A way to disable alt - delete a swatch in the Swatches palette?

Similar Questions

• 'error ntldr Press CLT ALT DELETE to restart' during the installation of Windows XP

  Original title: error ntldr CLT ALT DELETE to restart press

  I have a HP Elite 8730w, dule P8600 processor. I had been running XP SP3 when things started to go wrong. Of course, I picked up a boot sector vrius which continued to get me started, but kept wiping my network configuration. I finally thought to it? and managed to scratch the 240g unit. I started to reload Xp HP Cd operating system but it kept stopping at about 56% and finally arrested and expelled from NTLDR is Missinfg Press CLT + ALT + DEL to restart. It will restart but will not read a bootdisk of any kind. I can gert to BIOS but don't know what to do nowob

  Bob

  Thanks, actually I think that the problem was the result of using a back_up disc. I found an old original load XP and it worked fine the only problem now is the 8 or 9 hours of reloading updates up-to-date, service packs and other software.

• No more HD comes back all the time despite the fact that I disabled and deleted in accordance with the instructions, why?

  Since I installed this add, she was resurrect every day even after I disable and remove it following the proper procedures, it just reappears automatically without doing me anything to wake it up. If it is removed and disabled, how is it reappears every time? Is add a very annoying on is not as described, but acts like a bug in ad pop up adds on. I AM VERY ANGRY, IF YOU PLEASE ME TELL HOW TO GET RID ONCE AND FOR ALL!

  Have you used one of anti-headache-ware programs? You must use at least
  three of them because everyone does their job a different path. It can not fail
  something that the other will pick up.

• Impossible to use Ctrl + Alt + Delete key combination on the Windows Server 2008 operating system

  When you use Windows Server 2008, it does not recognize the function "CTL + ALT + DEL" to open a session; It works very well with Windows 2003 and Linux, but not with Windows 2008. It is connected to OmniView SMB F1DP108A using F1DP101

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the HE public Pro on TechNet. Please post your request in the Forum of networking Windows 2008. It is a forum dedicated to solve problems. Please see the link below.

  Windows IT Pro Forum 2008: http://social.technet.microsoft.com/Forums/en-US/windowsserver2008r2networking/threads

  Kind regards.

• Is there a way to disable automatically minimize windows.

  OT: WIndows open the screen management?

  In Windows 7, when moving windows around, open window minimizes them automatically. Is there a way to disable this option?

  Is the window you move minimizing all of a sudden, or is it all the other windows on the desktop?

  If its all others, this sounds like "Aero Shake" - http://windows.microsoft.com/en-us/windows7/products/features/shake

  If it is "Aero Shake" then see if that helps - http://www.sevenforums.com/tutorials/74845-aero-shake-enable-disable.html if you have Group Policy Editor and use the Reg files, back up your PC first, or at least set a restore point and backup of your registry. OR see http://www.howtogeek.com/howto/windows-7/disable-aero-shake-in-windows-7/ for an alternative.

  However, it is probably a safer method that seems to work -http://www.guidingtech.com/5548/quicklu-disable-aero-snap-shake-windows-7/ so its probably worth a try first of all see if it does what you want.

• When I cut the computer on I have to press ctrl, ALT, DELETE. I'm not sure what I did. Does one know how I can uninstall client services netware fot or a way to solve this problem?

  loging on

  When I cut the computer on I have to press ctrl, ALT, DELETE. I'm not sure what I did. None knows how I can uninstall the client services fot netware or a way to solve this problem thanks, Im using Microsoft Windows XP Professional Version: 5.1.2600

  When I cut the computer on I have to press ctrl, ALT, DELETE. I'm not sure what I did. None knows how I can uninstall the client services fot netware or a way to solve this problem thanks, Im using Microsoft Windows XP Professional Version: 5.1.2600

  It is normal and safe... Do you mean that you have not always press CTRL + ALT + DELETE to log on?

  If you * want * automatic login?

  • How to turn on automatic logon in Windows XP
  • How to enable or disable the CTRL + ALT + DELETE sequence for logging on Windows XP and Windows Vista, Windows 7

• Disabling don't require CTRL + ALT + DELETE does not work in XP SP3

  Hello

  I have XP SP3.  I disabled don't require CTRL + ALT + DELETE, and yet I am not asked CTRL + ALT + DELETE when you connect.  I get the Welcome screen.  What should do?

  Thank you

  quote

  Click to select the use the home screen check box if you want to disable the CTRL + ALT + DELETE sequence.

  end of quote

  here

  so if you have disabled it, you 'll get the Welcome screen

• Disable CTRL + ALT + DELETE to open

  Original title: when you connect

  I don't want to have to use Ctrl alt delete when I try to log in. How can I disable this feature?

  Help! Thanks, pete

  Hi zorel0,

  See the below Microsoft article and run the fixit tool available to disable CTRL + ALT + DEL sequence to open a session.

  How to enable or disable the CTRL + ALT + DELETE sequence for logging on Windows XP and Windows Vista, Windows 7

  http://support.Microsoft.com/kb/308226

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• CS3 master collection "maximum number of allowed activations... has been achieved", previously installed on imac of 2006 which has been deleted by the management, so no way to disable, any help?

  CS3 master collection "maximum number of allowed activations... has been achieved", previously installed on imac of 2006 which has been deleted by the management, so no way to disable, any help?

  my user id is 20037502 4400044113 15267602 invoice number contract number

  Serial number and activation support (non - CC)

  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

• Is there a way to change the ctrl + alt + delete keys unlock to not require the password in Windows XP - SP3 computer?

  I hit CRL + ALT + DEL to lock my computer (XP SP3). When I press CRL + ALT + DELETE to open a session back (unlock) is application name to username/password instead of just remember my user name and only to enter the password.  How can I just change this behavior just ask for my password?

  See if this article helps you:

  "You cannot change the display behavior of the display of the user with the user ID name when a Windows XP-based computer comes out of the locked State"
    <>http://support.Microsoft.com/kb/837022 >

  HTH,
  JW

• How can I change the way users log on or not with Windows 7 (Ctrl &#62; Alt &#62; Delete login)

  I want to press Ctrl > Alt > delete when I connect like in XP.  But I can't figure out how.  I have looked in Control Panel to user accounts, but there is no option like that for Windows 7.

  > Sorry, I have not put this in question.  Once you press Ctrl > Alt > delete, I want to have a window where you type your user name and password like XP.  So first, you press Ctrl > Alt > remove and then type your user name, then the password.  Thank you.

  Hello, welcome.

  Please go: start / typing netplwiz in search programs and files / right click and run as administrator / type the password if you are prompted / go Advanced tab upper / Secure logon / check users need to press Ctrl + Alt + Delete.

  RDS

  itconcerned

• Ctrl + alt + delete: instead of a menu of auto start Task Manager?

  I was wondering how to do ctrl + alt + del open Manager tasks immediately instead of a menu to open upwards and then having to choose the Task Manager.

  Thank you.

  Hi Brian.

  It seems to me that you have disabled the Welcome screen at first upward.  You can check this by going to the "Start" menu and then go to 'Control Panel'.  Click on "User accounts" and then click on the option "Change the way users log on and outside."  You should now see two options.  The first is "Use welcome screen" and, with your current explanation, that has a checkbox that is empty.  Click the checkbox to enable the Welcome screen, then exit to the desktop, and then restart your machine.  After reboot, you should then see the Welcome screen with a list of all users. (If more than one.)  Sign in and then try Ctrl + Alt + Delete.  The task manager should now appear.

  If you think that my answers are useful please vote and mark as a possible answer. Thank you.

• CTRL + ALT + DELETE no longer works on my PC

  I used to be able to press CTRL + ALT + DELETE when my PC has pick up in a program. Now, when I do I get this: "Manager tasks has been disabled by the administrator."  My PC is being used and I don't know anything about a previous administrator.  How can I replace this message and return to the use of C + A + D? Or is there another trick to get out the programs that do not meet?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  If your system is at a standstill and you must use the Task Manager to kill a process, it is not normal and your system has a problem that you can solve.

  If your task manager has been disabled (unless you have disabled it on purpose), then you certainly have another problem to accompany your first problem.

  The usual advice along the lines of "something has been disabled in Group Policy" and that's probably true, but if you are using XP Home, is not Group Policy Editor in XP Home and which is not really you tell where to look in group policy, even if you run the Group Policy Editor.   You need to know how to fix it.

  Here is a complete solution that works for all versions of XP and requires no hunting around to find where things have been disabled in the Group Policy Editor.  If you happened to have documentation for Group Policy registry locations, there is no hunting, but most people don't have documentation.

  Unless you have disabled these tools on purpose, chances are good that your system has a malware infection.  The malware knows what tools you use to try to find and remove, for the malware disables the things you are more likely to consume and prevents them from running if you can't find it.

  All malicious software tools you currently use or have used failed to protect your system.

  The malware will be happy you trick into thinking that you need to so something drastic to fix your system - as a facility repair, system restore point or a total reinstallation of XP.  This is what it would be like you, but these measures are not necessary.

  You must solve the immediate problem of the tools does not, then scan your system for malware when you are finished.

  No matter what kind of malware you've used analytical tools, they are unlikely to solve this problem, because they cannot tell if the changes made to your system have been on purpose (you or an administrator who makes them) or some malware changed them, so the analysis tools will let these things alone (it's usually a good thing).

  If your task manager is afflicted in this way, there are probably other things that also do not work - like the registry editor, System Restore and the command prompt, so fix them all at once even if you have not discovered they are broken again.

  These commands from registry removes the registry entries that are stop opening programs.  Although the registry entries do not exist, these commands are safe to run.

  Before making any changes to your registry, back up the registry with this free and popular tool:

  http://www.SnapFiles.com/get/ERUNT.html

  Open Notepad to create a new text file:

  Click Start, run and enter in the box:

  notebook

  Click OK to open a new Notepad file.

  Copy and paste the following lines of text into the new Notepad file.

  Windows Registry Editor Version 5.00

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableTaskMgr" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableRegistryTools" = -.
  [HKEY_CURRENT_USER\Software\Policies\Microsoft\Windows\System]
  "DisableCMD" = -.
  [HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesSystem\\\]
  "DisableTaskMgr" = -.
  [HKEY_USERS\.default\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableTaskMgr" = -.
  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]
  "DisableCAD" = DWORD: 00000000
  [HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\SystemRestore]
  "DisableConfig" = -.
  [HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\SystemRestore]
  "DisableSR" = -.
  

  Save the new text file with extension .reg on your desktop or somewhere you can remember with a name you can remember, something like:

  enableit.reg

  After you save the file, close Notepad.

  Locate the file enableit.reg on your desktop and double-click it.

  Alternatively, you can right-click on the enableit.reg file, choose open with... and select the registry editor.

  Answer in the affirmative to the question... Are you sure you want to add the information in the registry?

  You should then see a message that information has been registered in the register.

  If the registry editor has also been disabled, you will not be able to run registry changes to fix the rest of the problems, then you must first activate the command registry editor run.  Even if the registry editor is not broken, these commands are safe to run.

  Click Start, run and enter in the box (copy/paste would be safer) the following text:

  Tracking Add HKCU/v DisableRegistryTools /t REG_DWORD /d 0

  Click OK and answer Yes, if you are prompted with a message of crash.

  Click Start, run and enter in the box (copy/paste would be safer) the following text:

  Tracking Add HKLM/v DisableRegistryTools /t REG_DWORD /d 0

  Click OK and answer Yes, if you are prompted with a message of crash.

  Now that the registry editor has been enabled, you can run the enableit.reg file to troubleshoot issues.

  Depending on the circumstances, your tools can work right away, but go ahead to avoid the question "did you restart your system?" later, and restart your system at the time of trial to be sure things work again.

  Allow the tools in this way only solves the symptom of malware infection, but does not solve the real problem (the system is currently or has been infected by malware) so you're not quite done yet - your system might still be infected.

  Download, install, update and do a full scan with these free malware detection programs can solve any problems.

  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  They can be uninstalled later if you wish.

  You can also delete the enableit.reg file when you are finished.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• my computer crashes, I press ctrl alt delete and it thaws

  original title: don't know what's wrong

  my computer crashes, I press ctrl alt delete and it thaws, this happens very often, he does not have it for weeks at a time and then it again. I'm a paint shop pro user, I uninstalled and reinstalled psp more 2 browsers, firefox and chrome. My main browser is lunascape which he doesn't seem to be a problem. On chrome when I click on a tab, it closes. I can't copy on firefox. It did not help. Also, when this problem is occurring, I can't drag and drop only cut and paste. This has happened for several months. Someone told me I have a memory leak, but do not know that for you, I was getting ready to reformat with a full system restore and that said person who would not help, but again, I am not sure it is. I ran the antivirus scans, nothing I don't know what to do. I use a dell inspiron 531.

  Hello

  Check with Dell Support, their drivers and documentation online and ask in the Dell forums
  on the problems known.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  =========

  Returning the system back out of the plug box, would help reduce the possible causes
  like that would eliminate most of the possibilities of the software.

  ----------------

  Try this troubleshooting complete enough to see if it helps to determine the cause of and to eliminate
  the questions.

  Use the startup clean and other methods to try to determine the cause of and eliminate problems.

  ---------------------------------------------------------------

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or
  Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods
  above is preferred so that the latest drivers from the manufacturer of system and device manufacturers are
  found)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Is there a way to disable Firefox from telling me that Adobe Flash Player is out of date?

  We run a program that does not allow students to update programs or make other changes. The problem is that Firefox thinks that it NEED to update Flash Player whenever there is a new version. It is simply not feasible with as many computers as we support. 99% of the time, the update is not necessary.

  Is there a way to disable Firefox from telling me that Adobe Flash Player is out of date?

  You can disable the blocking of modules in Firefox and remove the file blocklist.xml in the profile folder.

  Disable these prefs.
  Extensions.blocklist.Enabled = change this pref to false
  Extensions.blocklist.URL = delete the url if Firefox can't find the server where this file is sent from