How to make a recovery disk for hp 13 stream backup DVDs

Similar Questions

• How to make a recovery disk?

  I want to do system recovery on my laptop again, I lost I have original windows vista Ultimate edition

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• How to make a recovery CD for Windows Vista Home Basic?

  A friend recently gave me a laptop Acer 5315 to play with (I like to play with the old pc...). It came with Win/Vista Basic Home Edition. I got to level with SP2 and 2, kicking the 2gig memory (this is the limit) and now I want to create a backup/recovery disk. It has a CD inside player, but is limited to CD (not DVD). I've been looking around, but apparently creating a Vista recovery disc without the original install disks is not easy. It's true.

  Anyone have any ideas?

  Hello

  Strange that it is limited to the CDs, Vista came on a DVD, unless you have specifically ordered CD from Microsoft if you had a license to retail not OEM...

  Use an external hard drive.

  If you want to make a complete PC Backup or a backup file only, buy an external hard drive.

  Only Vista professional, comprehensive and company have the opportunity to make complete backups of PC.

  All editions of Vista can do backups of files.

  Here's how to back up and restore your files:

  "How to back up your data.

  http://www.wintuts.com/how-to-backup-your-data

  http://www.home-PC-help.com/windowsvistabackup.html

  "How to restore your files.

  http://www.wintuts.com/how-to-restore-files

  This is how to do a full backup of the computer and how to restore it (for Vista Business, Ultimate and Enterprise only):

  «How to make a backup of the computer in Vista»

  http://www.bleepingcomputer.com/tutorials/how-to-use-Vista-complete-PC-Backup/

  "How to restore a full backup of the computer.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-complete-PC-Restore/

  FAQ from Microsoft about backup and restore:

  "Back up and restore: frequently asked questions.

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  There are a number of 3rd party programs available for a full backup of the computer; others, you must pay for, some are free.

  This program must be purchased:

  "Acronis True Image".

  http://www.Acronis.com/homecomputing/products/TrueImage/index_gwo.html?utm_expid=4274314-6

  These are free programs for the protection of the computer:

  "EaseUS Todo Backup free"

  http://www.TODO-backup.com/products/home/free-backup-software.htm

  "AOMEI Backupper Standard for Win7.

  http://www.backup-utility.com/aomei-backupper-for-Windows7.html

  "Download Backup & Recovery 2012 free FREE!

  http://www.Paragon-Software.com/home/BR-free/download.html

  «Macrium Reflect FREE Edition»

  http://www.Macrium.com/reflectfree.aspx

  See you soon.

• How to make a recovery disk or possibly to do a windows repair disk?

  Compaq presario CQ60 notebook pc. Processor AMD Athlon dual-core QL-62. Microsoft windows vista version/version 6.0 service pack 2. 32 bit

  Hello:

  You can make recovery DVD by going to the menu all programs and find the HP Recovery Manager program where there should be a line to make recovery disks. Carefully follow the instructions that you only get one chance to make them.

  You can do a repair or reinstallation of Vista disk by reading the info below. You can only use the disc to reinstall Vista if you can read the product key microsoft complete 25 characters on the label stuck on the bottom of your laptop.

  If you are in a fault light but rewarding you can do yourself if you can read your product key of Vista on the PC of 25 characters.

  If you can read your 25-character product key MS, you can make your own Windows Vista installation disc. You just download the 3 files you need on the link below and read all the instructions to create a Setup bootable DVD disk using imageburn.

  Do not take into account the part of the text in the first screen shot about "extract the files in the folder of Vista."

  The files were extracted already in this folder when you ran the X14.exe file by reading the text on top of the first screenshot.

  The other thing I noticed is on the 4th page, where it shows Developer ID Microsoft Corporation. I had to type Microsoft Corporation in me, and then other codes already filled in.

  When I went to compile the ISO file, ImageBurn gave a message on a WIM file, file and ISO, and if I wanted to burn it in a different format.

  I selected no, make the ISO file.

  It was not so hard to do. I burned both the disk of 64-bit and 32-bit disk in case I ever need them.

  I tested both of them one my hp dc7100 CMT desktop PC, worked flawlessly.

  When you enter the product key, he knows which version of Vista you have.

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/3317.2-3-Microsoft-Windows-v...

  After you install Vista successfully, you can then install the drivers for your PC and driver page support.

  Paul

• How to make a recovery disk partition?

  I have an acer aspire one notebook. He had a recovery partition where I could reinstall windows by pressing Alt + F10 during post (D2D recovery). This partition has been deleted by formatted the disc on a windows installation 8.

  Now, I want to make a partition on the disk with windows 8 image data so that I could just open it by pressing Alt + F10 during post and reinstall windows, like the manufacter. Could someone tell me how to do this?

  Hello...

• How to use data recovery in memory of "D"? The computer did not contain a wrioter of C/D, so I couldn't make a recovery disk.

  How to use data recovery in memory of 'd' (about 10 GB)?

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Ask your manufacturer of computers for the EXACT method to restore to factory settings.

  This isn't their recovery process, Microsoft.

  See you soon. Mick Murphy - Microsoft partner

• How to get system recovery disks

  original title: need to erase my hard drive to get rid of a virus, but the laptop did not come with disks in the system, because they were already installed on the laptop. What should I do?

  I bought a laptop computer three years ago and I had very little trouble with it. But recently, it has become very slow, even though I have plenty of hard drive on the left. When it's built in wifi suddenly stopped one day, that I took it to the geek squad in PC World, who told the driver he had been uninstalled and who, after having worked on my laptop and see how slow and it was slow, it was probably the result of a virus.

  I was told my only option to remove potential viruses was to back up my files and wipe my hard drive for all files. I was quoted £60 for this service so I went home and saved the files I wanted to keep on my laptop hard drive. I wiped my old PC hard drive before you delete the virus and I could then reinstall Windows and the built in programs using records systems. However, I bought this new laptop and all programs have been preinstalled and came with no system disk.

  What is the best way to go on my hard disk wiping programs and files without Windows, or should I just pay PC World to do properly?

  Thanks for the help :))

  When you clean your hard drive, it is wiped away.

  You must reinstall Windows during this process.

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• How to get the recovery disks?

  I have install disks for this program and I have no idea where to get them

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!

  never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• I need English recovery disk for M300

  Hi all
  I need recovery disk for my portege m300
  I have just in Italian, all that we can do the disk image in the menu
  or tell me how to get a copy?

  Thank you

  Hello

  on the official means, it is not possible to get a recovery disk in another language. Only, you can try to find someone who has a version in English of the M300.

  You can also create the system by yourself with a Microsoft Windows CD English. Programs and the necessary drivers can be downloaded from the Toshiba site.

  Good bye

• Re: Satellite L355D - how to create a recovery disk?

  I searched all over the forums, but does not know how to create a recovery disk works for my laptop. I know it is run from a partition on the HARD drive, but I can't figure out how to access this partition. Should there be some sort of built-in utility?

  Thank you

  You can create the recovery only DVD disc if your laptop computer has preinstalled Toshiba recovery disc creator and factory settings.

  Please check if you can find this tool under start > all programs > Toshiba. There you should find shortcuts to launch this utility.

• Need recovery DISK for Windows VISTA

  Hello

  I don't have my recovery disk for my laptop but now I need it. Know kindly if any, let me know how to get it and how much it costs.

  Thanks in advance!

  I think that this value is Euros.
  Do you need the delivery to the India?
  I think it's possible, they should provide the media in most of the countries all over the world

• can I still make a recovery disk

  I never did a recovery disk for my computer when I got it.

  I have a copy of Windows Vista Edition family Basic.

  It has been preloaded on thecomputer when I bought the Best Buys.

  I can still do a disk recovery, and if so, how, please?

  Thank you

  D

  Hello

  You have provided all the necessary information and Bill was able to advise further away from her.

  To ease your confusion about the 'Beach '...

  The manufacturer is Acer. The range is Aspire (they also Travelmate, Extensa, etc.). The model number is AST180-EA381B.

  Tricky

• Recovery disk, for 7, 3 product key. What happens if I want to install win 8.1 pro on the same machine?

  I bought a lenovo desktop, which came with win 7 pro preinstalled via downgrade rights in win pro 8.1.

  now my questions are:

  1. How to make a recovery to win 7 pro disc, that I can use if you need arises to reinstall win 7 pro. ?
  2. Since then, the win 7 pro is preinstalled, so how do I access the product key?
  3. What if I want to install win 8.1 pro on the same machine - product one key method to do?

  Former title: windows

  The instructions in the same article shows you how to restore the image if you need to do:

  http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/

  One of the things that I recommend you do so after creating the system image is to change the name of the computer to something else, so if you decide to create another backup system image, it's not too write the original. You can use this even as a method for having multiple images of different systems.

  Change your computer name - Windows help

• How to create the recovery disk from image on another laptop?

  Hi guys,.

  I have a laptop where the recovery partition was reformatted somehow.
  Although I used partition recovery software to recover the original partition, the original system partition containing the Creator program of recovery was also missing.

  I was wondering if just, is it possible to create a recovery disc install creator on another computer Toshiba Recovery disk, extract the image from recovery partition and then create image recovery disc?

  See you soon

  Hello

  Unfortunately, I have to disappoint you. It is not possible.

  I had the same situation after partitioning my hard disk, he disappeared and did not make a recovery disk.
  You can order the new silver recovery disk:
  https://backupmedia.Toshiba.EU/landing.aspx

  or get a copy of Windows and install it. Then, download all the required drivers and enjoy.