absence of use

Similar Questions

• Element of the absence

  Hello

  I need a reason to detail behind the configuration of the element of the absence.

  In the document ORACLE, I found that we can set the absence item in the category 'Win' or 'Information '. Although the intention of these 2 different categories, it is not unclear to me.

  We will define the management of absences for other than United States legislation. So input time sheet information is unnecessary here to treat the absence element. In the document, I had this
  including that if Scorecard required = none then other Information win the item.

  It is the only difference that I found so far.

  Could someone please clarify the other differences between this category?

  When do we use win as absence and when do we use the information item?

  Kind regards

  Rakesh.

  Hi Rakesh,

  Through this doc - have you been

  Almost everything you wanted to know about Oracle HRMS time paid off (PTO) (Doc ID 267289.1)

  If you want to pay employees for absences, then use the element to win.

  If you simply follow the absences, then use pieces of Information.

  Let's take an example-

  For hourly paid employees, you pay vacation pay. So if your absence is just information, then you must manually attach one more element to earn income to pay for the hours. But if it's an element of compensation, hours would be followed by the element and you can write a formula that would calculate HOURS * RATE for this item.

  For monthly fixed sal employees, you can have the item information.

  OR

  You can have as a winning item and do not attach any formula which he. Then it would be no different than the piece of Information.

  So, it all depends on how you want to pay and deal with these elements.

  See you soon,.

  Vignesh

• Check the number of consecutive working days of Absence from a list of dates (F

  Hi all
  
  We have Oracle 11.5.7 Application human resources and I have a request to create an Absence report (using sql * more coding, which can be downloaded on the discoverer to run the report by the user) as follows:
  
  Columns of the sample:
  ABSENCE_CATEGORY
  ABSENCE_TYPE
  ABSENCE_START_DATE
  ABSENCE_END_DATE
  ABSENCE_DAYS
  
  Sample data:
  EMPLOYEE A (FOR LACK OF PERIOD 2009)
  ABSENCE_CATEGORY ABSENCE_TYPE ABSENCE_START_DATE ABSENCE_END_DATE ABSENCE_DAYS
  Annual leave, April 27, 2009 April 30, 2009 4
  May 4, 2009 educational leave may 4, 2009 1
  Leave annual P 5 May 2009 may 12, 2009 6
  ...
  
  TOTAL: 11 DAYS OF CONTINUOUS WORK ON LEAVE
  NOTES:
  MAY 1, 2009 HOLIDAY
  May 2, 2009 weekend & may 3, 2009
  Weekend May 9, 2009 & may 10, 2009
  
  B EMPLOYEE (FOR ABSENCE PERIOD 2009)
  ABSENCE_CATEGORY ABSENCE_TYPE ABSENCE_START_DATE ABSENCE_END_DATE ABSENCE_DAYS
  Annual leave, may 18, 2009 may 29, 2009-10
  ...
  TOTAL: 10 DAYS OF CONTINUOUS WORK ON LEAVE
  
  
  C EMPLOYEE (FOR ABSENCE PERIOD 2009)
  ABSENCE_CATEGORY ABSENCE_TYPE ABSENCE_START_DATE ABSENCE_END_DATE ABSENCE_DAYS
  8 June 2009 annual leave June 17, 2009 8
  ...
  TOTAL: 8 DAYS OF CONTINUOUS WORK ON LEAVE
  
  IF AN EMPLOYEE HAS TAKEN MORE CONSECUTIVE OR 10 WORKING DAYS SHOULD BE EXCLUDED FROM THE STATE.
  THAT IS WHY IN THE EXAMPLE ABOVE ONLY USED C MUST BE RETURNED BY THE QUERY.
  
  Ideas/comments if and how to achieve the highest performance will be much appreciated.
  Thanking you in advance,
  Best regards
  Elena

  Hello

  Cannot start a command with the keyword WITH in SQL * Plus 8 (or earlier).

  The best thing to do is to install a later version of SQL * Plus or SQL Developer. (You can have several versions, if you need. SQL * Plus 10 and more will not work with an Oracle database 8)

  Otherwise, you can re-write the query so that the command does not begin with the keyword WITH.
  For example:

  SELECT  *
  FROM    (  WITH A AS ...
          );
  

• Satellite A-P70-11V - HARD disk protection works without accelerometer?

  Hi all

  I'm new here.
  I did another post. In short, I'm expert enough in Toshiba Satellite laptops, but my new, Satellite P70-A-11V, a portable high professional range, had some problems. It came with Windows 8, which I upgraded to 8.1. Unfortunately, the degraded system so bad that all pendrives made plant. I have connected my Toshiba camcorder, and it also crashed the laptop.

  The search indexing was not working outside the C: drive. The pointer of an optical mouse has started to freeze for seconds on the screen.
  This last I believe was due to the low power USB ports.

  So, I really had no choice after 2 restorations system total and installed Windows 7 Enterprise x 64 SP1. Operating system almost seems ok, but I still have problems, and one of them is that but I'm trying to install the accelerometer utilities, there is no driver.

  I tried that Windows 8 x 64, but just, it does not appear on the list of services.

  I found that the utility of the HARD disk protection was also arrested, I searched this forum and someone said that the Intel Rapid Storage technology must be uninstalled. I did and my HDD is running... but I don't know if it's effective!

  I remember with the 8.1 Windows, the utility always shown a message on the upper right: Vibration is detected, the drive is temporarily closed, etc..

  She has been associated with some high tone sound indicating that the drive has been effectively stopped. Now I can shake it off the laptop, but no message appears, there is no sound.

  I checked all the boxes on the interface of protection of HARD drive to indicate if there are vibrations, but so far nothing. The drive protection is in place and running, but in the absence of use of the accelerometer, the protection of disk HARD just don't know when to act.

  Am I wrong? Can Toshiba fix this?

  All responses are greatly appreciated.

  Hello

  Toshiba drivers and tools available to win 8 or 8.1 to win are not entirely comparable with Toshiba available for Win 7 OS software.
  Some drivers and tools that are available to win 8 don t exist for the Win 7 system.

  For example; commercial accelerometer or HDD Protection Utility released in particular to win 8 / Win system 8.1 and are not available for Win 7.

  But for Win 7, you can find the Toshiba VAP (value added package) and this package installs a range of important services that are an essential component of the Windows system and this PPV will perform the other original programming TOSHIBA works correctly.

  Therefore, you must install the VAP as Toshiba's first tool to ensure that other software such as HDD/SSD Alert Utility or PC Health Monitor

• Problems with Bluetooth connectivity

  For years I tried to get some Bluetooth designs to work on Windows 7.  I had never succeeded and was convinced, it must be a hardware problem, but a new network controller does not solve the problem.  Even a mouse brand Lenovo brand new, I bought has never been able to connect.  After having tried several forums and proposed corrections, I came finally on a dark patch using MS services to reset the password to logon.  Finally, I was able to use the mouse, I bought about 5 years ago.  This hotfix now allowed me to use my bluetooth designs as I should.  The absence of useful answers is troubling, but the fact that there is still the issue is even more troubling.  A quick search will show you how common is the prblem, and I think that NOT getting a bluetooth device to connect is more common than to make it connect.  Given how long the bluetooth has been around, I find this totally unacceptable, and it seems that MS is unable or refuses to address the issue.  So, what gives?  Is this a problem that will not be fixed anytime soon?  Even with the fix that I applied, bluetooth connectivity is never guaranteed to start, and I always ask myself if I have to go through to reset the password to logon through 'services', restart services, re-login to the design and reload designs them drivers.  I wish I could count on my legacy and connect without any additional steps.  Or I have to wait another ten years before the bluetooth is a viable technology?  I have a $25 speaker that always connected immediately, without fail once.  I think that MS could find a permanent solution to another perfect close of OS, or at least the best I've ever used.

  I tried to locate the forum which has the solution that worked for me.  Sorry for the late reply.  The problem occurred on a laptop Lenovo Y530 'Ideapad '.

  The fix involved using MS services to reset the "password" under: Bluetooth Support Service > properties > log (tab), select "this account", and then browse to (?) "Local service".  Remove password in local service and confirmation PW.  Select 'apply' and then Windows prompts you to restart the service for new PW.  Select 'ok', and then restart the service.  Once I did my bluetooth products have been 'discovered' and drivers would charge.

  Sorry I can't explain it better.  I'll try to find the real tutorial I used.

• Problem of SOUL for LOA

  Hi all
  I create rule for LOA with approval-group chain of authority Action Type, when I test in the Workbench to test what works well, but when I create the leave to the employee the SSHRC seeded rule rule serving more than 10 approvers in supervisor chain, I don't know why? could advise please?
  
  Please note that I use the following conditions in my article:
  
  WORKFLOW_PROCESS_NAME in (HR_LOA_JSP_PRC)
  HR_IS_LEAVE_OF_ABSENCE_SS is set to True
  
  and I delete the vluse HR_LOA_JSP_PRC of the seeded for the WORKFLOW_PROCESS_NAME condition
  
  
  Concerning

  Hello

  Have you checked to make sure that the function menu for the management of absences is using the HR_LOA_JSP_PRC process? Looking at my local instance (12.1.3) default HR_GENERIC_APPROVAL_PRC is used.

  You can also see in the URL.

  i.e.
  OA.jsp?page=/oracle/apps/per/selfservice/absence/webui/AbsenceHomePagePG...&pAMETranType=SSHRMS&pAMEAppId=800&pProcessName=HR_GENERIC_APPROVAL_PRC&pItemType=HRSSA&pCalledFrom=HR_LOA_SS

  Hope that helps.

• Removal of ICC profiles

  I watched other dicussions and can't find the answer to my questions (forgive me if I have somehow forgotten it and it is a repeat). * CS6

  How to remove ICC profiles. I'm working on a file to have printed business cards, the printer requires the removal of ICC profiles, but I have no idea how to do that.

  Thanks in advance!

  Edition > assign profile. In the dialog box that appears, choose not to manage the colors.

  At any time you can check the color profile or the absence of using this menu. When there is no profile it will say "Untagged."

  

• Full YR calendar & line generators - probs with mnths with 28/29/30 days

  Hello
  
  With the advice of the stem of the West, I was able to build a schedule for a absences state using generators on line, see the learndiscoverer blog (http://learndiscoverer.blogspot.com/2008/10/row-generators.html) for more details on the line generators.
  
  I hit a problem with the help of the dates as the basis for a data point (or a data point) in tables double entry.
  
  I am building a crosstab which must focus on the value of years of absence for one person. With the help of 2 line, 1 generators producing 12 months (last day of each month as a date, set shaped to fmMonth) and the other with 31 lines along the upper part for the days in the month.
  
  The data point is a calculation that inserts the category absence each day that a person is missing. This method works brilliantly for a month. However, the data point is a derivative of the month/year and 31 days, created by the line generator, which causes problems for some months.
  
  If, for example, I need to produce the report of January and February 2008, it will produce an error saying not a date valid for the month. This is because there are 31 days along the top and the data point is using 31 days in Jan and Feb. As there were only 29 days during the Feb 2008 the error occurs when the datapoint created 30-Jan-2008 & 31-Feb-2008.
  
  I tried to do the math datapoint return NULL for those dates, but it will not allow him because it is the data point must be a kind of date. I tried to convert these wrong dates to January 1, 1900 and then omitted in the report with a disease, I think that maybe it's the solution, but I don't get anywhere with it.
  
  If someone knows a better way to do this I would be really grateful if you could let me know.
  
  In addition, just another thing. Does anyone know how to format a date for a day in the format Mon, Mar, sea etc. I have a full day but need to the narrower columns.
  
  Thank you
  Lloyd Thomas

  Hello

  Well, what I meant is that the rows returned by the line generator determines how many rows there are in your report. You do not want a relationship with thousands of useless lines, it will slow down and make it unusable. So, you want to only create the lines you need.

  To create a line generate returns worth years of dates where you have a parameter, pyear, which contains the year (e.g. 2008) then you need a generator of line which returns lines at least 366. You can then generates dates using this calculation:

  TO_DATE ('01 - JAN-' |: pyear) + n-1

  where n is a number starting with 1 of your line generator.

  You then have a condition:

  TO_CHAR (to_date ('01 - JAN-' |: pyear) + n - 1, 'YYYY') =: pyear

  make sure that the correct number of dates is returned. As the condition uses the setting there need to be in the workbook and not the generator folder line.

  Rod West

• How to use the balance descending in the management of absences?

  Dear professionals.
  
  I'm in a learning phase exploring the management of absences.
  
  I have a scenario: I have to use the balance of decreasing absence
  
  Eligibility criteria:
  
  1 employee with Grade A will have 32 balance of leave per year at the beginning of the year
  2. employee with class B will have 24 balance of leave per year at the beginning of the year
  
  If an employee trips leave it will be deducted from the balance of leave and will be in the amount of net
  That is, if an employee with the class a student 2 day leave his net payment becomes 30
  
  This plan is expected to be completed at the end of the year, i.e. 31 December
  
  The beginning of each year of leave balances should get re-established.
  that grade A will be 32 and class B will have 24. No calculation necessary deferral.
  
  Y at - it suggestions, how to move forward?
  
  Kind regards
  Kathan

  Hi Kathan,

  Can you be more specific about what is criteria based on which it was decided that the balance of opening is 32 or 24 at the beginning of the year?

  For the requirement mentioned by you in your message. You can always do this by using the type of absence more in nature. but the choice is yours

  In your accrual to set a scale the accrual_value = 32/24 according to the criteria and the report formula that returns zero (as his minimum requirement for defining a plan of accumulation). According to your requirment you can not work report PTO processes because it is not necessary in your case.

  If you do not set an exercise plan, then balances will be not visible in the area of pay for and you will manage validations as someone no more than not the balance of the BG_ABSENCE_DURATION formula.

  As much the creation of link is being considered, it is always recommended that for the absence, you create a link to open. Manage the accumulator value into your formula of accumulation.

  It will be useful. Please do not hesitate to let me know if you need more details.

  Thank you
  Sanjay

• You cannot delete the pattern used to the absence of an employee

  We are on 11.5.10, there is one issued due to the Absence. Suggest, we created type absence as "Time off" and attached reason which is mentioned below. After a while, we decided to remove the specific reason so that this employee cannot select this reason while submitting to authorization through self-service. Although we have disabled that always shows the reason for the "ABSENCE_REASON" research but employee self-service creates leave.
  
  "However, when I try to remove holiday because of the type of absence as mentioned above, then system will trigger the message" error MESSAGE: "you cannot delete the pattern used to the absence of an employee.
  
  Reason
  1 accident
  Appointment 2.doctor
  3. others
  
  How can we remove the 2nd reason (doctor appointment) to the list even if it has already been used in absence transactions.
  
  Thank you.

  Have you tried to value in the research of reason for the absence of end date?

  Also clear the Cache before testing...

• Display on a monitor is not fully used. What should do?

  I recently bought a Mac mini (end of 2014)

  OS X 10.11.5 (15F34)

  I use a Samsung 19 inch monitor via mini display port to VGA.

  But the screen is not fully used (black on both right and left of the picture)

  When I go to about this mac > display, this is show 13.9 inch (800 x 600). I changed the resolution of 1280 x 1024 through the display preferences. But it is still not working and this mac > display, shows always 13.9 inch (800 x 600). The image is blurred.

  Help, please...

  You may need to buy a graphics card in order to use a different port on the computer.

  Check the display to see if there are other options of the signal may use another cable.

  A more recent model computer should be able to use a modern with Thunderbolt screen

  connections; Some cables with ends adapter for use with older screens may work

  If the display can be used in this way. Not all of the same works if an adapter may adapt to the form.

  • Apple Mini DisplayPort adapter: Frequently asked questions (FAQ) - Apple Support

  While I have two Mac Mini computers, one is a late 2005 and the other end 2012;

  both can use an HDMI adapter for a 19 inch Samsung works for these at full resolution.

  Mini-Display port to HDMI it works; If not, using lightning.

  One of my screens use one of these cards:

  Apple Mini DisplayPort to DVI adapter

  Some display models require pilots who would be obscure and not included with

  OS X; I have another Samsung that turns, it is supported but you must use a third-

  part control panel app in the old OS X 10.5.8 and OS X 10.9.5. The X OS

  controls brightness and resolution are limited without it.

  {Since the new Mac Mini is more beautiful with a movie theater 20 inch aluminum, it's what}

  He has; the older Mini OK with a Samsung 19 inch (square), and it uses

  control software for OS X settings cannot. Most recent can use Thunderbolt.}

  Not sure if your screen is oldest of those who may need a separate control software.

  There is a updated firmware for Mini Display Port to VGA (himself):

  On the Mini DisplayPort to VGA adapter firmware update - Apple Support

  If you see not all possible display resolutions in displays preferences

  It may be due to the absence of a favorite graphics card. Or a longer display limit.

  • The display of all the possible resolutions for viewing under Mac OS X:

  http://osxdaily.com/2015/08/27/show-all-display-resolutions-external-screen-Mac/

  • About the Mini DisplayPort to HDMI - Apple Support adapters

  You may need the machine support site to test technical research view if you

  not a page printed with line info specifications said. Several different adapters

  are available; You can even use a digital TV (limits) as screen.

  • Learn more about Troubleshooting display issues.
  • Learn what adapters are compatible with the specific Apple computers.
  • Learn more on Thunderbolt and displays ports.

  The technology of the adapter and display need to better match those of the Mini.

  Older tech display should be supported within the limits. Connections and drivers.

  PS: See if the update of the firmware of the adapter you have, will allow him to work.

  If the adapter is an Apple product, it would be able to accept the firmware.

  Good luck!

  edited 3 times

• Why not in the list of countries, the Azerbaijan and the Georgia? I am a citizen of Georgia, but currently working and living in Azerbaijan. The absence of these countries created barriers to e-payment. As I said I have currently in the territory of the A

  Why not in the list of countries, the Azerbaijan and the Georgia? I am a citizen of Georgia, but currently working and living in Azerbaijan. The absence of these countries created barriers to e-payment. As I said, I currently have in the territory of the Azerbaijan can't use Visa and Master Card and also problem with cards issued in Azerbaijan! What is the reason, can you explain?

  Hello

  It is a community of support based on the user, though I'm afraid that nobody here can speak you either the reasons for decisions from Apple or whatever plans unannounced Apple (for example, if and when pay Apple will launch in a given country).

  If you are wanting to see pay Apple throw in Azerbaijan and Georgia, you can let Apple know here:

  https://www.Apple.com/feedback/Apple-pay.html

• Redeclenchables pulse using GPCTR0 on 6062E STC

  I have the desire to have an external synchronization signal (too short a duration) detected by a jury of 6062E and output a pulse of longer duration as a timing signal that I would read on an analog channel as well as other sensors on other analog channels. I used the example program 2055.zip, STCgeneratesinglepulse, for LW/CVI as a starting point. I modified the sample program so that it is redeclenchables instead of just pulse. This code example uses GPCTR0. The program works but not as I expected. GPCTR0_OUT has the pulse output generated and programmable duration that I want. GPCTR0_GATE is the input trigger/sync signal. What I've found, is that the DOOR has a constant voltage of + 5V signal. The problem is that the only trigger that works is an intermittent grounding to the GPCTR0_GATE. I was keen to work with external synchronization signal (short signal down-up-down). I was using the DAQ card + PIN 5V power to mimic an external trigger. How can I use such a trigger signal to generate the impulse? I have included a stripped to the low, short version of the revised program sample below and also as an attachment.

  #include "nidaqex.h".
  /*********************************************************************
  * Sample program: based on 2055.zip
  * STCgenerateSingleTriggeredPulse.c //changed to redeclenchables
  *
  * Description:
  * Generates a redeclenchables digital pulse 1ms LOW and 100 ms HIGH aid
  * General counter 0 after tripping (for devices with the)
  * Acquisition of data-STC counters/timers)
  *
  * Pins of connection information:
  * Your digital output pulse will be on the GPCTR0_OUT pin (2 for 6062).
  * Connect this output to an analog channel for time synchronization w / normal DAQ.
  * Connect your trigger pulse for digital on PFI9/GPCTR0_GATE spindle (3 of 6062).
  * Plug the Locator on the ground at the 'digital ground' PIN (4 / 18 of 6062).
  *
  * To trigger, connected to pin 3 on the ground. But this isn't what I want.
  * Want relaxation to be a HIGH LEVEL of BASS. How?
  *
  * The presence or absence of next line had no effect.
  * Secret = GPCTR_Change_Parameter (iDevice, ulGpctrNum, ND_GATE_POLARITY, ND_NEGATIVE);
  *
  *********************************************************************
  * Used a second computer/data acquisition monitoring system.
  Monitoring system connected to the DAQ computer
  * ----------------------------------------------          -----------------------
  * ACH0 (68) GPCTR0_OUT (2)
  * Rider to DGND AIGND (67) (4) ACH8 (34)
  *
  * OR
  *
  * Use the counter on the second computer/data acquisition monitoring system.
  Monitoring system connected to the DAQ computer
  * --------------------------------              -----------------------
  * GPCTR0_OUT PFI9/GPCTR0_GATE (3) (2)
  * GND                                              GND
  *
  *********************************************************************/

  void main (void)
  {
  char c; for the test
  I16 Secret = 0;
  I16 iRetVal = 0;
  I16 iDevice = 1;
  ulGpctrNum u32 = ND_COUNTER_0;
  u32 ulLOWcount = 100;  1ms
  u32 ulHIGHcount = 10000; 100ms
  u32 ulLOWcount = 2;   0.02ms
  u32 ulHIGHcount = 10;  varied 0.1ms for testing
      
  Secret = GPCTR_Control (iDevice, ulGpctrNum, ND_RESET);
  Secret = GPCTR_Set_Application (iDevice, ulGpctrNum, ND_RETRIG_PULSE_GNR);
  Secret = GPCTR_Change_Parameter (iDevice, ulGpctrNum, ND_SOURCE, ND_INTERNAL_100_KHZ);
  Secret = GPCTR_Change_Parameter (iDevice, ulGpctrNum, ND_GATE_POLARITY, ND_NEGATIVE);
  Secret = GPCTR_Change_Parameter (iDevice, ulGpctrNum, ND_GATE, ND_PFI_9);  Gate, apply trigger here
  Secret = GPCTR_Change_Parameter (iDevice, ulGpctrNum, ND_COUNT_1, ulLOWcount);
  Secret = GPCTR_Change_Parameter (iDevice, ulGpctrNum, ND_COUNT_2, ulHIGHcount);
  / * To print a counter pulse, you must call Select_Signal. */
  Secret = Select_Signal (iDevice, ND_GPCTR0_OUTPUT, ND_GPCTR0_OUTPUT, ND_LOW_TO_HIGH);
  Secret = GPCTR_Control (iDevice, ulGpctrNum, ND_PROGRAM);
  printf ("apply your trigger pulse to PFI9 now. \nThe rising edge is armed and the second falling edge is in the value. \n") ;
  c = GetChar (); This simulates normal DAQ.
  Secret = GPCTR_Control (iDevice, ulGpctrNum, ND_RESET);
  / * Note that the following call to Select_Signal causes the
  output high impedance that will probably bring the logic
  HIGH level, if there is a pull-up on this PIN resistance. (Check your)
  Manual of equipment.)  If you do not want this behavior, comment
  the next line. */
  Secret = Select_Signal (iDevice, ND_GPCTR0_OUTPUT, ND_NONE, ND_DONT_CARE);
  return;
  }

  S_Hong,

  I solved my problem.

  I had in my code

  iStatus is GPCTR_Change_Parameter (iDevice, ulGpctrNum, ND_GATE, ND_PFI_9);.

  and was my trigger for entry. This is false because PFI_9 is an echo out of everything my trigger is connected to.

  I changed the statement to

  iStatus is GPCTR_Change_Parameter (iDevice, ulGpctrNum, ND_GATE, ND_PFI_0);.    for the source of the signal.

  and now a trigger on the PIN PFI_0 generates the impulse.

• Using an 53131A, how do I detect the condition of no input signal?

  Hello

  I use an Agilent 53131 A frequency counter to measure the frequency of the oscillator.  I need to be able to use the frequency counter to read the frequency when the oscillator is oscillating and indicate when the oscillator is bad (no signal present on the 53131A of entry).  Does anyone have any suggestions on the type of command I should use?

  FETCH?
  READ?
  MEAS?

  The problem I have is in the trigger.  When the oscillator is bad, the counter hangs up because she continues to wait for a trigger that will never come.

  Thanks for any help

  In fact you have right to the solution yourself.  You need to revise your release scheme or you can use the absence of trigger as your indication.

  For example: you know that the measure will have x seconds to complete if the signal is present.  If you need to determine whether the measure is right here.  Simple if you use GPIB-

  (1) set the property of VISA TMO to be as long as you wait for the measure.

  (2) enable SRQ on operation completes in the meter. (ATTENTION: make sure that no other instrument allows to block Service Requestby the meter setting as low as possible address)

  (3) when you send the boot command, you can query the status of the SRQ with the "wait for SRQ.vi" If no signal is present, then the wait fo SRQ will return with a time-out error.

  (4) clear the error since you know what caused it and send a clear command (* CLR) at the counter to return to the idle state.

  Alternatively, if the signal is present, the meter will trigger SRQ when the measurement is finished and you can then extract the memory reading.

• Pc tune up utility can I use to get the most out of my pc.

  I had avg pc tune up.
  now m using tuneup utilities.
  want a better.

  Hello

  It is best that you do not use utilities to tune-up, because these applications may incorrectly delete important files and entries that can leave your computer in the absence of priming.
  You can use the tools that are built into Windows, to increase the performance of the computer.

  Link to view:
  Slow PC? Optimize your computer for peak performance
  http://www.Microsoft.com/athome/Setup/optimize.aspx

  Hope this information is useful.