about connection

Similar Questions

• Question about connecting to the network with a Terminal window

  Windows XP Pro, SP2, Fritz-card PCMCIA-

  Hello
  I am trying to create a connection from computer to computer by ISDN telephone line.
  I didn't install any software of specific composition, I only use the parameter of MS WinXP.
  Hardware works fine, I tested it successfully in composition in any other internet provider.

  Now I need to connect to a corporate network and they have a specific logon policy, where I need display Terminal window during the login procedure.
  So I turn on dial in properties connection on page "Security properties" dialogue box "show Terminal window.

  Problem during dial-in: the window does not occur.
  Second problem: if I go next time to this option, the input value is not saved.

  Any ideas?

  Kind regards
  Peter

  Please don't be crazy about me, but I don't see what's in your specific assignment for the Toshiba forum.

  You should speak with your company's network administrator and it should be able to help you. Otherwise, perhaps on some network specific forum you will have more chance to find what is the solution to your problem.

  If you have laptop Toshiba and everything you need for the connection works fine, I put t see to write here.

  In any case I wish good luck and hope that your network administrator will be able to help you.

• ABOUT CONNECTION LINKSYS

  Hello. I have a question about the security of the connection to a router unsecured with an Ethernet cable.

  Here is my set up... I have my Comcast internet cable, connected to a Motorola modem/router. (IT'S PASSWORD PROTECTED) I need an additional Ethernet connection to my Magic Jack. So I connected an Ethernet of the combo from Motorola to a Linksys router. I then my Ethernet computer connected to the router linksys (WIRELESS IS a SECURE) but... I am connected to the internet. (Ethernet cable)

  My question is... My Ethernet connection is safe from this way? I do not use the wireless features. So I guess that the wired connection is secure. Thanks in advance for any answer to my question... Ben

  As long as your router firewall is enabled so that you are protected from the side internet piracy.

  Your wireless security keeps people out of your wireless network.

  Connection to the ethernet requires someone inside the location that I assume the doors a locked

• Question about connecting firewire to a LCD TV

  FireWire can be used to connect to a screen LCD TV(for movies)? For sound or / and video?

  Hello

  I'm not sure, but I gues he won´t be able to do, given that firewire was essentially intended to connect firewire for data transfer devices high together.

  If you want to learn more, check out this site-online http://en.wikipedia.org/wiki/FireWire

  I guess that it s not able...

  Welcome them

• Re: Toshiba Stor.E Basics 1.5 TB, USB 3.0 - about connection internal

  Please how can I know if inside the drive is sata native or with USB soldering on the circuit board?

  My model is: HDTB115EK3BA

  Thank you.

  Hello

  Unfortunately, the Toshiba STOR. E BASICS - BLACK 2.5 specifications page "-1.5 to provides no details on the controller, but in my view the inside of the box, you will find a common SATA 2.5 which is connected to a controller HDD USB SATA."
  http://www.Toshiba.EU/hard-drives/portable/store-basics/hdtb115ek3ba/

  You can also try some freeware like HDDscan for example tools to scan the HARD drive and get more details.

• about connection iPod video car

  I have an old video of ipod. I connect it to my car with a usb adapter that is due to the fact battery will not hold a charge. He however repeat myself "ok to disconnect" on the screen even if it will play the music. I have to unplug the unit to see the screen and change the song. Is it possible to plug it into the car and be able to still see the music list?

  What happens if you do a Reset when it is connected?

  Learn how to reset your iPod - Apple Support

  If you connect it to a USB port on a car audio system, you can connect to the current (or "cigarette lighter") using the appropriate adapter.  If the connection is purely a power connection, I don't think you will get the message OK to disconnect .  It would be like the connection of the iPod to a power USB home adapter.

• Pavilion P7-1120: new necessary monitor - about connection

  My monitor is dead (6 years), so I need a new.  Support HP told me that I had to get one with a dvi - d and vga cable.  Most new monitors have both of these connections.  The VGA is necessary - I dvi - d connection.  Do I need a new computer to get the appropriate for the hdmi connection?

  Mike, welcome to the forum.

  Because your computer has a DVI - D port, you can simply us for the connection.  You don't need VGA, also.  If you want to use the HDMI, you can buy a USB 2.0 to HDMI video adapter.  StarTech makes these adapters.  If you decide to go in this direction, I suggest you contact their Custome Service to ensure that you get the right adapter.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Question about connected HP

  Hello

  I posted this question in another room but thought I would repost it here.

  I bought a HP Officejet Pro 8600 Plus e-all-in-one... When I added it to the selection of the connected HP device it shows my printer and it is online but under it, it displays a yellow icon with a question mark and next to him "a problem with the printer. The printer is used with a desktop Mac Pro (12-core). Operating system Mac OS 10.6.8 and superior.

  I just install another printer, HP Deskjet 3510 series, which is listed under the HP Officejet Pro 8600 Plus e-all-in-one that is used with a MacPro laptop and it shows that the printer is ready. Also uses the operating system Mac OS 10.6.8.

  Thanks for any help on this matter.

  Hello

  Thanks a lot for the information.  I had already solved the problem and I'm running!

  I'll keep a copy of the information provided to the case where a race in another question.

• I run Windows XP Professional Service Pack 3 (SP3) on a desktop, not a laptop. How can I go about connecting to a Signal Wi - Fi?

  Whenever I try to make a link to a Wi - Fi signal, it doesn't let me. I opened my network page and it just says this: "CONNECTING to the NETWORK LOCAL IS DISCONNECTED a CABLE IS UNPLUGGED." I went through and tried to set up networks, and again, it won't let me.

  Your office has a wifi adapter?  Open the Device Manager (start > run > devmgmt.msc > OK) and expand (click on the +) the category "network adapters."  Please report (full names, please) all of the devices listed there.  If any device displays a warning icon, double-click it and report the message under "device status".

  What did you do to 'set up network '?  Please be as complete and detailed as possible.

  What version of Windows you have, including the service pack?  (right click on desktop and select Properties, if you are not sure of your level pack Windows version or a service).

  Please provide the following diagnostic information:

  Open a command prompt window (start > run > cmd > OK)
  type the following lines and press ENTER after each line

  ipconfig/all > "% userprofile%\Desktop\ipinfo.txt".
  '% userprofile%\Desktop\ipinfo.txt '.

  Copy and paste the contents of the opened Notepad window in your response here.
  Close Notepad and windows command prompt and remove the file ipinfo.txt to your desktop

• S2240T, Inspiron 531, about connection

  I recently bought a new computer XPS 8700 (to deliver) that goes along with the above screen. In the meantime, I changed the hard drive on my Dell Inspiron 531 desktop PC and got it working again. I was hoping to connect the new monitor to my Inspiron 531, but the new monitor has an additional connection (VGA), and I get the message "no VGA connection. My Inspiron 531 has no such connection VGA to connect the cable for the new monitor. So my question is: is it possible that I can get the S2240T monitor to work with my Inspiron 531? Thank you!

  Our tool shows that the card 256 MB Nvidia 8600GT discreet has been installed in the Inspiron 531 desktop computer. Looking at your system image I posted, the video card is on the bottom. You must purchase a DVI cable. Plug one end into the DVI port monitor and the other end to the background video card DVI port.

• About connection network blackBerry Smartphones

  Hello everyone!

  At first, I must say that I am a newbie with the BlackBerry.

  I use T-Mobile as a career.

  The maximum speed I get from the repartir0 of the career is 7.2/1,4 Mbps... However, my question is this:

  If I am at home with my device BB and at home I have the WiFi router and my BB is connected, if I try to open certain pages or some do sort of request to the Internet, the BB will use the 3G connection or my WiFi?

  I tried to check the system where I can order the connections (1. WiFi - or tier 2. 3 tc g.)

  It is perhaps a silly question, but please help me!

  Best regards

  Dean

  Hiya!

  and the answer is...

  If you connect wirelessly, your device will use it instead of your 3 G/EDGE current connection. When not in the scope of the WiFi, it will be automatically 3 G/EDGE.

• Question about connecting to the DB without earphone in Solaris

  Am pretty new to Solaris and I know how it works in Windows - please help.

  When I set ORACLE_SID am NOT able to connect to the DB, but system@ORACLE_SID works fine.

  The DB is running, logged in the same terminal SSH, tried all the upper/lower case for SID

  $ export ORACLE_SID=ORCL
  $ echo $ORACLE_SID
  ORCL
  
  $ sqlplus
  SQL*Plus: Release 10.2.0.3.0 - Production on Wed Sep 10 08:36:40 2014
  Copyright (c) 1982, 2006, Oracle.  All Rights Reserved.
  Enter user-name: system
  Enter password:
  ERROR:
  ORA-01034: ORACLE not available
  ORA-27101: shared memory realm does not exist
  SVR4 Error: 2: No such file or directory
  
  Enter user-name: system@ORCL
  Enter password:
  Connected to:
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  SQL> select * from v$instance;
  

  When you use sqlplus to connect to the LOCAL database (do not use SQL * Net), then you can use the same version of sqlplus that comes with the database you are trying to connect.

  You can only use sqlplus v11.2 to connect to the LOCAL V11.2 database.

  You can only use sqlplus v11.1 to connect to the database LOCAL V11.1.

• A few questions about Connect Pro

  Hello. We are interested in the implementation of a Web-based solution for the webinars where make us teaching sessions (training for adults). We have an instructor who wants to do a webinar with the following requirements:

  • She wants to have a class of participants on-site, but also be able to broadcast to the users of the Web. How is that possible with Connect Pro? A webcam is stationary, so we will need to have a camera that follows she took while she speaks and that stream via Connect Pro somehow.
  • She needs to share videos with the students. What is the quality of the video shared via Connect Pro?
  • Must all participants be computer headphones to be able to talk to him? Or the microphones/speakers built into computers creates a problem of echo?
  • If it has two others who will speak at the presentation, each of them need a named license?

  Thank you for your help.

  Hopefully, I'll share some teaching experiences Connect direct and through remote sessions:

  1. A mixture of teaching can be a delicate balance. better to have someone manage the cats Q & A and fileding quesitons. There are a of highend video conference cameras that track automaticall; It can be more profitable with a real person follow his movements through the room.
  2. The shared maybe video not HD quality. Best quality captured, better they see. Overall, the video I have is at the same level as the standard web videos. Best quality will require more bandwidth.
  3. Headsets are recommended. If they use the built-in microphones, then at the very LEAST they should use headphones in order to minimize the problem of echo. If those who speak are in the room, they should certainly use helmets.
  4. No, they don't need a special license to talk. Microphone rights can be given to each participant. Presenters automatically have these rights.

  Hope these answers help.

  John Gianopoulos

  Adobe Certified Instructor

  Technical systems Métrostar trainer

• R12.1.1 about connection after upgrading 11.5.9.2

  Hi all
  We were faced with a 11.5.9.2 update > 12.1.1 here for a few weeks. It all started during the installation of rapidwiz could not correctly create the login page at its controls. Due to lack of time, we cancelled the part (I know, not the best thing, but had no choice) and continued on with the 12.1.1 patches.
  
  This seems a little strange, but we can only login once and only after doing some things in the following order:
  
  (1) order process manager (apache)
  (2) deleted the folder _pages
  (3) update the ojsp with drain option
  (4) jcache cleared on the client
  (5) start the process manager
  (6) we can connect once, but get an error message when you try to load one of the forms: "FRM-40010: cannot read the c:/oracleapp/apps/apps_st/appl/fnd/12.0.0/forms/US/FNDSCSGN form.
  (7) then, when we are trying to identify a second time, using a fresh brower, we get: could not generate the redirect URL. Exception: oracle.apps.fnd.common.AppsException: oracle.apps.fnd.common.PoolException: failed to create new database connection: FNDSECURITY_APPL_SERVER_ID
  
  
  Our environment: W2003 Apache/forms and all the rest is on HP - UX.
  
  Desperate for an answer... Thank you...

  Colin,

  ERRORMSG: appsborg2.zip not found

  Please see if (Note: 804164,1 - AutoConfig fails on Txksetconfig.pl: "Appsborg2.zip not found" after Patch 10.1. 3.4 "") is applicable.

  Kind regards
  Hussein

• Don't forget about connections to the sites disappeared

  Firefox 43.0 will not store my passwords any longer. See the image...

  Hello, firefox will not save your passwords when you put to execution in permanent private browsing mode ("never remember history" in options > Privacy panel).

  Privacy, historical settings of navigation and-no-track