Kingston memory for servers in the UCS

Similar Questions

• Then all HDDs to SSDS used with all servers of the UCS?

  Hello

  I wonder if (UCSC-C220-M4L) accepts four SSD HDD model (UCS-SD400G0KS2-EP)

  Can anyone provide a matrix or a personal experience.

  I know that this SSD model works very well with the server blades (B200), but what about RACK servers?

  Hello

  That the PID is here ... http://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-com  So yes, it is supported.

  Just go to the link above and click on "SELECT the (HDD) HARD DRIVES or DISKS SOLID STATE (SSD)" on page 2 and will take you to Table 10 on page 29.

  I hope that answers your question.

  -Kenny

• Best practices for Architecture of the SOA suite domain

  Hello

  What is the best design of cluster for Oracle soa Suite of BAM and OSB Pentecost?

  I think so

  1 cluster for servers in the osb

  1 cluster for servers in soa

  1 bam_server

  or

  single cluster server soa and osb

  What is the best solution?

  The reference topology is separated clusters of weblogic for soa, osb, and bam... Take a look at the Enterprise Deployment Guide...

  http://docs.Oracle.com/CD/E28280_01/core.1111/e12036/TOC.htm

  Look...

  Expand the field of SOA components

  Extend a SOA to Oracle Service Bus domain

  Extension of the scope to include BAM

  See you soon,.

  Vlad

• How to change the ucs for esxi 5.1 hba queue depth

  Hello

  How can I change the depth of the queue for a host in 5.1 for ucs b200 esxi?

  In esxi

  I type esxcli system module settings - list m

  It shows

  ~ the list of parameters of module system # esxcli fnic m
  Value of Type name description
  -----------------------  ----  -----  -------------------------------------------------------------------------
  uint fnic_fc_trace_max_pages Total allocated pages of memory for the buffer of trace fc
  uint fnic_max_qdepth depth of queue in the report for each LUN
  uint fnic_trace_max_pages Total allocated pages of memory for the buffer of trace fnic
  initial heap_initial int heap size allocated for the pilot.
  heap_max int maximum size of the available heap for the driver.
  the pool of skb_mpool_initial int size drive minimum private socket buffer memory.
  skb_mpool_max int size maximum achievable private socket buffer memory pool for the driver.
   
  How can I change it and what is the depth of queue recommended?

  Was taken before, see for example

  https://supportforums.Cisco.com/discussion/12215126/queue-depth-executio...

  https://supportforums.Cisco.com/discussion/11744776/UCS-HBA-queue-depth-...

• Best practices for the Manager of the Ucs to the smooth running of our environment

  Hi team

  We are remaining with data center with Cisco Ucs blades. I want the best practices guide Ucs Manager Manager of Ucs check all things configured correctly in accordance with the recommendation of Cisco and standard to the smooth running of the environment.
  A certain provide suggestions. Thank you

  Hey Mohan,.

  Take a look at the following links. They should provide an overview of the information you are looking for:

  http://www.Cisco.com/c/en/us/products/collateral/servers-unified-computi...

  http://www.Cisco.com/c/en/us/support/servers-unified-computing/UCS-manag...

  HTH,

  Wes

• recommendation of the memory for the guest operating system

  Hi guys,.

  I need some advice

  I have a pile of vsphere 5 made of 2 servers on each server that I have on 5 VM

  (1) domain contoller 2008 standard edition + dhcp + dns

  2) exchange 2010

  (3) file server

  (4) primavera

  My question is what is the recommended memory and cpu for these VM configuration? I'm a bit confused

  What happens if I don't set up the limits and booking hotel and leave all default? What is the point of the week in this configuration? If I leave all default each VM does not use memory a cpu as it needs?

  Thank you specify in advance

  To add the tips of memory... Many people allocates memory for the virtual machines that will never be used, and ultimately you consume the memory of your host much faster than necessary. Start low when allocating memory to a virtual computer. Adding memory is simple to make, after you have collected on the functioning of your host performance data. The Performance tab will show you what is happening.

  Mike

• Reservation of memory for the server sqql

  Hello

  I am running two SQL servers with 4 virtual CPUs and each has 12G of RAM available.

  We have noticed that sql process uses only 180MB of RAM while SQL is designed to use all available memory... We decided to use a reservation of memory for these boxes and grant a full 12 GB for each booking.

  (1) that would be really useful?

  (2) I noticed that after having reserved memory, that the system has taken something like 10 minutes to start, can anyone explain to me why?

  Thank you

  The shares of resources can be adjusted if necessary. I don't think that you need. As well as the host has only a single virtual machine now, who knows what the future may bring. You add multiple virtual machines and you will start to do the math. ESX let his work resources and balance. If you see performance degradation then start looking at the distribution of resources.

  As for the CPU that the virtual machine is not the only object on the system might compete for processor resources, you also have the SC. When you give the VM 4 vCPU find the system to wait on the availability of all hearts.

  You can reduce the number to 2 and even play with the processor affinity if you want, you should try to determine the weather your SQL system really needs the CPU/MEM tweaks (in my experience IO is the cause of the headache of performance most SQL).

• My Mac has 4 slots for memory, 2 slots hold 4 GB of memory each.  In the empty slots add 8 GB in each of them?

  My Mac has 4 slots for memory, 2 slots hold 4 GB each.  Can I add a 8 GB memory in each of the empty slots?  I can add memory higher in the empty slots or what I need to keep all memory equals 4 slots 4 GB each?

  It depends on what iMac you have. Some older models may not recognize 8 GB of memory chips.

• Question about the upgrade memory for my Satellite M40-307

  Sorry for the newbie question. But if I have 512 MB of memory for the time being, what are my upgrade options?

  Do I have to buy pairs of memory? So I can or buy 2 x 1 GB = 2 GB, or 2 x 512 MB = 1 GB + 512 existing. Or can I say just buy a single 512 MB or 1 GB chip?

  Since no one wants to answer:
  1. check if your laptop supports Dual Channel Ram (it should be, but just see the manual to be sure)
  2. knowledge of what type of RAM you have. This will add or remove a possibility of upgrade

  The thing with Dual Channel is, that you have the best performance if you use 2 RAM of the same type (really of the same type: company, size...)
  you could:
  3. Add a 512 MB of RAM of the same type you have
  3 b. buy 2 pieces of new RAM of the same type (1 GB + 1 GB, or 2 + 2 GB) and do not forget that your laptop supports this quantity (once again: manual to check)

  You will also find in the manual, if your computer supports DDR or same DDR2 RAM (faster)

  If you have lost your manual, you can download it here on the toshiba Web page

  I hope I could help a little.

• Can I replace the memory and not lose what is on the old memory for a Mid 2007 Mack computer desktop Intel Core 2 Duo, 2 GHz processor speed, 1 CPU, 4 MB of Cache L1, the 4 GB memory at 800 MHz bus speed.  Only 1 slot can play memory, the other is damaged

  Can I replace the memory and not to lose what's on the memory of the former?  I have a Mid 2007, 20 "desktop Mac, Intel Core 2 Duo, 2 GHz processor, 1 CPU, 4 MB L2 cache, 4 GB of memory, 800 MHz bus speed.  I have a backup device.  A RAM slot is damaged.

  You are confused of RAM and disk space available.

  RAM stores information temporarily while the Mac is enabled and the application is reached. RAM replacement has no effect on the long term of your information storage.

  The hard drive is where your information is stored in the long term. If you replace your hard drive, you need restore the information from a backup.

  FYI, for your iMac, the maximum RAM is only 6 GB.

• View the size of memory for Equium A100-233

  Hi I have laptop very an Equium A100-233.
  In the specifications, it indicates that the built-in display memory can be up to 128 MB.
  The problem is that the driver has 64 MB max.
  As the memory is shared with the system memory, I guess I do need a MEMORY larger bar, so I put a 1 GB DIMM in there now, but it still says 64 MB max.
  So is there a setting I need to change to make 128 MB?

  I also think that you have the Satellite A100-233 and not a satellite.
  I put t found any unit Equium bearing that number.

  However, the specification says the laptop supports an Intel 950GM 8 MB to 128 MB shared memory.
  Upgrade memory max could be up to 4 GB. Then perhaps you need to install more memory to use the 128 MB

  But if it is not a special option for graphics memory changes so I assume that the driver will check the value of memory.

• Question on the module memory for Satellite A60

  I have a Satellite A60-352, and I was wondering if I can put my module memory of my laptop on my desk. And another thing, where I find the module in my cell phone because I'm not.

  Thank you

  Hello

  The fact is that the A60 was equipped with an internal memory (256 MB or 512 MB).
  This memory is not removable and so you only have one memory for an upgrade slot.
  Usually the A60 manages the PC2100 200 pin SODIMM (266 MHz) DDR modules.
  So, you can use the modules from different manufacturers that support the above specifications.

  Good bye

• Update the second slot memory for Satellite M100-221

  Good day, everyone!

  I'll expand the memory up to 2 GB (1 + 1 memory modules). But the second slot so that it is placed somewhere under the keyboard.
  1. exactly where?
  2. could you please help how to get it?
  I really have no desire to take apart the whole notebook!
  Maybe someone has the photos how to upgrade memory.

  Many thanks in advance.

  Maybe this page will help you http://www.irisvista.com/tech/laptops/Toshiba-Satellite-M105/take-apart-notebook-1.htm

  I have to write something. For RAM upgrade its slot on the low side and in manuals s is described how this should be done. I don't know if it is advisable to remove the keyboard because you can void the warranty valid. Maybe you should call the authorized service and clarify this before starting the disassembly procedure.

  Good luck!

• Extension of the memory for Satellite M70 207

  Hello

  I have the Satellite M70-207 with 512 MB of memory (DDR2 RAM) and I want to Add 1 GB of memory for this PC (total 1.5 GB).

  Can I add another memory (RAM) to this PC?
  and how?

  Thank you

  Hi guys

  I can confirm this info. You can certainly use a 1 GB module in a slot.
  The laptop is able to manage 2 GB max memory (2 x 1024 MB)

  As mentioned above the slit is placed at the bottom of the device and could be upgraded with modules like this memory: DDR2 400/533 1 GB (PA3411U-1M1G)

  Good bye

• What is the max memory for an iMac in early 2008

  What is the max memory for an iMac in early 2008? MacSales.com shows a 6 GB kit, but crucial only shows a 4 GB kit.

  Thank you

  John

  The computer iMac (early 2008) has two SDRAM slots in the bottom of the computer and comes with at least 1 GB DDR2 SDRAM installed into a slot. The maximum amount of RAM you can install in the computer is 4 GB (a 2 GB SO-DIMM in each slot).

  Source:

  iMac (early 2008): specification of memory - Apple Support