Access between Máquina y virtual pc host

Similar Questions

• Access to Oracle Press VirtualBox virtual host

  Hello

  I have a windows host system 8, install the Virtual Box last edition.

  The guest operating system is Linux oracle that came with the selection of pre-designed developer programs Oracle's VM.

  The virtual machine is set to HOST ONLY the network settings.

  Now, the thing is I want to access the Oracle in the guest from my windows host computer.

  the guest operating system indicates the IP 192.168.56.101. I can ping the IP address of the HOST machine, but cannot connect to the

  Developer SQL to oracle in the guest to the host OS. He goes on to say that impossible to connect the network card.

  Please I need help, now please do not say that to install the oracle in the window itself. In fact, I want to do the same on my macbook pro since it is my main machine.

  Hello guys,.

  Thanks for the responses you provided really appreciate it.

  I made this connection and access between the host and the guest, and to access the oracle on the guest database.

  System information:

  • MacBook Pro - OS X 10.8.4
  • RAM 4 GB [go to 8 GB]
  • Package VM: Oracle Virtual Box
  • Guest VM: Oracle VM [ http://goo.gl/dtbzO ] developer pre-designed program selection
  • Network connection: host only

  Steps to connect the host to host

  1. If you see the "ifconfig", you will see a network card named 'vboxnet0' [created after the installation of VB]
  2. Check the address allocated to the virtual machine [MAC]-> preferences-> network: copy the beginning or between address, which in my case has been 192.168.56.101 [start a]
  3. Assign the address to the vboxnet0 adepter by terminal: sudo ifconfig vboxnet0 alias 192.168.56.101 to the top
  4. Change the virtual machine network affecting "Host," only
  5. Select the vboxnet0 virtual adapter in the adapter list, apply the configurations, click ok
  6. Start the guest operating system and login
  7. Check the IP configuration it by ifconfig, you will find the map eth0 with the same IP address that you assigned to the vboxnet0 on the host machine.
  8. Sql Developer on the host machine fire
  9. Make a new connection and "Hostname" as even as the vboxnet0 IE. 192.168.56.101, fill in the other details of the connection details Oracle needed comments
  10. Test the connection
  11. Woollaaaa you are finished

• Is it posible to allow access between the host and virtal machine without wired network?

  I want to use my laptop to show him that I did in the virtual work to other people at my home.

  However, the laptop is ofen not allowed access to the network in their office.

  Is it posible to allow access between the host and virtal machine without wired network?

  VMware player

  My virtual machine is filled to the physical network adapter and use the static IP address.

  Brad

  Setting of the virtual machine: filled

  Change that to each host only (what Continuum called VMnet1) or NAT (VMnet8).  Both use a separate virtual NETWORK card to connect the physical computer virtual host, independent of any NETWORK adapter on the host.

  ... Since the machine host (win7) could not get IP, ping fail to VM (192.168.1.5)...

  Because the connection between the guest and the host is through a separate NETWORK card, you must use the 'other' IP address.  Access a prompt on the host computer and type IPCONFIG to view the IP address of VMnet1 and VMnet8 NIC.  Then use this IP address instead of 192.168.1.5.

  And when you have changed the network management modes (i.e. of bridged to host-only), Windows does not automatically renew its IP address.  The virtual NETWORK card uses a different subnet if you need to renew your DHCP lease or change your static IP address to work with the new subnet.

• How access host files to virtual machine, host is Windows Vista and Red Hat Linux virtual machine?

  Please can you let me know them below, thanks, really appreciate your help on this.

  How access host files to virtual machine, host is Windows Vista and Red Hat Linux virtual machine?

  Thank you and best regards,

  Sam

  The RPM of samba must exist in the CD of RHEL itself. in any case, you can use winSCP tool to your windows host.

• To access the OS browser app reviews web host

  Hello

  I created my vmware Player (X) application using a vmdk disk file.

  There was a single web application deployed in the comments that is accessible in the browser firefox comments. ( http://< localhost/hostname >: 8080)- Tomcat

  My question is - is it possible to access the same web application from my host machine browser by typing the URL. Unfortunately at this time I couldn't able to access.

  For ex: http://< GuestVMIP/hostname >: 8080 (Tomcat)

  Settings of the player hostname & VMware

  (1) add the host ip address and hostname in/etc/hosts

  (2) card WLAN - NAT: used to share the IP address of the host

  System	OPERATING SYSTEM	IPAddress	Host name	Internet
  Host	Windows 10	192.168.x.x	PHY:/var/Xen/domains/testwin/disk.img,had,w	work
  Comments	CentOS 6.5	127.0.0.1	testcent	work

  (3) vmware Ifconfig is included in the image.

  

  Any help on this will be highly appreciated.

  Thank you

  Billon

  Hi Wila,

  Thanks for your reply.

  I solved this problem. to be precise, the question is how to establish communication between the host operating system and the guest operating system.

  I never thought that this was much simpler. Broke my head with lots of DHCP/static IP configurations.

  Running order with access root and its given an ip liaison to the guest operating system (CentOS) output. That intellectual property allowing access to the web applications of comments through the host browser.

  dhcpcl - v

• Cannot start Windows virtual pc host (I have all the updates)

  -Cannot start windows virtual pc host - cannot start windows virtual pc host process and earlier version of microsoft virtual pc is installed on this computer.

  I have all the updates for Virtual xp downloaded from the microsoft page.  Virtualization tool runs on my system.

  What is the best?  Should I bother trying to get virtual xp installed?  Or can I just use VM ware or something similar to run a virtual system?

  Any suggestions?

  Thank you.

  SYSTEM SPECS: icor7 3.2 Ghz, 24GBz Ram, Nvidia Geforce GTX 480, Windows 7 Pro 64 bit.

  process host and earlier version of microsoft virtual pc is installed on this computer.

  You happen to have Virtual PC 2007 is installed? If so, you need to uninstall that. Click Start, type: programs and features

  Press enter on your keyboard

  See the list of program and make sure that Virtual PC 2007 is uninstalled.

  If your intention is to use Windows XP Mode, make sure that the following two files are installed:

  You must install both files:
  1 Windows6. 1 - KB958559 - x 64 or x 86 architecture that you run
  Restart the system, and then install:
  2 WindowsXPMode_en-we

  Both Windows XP Mode and Windows Virtual PC can be downloaded from http://www.windows.com/business/downloads.
  For more information about system requirements, please visit http://www.microsoft.com/virtual-pc

  Mobile: http://www.notebooks.com/2009/11/23/using-windows-virtual-pc-with-windows-xp-mode/

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Cannot start Windows Virtual PC host process. Check the log of the events system for more details

  Hello

  I am running Win 7 Home Premium 64 and seek to install Windows XP Mode Virtual PC.

  I followed the instructions at: http://www.microsoft.com/windows/virtual-pc/download.aspx and receive the following:

  "Windows Virtual PC. Cannot start Windows Virtual PC host process. Check the log of the events system for more details".

  He does not point me to the "system event log", but he leaves me here. Any advice?

  Thank you

  Hello

  Ideally, this error message indicates that your processor does not support the against hepatitis a (hardware support for virtualization)function.

  Cause:

  Windows Virtual PC and Windows XP Mode are supported only on computers whose CPUs are the HAV feature is enabled. Therefore, if your processor does not support the functionality of HAV or if this feature is disabled, you cannot start the virtual machines in Windows Virtual PC.

  To resolve this problem, follow the steps mentioned in the link below

  Error message about Virtualization-aided material for Windows XP Mode in Windows Virtual PC on a computer that is running Windows 7

  http://support.Microsoft.com/kb/977206

• Mode XP error: cannot start Virtual PC Host Process...

  I installed XP Mode, download carefully the x 64 version. But when I try to start it, I get, "Cannot start Windows Virtual PC Host Process".

  Hi SibTiger,

  This happens if your PC does not support hardware virtualization based.

  How to confirm your PC can run Windows XP Mode
  http://www.Microsoft.com/Windows/Virtual-PC/support/configure-BIOS.aspx Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• Cannot copy file to virtual machine host computer

  People,

  Hello. I use VM Player 3. My host computer is Windows 7 and VM is Oracle Linux 5. I used to copy files from the virtual machine host successfully machine. But now, when I copy a virtual machine host machine zip file, the error message appears:

  "Unable to write file in Virtual Machine.Aborting the copy file operation."

  The virtual machine's memory is 2 GB, and the file is about 900 MB. I think that there is enough memory to hold the file.

  My question is:

  Any folk can help solve the question above?

  Thanks in advance.

  Hello

  To be able to copy this file in your virtual machine, you need about 2 GB of free space on the disk in the virtual machine on the disk that has the temp folder.

  The size of the RAM to the virtual machine is not really important.

  --

  Wil

• Cannot run Virtual ESX host configured in my Asus u56e laptop machine. Says Intel Vtx unsupported...

  Friends,

  I can't run Virtual ESX host configured in my Asus u56e laptop machine. Explains Intel Vtx unsupported.

  I checked to find that my machine has Intel VT turned on in the Bios.

  Please notify. I tried to use VMware-guest64check - 5.5.0 - 18463 tool and it said that my machine can support 64 bit OS. Fixing of newspapers.

  In my computer, open your VM ESXi and go to VM-> settings.  Under processors, check the box next to 'Virtualiser Intel VT-x/EPT or AMD-V/IVR.'

• Commands to start and stop a virtual machine hosted by VMware player

  Where can I find the commands to start and stop a virtual machine hosted by VMware player on a host Windows Server 2008 R2 (64-bit)?

  I need to start and stop the virtual computer from a script as I could do this by selecting the ' power on ' and his 'guest stop' or at least 'power off' options of the GUI of VMware player.

  If a control interface is not available, is available if I update to VMware Workstation?

  Concerning

  Marius

  With the player, the VIX API is a separate download (on the same page you downloaded the install drive in), so I guess you will have to install the separate package to use it.  But it's pretty easy to do...

• Virtualized ESXi host is not assigned an IP address

  My virtualized ESXi host is not assigned an IP address on a DHCP network. I created it on my physical host with a physical NIC.

  Both its E1000 vNIC is networked with virtually the same Vswitch as the physical host, I created a second Service Console on this vswitch for the ESXi host virtualized, what I need to change the IP of virtual servers to match the newly created Service Console?

  I found a guide on changing the IP address of the vswif on the virtual host, I'm going in the right direction?

  If you run ESXi on ESX (i) then you must enable the mode promicuous on the VM host vSwitch portgroup.

  Dave

  VMware communities user moderator

  Now available - vSphere Quick Start Guide

  You have a system or a PCI with VMDirectPath?  Submit your specifications to Officieux VMDirectPath HCL.

• PIX and problem of virtual FTP hosts

  I have a Cisco PIX (version 6.3 (3)) behind which I have all my ISP customers. I have a web server outside the PIX hosting various web sites on an IP (virtual hosts). People outside the PIX can send via FTP on the web server without any problems. People inside the PIX cannot. We have this problem until I started using virtual servers on the server FTP and assignment of different FTP port numbers for each of the web sites. (We only had a single site on the web server until a few days ago.) I guess it's a problem of PIX because that's the only difference between access to the FTP server for my customers of the ISP with non. So, my question is that I have to open also the new FTP on my PIX port numbers? I already have "fixup protocol ftp 21". I should add similar statements for each of the new higher ports? I'm new to using a PIX; We didn't cover them in my CCNA and CCNP courses. Also, I can FTP virtual hosts located on other servers of Internet service providers, which makes no sense to me. Thank you.

  Hello

  I assume by "higher port numbers" are the new ftp servers listening on ports other than the default port 21. If this is the case, then you are quite correct to say you need to add the correction commands more.

  The active way FTP works is that a control connection is established between the client and the server over tcp 21, and then they negotiate a data port. The * server * then initiates a connection to the customer on this port.

  Normally, this isn't a problem for the pix, because he looked at the control connection on port 21 and understood that it was necessary to open a hole for the connection on the new port, but if you do ftp on ports other than 21, you must specify the pix 'look' that port as a ftp control connection so it can then open the firewall for the data connection.

  You can verify the fix here

  http://www.Cisco.com/en/us/products/sw/secursw/ps2120/products_command_reference_chapter09186a00801727a8.html#wp1067379

  The short but you need an outgoing access list for the new ftp port entry (say it's 2525), then to consult as if it were the ftp, the command "fixup protocol ftp 2525"

  -Jason

  Be sure to note if it helps.

• Share resources between the 2 ESX 4.0 hosts without shared storage

  Hello guys,.

  I have the following question, I want to clarify.

  Imagine that we have 2 host ESX 4.0 with more functional license acquired (HA, VMotion, DRS, etc.)

  The two physical servers are identical. Don t have access to any kind of shared storage (San, no iSCSI, NAS no, etc.)

  In host #1 I installed all the virtual machines using local storage.

  Is it posible to use the host #2 resources (memory and CPU) to give more power to accommodate #1.

  My doubt is if it is posible to have a VM installed in local HD in home #1 and using RAM or / and CPU host # 2.

  Just do a cluster between the two hosts to empower the host #1 resources (not use DRS or functions of Vmotion)

  Let me know if I explained in a good way or not.

  Hope someone can clarify this for me.

  Thanks in advance

  It is not possible, even if you have the shared storage.

  There is no possibility that allows you access to CPU and memory of 2 resources different hosts.

  See you soon,.

  ~ Jean

  ~ Don't forget to points, if you found the useful answer

• Script to get 1 csv by cluster with associated information (list of virtual machines, host capacity, IOPS / s...)

  Hi all, I'm new here and it's been days I'm trying to find the right script to the list of virtual machines and related information on each cluster and get 1 csv for each individual cluster.

  Here is my code:

  Get-content C:\cl.txt | % {

  $cl = $_

  Get - VM | Select-Object @{N = 'Cluster'; {E = {Get-Cluster - VM $_}}, @{Expression = 'Host'; Label = "ESX host"}, @{Expression = "Name"; Label is "VM"},

  @{Expression = "Numcpu"; Label = 'vCPU'}, @{Expression = "MemoryGB"; Label = "RAM (GB)"}, "

  @{n = "Provisioned Volume"; e = {[math]: tour ($_.)}} (ProvisionedSpaceGB, 2)}}, @{n = "Use the Volume"; e = {[math]: tour ($_.)}} (UsedSpaceGB, 2)}},

  @{N = "Ops ARE/s/write"; E = {[math]: tour ((Get-Stat $_-stat "datastore.numberWriteAveraged.average"-en temps réel |))} Select - expand the value | measure - average). Average, 1)}},

  @{N = "Ops ARE/s/reading"; E = {[math]: tour ((Get-Stat $_-stat "datastore.numberReadAveraged.average"-en temps réel |))} Select - expand the value | measure - average). Average, 1)}} | Export-Csv - NoTypeInformation - UseCulture 'C:\vm_report_$cl.csv '.

  }

  Note: each csv is generated for each cluster

  CL.txt lists the clusters , but all I get is several files with the same content, and they are not properly renamed

  How can I do to generate 1 csv by cluster ?

  For example, there are 3 groups A1, A2, A3 (in file cl.txt), we get 3 csv files generated individually A1.csv, A2.csv and A3.csv and related data in them:

  A1.csv :                                                                 A2.csv :                                                                    A3.csv

  Host cluster VM RAM (GB) Cluster ESX VM RAM (GB) Cluster Host ESX VM ESX host

  A1 sx0001 su19001 4 sx0001adm 32 su1386adm su10670 A3 iu01990 A2

  Sx0001 su23000 A1 2 A2 sx0001adm su12404 32 A3 sx1385adm su10034

  Sx0002 su55000 sx0002pack sw12785 A1 2 A2 1 A3 su1384adm iu00025

  Help with this script would you gladly.

  Thank you

  Joseph.

  Judging by the timestamp, it seems that these files with spaces between the file name and file type, were made yesterday.

  This might have been one of your previous tests?

  Maybe do a series of tests of the script in an empty folder.