Cannot copy file to virtual machine host computer

Similar Questions

• Disable copying files between virtual machines

  When I go to several virtual desktops using VMware View 4, I am able to copy files between virtual machines. Virtual machines are located in various isolated networks. It is a security problem in my organization and how do I disable this feature? I am not able to find any related configuration in sight connection to the server. Thank you!

  I assume you are using RDP as the Protocol currently, correct?

  In this case, you will need to implement some GPO:s in the workstations to avoid copy and paste.

  Look in the 'Extras' folder on the view connection server, there are a number of ADM files that you can implement to restrict all sorts of things.

  Best regards

  Linjo

  If you find this information useful, please give points to "correct" or "useful".

• How access host files to virtual machine, host is Windows Vista and Red Hat Linux virtual machine?

  Please can you let me know them below, thanks, really appreciate your help on this.

  How access host files to virtual machine, host is Windows Vista and Red Hat Linux virtual machine?

  Thank you and best regards,

  Sam

  The RPM of samba must exist in the CD of RHEL itself. in any case, you can use winSCP tool to your windows host.

• Possible for the host to read the files on virtual machines?

  Is it possible for a host read files on virtual machines?

  If you can get information using vmrun command, then I think that vmware-cmd command will help to define the variables that can think inside the vmx file. As vmx file is inside ESX server only so that you can shut down the VM and edit the vmx file, then you can register to the virtual machine using the vmware-cmd command.

  Thank you

• Copy of ESX virtual machine to Workstation

  I managed a number of virtual machines hosted in a datacenter on ESX 4.  I had a request from a colleague to get a copy of a virtual computer so that it can work with it using VMware Workstation.  It is my understanding that simply copying the virtual machine are not working files of the ESX host to a laptop.  I was under the impression that the virtual machine should be converted using VMware Converter.  I also had the impression that there may be problems associated with the different chipsets: ESX host uses a chipset, while my colleague's cell phone uses a different chipset.

  Can anyone confirm or deny the above?  Are there other issues that we should be aware of when you copy a virtual machine from one ESX host to a laptop (Windows XP I think)?

  See you soon,.

  Paul

  Here are a few methods described.  For me, the converter is the best option because he can take care of any change in format which may arise between the VM ESX and VMware Workstation VM.

  http://KB.VMware.com/kb/1000936

• Cannot copy file: cannot read the source code or drive WINDOWS XP

  I'm trying to transfer pictures on my old XP computer on an external hard drive.  After performing a backup on the drive hard seagate WD I went looking for pictures on the external hard drive, and they aren't there.  I went back on the XP machine and tried to copy the files to a CD but I get the message cannot copy file: cannot read the source code or the player.  I can open images but cannot move it to another folder or copy and paste pictures anywhere.  The photos are saved in an outdated version of microsoft's digital imaging software.  Help, please.

  Hello

  (1) is the specific question of the images?

  (2) where the images are on the computer?

  You can try the following methods and check the status of the issue.

  Method 1:

  Configure the computer to clean start State to check software conflicts. See the following link on how to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 4 of the above article.

  Method 2:

  If the problem is specific to the pictures folder, then it might be a problem with permission. You can try to take ownership of the folder and check if you can transfer it. read the following article.

  How to capture a file or a folder in Windows XP?

  http://support.Microsoft.com/kb/308421

• You cannot power on a virtual machine in a virtual machine

  Hello

  Only, I converted a physical blade to a virtual machine running on ESX4 using VMware converter 4. The converted virtual computer is running VMware server 1.0.5 and machines virtual option 2. After the P2V process, I am unable to power on virtual machines in VMware server. I get the following message:

  You cannot power on a virtual machine in a virtual machine

  I see there are some entries that I can put in the vmx file

  monitor_control.vt32 = 'TRUE '.

  monitor_control.restrict_backdoor = 'TRUE '.

  However, this does not solve my problem. Is it possible to edit a VMX VMware Server so the virtual prompt runs in a virtual machine of ESX4

  Thanks in advance

  Oli

  VMware Server 1.x does not support nested virtual machines.  Workstation 7 is the first product with the official support of virtualization nested, although other recent VMware products should work, with some constraints.  See nested running VMs.

• Win XP Edition family service pack 2 'cannot copy file ".

  When you try to update to service pack issues 2, then 3, I get always the same, the Setup program cannot copy the file... After recently trying to update my computer XP home plant and installation of service pack 2, I came across the following issues.

  "Setup cannot copy file 'nslookup.exe'" follow by "Setup cannot copy the file"winlogon.exe"

  leaving 'Cancel' as the only choice the program then deletes all the installation files, crashes and gives me no alternative but to re - install windows.

  Is there a simple solution to this problem? I am sick and tired of not being able to properly update and reinstall windows. the only time where service pack installed successfully he eventually make my useless Control Panel.

  Aaron

  Error message during the "Complete Installation" when you try to upgrade to Windows XP: "Setup cannot copy the file.
  http://support.Microsoft.com/kb/915161

  FYI - problem solver Windows XP Service Pack 2
  http://winhlp.com/node/125

  TaurArian [MVP] 2005-2010 - Update Services

• Cannot copy files from HD to CD by using wizard.

  Original title: not accessible - incorrect function.

  Cannot copy files from HD to CD by using wizard. Have been able to do for a long time. Without warning is no longer possible.

  Hello

  The format of the files you want to copy basically described what kind of files they are. Word documents, of .mpg, jpeg, etc.
  However, it seems that the problem is with the drive itself, not individual files.

  You happen to have any installed Roxio program? Specifically, Roxio Easy CD Creator?
  If so, you should remove this program, restart the computer and try again.
  I hope this helps!

• Upgrade Vista to Windows 7 error: "Windows cannot copy files required for installation. The files may be damaged or missing. Error Code Ox80070017.

  I am upgrading of Windows Vista Home Premium (32-bit) for Windows 7 Home Premium (32 bit) - but getting stopped everytime I try, I end up with a dialog box stating: "Windows cannot copy files required for installation. The files may be damaged or missing. Make sure all files required for installation are available, and restart the installation. Error Code Ox80070017.

  What should I do to resolve this problem and allow full of Windows 7 installation? (my computer is a Compaq Presario V6000).

  Hello

  What installation media you are using?

  Method 1:

  Error 0 x 80070017 translates "CRC error" which means that the files that are copied from the disc are not making it to the hard drive with the same structure, which means that the 'original' the disk files are modified/changed/corrupted while being copied to the location of the 'destination' on your disk during Setup.

  This usually means a bad DVD, or an error reading on the DVD player.

  I suggest you follow the link and check.

  Upgrade Windows Vista to Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7?T1=tab02

  Method 2:

  Temporarily disable the antivirus on the computer running software and check if you are able to install the software.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  WARNING: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  WARNING: There may be loss of data through an analysis using firewall to eliminate the virus as appropriate

  Method 3:

  I also suggest you to follow the link and check.

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

• Windows cannot copy files required for installation. The files may be damaged or missing. Error code: 0 x 80070241.

  I had a lot of trouble trying to install the 64-bit version of windows 7 Home Premium on my 64-bit vista, and my question is multi-part. If it is relevant, it's my 2nd copy of windows 7 I have tried. Initially, I had the problem of not being able to run the installation on two copies with the error "'autorun.dll' could not be found or is damaged. Error code is [0x7E]. "However, I managed to get into with my 2nd copy installation after restarting my computer. Once in Setup, I got another error that stopped the installation that says "windows not could create an installation folder. Error code is 0 x 80070017. "Again, I rebooted my computer and started the installation again, this time following installation was decently through but stopped when I got the error"Windows cannot copy files required for installation. The files may be damaged or missing. Error code is 0 x 80070241. "I then backed up and restarted my computer and then tried to use the option to install custom but then got the error"E:\sources\autorun.dll is not designed to run on windows or it contains an error. Try to install the program using the original media, or contact your system administrator. "coupled with the error"the file 'autorun.dll' could not be loaded or is corrupt. Error code is 0xC1"again once I restarted and tried the custom option but got the error" Windows has no load the required file WinSetup.dll.» The file is possibly corrupted. To install windows, restart the installation. Error code is 0x3E6. "I restarted my computer and tried the custom triple option more and still have the error"Windows cannot copy files required for installation. The files may be damaged or missing. Error code is 0 x 80070241. »

  I understand that my problem is very complex, but it seems to be built around a missing or damaged file. Thanks if you can tell what's wrong or what to do.

  Tips for solving common problems when Windows 7 won't install troubleshooting

  1. start Windows Upgrade Advisor to see if there are known issues that might affect the installation and correct them.
  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  2 disable any security software, including anti-virus programs and firewalls.
  3 make sure that your computer has the BIOS and latest drivers.
  4. disconnect all external devices except the keyboard and mouse before installing.
  5. If your computer/motherboard integrated video use and remove the dedicated video card.
  6. If you have a large amount of RAM (memory), try to reduce the amount of RAM installed. 1 GB if 32-bit installation, 2 GB for 64-bit, then replace RAM if the upgrade was successful.
  7. If you have downloaded Windows 7 and it burned a DVD test burn again at the slowest speed possible. It is also possible the download may have errors, you can try to download it again.

  8. check your RAM (memory) to find errors. This can take some time.
  (A) Insert the Windows 7 DVD and restart the computer.
  (B) start from the Windows 7 DVD.
  (C) select your language, and then click Next.
  (D) click on "repair your computer" then select the operating system to fix it.
  (E) click on the link of the Memory Diagnostics in the system recovery menu.
  (F) the computer will restart and your memory is checked for errors.

  9 turn off startup programs:
  (A). Click Start, type MSCONFIG in the search box and press ENTER.
  OK the authorization of user account control and password if necessary
  If you are using XP: click Start, run, and type: MSCONFIG and click OK.
  (B) on the general tab, click Selective startup.
  (C) just below the selective startup, clear the checkbox "Load Startup items".
  (D) click the Services tab, check "Hide all Microsoft Services", and then click Disable all.
  (E) click OK, and then restart the computer.
  (F) try the upgrade again.

  (NOTE: If the upgrade fails and you continue to use your rear security software, then also go back into MSCONFIG and under the general Tower XP/Vista tab, click "Normal startup", and then click OK to exit.)

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Commands to start and stop a virtual machine hosted by VMware player

  Where can I find the commands to start and stop a virtual machine hosted by VMware player on a host Windows Server 2008 R2 (64-bit)?

  I need to start and stop the virtual computer from a script as I could do this by selecting the ' power on ' and his 'guest stop' or at least 'power off' options of the GUI of VMware player.

  If a control interface is not available, is available if I update to VMware Workstation?

  Concerning

  Marius

  With the player, the VIX API is a separate download (on the same page you downloaded the install drive in), so I guess you will have to install the separate package to use it.  But it's pretty easy to do...

• How to list files in virtual machine?

  I have two hard drives on my Vmware host. There are virtual machines on a SATA drive, how can I list the files of virtual machines?

  Thank you!

  George

  You must locate your target VM data store and navigate from there. See attachment below:

  

  vcbMC - 1.0.6 Beta

  Lite vcbMC - 1.0.7

  http://www.no-x.org

• Copy or duplicate virtual machines

  I installed ESXi 3.5 and I use VMware Infrastructure Client to manage.

  How can I copy/duplicate existing virtual machines the simplest and fastest way?

  I tried to copy files between folders, but the server hanging, so I presume that there is a better way...

  Concerning

  Marius

  Simplest is to clone virtual machines, but this feature is not available in free ESXi, you have vCenter.

  So I guess the only way is to use FastSCP (free tool), download power power VM off to your office and new different directory. Then right click on .vmx datastore browser and "add to the inventory.

  ---

  VMware vExpert 2009

  http://blog.vadmin.ru

• where on my Mac "file" a virtual machine?

  I'm new to VM Fusion. Used to extract the partition Boot Camp on my old MacBook, and I copied the whole file (almost 5 concerts) to my MacBook Air.

  So now this file called "Boot Camp partition" is sitting on my desk.

  (1) where I can drop it so this VM Fusion can find when I start the program? In the Documents folder? In some folder that VM Ware sets up for such things? Simple question, but I have no idea...

  (2) can I rename it to something more descriptive, since it is a copy of the virtual machine to reside on my Boot Camp partition?

  Other than these issues, it seems to work perfectly.

  Thanks for the help,

  David

  The default location for the virtual machine based on a normal file is "$The specified element was not found./Documents/Virtual Machines" but you can put where you want that you have proper access to the.

  You can rename directly from the Virtual Machine library window.