A virus makes shortcuts automatically in the USB

Similar Questions

• Upstream 13: make a copy of the USB of computer image 13 Stream

  It has come to my attention that the image USB copy that I compiled may not be usable as a way to reinstall windows 8.1?
  I learned that the Scandisc USB flash drives which I used are not designed as a way of copying and for the resettlement of same OS if the disk image I can say copied ok. This has now been confirmed by Scandisc. The question is now how do I make use of the unique copy of my computer image I have on my flash Scandisc disc and what USB memory keys are designed to provide a useful computer image copy?
  I hope someone can advise me on this.

  First of all, make sure that you start from the USB port. On the portable stream you constantly hit the ESC key when you turn it on to bring up the BIOS Menu in the upper left of the screen. Choose Boot Options then choose USB Flash Drive and it will boot to a screen that says select your keyboard type.

  On mine US is by default I chose that.

  Now, click on the button problems. Click Reset your PC.

  Select the target operating system. Windows 8.1 should be there. If it says Windows 10 and you want to come back to win 8.1 choose it anyway.

  Then, after clicking on the target operating system you will see a screen that says: 'This is what will happen', click Next, and then click YES, repartition the disks.

  Make sure you choose the option in the final stage, which said just delete my files. Do not select the option completely clean.

  Wait 45 minutes and your system is restored from the factory.

• USB Wizard will not automatically install the usb/flash drives

  Hello

  Working on a laptop, I have a strange problem. Insertion of a usb device (disks hard usb flash are all that I tested) opens the new hardware Installation Wizard.
  If I choose "Install the software automatically", the wizard still fails. If I select "Install from a list or specific location", then choose as location c:\windows\inf, it still works. The wizard should not be checking this place on its own?
  Things I've tried:
  -Reinstall the USB devices in Device Manager
  -Microsoft Fix it 50052
  Gateway, MX6441 laptop
  Windows MCE
  Service Pack 3
  All the important updates installed
  Any ideas would be appreciated.
  Rick

  Hello

  It seems that Windows loses somehow USBSTOR.xxx files in the C:\Windows\INF folder. You can simply copy them from (C:\Windows\System32\DriverStore\FileRepository\usbstor.inf_x86_neutral_83027f5d5b2468d3) to C:\Windows\INF, and that might solve the problem.

• Virus deleted shortcuts and ALL the icons

  I have a virus which has removed all the icons and shortcuts from: 'Office', 'Start Menu' and 'Windows Explorer '. It seems that he has deleted all the hard drive but the files are still on the hard drive. The problem is that I have not ALL icons. I ve got rid of the virus, but now if I want to run a program I have to go on the hard drive and find out where the .exe file is on your hard drive. Do you know how can I restore or create the icons back?

  Hello

  Follow the steps in the article below to create the desktop icons.
  
  http://Windows.Microsoft.com/en-us/Windows7/add-or-delete-desktop-icons

  You can also download and run the Fixit tool from the link below to fix the problem.

  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

• Have videos on computer with Windows Movie Maker and transferred to the USB...

  Now I can't watch the videos on any computer or tv with the exception of my own computer and when I try to save in another program there is no other options in the drop-down menu or WMM.  I'm stuck in WWM and can't get out... why?

  Now I can't watch the videos on any computer or tv with the exception of my own computer and when I try to save in another program there is no other options in the drop-down menu or WMM.  I'm stuck in WWM and can't get out... why?

  ===========================================
  What is the format (extension) of these files?

  If the extension WLMP project only files are
  useful for a re-release in Movie Maker.

  If you open the WLMP files in Movie Maker and save in
  the film format WMV, you can play them in Windows Media
  Player and share them with others.

  The following video tutorial may be worth a visit:

  How to save the project in Windows Live Movie Maker to WMV Format
  http://www.YouTube.com/watch?v=ZyqZm5MBc7o

• How to make iTunes automatically recognize the location of my iTunes library?

  I have my iTunes library on an external hard drive (all files).  Works fine when the drive is connected to the MacBook.  Recently, I decided that instead of having hung the MacBook hard drive all the time, I could connect it permanently to the network plug on my Time Capsule and access the library on the network.  Did this and traveled to the new location of the library to iTunes without any problems.  However, I must now go to the new location of the library whenever I run the iTunes application.  I know that iTunes needs to pick up the location automatically - what have I not done?

  Launch iTunes while holding down the option/alt key and select the file iTunes Library.itl the external drive.

  The external drive should be active and on (not sleeping) before you start iTunes.  Post by thanos206 with tip on using iTunes on external drives - https://discussions.apple.com/thread/3282856 - ' create an alias of iTunes and place it on the network drive. " Then drag this alias in the dock so when iTunes launches the player must climb if it is not already. »

• How to create a shortcut to toggle the sound device?

  Anyone have any suggestions on how to create a shortcut to toggle the USB audio device in Device Manager?

  A shortcut is to enable this device, and the other shortcut is disable this device.

  Thanks for all the suggestions

  Hi oem7110,

  · Why you want to create a shortcut to enable or disable an audio device from Device Manager?

  You will be able to create the shortcut to Device Manager but no shortcut to enable/disable a device in Device Manager:

  a. right-click on the space empty where you want to create a shortcut

  b. click the shortcut

  c. in the type of space empty in devmgmt.msc

  d. click Next and follow the instructions in the wizard.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot access BIOS when OS disk encrypted w / Bitlocker, starting on the USB key is not unlock disc

  Hello

  I enabled Bitlocker on my Acer Aspire 5315. The system partition is encrypted and the data partition. My motherboard doesn't have a TPM chip, so I opted for the unlock with a USB key.

  When I start the PC or wake them from their hibernation, the splashboot (with the logo of Acer) BIOS screen does not display the information below on how to access the BIOS (press F2) or the boot menu (F12). And therefore I can't access those as I used to.

  BitLocker does not account for the USB key, then asks for the password to unlock the HARD drive. Then Windows starts very well.

  However, restart (by a Windows or after you have entered the wrong password Bitlocker too many times), the BIOS splash screen is normal (with how access BIOS and boot menu), I can access BIOS by pressing F2 AND succesfully Bitlocker unlocks the HARD drive with the USB flash drive without having to ask for the password.

  So, my question is how Bitlocker unlock the HARD disk automatically via the USB when the PC starts?

  Thank you for reading.

  Note: I posted this question on http://social.technet.microsoft.com/Forums/en-US/w8itprosecurity/threads they suggested that I ask the Acer support.

  Thank you also get answers in the TechNet forums.  I'm sorry that you were unable to get a more complete answer it.

  We suggest that you uninstall BitLocker and decrypt the drive to determine if this restores your ability to access the BIOS.

• Using the USB audio device as default instead of analog audio ports

  Audio microphone USB installs and is listed in the devices under sound, video and portable with Dell computer game controller devices running Windows Vista, but the problems the system to use the USB mic as the default.  The sound devices list has also IDT HD audio codecs indicated, and the system will analog as the default input channels for the microphone, with no way to install the USB device.  Is it possible to put the USB audio as default microphone device?

  Hello RSA 456,.

  Many sound problems are caused by hardware that is not configured correctly. We will check your sound card, connect the cables in the correct locations, ensuring that the material has the power and the verification of the volume.
  Please follow the method described below to solve the problems.
  Method 1:

  1. plug your USB microphone.
  2. the LED will light to indicate that it is powered USB.
  3. Windows will automatically detect the USB Audio device and install the universal drivers.
  4. to set up your microphone as default device USB Open Control Panel.
  5. Select display as a classic view of your control panel, then select Select Sound.
  6. click on the recording tab. Here your USB Microphone will be listed.
  7. click on the USB microphone. If there is no checkmark beside the USB Microphone, click on set as default.
  8. the default device is used in most programs such as tape recorder simple registration.

  Method 2:
  Please click the link below to check how to check if the hardware works just fine.
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows?T1=tab02

  Kind regards
  Sooraj.S

• Computer cannot add or find the USB device

  have motorola w766 flipphone and I want to download photos to computer, connected through the usb port, but the computer can not find the device

  Hi Rod,

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1. What is the full error message when you say, "computer can not find the device?
  2 is this problem specific to the particular USB devices?

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run this Microsoft fixit and check the issue.
  Reference:
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/

  If this does not help, then use method 2.

  Method 2:
  Reinstall the USB controllers and check. Please follow these steps:

  a. Click Start, boot manager type of devices in the search box and press ENTER.

  b. expand USB controllers in Device Manager.

  c. right-click on each USB drivers and select uninstall.

  d. restart the computer and Windows will automatically reinstall the USB controllers.

  Then, if the problem persists, use method 3.

  Method 3:
  Please use the suggestions provided in this Microsoft support article and check.
  Reference:
  Tips for solving problems of USB devices
  http://Windows.Microsoft.com/en-in/Windows-Vista/tips-for-solving-problems-with-USB-devices
  (Also applies to Windows 7)

  Additional information:
  Install a USB device
  http://Windows.Microsoft.com/en-us/Windows/install-USB-device#1TC=Windows-7

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• How make the USB auto-ouvrir its Nav Pane folder when I plug. Vista for this? __

  In the Navigation pane (what I call the directory root - no?), when I plug a USB key, I have to click on the folder "Computer" to open it, then the folder of USB stick to open that in order to be able to drag files from the hard drive to the files inside. The bookmarks bar is useless, it's just a subfolder in the "Favourites", just as boring the USB folder and is not yet open USB folder in the Nav pane. I can't find a way to make the USB auto-ouvrir its Nav Pane folder when I plug. Vista can do this?

  This is a Windows update that addresses the functionality of Autorun.  I don't know if it can solve your problem, but it can facilitate some of the following solutions or allow them to work if Vista is up to data: http://support.microsoft.com/kb/971029.

  Here's how to use Autorun with a USB Flash drive that can solve your problem (but it is a bit Advanced): http://www.samlogic.net/articles/autorun-usb-flash-drive.htm.

  Here is a free download which probably fix the AutoPlay in Vista and XP (when I insert my flash drive, a menu popss send me the optios including by studying the disk and when you click it it starts at the root of the drive, and I think that should happen with your USB key as well). http://www.mydigitallife.info/2008/01/15/cleanhandlers-free-download-autoplay-cleanup-utility-for-xp-and-vista/.  I don't know if this will help, but it may solve the problem.

  Here is another article with a procedure of activation autorum for USB drives.  I think you want to insert explorer.exe as filename to open Windows Explorer. http://www.pctipsbox.com/how-to-autorun-programs-from-usb-flash-drive/.

  Here's yet another article on how to set up automatic execution for a USB key: http://www.dailycupoftech.com/usb-drive-autoruninf-tweaking/.

  I hope that one or more of these items helps solve your problem and allow you to do what you want to do with the USB.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Touch screen is broken, y at - it a keyboard shortcut to tell the phone to act as a USB device

  Already to get a new phone, but I need to get the data out of it. Y at - it a keyboard shortcut by default for USB mode?
  Help, please
  Jennifer

  not4u13 wrote:

  The post that shows the key combinations you make reference to seems to be broken.  The links are apparently to images that may not be there?  Whatever it is, I can't view any of them.  Now, I have the same problem but cannot find the key combination because I can't read the post.  Any help?

  The post looks fine on my laptop.

  The combination is 3 keys simultaneously - key Option + Sym + U key

  WyreNut

• How to make the page numbers see the v.5.6.2 Pages automatically through the document?

  MacOs 10.11.4, v5.6.2 Pages.

  How can I make Pages automatically page numbers?  I want to be able to scroll through a multipage created from a blank template document & print specific pages.  Have sought and found answers on paging, but no address my question.  JV

  Pages v5.6.2 dislike doing anything automatically. Page numbers are shown to you when you scroll through a document:

  1. Associated with each thumbnail in this display mode
  2. By inserting the page number in the header or the footer

  That's all for v5.6.2 Pages. Whenever you want to print a specific page, you will need to check the Pages: of the _____ to the _____ in the OS X Print Panel and specify the same value for each entry field to print the page in question. There is no automatic printing of selected pages in the selection of this Panel paper handling.

  Pages ' 09 v4.3 would show the current page number on a lower status bar, with or without page numbers inserted in the header of document/footers. This view could be clicked, and it would change to a text entry where we could fix the jump to page number.

  

• Wild Virus entry - ' [[[...' generated automatically in the entry fields]]]

  Whenever I go to or click on any type of input field (this could be an Email, a word in the document of entry cell in Excel, Internet browser input field, etc.) the following begins to appear automatically in the input field ' [[[... "and repeats continuously until I hit"ESC"or"DEL".

  I ran various Security analysis (Trend Micro, McAfee, MS), but nothing is identified. It is a maddening problem, as I constantly stop and re - type any entry.

  Yes, I think also the defective keyboard and not a virus problem.
  You will need contact Toshiba ASP in your country in order to replace this part.

  Good luck

• PC stopped achievements my digital camera automatically when it is attached to the USB

  Downloaded many pictures of my Canon Power Shot in the past. I just plugged in by USB and software automatically invited to download photos. Now when it is connected I can hear the connection sound familiar, but nothing comes on the screen for me to ask for photo uploads. How can I fix this. Same results with another device as well.

  Hello

  1. All changes made to the computer before the show?
  2. What is the model number of the camera Canon Powershot?
  3. What version of Windows is installed on the computer?
  4. No other USB devices connected to the same port on the computer are working well?
  Method 1:
  Check out the link and follow the steps.
   
  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

   

  You can also check this link:

   

  Troubleshoot camera connection

  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-camera-connection-problems
  Method 2:

  Update the drivers for the USB and check whether the problem is resolved. Check out the link and follow the steps.
  Update drivers: recommended links
  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links
  You can also check out the link below.
  
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
  (The steps described in the articles also apply to Windows Vista)
   
  The USB part of the chipset drivers provided by the manufacturer. You can use the motherboard CD to install the chipset drivers or visit the computer manufacturer, download and install the drivers for chipset for the model that you are using
  Method 3:
  If you have the disk of the software provided with the camera, then uninstall the software and reinstall it. You can also visit the manufacturer's Web site and download the software for the camera model you use. Check out the link.
  
  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program