AC adapter / CC uninstalled

Similar Questions

• How can I reinstall the coz of isatap adapt #2 I already uninstall

  Hello Sir / Madam... pls help me on how to reinstall the microsoft isatap #2 adapter, I uninstall the card because to this day does'nt work... tnx for any response...

  Hello

  You don't want that it active so don't you worry about this unless you have found errors. If so see these threads.

  http://social.answers.Microsoft.com/forums/en/w7network/thread/754c8f29-3a87-4E77-Babd-a69c8910e17e

  http://social.answers.Microsoft.com/forums/en-us/w7hardware/thread/05a8849e-89c1-4CC9-8004-f6d07a4fdf8b

  http://www.cableforum.co.UK/Board/34932105-post6.html

  ====================================

  A new Microsoft 6to4 map is created unexpectedly after restarting Windows 7 or Windows
  Server 2008 R2
  http://support.Microsoft.com/kb/980486

  How to disable certain Internet Protocol version 6 (IPv6) components in Windows Vista, Windows 7
  and Windows Server 2008
  http://support.Microsoft.com/kb/929852/en-us

  Response of Lionel Chen
  http://social.technet.Microsoft.com/forums/en-us/itprovistahardware/thread/3a503cdb-e61c-44BC-97c4-0b38b0e5f929/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• HP Pavilion p6520y (win7) built-in wireless adapter will not detect ANY wireless network.

  HP Pavilion p6520y Desktop on Windows 7 Home Premium

  Error MESSAGE: "DO NOT CONNECTED - NO CONNECTION IS AVAILABLE" (from the tray icon of wireless with X red network connection).

  No changes to the system, in fact, it's brand new. I just want to use my built-in 802.11n Wireless LAN Card to connect to a network including all other PCs (laptops and desktop computers) can see.

  I tried a lot of things: toggle, adapter, adapter to uninstall/install, driver update (RT3090), PC restore/recovery, reset the router, change the configuration of the card (e.g., power management), all no. AVAIL.

  There is a port of type mini co - ax at the back of the tower for an ANTENNA which came with the PC. However, I think that the internal card could still detect a signal from 20 ft away without antenna. Isn't it?

  PROBLEM SOLVED:

  Of course, the last thing I mentioned was the cause. I have set up the office within inches of the wireless router and a signal (albeit low) was detected.

  So I guess the fixing of an antenna (which should have with my PC) will improve the signal reception when the office is further away (say 20 ft, or more). already checked radio shack with no luck.

  In any case, at least, I know what the problem is. Hope this helps someone in a similar scenario... See you soon...

• Wireless USB adapter does not

  Was in the middle of the viewing of a site when it went offline.  Reset router has not been set.  Software can not see the router and adapter shows no light.

  Is it possible to test this adapter?

  What is the model number for the adapter?

  You should try to uninstall and reinstall the adapter to do so follow the below mentioned steps.

  Remove the Linksys adapter and uninstall the Linksys software menu programs... Re - install drivers insert the CD of Linksys install in your CD-ROM drive, when the welcome is displayed click on exit, connect your USB adapter now... When the Hardware Update Wizard window appears, click on install the software automatically (recommended) and then click Next... Click Finish when the installation is complete.

  NOTE: The hardware installation screen may appear indicating that the adapter has failed the Windows Logo test. Ignore the window and click on continue to continue the installation because the adapter has been tested and it works with Windows XP. When Windows has finished installing the driver, click Finish.

  Click Start and go to control panel and double-click on network connections. Right click on wireless network connection, and then select view available wireless networks "-If you see your network wireless in the list, the highlight by clicking 'single' on it now, click on the 'Connect' button below-if your wireless network is secured, it asks you to provide the network key - provide the wireless network key and confirm again in the confirmation box and click 'Connect'." It should work...

• Adapter WiFi my laptop has suddenly stopped working.

  Operating system: Microsoft Windows 7 (32 bit)

  I was in the middle of my routine of navigation when all of a sudden:
  -My WIFI is out
  -Light network on my laptop (F12 key) turned RED
  -Not visible in Control Panel networks with wireless networks.

  I did something unusual or installed software or antivirus software etc., which could possibly cause this.

  So far, I tried on but none of them worked.
  -Deactivation and activation then the WIFI adapter.
  -Uninstalling, then reinstalling the latest driver for the WIRELESS card.

  -WiFi F12 key.

  Help, please.

   

  System Imformation:

  HP Notebook 1000 series

  Windows 7 Home Premium 32 bit

  RALink RT5390R wireless 802.11b/g/n 1 x 1 adapter

  I use my Microsoft Security Essentials antivirus.

   

  

  Umair salvation,

  Please provide detailed information about your question. I appreciate the step by step troubleshooting, and pain that you have taken to resolve your problem. However, there are a few steps more that we can try to diagnose the root cause of the problem.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. Are you able to connect any other wireless device to the same network?
  2. Are all the lights on the Modem/Router Green?
  3. Have you tried to connect your HP laptop with wired network? If so, was the same result?

  Problem with the random disconnection of a wireless network can be triggered for a variety of reasons. To find out the exact cause of the issue, I would recommend that you run the network troubleshooter utility.

  Network convenience stores

  This problem can occur if authentication enable IEEE 802. 1 X for this network checkbox is enabled. If this box is checked, but there is no server to authenticate the connection is interrupted. If you turn on the wireless network connection, it disconnects again after a short period.
   
  Method 1: Disable IEEE 802 authentication. 1 X

  To disable authentication IEEE 802. 1 X, follow these steps:

  • Click Start, type ncpa.cpl, and then press ENTER.
  • Right click on your wireless network connection and then click Properties.
  • Click the wireless networks tab.
  • Under preferred networks, click your wireless network, and then click Properties.
  • Click on the Authentication tab, click to clear the authentication enable IEEE 802. 1 X for this network
  • Check box, and then click OK twice.

  Method 2: Disable the IP assistance service

  • Hold down the Windows key and type R, type "services.msc" (without the quotes) and press enter
  • Scroll down to the IP assistance service, right-click on it and select Properties
  • In the drop-down list box that says "Automatic" or "Manual", set it to disabled and then click 'apply '.
  • Then click on "Stop" to stop the service from running in the current session
  • Click OK to exit the dialog box.

  Method 3: update the Firmware on the router

  Download and install the latest firmware for the router, in case the steps above fail to resolve the problem. If your router is Netgear, then you can follow the steps below.

  NET gear 3700 firmware update

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Access WiFi Limited, problem with Wifi adapter

  Original title: wifi access

  my laptop recently having limited wifi access issue. I tried troubleshooting, but it did not help. It comes up with a window saying there is a problem with my wireless card. I checked the wifi card in the Device Manager and it says that the equipment did not work properly. then I tried uninstalled and reinstalled, but the problem is not fixed. my card is atheros ar9485 qualcomm (im using os win 8). I searched online and some people having problems of this ar9485 as well. then I updated the NIF of the driver file, but the problem still exists. im going to be crazy now. could you please help me out of it? much appreciated!

  Hello

  What is the brand and model of the laptop?

  There could be a problem with the driver for the wireless network connection card.

  Kindly, follow these steps and check if that helps.
  Method 1:

  If you get an error 'problem with my wifi adapter', please uninstall and reinstall the wireless card driver. Check with your computer manufacturer or the manufacturer of your wireless (Atheros) adapter and make sure you have the latest driver available for the card.

  Follow these steps:
  First, download the latest driver for network card wireless from the manufacturer's Web site.
  a. to uninstall the card, then press X and Windows on the screen. Click on Device Manager.

  b. locate network card and expand the driver icon.

  c. right-click on the icon of the Atheros wireless driver and click Uninstall.

  Follow the instructions on the screen to uninstall the driver.

  d. open the folder that contains the installation file of the latest driver that you downloaded.

  e. double-click the Setup file and follow the instructions on the screen to install the NIC driver

  You can try some troubleshooting section:
  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows/fix-network-adapter-problems#1TC=Windows-8

  Method 2:
  You can also reset TCP/IP manually.

  Follow these steps:

  a. press the Windows key (enter the splash screen), type cmd on the right click of the screen prompt, select run as administrator.

  b. at the command prompt, copy and paste (or type) that follows the command, and then press ENTER:
  netsh int ip reset c:\resetlog.txt

  c. Note: If you do not specify a path of the directory for the log file, use the following command:
  netsh int ip reset resetlog.txt

  d. restart the laptop.

  Let us know if it helps. If you have any other questions, we will be happy to help you.

• 15 - ac170tu: Please give me drivers for laptop HP 15-AC170tu

  Hello

  product_name: 15-rac170tu

  Product number: P6L83PA

  Operating system: win7-64 bit

  I'm not able to find drivers for the top of the tower... pls direct me, where I can download all the

  required software.

  Hello:

  Your laptop does not have an amd graphics adapter, so uninstall this driver and restart.

  Product specifications state that your model has an Intel HD 5500 graphics adapter.

  Try the W7 x 64 graphics driver directly from Intel and see if it works.  You want the file 3rd on the list (auto install 64bits).

  https://Downloadcenter.Intel.com/download/25484/Intel-graphics-driver-for-Windows-7-8-1-10-15-40-

• Pavilion laptop TS 11: Wifi does not

  I got this noteboof from a friend and he had a partition called (D) RECOVERY of 22GB. I accidentally formatted and now my wifi does not work. I updated my drivers and tried many things but its still does not. What can I do?

  This is the latest driver for the wireless card W8.1 you need for this card.

  5.0.50.0 Rev.B (November 4, 2014)

  FTP://ftp.HP.com/pub/SoftPaq/sp69501-70000/sp69543.exe

  If it doesn't, unfortunately, I will not be able to help you with this issue.

  It is possible that if the ralink driver wasn't the first that you have installed, then you can have polluted the work.

  I suggest you do a right click on the ralink wireless adapter, select uninstall, select uninstall driver, restart and reinstal the driver that I posted.

• blue tooth problems "Code 43" HP Envy Touch Smart 17

  I have a HP Envy Serial [edited by Moderator] product EBA11VA #ABA. I can't connect to my phone via blue tooth. I tried to download the latest driver, and when I go into my control panel and check it out, it reads,

  Intel® wireless Bluetooth® 4.0 + HS adapter

  Windows has stopped this device because it has reported problems. (Code 43)

  Can someone help me please?

  Thanks in advance.

  Excessive salvation,

  Welcome to the HP Forums!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you have a problem with Bluetooth.  I suggest you The HP Support Assistant to ensure that all updates are done running. Here is a link to the driver for your system and software page. HP ENVY 17-j070ca Notebook PC drivers. You will need to select your OS that you did not give it and click Next.  Now click on the network. Download the driver appropriate for your system and install.  If the problem remains, open the device handle and right-click on the Bluetooth adapter. Uninstall, now scan the events for the hardware changes, this should install the latest driver for it.

• Teredo Tunneling Pseudo-Interface - This device cannot start. (Code 10)

  Original title: code10microsoft toledo tunnelling

  We think we've found a driver but we are not sure because he vomits again code.10

  Hello

  1. don't you make changes to your computer before this problem started?

  2. What is the brand and model number?

  If the device has a FailReasonString value in its hardware key, that string is displayed in the error message. The driver or enumerator places this registry string value there. If there is no FailReasonString in the hardware key, you receive the following error message: this device cannot start. (Code 10)

  You can try the following steps and check if that helps you solve the problem.

  Method 1:

  Open the Device Manager and the analysis of new hardware and select 'Show hidden devices' in the view menu and check if you find errors.

  a. Open command prompt with administrator credentials (type CMD and right - click Run as administrator).

  b. Type "netsh" and ENTER.

  c. Type "int teredo" and ENTER

  d. type 'set disabled state' and ENTER.

  e. open the Device Manager and uninstall "Teredo Tunneling pseudo-interface".

  f. Open command with administrator credentials prompt once more.

  g. type netsh + ENTER.

  h. Type "int ipv6" + ENTRY

  i. type 'set teredo client' + ENTRY

  j open the Device Manager and the analysis of new hardware.

  k. Select 'Show hidden devices' in the view menu. You will see now that she is present without errors.

  Method 2:

  If the steps above do not help, you can try to uninstall the drivers of the computer network and reinstall and check if that helps. Before uninstalling the network drivers, make sure that you download the latest drivers on the site of computer manufacturers. Follow the steps below to uninstall the network adapter.

  Follow the steps below to uninstall and reinstall the network card.

  a. click on start

  b. in the type of search box of start of "devmgmt.msc" and press enter

  (c) in Device Manager, expand network adapters

  d. right-click on the network adapter and uninstall.

  e. restart the computer, and then reinstall the network card.

  Note: When uninstalling device drivers make sure you put a check mark against 'delete the driver for this device '.

  I hope this helps.

• Acer 5742 screen turns off after starting

  Hi - looking for help from you guys please

  Got an acer 5742 running windows 7. All of a sudden the display has stopped working.

  It starts very well and the screen works to the point of "starting windows." I see the logo of windows for a bit, then it turns off.

  If I plug it into an external monitor, it works very well. In the chart properties, the screen is not yet listed (only external shows upwards). Help please!

  Hello...

  You can try to start your computer in safe mode by pressing the F8 key when you start your computer.

  If you can't login failure mode, connect the external display > from the Start menu, type Device Manager in the start search box and press enter.

  In the window Device Manager left click on the arrow next to "Graphics card", then right-click on the name of the display adapter and uninstall it. Watson computer to check if there is display after loading windows.

• Cannot cling to the network-WRT 54GS

  Every day I learn something. Today I learned that I don't know sh *. I have an old WRT54GS router (what a V1.2?) and a 54GS WUSB adapter. I'm back to the old system after having tried a Netgear N system added strength or speed signal. After a near collapse install antivirus stuff, my computer froze and I had to do a system restore. But then he could not connect to the network. After hours fiddling with IP addresses and others, I finally got online, during about three minutes then, he said that it was out of line - but it wasn't. The red X was over the icon in the toolbar, but the connection only remained connected or re-connected. Whatever it is, I had access for about 5 minutes more. When I got the message that there is a network in range, I knew I was gone. To restore the connection, I had to go back and put in the network key. Same scenario, 3 minutes with the icon that shows the connection, 5 minutes more connected but said I was not logged, then disconnect and the message that the networks were available. During this "in between of phase" of connected while being said I'm not, I can check on my network and get the message «you are currently connected to the network...» "while he proclaims not connected. When I hilight the network, it is for me the button to disconnect from the network. I'm confused and certainly my office is confused. This is an XP machine. My Vista laptop did all settings in good condition (not that I would NEVER say anything good about Vista) HELP!

  Well what you can do is you can just uninstall and reinstall the wireless adapter.

  Please follow these steps to uninstall and reinstall the wireless adapter.

  Click on the start ==> all programs ==> look for Linksys Wireless USB adapt and uninstall it.

  Now to install the wireless adapter, click here.

  Once the adapter we installed try to connect to the wireless network and able to go online...

• Wusb54g v2 - problem with Linksys Wireless Network Monitor Software

  I have a card Linksys USB wireless (WUSB54Gv2) that is currently used with an old HP Desktop running Windows XP Service Pack 3.

  I also have a Linksys Wireless PCI Adpater (WMP54Gv4.1) that is currently used with an old Dell desktop running Windows XP.

  I have a wired and wireless home network... My broadband provider is Verizon FIOS; I use their supplied router because the coaxial cable that provides the internet connection plugs only into their wireless router, not in a modem and a router. I have an encryption key for 128-bit WEP on the side of the network wireless; It is even once managed via the Verizon FIOS router via a web browser (like most routers).

  Two other computers I own are a desk custom-made to date with a direct link to the Verizon router and a laptop from Apple. These two computers are NOT having internet connectivity problems.

  I've updated to the latest drivers for my USB adapter and the car PCI.

  ---

  Here's my problem:

  When I try to connect to the internet using the Wireless Network Monitor software provided by Linksys, computers, I can connect to the "access point", but not internet. This product only when I don't have the key WEP 128 bits in place, when security is disabled.

  If I right click on the Wireless Network Monitor icon in the taskbar and select "Use Windows XP Wireless Configuration", enter my network through windows manually information (including the WEP key), I can connect to the internet perfectly.

  However, when I restart or stop two PC, the Linksys Wireless Network Monitor reactive software itself, where it automatically attempts to connect to the internet, but fails, after which I right click on the icon of the monitor again and select «Use Windows XP...» "and then I connect to the internet.

  Is anyway to disable the Linksys continuously monitor software WITHOUT uninstalling the software or drivers? (I tried this; Windows cannot use or recognize the network adapter).

  ---

  I might just re - activate the Setup Wireless Windows XP every time I close / restart, but other users of PCs on my network (my family) are exceptionally illiterate computer/network and would not be able to learn how to do whenever they want to connect. There is very little practice.

  If there is a way to solve this situation, please help! If all goes well there are other solutions I am open to suggestions.

  I must emphasize that our Apple laptop connects fine when the WEP key is set.

  Once more, looking for quick help!

  Thank you advance!

  Remove the Linksys adapter and uninstall the Linksys software menu programs... Re - install drivers insert the CD of Linksys install in your CD-ROM drive, when the welcome is displayed click on exit, connect your USB adapter now... When the Hardware Update Wizard window appears, click on install the software automatically (recommended) and then click Next... Click Finish when the installation is complete.

  NOTE: The hardware installation screen may appear indicating that the adapter has failed the Windows Logo test. Ignore the window and click on continue to continue the installation because the adapter has been tested and it works with Windows XP. When Windows has finished installing the driver, click Finish.

  Click Start and open the control panel and double-click on network connections. Right click on wireless network connection, and then select view available wireless networks "-If you see your network wireless in the list, the highlight by clicking 'single' on it now, click on the 'Connect' button below-if your wireless network is secured, it asks you to provide the network key - provide the wireless network key and confirm again in the confirmation box and click 'Connect'." It should work...

• can't renew ip address

  I have a linksys wireless-G usb adapt wusb54gc connected to my laptop using Windows XP. On every 2 weeks or so when I first try to connect to the internet my adapter says "cannot renew IP address. I can only restore my wireless connection by uninstalling the adapter software and reinstall from the CD. Then it works very well for another 2 weeks. I use a linksys wrt54gc router, which continues to operate correctly with the other 2 users wireless in the household. Linksys did not have a update driver I could use. I only got the adapter about 2 months. Can anyone help with this problem. Thank you

  Uninstall the adapter software/linksys monitor and only install the drivers...

  Remove the Linksys adapter and uninstall the Linksys software menu programs... Re - install drivers insert the CD of Linksys install in your CD-ROM drive, when the welcome is displayed click on exit, connect your USB adapter now... When the Hardware Update Wizard window appears, click on install the software automatically (recommended) and then click Next.

  NOTE: The hardware installation screen may appear indicating that the adapter has failed the Windows Logo test. Ignore the window and click on continue to continue the installation because the adapter has been tested and it works with Windows XP. When Windows has finished installing the driver, click Finish.

  Click Start and open the control panel and double-click on network connections. Right click on wireless network connection, and then select view available wireless networks "-If you see your network wireless in the list, the highlight by clicking 'single' on it now, click on the 'Connect' button below-if your wireless network is secured, it asks you to provide the network key - provide the wireless network key and confirm again in the confirmation box and click 'Connect'." It should work...

• Error message WLMON or WLMON.exe, the missing files and WPC54G

  Portable running Linksys Network adapter card WPC54G

  OS: XP

  Driver version: 4.100.27

  I get an error message that WLMON.exe has no inialize, and a second pop up that tells me that there are missing files. Can someone tell me if there is a fix to this addition WLMON out of my boot ini and the devil made WLMON.exe? Did he get the same problem and have a solution?

  Do not install the Linksys monitor... just install the driver.

  Remove the Linksys adapter and uninstall the Linksys software menu programs... Re - install drivers insert the CD of Linksys install in your CD-ROM drive, when the welcome is displayed click on exit, connect your USB adapter now... When the Hardware Update Wizard window appears, click on install the software automatically (recommended) and then click Next... Click Finish when the installation is complete.

  Click Start and open the control panel and double-click on network connections. Right click on wireless network connection, and then select view available wireless networks "-If you see your network wireless in the list, the highlight by clicking 'single' on it now, click on the 'Connect' button below-if your wireless network is secured, it asks you to provide the network key - provide the wireless network key and confirm again in the confirmation box and click 'Connect'." It should work...