Backup DVD of Windows 8

Similar Questions

• I can't backup DVD for Windows Vista operating system due to the error of 0x8007001B

  I can't finish a DVD upward on my Windows Vista operating system.  This is due to an 0x8007001B error code.  I was unable to complete the fix to services.msu

  Hi mine,

  This isn't a question of MSE - there is a problem with Vista or your computer or your software backup or your DVD player or its drivers or something else. We are not the right people to answer your question and give you the best possible options and solutions - you have to talk to the experts.

  Please repost at: http://answers.microsoft.com/en-us/windows/forum/windows_vista-system?page=1&tab=all&tm=1304884961900 where specialists who understand and focus to help with these issues will be more than happy to help you.

  Although not my area of expertise (and you're welcome to ignore it and just after to the other forum), I did do research in any case and believe that the problem involves the corruption on your hard drive (although I could certainly be wrong - it is more likely to be the case if the full error message includes "drive cannot find sector requested" but you don't get the full error message, so I don't know). To try to fix it, if that is the problem, follow these steps:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  While in the command prompt, type chkdsk /f /r and enter and let it run. They tried to set itself to run at the next reboot. Answer Yes and restart to run the program. It will scan and attempt to resolve any corruption or bad sectors on your hard drive and remove especially as a potential cause.

  If this does not work, test better clean your hard drive. To test your hard drive, check the manufacturer and try to diagnosis HD (http://www.carrona.org/hddiag.html) or this test: hard drive diagnostics tools and utilities (storage) - Corp of TACKtech (http://www.tacktech.com/display.cfm?ttid=287). If it passes the tests, there's probably nothing wrong with it and you must do to the other support forum. If it fails, which include in your post on the other forum and let them advise you how to proceed.

  I hope that the above solves the problem. If this isn't the case, I am confident, they can help you in the other forum, because that's what they specialize in. It would help if you posted the message Word for Word that is accurate and complete, including all codes. In addition, it would help them if you explain the difficulty you mention services involving (a link to the site where you found the solution or at least what exactly you did and what has happened or not happened when you tried). And if you've tried my suggestions above, include the results in your message (so they don't ask you to do it again and will be able to exclude).

  Good luck and best wishes!

• How to backup on DVD under Windows Vista?

  I have windows vista... Last year this time, I made a back up on 3 DVD... This week I'm redo it... I erased all the DVD... and made a return to the top... but it isn't on a single dvd... I missed something... and that was clear an error? Thank you for the answers

  Hi thanks for the info... I went back and started a full backup (dvd) disc 1 well... Disc 2. a HR in and almost done, I came back to comp and it says error code access denied... !! What is the devil. ?

  Thanks for all info

  I don't have a solution to your problem of file using DVD backup.

  I just want to make a suggestion...

  Abandon the DVD method. It's stone age, and several times he does not. I know, I have here.

  Please, invest in an external hard drive and backup with it.

  It will secure you all the aggravation of the use of DVDs.

  You won't have to sit by the computer, feeding beside with dvd, whenever he asked one.

  You can simply walk, watch TV, read a book, etc. and let the computer and the ext.hhd are doing their job.

  According to the country of whichn you are, an ext.hard of 1 TB drive can be had for less than $150 in the United States and the Canada.

• DVD of Windows 7

  Hello

  I recently ordered Y550 with windows 7 Home premium. However, I don't have the DVD of windows 7 with her nor I not any CD software how can I restore / reinstall my Windows genuine 7 in the case as needed without the DVD.

  Welcome to lenovo user forums pratik

  You need to do a recovery cd box set including windows 7 to do this turn to the backup key recovery, choose "create the full backup" and select "backup discs.

  Hope this helps you

• Filed on a backup DVD

  I have Windows XP.  How to make a manual backup on a DVD?  Because I don't have MS One Care, I can't figure out how to back up my files.

  The default that NTBackup backup on floppy disk, it can not save on dvd

  The backup to a location of hd, then upgrade again fire on a backup dvd, or use a dedicated backup application which most can save at various locations.

• problem importing from dvd in windows movie maker

  made a dvd with windows movie maker home but now I want to change it, it is possible to re - import into windows movie maker on the dvd that I did?

  made a dvd with windows movie maker home but now I want to change it, it is possible to re - import into windows movie maker on the dvd that I did?

  =====================================
  DVD files you need for editing are the
  . VOB files. Copy them to a folder on your hard drive
  drive. You can find them on the DVD in the VIDEO_TS
  folder.

  First... just try to rename one of the. VOB files to
  . MPG and see if it will matter in Movie Maker.
  If import works... drag the file to the timeline and
  Economy/publication it to .wmv or .avi format. Then...
  Re - import new video film for editing purposes.

  If this does not work... rename the file back to VOB and try
  convert the .wmv or .avi file using the following
  free Converter:

  SUPER © Simplified
  Universal Player Encoder & Renderer
  http://www.videohelp.com/tools/Super
  (the download mirror site is faster)

  (FWIW... it is always a good practice to create one)
  System restore point before installing new software)

  After installing the program GREAT... open...
  you will see two small circles at the top left
  corner of the screen... check the UPPER circle.

  Now... Drag/Drop your. VOB files in the current field.

  Output container... Choose wmv...

  Video scale size / no change

  Left, click the Encode button.

  Choice: A Simple Profile / OK...

  Wait...

  (FWIW... I have better luck with video if I'm not
  try to multi-task while a file is being converted)

  When the file is converted, you should find it in...
  Program Files / eRightSoft / Super / exit.

  Or... you can type... CTRL + T.. o open the Save
  Window and choose a backup folder.

  Good luck... John Inzer - MS - MVP - digital media experience

• backup failing 0x800700AA windows vista

  can not help please perfom file backup (backup unresponsive windows vista 0x800700AA)

  Hello

  make backups on an external hard drive or DVD

  see if this information helps you

  How to make a backup of your data

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  the 1st link below is how do the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  If you have problems, it's in here is a forum for microsoft specifically for backup issues

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• How to create a recovery with the Image of the DVD of Windows 7 Partition?

  My laptop got screwed that I started a month on vacation and no DVD of Windows 7 with me. I think that the best solution would be a partition with a bootable Windows 7 DVD image.

  Any suggestions on how to make a? -Nigel M

  Make a Windows 7 image and store it on a separate partition

  1. create a partition large enough to store an image of your Windows 7 installation
  2 make a Windows 7 image and save the image on this partition
  3. with the program allowing you to make the image to burn it to a bootable recovery CD Imaging
  4. If you need to restore the image, insert the CD to boot and start the restore process.

  Create a System Image in Windows 7

  After you install and activate Windows 7 create a system image as a backup of your current computer in case you need to reinstall it. That will save you the trouble of having to reinstall Windows 7 and installed everything currently again, and it takes much less time to do.

  1. click on the Start Menu and type "Save", and then click Backup of your files.
  2. in the Control Panel window that appears, click the blue link to the image.
  3 create a system image window should pop up.  Select which hard disk, DVD, or network location, you'll save your image.  Click next to continue.
  4. on the next page, check disks in your system and your system for.  Once you have selected the drives, click next to continue. Note: You can select as many records as you want (if available), but you choose to include means to the greater will be the size of the image.
  5. the next window is just a review, make sure everything is correct, and then click Start backup to start the process.  It may take 10 minutes or more, so patience is needed.
  6. once the backup is complete, you? He's prompted with the option to create a system repair disc.  It's a good idea, just in case your system has problems in the future.  Click Yes.
  7 choose which disc recording drive you? He's use to burn the disc.  Insert a CD or a blank DVD for the physical disk, and then click on create disc.

  How to restore Windows 7 from a System Image
  http://www.howtogeek.com/HOWTO/7702/restoring-Windows-7-from-an-image-backup

  You can also use a disk imaging hard program - they both allow you to create a rescue disk.

  Reflect disk imaging:
  http://www.Macrium.com/reflectfree.asp

  Paragon Backup & Recovery Free Edition:
  http://www.Paragon-Software.com/home/DB-Express/download.html

  Windows 7: create a Partition of Installation of system to install Windows (I nstallation Partition, not an image)
   
  (1) create a partiton of 3.5 GB at the beginning of the hard drive, then the rest of the hard disk you want to partition.
   
  (2) copy the whole DVD on this 3.5 GB partition and make the partition bootable.
   
  Open the command prompt and run the following:
   
  x:
   
  CD/Boot
   
  x:\boot\bootsect/nt60 x:
   
  (where x is your score)
   
  A message "startup code has been updated on all targeted volumes" should appear.
  Then, verify that the partition is marked "active" in disk management.
  If necessary, right-click on the partition and 'mark the partition as active.
   
  (3) upon reboot of the PC will automatically launch the partition setup and add an entry 'Windows setup' in the BCD entries. If this is not the case, change the boot with EasyBCD menu. http://NeoSmart.NET/DL.php?id=1

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• M30X MultiDrive won't burn a DVD from Windows Movie Maker

  Hello

  My MultiDrive M30x will not burn the DVD from Windows Movie Maker and other applications.

  I also had problems with burning CDs (unbranded) of Windows XP, built in utility.

  The multidrive has problems with cheaper brand discs?

  Just to note,
  The laptop was to support guys three times until various issues.
  (1) the hard drive failed.
  (2) the multidrive has failed.
  (3) the motherboard replaced, due to power outages, it would not charge the battery, or recognize that the AC adapter is plugged.

  Note: The hard drive, not the fan made the most noise in mine!

  Thank you

  Hello

  As far as I know (i.e. pre-installed burning software Save now, drag-and - drop) disabled the option of Windows XP burning. In this case if you want to use the Movie Maker or Windows media player burning option, you need to activate this possibility.
  Please, go to the properties of the drivers (right click). Please select the recording tab. CD recording option on this drive must be marked.
  I use the software Nero burning and in my opinion he of one of the best burning programs. In addition, you should try different manufacturers CD/DVD because some CD and DVD is not compatible with some readers. Check the TDK CD and DVD. I never had no problem with these media.

  Best regards

• New Recovery DVD - Rom Windows XP MCE

  Anyone know how to get a new dvd - rom windows xp mce recovery? And how much it will cost?
  Because I'm living in the Brazil, and I bought the laptop in the United Kingdom.
  Thank´s.

  Hello

  The recovery CD can be ordered from each Toshiba authorized service provider.
  Authorized service provider fixed prices of recovery CD and each country has different prices, but generally it should not be expensive.

  I recommend contact point of the ASP to the Brazil and ask about this CD.

  The database with ASP in the world, you'll find the European Toshiba support page:
  _eu http://eu.Computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=eu&ID=Support_Homepage

  Good luck

• Copy of DVD of Windows 7

  Hello

  I recently bought a new computer with WIN 7 64 bit. AND I got in trouble a few days updating my Windows because it lacks a BIT files service. When I bought my computer I have not received the installation DVD of Windows because it was preinstalled. But I still have a copy of the Windows DVD.

  How to get one with my windows license number?

  Thank you in advance.

  Carine

  Hello

  > I have not received the installation DVD of Windows because it was preinstalled. But I still have a copy of the Windows DVD

  Are - you're talking about a recovery disk that you created or the original copy of Windows 7 disk?

• Re: A500-1GL - create a CD/DVD of Windows 7

  Anyone know how to create a CD/DVD of Windows 7 from a source that is preinstalled on the HARD drive?

  Hello

  A recovery of the software on your computer image is stored on the hard drive
  disk drive and can be copied on a DVD by using the following steps:

  1. Select the two blank DVD media.

  2. the application will allow you to choose from a variety of different media on which the recovery image can be copied, including DVD-R, DVD-R DL, DVD - RW, DVD + R, DVD + R DL and DVD + RW.

  3. turn on your computer and let it load Windows 7 operating system from the hard disk as usual.

  4. Insert the first blank media into the optical disc drive tray.

  5 double-click on the Recovery Disc Creator on the Windows7 desktop icon, or select the application from the Start Menu.

  6. After Recovery Disc Creator starts, select the type of media and the title you want to copy, and then click Create. If your optical disc drive can only write to CDs, select "CD" as the 'Disc Set' in the Recovery Disc Creator application. Otherwise, if your optical disc drive can write CD and DVD, select the media type you want to create.

  ? Make sure to plug the power adapter when create you recovery discs.
  ? Be sure to close all other software programs except the recovery disk creator.
  ? Do not software such as screensavers that can put a heavy load on the processor.
  ? Use the computer to full power.
  ? Do not use the energy saving features.
  ? Do not write on the disc when antivirus software is running. Wait for it to finish, then turn off including any virus detection programs software that checks the files automatically in the background.
  ? Do not use public services, including those to improve hard disk access speed. They might given unstable operation and damage.
  ? Not shut down/logoff or sleep/wake extended while writing or rewriting drive.
  ? Configure the computer on a flat surface and avoid locations subject to vibrations such as planes, trains or cars.
  ? Do not use on tables unstable or other any other unstable surface. Please note that certain media above may not be compatible with the
  optical drive installed in your computer. So you must check that the optical disc drive supports blank media you have chosen before you continue.

  I copied the user manual

  Welcome them

• How to make a backup of my Windows Vista?

  Hello.

  Windows Vista has been installed on my Toshiba laptop when I bought it.

  How to make a backup of my Windows Vista and I need to?

  Can I do a backup on a CD, or how?

  I think I have to need if I get a virus and you need to remove and install from the beginning.

  Thanks by

  Hello

  I think that it s a good idea to make a backup on your laptop.

  You have created the Toshiba recovery disks? When you bought a Toshiba laptop, you must create these disks. If you have a virus or something else with these discs, you can get the factory settings on your laptop.

  You can create discs with the Toshiba recovery disc creator and if you didn t again, you get the following message:

  > Important INFORMATION
  >
  > your system is equipped with a hard drive recovery system. If you need to repair
  > your computer in the restaurant to original factory State, you can do it directly
  > drive hard (press F8 when you start your computer, choose "Repair your computer"
  (> and follow the instructions in the menu) or create a media drive bootable recovery for this purpose.
  >
  > Toshiba recommends you create recovery disk medium uses the "Toshiba Recovery Disc Creator' to ensure the
  > Hat you are able to restore your computer to the State of origin, installed at the factory, even if your computer
  > is seriously damaged

  So create one and if you need, you can get factory settings with Windows, drivers and tools in minutes.

  If you want to make a backup of your laptop with all the software that was installed by you, you must use programs such as Acronis True Image backup.

  Bye!

• When I try to play a DVD through Windows Live Photo Gallery, I get an Ox80010108 error code

  Original title: compatibility programs Application Applications App Apps game games Legacy Crash crashes Hang hangs

  When I try to play a dvd through Windows live photo gallery, I get an Ox80010108 error code. What does that mean.

  Hi DonWright,
   
  Follow the steps as shown in the link given below and check if it helps to fix the problem:
   
  Code 0x8007007e error and 0 x 80010108 when double clicking on a photo for editing in photogal
   
  If this does not help, post your request in the Photo Gallery Forums for assistance on this issue.

• Can I make a backup of the windows updates?

  Can I make a backup of the windows installed updates? If so, how can I do it? I don't want to search for updates (one) if I have to install my OS (Vista Ultimate 64-bit) again!
  Thanks in advance!

  You can not make a backup of the installed updates.

  "I don't want to search for updates (one).

  Only way to do, is to download and register them with microsoft direct downloads Mick Murphy