of completely custom user interface management

  I develop a completely custom user interface for TestStand 2012 SP1 operator (without ActiveX / ApplicationMgr etc.;) "I know, I know...).  I'm trying UIMsg_BreakOnRunTimeError to deal appropriately and need advice.

  (1) my first question is what I call DisplayRunTimeErrorDialogEx() with the appropriate SequenceContext, but the dialog box disables many of the options. Under manage common error, recovery, ignore and abandon immediately (without cleaning) are grayed out (disabled) as well as the box jump of. With the same sequence SequenceEditor and the po sample UI display correctly this dialog box.  Any ideas on what is the cause?

  

  (2) Secondly, the best way to manage the selections to the user?  dontShowAgainForExecution, dontShowAgainForBatchand suspendExecution seem quite simple documentation.  i.e.

  If (dontShowAgainForExecution)
  
      execution. RTEOptionForThisExecution = RTEOptions.RTEOption_Continue;
  
  If (dontShowAgainForBatch)
  
      thread. SetBatchRTEOption (RTEOptions.RTEOption_Continue);
  If (suspendExecution is false)
  
      execution. RESUME(); Fix? Execution seems already paused. What to do if this value is true?

  Now what about the runTimeErrorAction?  I guess for RTEOption_Abort the word execution of . Abort().  What are the appropriate steps to RTEOption_Continue, RTEOption_Ignore, RTEOption_Retry, & RTEOption_ShowDialog?

  (3) Finally, once the dialog box is closed, my execution ends with the result success rather than error state.  What happens here?

  Your help is appreciated as always,

  -Terrence Jones

  (1) this is probably the user privileges, you may either not connected with user at all or the user has privileges to debug. If you do not use the users, you can disable the privilege check in the options of the station.

  (2) something like this:

  void ApplyRTESetting (TS:equenceContextPtr sequenceContext, TS::RTEOptions rteOption, bool breakExecution)
  {
  Thread TS::ThreadPtr = sequenceContext-> thread;
  Execution TS::ExecutionPtr = sequenceContext-> run;

  Switch (rteOption)
  {
  case TS::RTEOption_ShowDialog:
  case TS::RTEOption_Continue:
  case TS::RTEOption_Abort:
  wire-> ClearTemporaryBreakpoint();
  break;
  by default:
  break;
  }
      
  do action according to the selected option
  Switch (rteOption)
  {
  case TS::RTEOption_Retry:
  sequenceContext-> NextStepIndex is sequenceContext-> StepIndex;.
  wire-> ClearCurrentRTE();
  If (! breakExecution)
  execution-> Resume();
  break;
  case TS::RTEOption_Continue:
  If (! breakExecution)
  execution-> Resume();
  break;
  case TS::RTEOption_Ignore:
  wire-> ClearCurrentRTE();
  If (! breakExecution)
  execution-> Resume();
  break;
  case TS::RTEOption_Abort:
  execution-> Abort();
  break;
  }
  }

  Also for the two other parameters we generally use the rteoption of the dialog rather than continue to hardcode, but you can do this job, how you want if you prefer different behavior:

  Example:

  If (dontShowAgainForExecution)
  context-> run-> RTEOptionForThisExecution = rteOption;
          
  If (dontShowAgainForBatch)
  context-> thread-> SetBatchRTEOption (rteOption);

  (3) maybe you call ClearCurrentRTE() to ignore alternatives.

  Hope this helps,

  -Doug

• Determine the maximum use of the processor for a virtual computer in the custom user interface

  I want to determine the maximum use of the processor for a virtual computer in the custom user interface.  How can I do this?

  If I use a supermetric, there is no kind of attribute under CPU called "maximum use.

  Certainly, you get points for a long question! Although to be fair, it's probably my fault to feed you so much information to digest at once.

  1. I would say you can do two ways visually. Use the operations > detail view for 'normal ranges' use the upper limit of the normal range as your typical max. You want an absolute peak, add the metric of a graph or observe that highlight high and low watermarks.

  2. There are a lot of ways to display data, but if you want to display a single metric over a period of time, we could use the following widgets [on top of my head]:

  Top - N analysis

  Weather map

  Analysis of distribution of data

  Among these, I think of your desire for a "peak". Who you want real value, which eliminates the weather map. Then, I think that the concept of a 'Summit' and what is the best thing, I think that the 95th percentile... then I came with the widget of data distribution. The decision is ultimately yours given your particular use case.

  3. you can have it apply to several virtual machines - it's just a widget capable of being an independent provider or receiving widget (metrics, DO NOT choose to select resources). Each resource/metric will add to the widget and you can remove them if you like after it is added. You can certainly all the time you visit... It is date and time standard options you have in all the other widgets chart. With the widget data distribution, you want as much time as possible to get an accurate histogram of the cycles of workload.

  4. This is similar to the question above. You can certainly add parameters of individual resource or a DM that summarizes or AVG groups of resources. And as above, the delay is configurable, along with the other graph widgets.

  5. it's part of Q4 - you can sumN or avgN up to any number of resources with a SM, then discovers that SM in the widget of data distribution. When I said container, I mean an application, group resource pool... all that acts as a container parent within the vCOps.

  6. that's correct, SMs calc using data collected last points... aka single period of time. When you are referring to the longest period, I gave you a few examples of the attributes that are composed of several periods of time which are calculated and created by the adapter for VMware vCenter behvaior. In this case, you have the GVA 15 min CPU 1.5; These specific simple mobile GVA can be specific OR a copy using SMs. Next, you will have the chance is to find a way to distribute what you need through a widget [at that time].

  7. the distribution of data is not for export, it is for Visual functions. If you want the data in CSV, just use a typical chart of metrics and export to a csv and calc your own pics, avg, 95th, whatever.

  8. This is a bit of a mix of all your questions, put in place.

  You are right, if you added those 3 VMs, then calc was the 95th of the AVG. Like Q7, you would not export the data of the distribution of data because the raw data points are not - you do not pass the metric to a metric graphics standard and export via csv.

  Take advantage of...

• custom user interface will not close

  Hello

  I have created a custom UI TS, based on the graphic interface delivered simple TS. When I close the user interface, the process remains in the list of windows processes, I can put an end from the windows Task Manager. This only happens if the adapter of LabVIEW is set to Run-Tiime engine. If I select the LabVIEW development system, the GUI will be entirely closed.

  TestStand 2014 32 bit

  LabVIEW 2014 32 bit

  Windows 7 Enterprise 64-bit

  any idea?

  Hi Madottati,

  the first thing that comes to mind is to close the process programmatically as you do in LV, when you build an executable file. An example how to do this is shown here:

  Work with the TestStand Simple User Interface - (2013 and previous TestStand) LabVIEW - National Instruments
  http://www.NI.com/white-paper/14376/en/

  you want to look at the section 'shutting down '.

  I hope this helps!

• creating the table in the custom user interface

  Hello

  I am trying to create a table of revenue as part of my custom in VBAI user interface. I have attached a code example of the with few variables. I wonder if there is a way to do the same thing without VBAI throw an exception that it cannot have dependencies. Please throw your entries.

  Thank you.

  I have attached a few changes 2 Untitled. VI (updated the connector pane) and custom UI VI and a simple inspection (be sure to check the status of cleanup to see how ref VI is closed). I hope this helps.