About the power of the UCS

Similar Questions

• Satellite Pro S300-10J - Question about the power of the microphone

  Hello!

  I would use my S300-10J for acoustic measurements on the speakers. (DIY)

  For this configuration, I am using a microphone electret, the IBF EMM-08:
  http://www.etfacoustic.com/micpreamp.html

  for power, it's what suits him: 1.5 - 10 v / approx. 0.5 my

  The s300-10J who provides or not?

  Anyone who can recoomend a card external sound that has this provision? (if my laptop does not work)

  Thanks in advance,
  Bart Segers

  Hello

  I can't give you details on the microphone of the satellite Pro S300 tension because I didn t find all the details about the tension of mic jack, but I guess that it s a voltage standard as on others, laptops different.

  As far as I know the external portable media microphone who need 1, 5V DC.
  So I guess that the S300 this support too.

  That's all I can say about it.

  Welcome them

• Questions about the replacement of a power supply for a P7-1235

  I decided to do an update on my Pavilion P7-1235. I put in a graphics card and put in power level. After doing some research on this forum and others I know well enough that I need. The only question I have is about the food. I don't know what the original power supply. There is a vent on the side where it however. So I guess that there is a fan on this side of the power supply. This eating plan I get:

  http://www.Newegg.com/product/product.aspx?item=N82E16817139050 & TPK = % 20500% 20% 20modular %2 watt Corsair...

  I noticed that the fan is on top? Now there is no high ventilation in my P7-1235, I worry for nothing? I think that all the supplys to look the same. What is the top of the fan page for? Or can anyone suggest a replacement perfect for my exact Pavilion model?

  Sorry if the questions are stupid, but I'm still learning and want to do what I can myself!

  Hello

  Yes, you can use the power supply the same way. The image is in a vertical position for the convience of the buyer. I have the same with number of power supplies and it was fine. You can check the following links people have set up exact POWER supply in different ways.

  http://pcpartpicker.com/builds/by_part/Corsair-power-supply-cx500m

  However, please be aware of your power supply size and your case. If you have all materials/components in stock for your computer, then it is what it is;

  ATX case:

  : Height 39.4 (15.55 inches)

  Width: 17.5 cm (6.89 in)

  Depth: 40.9 cm (16,14 inches)

  PSU stock:

  (5.9 x 5.5 x 3.4 inches)

  And the power supply you want;

  Corsair size;

  "5.9"x 3.4"x 6.3"

  As you can see the length of the Corsair is considerably larger than your stock of power supply. This could hampor of air or could even make it so the holes of the PSU and the case does not match. However, this is usually not what worry. The height and width that should be worried because the length rarely causes problems, I wanted to just make sure that you knew in advance.

  Take advantage of your power supply; Corsair is a great brand.

• The question about the interconnections of fabric UCS 6300 Series

  Hello

  I have a question about UCS 6300 Series fabric interconnects. Is this fabric UCS interconnections 6300 series integrated into the extension of tissue function?  The reason why I asked this question was, when there is 6300 series fabric has been plugged UCS 5100 chassis, there is no more space to plug in extension of UCS 2200 series fabric. My understanding on the topology of the UCS, tissue extender is the connection between the blade and the fabric of the interconnections.

  Thank you

  Bob

  Hi Bob

  Yes, that's correct!

  The chassis so called FI - IOM (see attachment p52); THE IOM = FEX.

  I/O of the blade adapter to connect inside basket chassis, which connects to the built-in IOM.

  IOM is then connected to the built-in FI.

• What kind of PDU like people for the UCS?

  I intend to deploy a UCS in the next month.  It seems that every UCS chassis requires four containers of L6 - 20.

  And we get two chassis.  While I was trying to get a couple of Pulizzi as ounces below.  Anyone prefers another

  type for better management or other reasons?  Also - L6 - 20 power is only option for the UCS?  Thank you.

  http://powerquality.Eaton.com/ePDU-LPC208-2p.aspx?CX=3

  There is a 110 plug in a PDU specializes in the basket.  Check with your Cisco representative for the part number - it works fine.  We have deployed about 100 chassis and it worked very well.

  Linda

• Ask about the feature find my phone

  Hello Apple support Team,

  I have a question about the find my iPhone feature which is as follows.

  -If I had put in place the "find my phone" feature when I bought the iPhone and did not open at all in 2-3 months. So that the disconnection of the app itself?

  I ask this because my phone got stolen yesterday and looking for opportunities that could have gone wrong.

  On my laptop, I'm always a corner of yesterday in front of https://www.icloud.com/#find to find the location, but its doesn't help not.

  (PS: this my second time that find my iPhone is not useful for me, I really wish that Apple must lock the turning the option off when the phone is in mode Code (lock mode))

  Waiting for your response.

  Thank you

  Ravi

  If you enable find my iPhone, it will be on except if you have disabled (requires your password to iCloud).  The location will only show if the phone is connected to a network and still has the power.

• Question about the temperature of the processor and the use of Vista on Satellite Pro M70

  Hello

  I have Satellite Pro M70-113 and it has Intel mobile Pentium 1.86 GHz CPU.
  The problem is that its normal temperature is 80 degrees Celsius... while I use the browser and other common programs...
  and recently it automatically shut off twice and pressing the button works / stop won't turn on... when I unplugged, replugged the power cord so I could only turn it on...

  And while playing games, it would of course go above 100 degrees...

  So you know what is the max temp through which the CPU can go without stop or damage the CPU or surrounding a circuit?
  I know that when I bought this laptop about 2 years back... it was not warm this...

  And by the way this laptop came with WXP Pro preinstalled and doesn't show any vista capable logo (because at the time, there was no such promotion of Microsoft, as it was the year 2005, Nov).

  Now, I use vista and upgraded to 1 GB of RAM and I have no problem using the Vista pc.

  Secondly, I did not update my BIOS to version the most recent is available.

  Although I'd love to have updated the BIOS but I worry about the bad flashing and says BIOS driver update page that the version of the BIOS doesn't support vista - whatever that means? If I go back to Windows XP Home edition after installing the BIOS for vista, the pc will not be usable for WXP or what?

  Is there any link to the processor heats to the old version of the BIOS, I'm still using... will update BIOS facilitated the temperature?

  Please answer.

  Thank you.

  Hello

  Wow, you have a lot of questions. :) If I was sort of a support guy to it all with such question much. ;)

  No, I'm kidding; with regard to your questions:

  First of all you must clean your CPU cooling with compressed air, because if the breakdown is clobbed with dust and then it s just logical that your processor is a little bit more 'hot' then 2 years before.

  The max temp is available on the website of intel. I think that the section is called "intel spec finder" or something similar.
  With Vista and bios: you need to update your bios, since then some improvements are making more compatible bios for vista.
  But don t worry, XP won´t be unusable if you update your bios, the bios-update brings improvements for vista, but does not degrade anything about XP.

  If the bios update will solve this temporary problem is not clearly, rather a cleaning as I told you will be better.

  Welcome them

• gauge the battery to the boot screen and battery on report menu conflicting Details about the level of the battery. The gauge from the battery to the Starter incorrectly displays the low battery level that prevent the macbook pro battery retina start

  gauge the battery to the boot screen and battery on report menu conflicting Details about the level of the battery. The gauge from the battery to the Starter incorrectly displays the low battery level that prevent the start of the battery. This happens on macbook pro retina 13 inches

  When I try to startup macbook pro retina in battery mode, it will fail to start showing low battery level and an indicator to recharge the battery. It does not start on battery. When I then connect via the power cable at startup (and check the battery level), monitor of battery in the menu bar indicates that the battery is charged to the top.

  It gets really frustrating and remove my ability to use the macbook pro retina as a truly portable device...

  Appreciate any help on this

  Have you tried resetting the SMC? Reset the management system (SCM) controller on your Mac - Apple Support

• Try to find information about the HP Pavilion DV6000 series

  Anyone know why it is so incredibly difficult to find information on the HP website about the series HP Pavilion DV6000 of computers, and where I can find if it still exists?  I have found information on other sites that indicate enough although this computer of fixation for a sis friend hopeless and I am inclined to agree with what I've seen so far, but I can't find the lists of computers that are supposed to exist indicating which computers are supposedly devastated with this 'hopeless problem', it is currently impossible for me to confirm the verdict.  I prefer finally reach my own conclusions using as much information that I can possibly understand rather than simply using opinions limited to some people, and that is why I would be very happy for any information you could give me on this issue.

  The system in question is HP Pavilion DV6000 series with a specific model of DV6405US number and the system shows that it is well powered food, but when you press the power button, the only thing that happens is that the battery light flashes three times and then absolutely nothing.  If I try the system on battery only, I get no response whatsoever, and I get same answer on AC power only.  I only get the flash answer three with AC and battery connected, and that's the only answer I got from the system.  This answer will repeat as many times as I press the power button.  I tried unplugging all sources of energy and don't let the rest of the system for an hour, by pressing the power button for about a minute, reconnect the power supply and I still get no results whatsoever, unless I have reinstall the battery.  At that point, he returned to simply give me only the three flashes of light battery.

  I don't know of a list of anywhere that gives all of the models affected by the Nvidia gpu failure, but I can tell you that the DV6405US has the Nvidia GeForce Go 6150 , which is well understood. Models with this gpu have been included in a regulation by Nvidia that include spare laptops. Unfortunately, the deadline under the regulations is long expired.

  Several members have used the service of repair HERE and reported excellent results. And before you ask_no, I am not affiliated in any way with this service. I simply have viable options for owners to post this problem and have seen its results. One of my personal friends even recently used his service and was very happy.

• Is there a documentation about the configuration of the function keys (program)

  Is there a documentation about the configuration of the function keys (program).

  Dell Dimension 1400, model XP SK8110 keyboard.   Yes, I know there are 7 years old, but running like a champ.

  Hello

  You can use various function keys to activate certain features and commands only. The following list details the current functions keys, what they do, and when you can use them.

  Three keys can be used when Setup is loading and when you are prompted to press the F6 function key to install some third-party small computer system interface () SCSI and host controller drivers:

  • F5 - for computer type or hardware abstraction layer (HAL) selection
  • F6 - to install the SCSI controller drivers and third-party host
  • F7 - to run Setup without Advanced Configuration and Power Interface (ACPI)

  When the "Welcome" screen is displayed, the following function keys can be used:

  • F2 - to automatically start the process (ASR, Automated System Recovery).
  • F10 - to bypass the menu screens and to load the Recovery Console

  During the GUI (GUI) - Mode Setup, the following function keys can be used:

  • SHIFT + F10 - to enable access to a prompt during the installation in graphical Mode
  • SHIFT + F11 - to display "old" wizards that give more detail.

  Thus, it is not possible to configure the function keys to perform this task. However, you can use your favorite search engine to perform this task.

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Question about the charging light on the venue Pro 11 (5130)

  I'm curious... read these discussions in recent weeks... found this work with the Tablet for about 2.5 hours after... I was up to 75% of battery. Connect the tablet to install a software... noticed 75%, not charging. Stop... removed the battery and put it back... He then read 75%, in charge. OK... so what's fixed now... a question about the manual of the system. Said that when the battery is charging, a white light is supposed to be on... where? When that I start, I see a momentary white light at the top of the screen, by the front camera... but when it is plugged and the loading and off... white light no.... No a - I misread? Thank you

  Light (color is white when the load) is located next to the power switch (top, right). Mine re-load very fast.

  White light goes off (or does not) when the Tablet is fully charged (the light on the charger is always on when it is plugged into the outlet)...

• Cannot save the UCS of CLI field

  Hello

  Connected in the UCS by CLI Manager.

  Try to run the command to register the domain UCS UCS central.

  SSH in the UCS CLI Manager, I run the reach system which brings me to regroup name\system #.

  When I try to use the command create ip_address political control-ep.  I get an invalie error marker

  If I do a creation? I do not get an option to create a policy of control of the EP

  Any help would be great.

  Thank you

  Hello

  What UCSM version are you running?  It looks like you can have a version prior to 2.1, who does not have the ability to integrate into the power plant of the UCS.

• Kingston memory for servers in the UCS

  Hi all

  Can I use Kingston memory in the UCS servers? The price difference is about £100 per module!

  The servers are still in warranty and this will affect?

  Thank you

  Not supported! Managing memory (Cisco) is listed in the functional specifications of the blades.

  http://www.Cisco.com/c/en/us/products/servers-unified-computing/UCS-b-se...

  If you install memory not Cisco, guaranteed material blade will be gone ;-)

• Why finder hide Documents and office files in the home directory of the user by activating iCloud drive? What about the behavior of Time Machine backup or third-party applications?

  I'm under MacOS Sierra. I am connected to my iCloud account. I activated the option Desktop and Documents, but I did NOT activate the option optimize Mac storage, because I wanted to make sure that all my files would be available locally, just in case, I would need to work without an internet connection.

  -J' noticed there now a menu iCloud in my sidebar in the Finder, with links to Documents and desktop.

  -J' also noticed that Documents is no longer presented in my favorites in my side bar of the Finder.

  -This last suggests that files saved in 'Documents' are not saved more on my HD... but only in iCloud, which isn't what I want.

  -Then, sailing in the Finder Macintosh HD/users / 'My account' /, I noticed that my Documents and desktop folders are more visible, as if these files are not saved in my home folder most. Which raises the question: where are My Documents and files on my HD, so they are still?

  -Using a shell session in the terminal and again navigate to/Users / 'My account' /, I noticed that my Documents and desktop folders are still there. Which suggest that records and records of office reside actually still in my home folder under users, but Finder actually hide it and present them as being stored in iCloud only disc. It's very confusing.

  This raises several questions:

  -In the first place, why Apple hide Documents and office files in the directory? Why not view these folders in iCloud and directory?

  -Whence the iCloud folder or drive, reside actually on my hard drive?

  -What time Machine. Is it still back up my document files and folders?

  -What games third-party app mirroring backup of My Documents files and folders? They still work properly? (I use Livedrive backup and Sugarsync for files mirrored across several macs).

  -How can I understand that Apple is doing with my folders and files? Some users might be happy with the iCloud drive concept, without worrying about how it works, but I don't take chances, and I want to keep a good understanding about the functioning of my system.

  Could someone explain what is exactly happening?

  With office and selected Documents, access to these files are now in the iCloud Drive, not in your home folder.

  My guess would be that they do not appear in your file because it would be confusing for many people to make them in two places.

  If you want in the Favorites, open iCloud Drive and drag them in the sidebar here.

  All about iCloud drive has been saved on your Mac. With the exception of the office and the Documents, they are in ~/Library/Mobile Documents. However, if you choose optimized storage, older documents are removed from your Mac. I don't know what is "old".

  ~/Documents and ~/desktop have new metadata indicating probably Finder does not display them in a Finder window, only in iCloud drive. They are not hidden in one of the normal methods of unix.

  I have not tested Time Machine or any other backup program. The folder still exist in your directory home, and they still have all the files, I don't think that changes anything.

• Cannot see the details of the certificate when you try to display more information about the certificate. Need a fix as soon as possible!

  When you click on the padlock to the left of the URL > right arrow > and then click more information > to view details about the certificate Details page > view certificate, I see nothing and nothing shows me the certificate. I need this job to be able to view Details of the certificate and encryption information pages

  Hmm, you are using the all-in - One Sidebar extension? It has a compatibility issue with the Page Info dialog box in Firefox 42. See: FF42 - view Page Info - media tab is missing.

• Microsoft Silverlight will / can send information about the people and the info on their computer. What are the plans for Firefox to protect its community of users of this?

  After reading the privacy statement from Microsoft regarding their Silverlight 5, it has troubling information about the loss of his privacy, under the "collection and use of information...". "the personal information and the information on my computer! In addition, information may be stored outside of the United States! (paragraph 4 under "collection and use of information... »). As part of the FireFox community, what other options do we have?

  P. S.
  I clicked on "Shared Data" on my Firefox browser, that means all average data? All good or bad I should know about?

  Hello 010matrix010, firefox will not run on the default Web sites, but only silverlight content when a user activates explicitly the plug-in through the icon in the address bar or click on the embedded content.
  also the support for plugins like silverlight in the browser will be dismantled at the end of next year: https://blog.mozilla.org/futurereleases/2015/10/08/npapi-plugins-in-firefox/