Confusion of AAA - user name local access
Hey all,.
I'm a bit confused.
I have the following commands on my device:
username privilege 15 secret 5 bla blah!@#$%%
AAA new-model
AAA authentication login default group Ganymede + local
the AAA authentication enable default group Ganymede + activate
AAA authorization config-commands
AAA authorization commands default Ganymede group 0 +.
AAA authorization commands 15 default group Ganymede + local
AAA accounting exec default start-stop Ganymede group.
only AAA 0 default stop accounting controls group Ganymede +.
orders accounting AAA 15 by default start-stop Ganymede group.
Default connection accounting AAA power Ganymede group.
Everything works fine.
However when I bring the RADIUS server that I am able to connect to the device with the local username, but it fails when I enter the enable command. How can I access when emergency that GANYMEDE fails? I did research online and have tried several commands. Is that all that I'm missing? I have a password configured thus enable secret. But don't even have a chance to enter. arriving at the "in" to > prompt:
% Authentication failed.
Thanks in advance for your help.
My essay has led to frustration.
:)
Hi Geo,
First of all, please give the back fall 0 control method.
AAA authorization commands default Ganymede group 0 +.
Add local
AAA authorization commands 0 default group Ganymede + local
Make sure you put in right enable password, try to reset it and give it a shot.
If it is then get Ganymede debug output and debug aaa authentication
Kind regards
~ JG
Note the useful messages
Tags: Cisco Security
Similar Questions
-
((Password of SQL DEVELOPER user name? -access TABLES APEX))
How do you get tables APEX SQL DEVELOPER?
What should I use as a name of USER and PASSWORD
inside SQL DEVELOPER?
____________________________________________
Hello
I installed on my APEX machine.
WINDOWS 7 PROFESSIONAL 64-BIT.
I also installed:
ORACLE XE
and
SQL DEVELOPER.
I have applications that I created in the APEX
with different paintings.
________________________________________
Question:
**********************************
How can I access my APEX tables of
within SQL DEVELOPER?
Should what USER name and PASSWORD I use?
**********************************
I can do this with
HUMAN RESOURCES
SQL DEVELOPER USERNAME = HR
PASSWORD = HR
It works very well.
..................................................................
But what of my own TABLES APEX
I created inside my own workspace
inside the APEX?
For example:
CONNECT TO APEX:
http://127.0.0.1:8080 / apex /.
If my
APEX DAVID_WS = WORKSPACE
SCHEMA = DAVID_SC
APEX USERNAME = DAVIDAPEX_UN
APEX PASSWORD = DAVIDAPEX_PW
..............................................................
LOGIN TO THE ADMIN OF THE APEX:
http://localhost: 8080/apex/apex_admin
APEXADMIN USERNAME = DAVIDADMIN_UN
APEXADMIN PASSWORD = DAVIDADMIN_PW
..............................................................
So, given the 6 above
NAMES and PASSWORDS above:
SQL DEVELOPER USERNAME =?
SQL DEVELOPER = PASSWORD?
..............................................................
Thanks a lot for your help!
David
________________________________________________
.
Published by: DAVID888 on February 3, 2011 23:53You tables apex are in the schema attached to the workspace of your applications.
- When you connect, SQL Developer, you use the schema to username and password
- When you connect using your developer account, you use the Apex workspace account details (but when change the DB using the workspace that it accesses the schema using the schema and password you had linked to the workspace)
Hope that's clear.
-
GANYMEDE + and local access connection
Basic summary is that I want to have GANYMEDE + and local connection to access router on the vty lines. So, I did the two groups below. Goody obviously is what will use GANYMEDE and Console uses the local connections. I divide them between 0-4 and 5-15. It seems that whoever is more get first priority for authentication. If I move the Console to 0-4, knit then the local users and GANYMEDE do not. If I have Goody at 0-4, then GANYMEDE works, but local doesn't work. I know I'm missing something simple. Have two RADIUS servers, I doubt that the two will never back down, but in case I want user names Local to work. If I apply an access list to 4-0 and use SSH, as well as a list of different access to 5 15 and use telnet, it seems to work that way but doesn't help me if the internet goes down and I am trying to access the router via SSH on-site.
Thanks in advance.
David
AAA authentication login Goody group Ganymede + local
local authentication AAA Console connectionLine con 0
the Console connection authentication
line to 0
line vty 0 4
session-timeout 7
exec-timeout 5 0
authentication of connection Goody
entry ssh transport
line vty 5 15
session-timeout 7
exec-timeout 5 0
the Console connection authentication
entry ssh transportHi David -.
Correct me if I'm not understanding this correctly, but you want to use RADIUS servers for authentication ssh/console type and if they fail, you want the network device to use its local database.
If that is correct you should not need dividing lines and assign authentication lists. The first tribute that you have:
AAA authentication login Goody group Ganymede + local
Lists the Ganymede + and the local database as a possible authentication methods. They will be processed in the order they are configured so that the device will be:
1. use your servers GANYMEDE +.
2. If the GANYMEDE servers + inaccessible then the local database is used
You can test this by assigning 'Goody' to all your vty lines and then do your servers GANYMEDE + unavailable. To do as possible you can:
-Restart the server
-Stop the server interface
-Disconnect the device its uplink network
-Create a list of access on the uplink interface and connection block to the IP addresses of the servers GANYMEDE +.
I hope that helps!
Thank you for evaluating useful messages!
-
remote VPN and vpn site to site vpn remote users unable to access the local network
As per below config remote vpn and vpn site to site vpn remote users unable to access the local network please suggest me a required config
The local 192.168.215.4 not able ping server IP this server connectivity remote vpn works fine but not able to ping to the local network vpn users.
ASA Version 8.2 (2)
!
host name
domain kunchevrolet
activate r8xwsBuKsSP7kABz encrypted password
r8xwsBuKsSP7kABz encrypted passwd
names of
!
interface Ethernet0/0
nameif outside
security-level 0
PPPoE client vpdn group dataone
IP address pppoe
!
interface Ethernet0/1
nameif inside
security-level 50
IP 192.168.215.2 255.255.255.0
!
interface Ethernet0/2
nameif Internet
security-level 0
IP address dhcp setroute
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
Shutdown
No nameif
no level of security
no ip address
management only
!
passive FTP mode
clock timezone IST 5 30
DNS server-group DefaultDNS
domain kunchevrolet
permit same-security-traffic intra-interface
object-group network GM-DC-VPN-Gateway
object-group, net-LAN
access extensive list ip 192.168.215.0 sptnl allow 255.255.255.0 192.168.2.0 255.255.255.0
192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0
tunnel of splitting allowed access list standard 192.168.215.0 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
MTU 1500 Internet
IP local pool VPN_Users 192.168.2.1 - 192.168.2.250 mask 255.255.255.0
ICMP unreachable rate-limit 1 burst-size 1
enable ASDM history
ARP timeout 14400
NAT-control
Global 1 interface (outside)
NAT (inside) 1 0.0.0.0 0.0.0.0
Route outside 0.0.0.0 0.0.0.0 59.90.214.1 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
the ssh LOCAL console AAA authentication
AAA authentication LOCAL telnet console
AAA authentication http LOCAL console
AAA authentication enable LOCAL console
LOCAL AAA authentication serial console
Enable http server
x.x.x.x 255.255.255.252 out http
http 192.168.215.0 255.255.255.252 inside
http 192.168.215.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto-map dynamic dynmap 65500 transform-set RIGHT
card crypto 10 VPN ipsec-isakmp dynamic dynmap
card crypto VPN outside interface
card crypto 10 ASA-01 set peer 221.135.138.130
card crypto 10 ASA - 01 the transform-set RIGHT value
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 65535
preshared authentication
the Encryption
sha hash
Group 2
lifetime 28800
Telnet 192.168.215.0 255.255.255.0 inside
Telnet timeout 5
SSH 0.0.0.0 0.0.0.0 outdoors
SSH timeout 5
Console timeout 0
management-access inside
VPDN group dataone request dialout pppoe
VPDN group dataone localname bb4027654187_scdrid
VPDN group dataone ppp authentication chap
VPDN username bb4027654187_scdrid password * local store
interface for identifying DHCP-client Internet customer
dhcpd dns 218.248.255.141 218.248.245.1
!
dhcpd address 192.168.215.11 - 192.168.215.254 inside
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
Des-sha1 encryption SSL
WebVPN
allow outside
tunnel-group-list activate
internal kun group policy
kun group policy attributes
VPN - connections 8
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value split tunnel
kunchevrolet value by default-field
test P4ttSyrm33SV8TYp encrypted password username
username kunauto password bSHrKTGl8PUbvus / encrypted privilege 15
username kunauto attributes
Strategy Group-VPN-kun
Protocol-tunnel-VPN IPSec
tunnel-group vpngroup type remote access
tunnel-group vpngroup General attributes
address pool VPN_Users
Group Policy - by default-kun
tunnel-group vpngroup webvpn-attributes
the vpngroup group alias activation
vpngroup group tunnel ipsec-attributes
pre-shared key *.
type tunnel-group test remote access
tunnel-group x.x.x.x type ipsec-l2l
tunnel-group ipsec-attributes x.x.x.x
pre-shared key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
Review the ip options
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
inspect the icmp
!
global service-policy global_policy
context of prompt hostname
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:0d2497e1280e41ab3875e77c6b184cf8
: end
kunauto #.Hello
Looking at the configuration, there is an access list this nat exemption: -.
192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0
But it is not applied in the States of nat.
Send the following command to the nat exemption to apply: -.
NAT (inside) 0 access-list sheep
Kind regards
Dinesh Moudgil
P.S. Please mark this message as 'Responded' If you find this information useful so that it brings goodness to other users of the community
-
Vista - Windows 7 network connection. username and password is unknown.
Hello
I just got a laptop with windows 7 on it and I want to connect to my other PC for it, they are on the same network through a router. the PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.
If someone could answer this question, it would be great.
HelloMaybe this can help.Win7 when configured on the peer-to-peer network has three types of configurations of sharing.
Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.
Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
Public share = network Public (as Internet Café) in order to reduce security risks.For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.
http://www.ezlan.NET/Win7/net_name.jpg
Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions
General example, http://www.ezlan.net/faq.html#trusted
Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .------------------------------
If your network consists only of Win 7 and you want a simple network, use it.
http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup
After you have configured the homegroup, scroll to the bottom for the Permission/security section.
-----------------------------
Win 7 networking with other version of Windows as a work network.
In the center of the network, by clicking on the type of network opens the window to the right.
Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.
http://www.ezlan.NET/Win7/net_type.jpg
Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm
Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx
Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspxSetting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.
-------------
If you have authorization and security problems, check the following settings.
Point to a folder that wants to share do right click and choose Properties.
In the properties
Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.
This screen shot is to Win 7, Vista menus are similar.
http://www.ezlan.NET/Win7/permission-security.jpg
The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.
When everything is OK, restart the network (router and computer).
* Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.
* Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.
---------------------
*** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
Users /(user name)/AppData/Local/Temp
Greetings,
I'm trying to better understand the purpose of this particular Temp folder (usersTemp under Vista (ultimate). Specifically, it operations, functional routines, application of the related activities, or other executions file would put files in this folder? The question is asked by finding this Temp folder that is populated by a lot of Microsoft Word and PDF files that were created a long time ago and have resided largely intact in the original "saved in ' repertoire since then. They are sensitive files and I want to understand what may have caused them can be completely copied to this folder. (I'm a computer operating relatively new for which application all files were transferred from the old system running XP and earlier version of Office Pro. The file transfer process went well with all paper, folders, files, and directories organized and working on the new system, as they had it on a prerequisite. The files in Temp folder in question were created on old system years ago month.) If some could refer to reliable, applicable information resources, that might be useful as well - in addition to any direct response to the motion may be possible.
Thank you-
Sincerely,
Howard
Description: Temp folder
Location: C:\Users\\AppData\Local\Temp
Why you be interested: many programs are in need of a safe place, where the user has permissions, to generate temporary data. This is the place to look. They may have wiped/grater the main file, but there may be a version in this directory according to the application works.
Entered by: Irongeek, but thanks to Nir.Information appears in this issue most often when a program crashes and parts of open files are placed in this directory - it is very large, then you can have a lot of accidents.
What are the dates on the temporary files and are they complete files or only the fragments of files (you can tell by trying to open them and see if they if they have valid file types)? They occurred around the same time or they occurred over a long period of time?
I do not know why these files seems suddenly in the temp folder if they have not been used in 10 years - I see nothing in Vista that would cause that to happen automatically. Maybe someone actually did open without your knowledge (even though it will have to be an admin to access the source files, unless they know your user name and password).
Open the folder Documents (the source of these sensitive files) and click on the title bar and then click more. Check the Date of consultation. Check Date of visit. Check the last time. Then go through the files to see this information on them to see if they have been recently accessed in these ways (you can delete the columns once you are finished). If the dates are old, chances are good that they are not open (which should make you feel better, but why they appear in the confosing especially temp folder). Are that they all the same type of file (as all .doc files) - if so, what file type and if not what types of files are involved? Maybe something is happening with the program that created (is Microsot Word?) because of this activity (although I can't imagine what it is maybe).
Make periodic backups, including these source files? It is possible that the backup process is originally this activity (although I frankly never heard of this before and it would be a big surprise).
Here is a link to a search engine Bing on "Appdata/Local/Temp" which can be a help to http://www.bing.com/search?q=Appdata%2FLocal%2FTemp&first=1&FORM=PERE (I it used to get some information here).
I don't know if I answered your question - I think I have got approached in some areas but missed a few aspectis of your questions. Be specific if you want information.
I hope this helps.
Good luck! Lorien - a - MCSE/MCSA/network + / A +.
-
local user name and password if the ACS server fails
Hello
I have every router and switch configuration for authentication of the connection via the ACS server. I used these 12 lines below and it works very well. Each engineer has their own account.
AAA new-model
AAA of default login authentication group Ganymede + activate
the AAA authentication enable default group Ganymede + activate
AAA authorization exec default authenticated if
AAA authorization commands 15 default group Ganymede + authenticated if
AAA accounting exec default start-stop Ganymede group.
orders accounting AAA 15 by default start-stop Ganymede group.
Default connection accounting AAA power Ganymede group.
AAA - the id of the joint sessionRADIUS-server host x.x.x.x
RADIUS-server application made
radius-server key, regardless of----------------------------------------------
I would add to this a local username and password so that if the ACS server was offline engineers have yet to connect with a knowledge of username and default password
username privilege 15 secret mypassword MYUSERNAME
line vty 0 4
local connectionQ. How do I make ACS a first preference and connection server only local users username and password if the ACS server is down?
Kind regards
Kevin
Now you have the password to enable as the fall back method:
AAA of default login authentication group Ganymede + activate
Change 'enable' for 'local' and the local (to the router) database of user names and passwords is used.
The same works to activate authentication (the second line "authentication, aaa... ("in the config that you posted).
-
Hello
We have configured the AAA authentication on our routers with RADIUS server authentication. As a backup option, a secret user and enable local password has been configured.
Until this server RADIUS works very well so it was to test the locally configured username and activate the password.
Is it possible to test the local user name / password password and activate. Even when the RADIUS server is accessible.
Without changing the existing AAA as configuration below.
AAA login default group radius authentication local - first preference to the RADUIS group and the second is for the local user.
Last option is to configure a new local user or overwrite the existing username password.
Please share the experience.
Thank you
Subodh
Subodh
As long as your router can communicate with the Radius Server, and can get an answer to his request for authentication of connection then the router will never check the local user name. If you want to test and then the name of the local user, you must do something that prevents communication between the router and the Radius server.
Maybe the simplest test is to change the connection of aaa authentication settings. But if you don't do this there are several alternatives that you might consider:
-You can disconnect the network connection from the router to the Radius Server, and then try to connect to the console. To test the local user.
-You can reconfigure the key that is configured for the Radius server. That should prevent the communication with the Radius Server and allow you to test the name of the local user. (be sure to maintain an active session to activate mode during the test so that you can set the key to its original value if there is a problem during the test).
-You may have configured a host route static for the address of the Radius server that has 0 null for the next hop. This prevents communication with the server (but not impact anything else) and allow you to test the name of the local user. (as before, I suggest that you maintain an active session to enable during the test mode, so that you can remove the router static host if there no problem during the test).
-You can set up alternative aaa authentication named method that uses only local, assign it to the console, and then connect to the console. That should allow the router check the local username without affecting the sessions on vty etc..
HTH
Rick
-
Web Access: Login failed due to a bad user name or password
What is the default user name and password to connect to the Web 2.0 Server access. I had it installed on XP x 64 and was able to access. Installed Vista Ultimate x 64 and I am not able to connect to web access with my user name and password for XP.
The user is the local administrator for your host PC user.
-
I use Win 8. I recently uninstalled Firefox on C: and am looking to reinstall on F:
I downloaded the installation package full https://www.mozilla.org/en-US/firefox/new/?utm_source=firefox-com & utm_medium = referral, but when I ran the installation package, I got a popup window after the extracted package:
c:\Users\ < NAME > \appdata\local\temp\7zS171C.tmp\setup.exe
The dependency service or group could not startAny ideas?
You may need to temporarily disable your security software (antivirus).
-
I can not access my Verizon email on my iPad. I can access the login page, but there is no box to enter the user name. I talked to Verizon support, and they say no problem at their end. Any ideas?
Macbeth,
From your description, it appears you are trying to get your mail using Safari to access your e-mail account. Why you do not use the Mail App?
http://www.Verizon.com/cs/groups/public/documents/adacct/Setup-email-mobile-Devi Ed.pdf
-
How to get rid of user name lists in the Gmail window. Access Gmail with Firefox.
It's a small but annoying problem. I have and sometimes friends, use my Gmail account to check your emails. In the window of Gmail user, who can I access with Firefox 3.6.9, a list of all the old users name when I click in the window. I disabled Google cookies and history, but the list remains! I can hide the list, but not to delete it, if I check "form and search history". But the list is indeed alive, when I uncheck this option! Is there a way to get rid of the list?
See https://support.mozilla.com/en-US/kb/Form+autocomplete#Deleting_individual_form_entries
-
Time machine access after a clean installation with different user name
Hello
I did a clean install upgrade to El Capitan in Yosemite. I chose a user name. How can I connect my new account to the old Time Machine?
thx for your help
Rainer
Time Machine, please press the shift-command-C key combination. The windshield will show the mounted volumes. All snapshots should now be accessible. Select the one you want and search for files to restore.
If you need to restore from a backup of the hidden user library folder, first select a snapshot, and then press shift-command-G. A go to the folder dialog box opens. In this document, you enter the path to the folder. The dialog box will help you by automatically filling parts of the path when you start typing.
The path starts with the slash character ("/"). Enter that. The rest of the parts is separated by slashes.
The next part is the date and time of the current snapshot. Enter a '2', and the rest of the date should be filled in automatically. Press the right arrow key to access the end of the path. Enter a slash to start the next game.
Next is the volume name (usually "Macintosh HD" unless you assigned a different name.) Start typing, then jump to the end and enter a slash.
The next part is 'Users', followed by a slash.
Then is your short user name. It is also the name of your home folder, which is represented by an icon of the House in the sidebar of a Finder window.
Finally, enter "Library", and then press return. You should now be in the library folder. From there, you can move like in the Finder. You can also select another snapshot of the same folder.
-
You can limit access by user name time?
I want to restrict a user's access to the wifi by user name in a specific period of time. Is there one simple way to do it other than obtaining the MAC address via the Airport Extreme settings?
I want to restrict a user's access to the wifi by user name in a specific period of time
This is not possible if you ask on one of the Apple AirPort wireless routers.
Is there one simple way to do it other than obtaining the MAC address via the Airport Extreme settings?
NO.
-
Original title: Windows 2000 server
Search results for "I try to access my work PC to remote my PC at home. I need to get through my credentials and don't know where to find the information. The box says Windows 2000 Server and I do not know where to find my user name or password. The one I use to log into my work PC or PC at home do not work. »
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
Maybe you are looking for
-
Nets not transferred to Ultiboard
I have a Multisim 13 design for an extension table simple using a card-edge connector. The custom component is the Multisim and Ultiboard of databases. The nets appear in Multisim, but the ewnet file does not show their links with the custom compon
-
As the title suggests, I think that I need a replacement battery for my Thinkpad Tablet 1838. I went for 3 months and came home to a dead tablet. It does not take a charge, used to power over everything. Replace the battery an option? Thank you in ad
-
Auto play/auto run does not not for pc games
AutoPlay has stopped allowing me to select an option, when a device is connected or a CD is put in the disk drive, I have to open the devices via my computer. Also, AutoPlay stopped running when I insert a game that uses it and I have no way to open
-
Dear RIM, Have you considered the spiral situation you are in it with regard to the market share? either Apple, Android, etc. Why you even more software buggy/templates in the form of Blackberry Desktop Software 7.0 release? The approver (for this ve
-
BlackBerry Curve 8330 of Smartphones icons disappear!
My icons disappeared a few weeks there, on a trip... removed battery and everything was ok... this weekend it happened again... the battery did nothing, but now I get an error 523, verizon said they have never heard of... didn't call technical suppor