Access BIOS Setup

Similar Questions

• 4730 proBook s: when I try to access BIOS Setup, system diagnostics display

  Please help me guys
  When I try to access the BIOS Setup
  Diagnosis appear, and even impossible to access Boot Options
  
  I am pressing F10, and when I try one of these (Startup Options, BIOS)
  Please help me HP only in this one
  I'm in a lot of trouble at the moment, and if I can't solve this problem, I have to pay over $ 300
  Thank you

  Hello M.

  Remove the battery and the AC adapter, press the power 1 minute button to reset capacitors.

  Next step the unit only with the power adapter and press ESC at startup, and then choose F10 option.

  If the problem persists perhaps your HARD drive may have problems, then test the device without a HARD drive.

  Concerning

• Key F12 C850-F0055 statellite access Bios setup

  Statellite C850-F0055 could not boot.it said check media (failure).
  I then change the boot from normal to quick start. Since then, his word
  "NO device bootable - please don't restart.

  When I press the F12 key to start it does not have the configuration of the bios.
  How can I change this back to normal fast start so that it can make the configuration of the bios. Help, please.

  > How do I change back to the normal quick start so that it can make the bios Setup?
  Open the office help > tools and utilities > system settings > starts and you will find option startup speed. Here, you can change back to the normal mode.

  Please try it and send feedback.

• Z61t - Error Codes: 0176 and 0271 - cannot access Bios Setup Utility - help!

  Greetings.   I have a portable Z61t and just when I booted up it I got two errors: 0176, which is a mistake of security/tampering and 0271 indicating the time and date are not set.  From there I guess he's trying to load the BIOS configuration so that errors can be corrected, but it requires a password that I do not have.  After the manual removing the main battery and the battery backup will solve the problem of password, but it's NOT.  Nothing I've tried has allowed me to get past this screen.  I can't even work around it and just get the operating system to load.  I've read tons of forum discussions, but so far nothing I've tried has worked.

  The password it is demanding is the supervisor password, you need to remember or find out that value.

  More information;  Password lost or forgotten - ThinkPad General

• Redefinicao de Senha of Bios Setup

  Boa noite,

  Saber como CFFO Gostaria para resetar a senha da bios meu laptop (HP Pavilion dm3-1035br). Preciso access o configuration para alterar a forma para DVD boot. MEU sistema operational e Windows 7 Home Premium 64 - bit esta corrompido e nem o recovery esta dando certo. Finally... preciso formatar meu notebook mas para isso preciso Danielle a senha da para ter access bios Setup ao. Voces hate me help?

  No aguardo

  Tatiane

  Tatiane try.

  22831209

  Only the "QWERTY" keyboards

  Only uma noted - is voce participar desta pirates, lo devo than estes servicos nao sao endossados Informática pela HP, e as a nao HP is responsabiliza por registaram danos well arise ao seu sistema using esses servicos. Por favor, is poor as voce faca isso em seu proprio risco.

   

• Cannot access the Setup of the BIOS on my Satellite C660-24F

  I can't access my computer laptop Bios Setup - when I pres F2, F11 or F12

  * Satellite C660-24F PSC1NE *.

  He only statup Windows can't access the BIOS boot menu. I looked BIOS updat for my Satalite C660-24F - PSC1NE model - and I have not found on this web site.

  Can someone help me please?

  Have you changed the settings in BIOS?
  You may have turned on option quick start?

  Please do not forget that do you close regular. Also test F8 option.

• Portege Z30 - cannot access the bios Setup

  Hello

  I can't enter BIOS setup when starting. Pressing on F2 allows me to enter the master password and HDD/SDD (confirmed validation), but the screen freezes at the "Toshiba configuration utility' graphics without any progress.

  This problem began to appear quite suddenly, I enter the setup of BIOS several times before without any problem. The only change that's happened that I know is an event of disruption/recovery failed.

  My suspicion is that the laptop is now in the start-up of hi-speed system. Can anyone confirm that? Is it possible to force it to boot normal start time? I'm using Linux, so I can't use the Windows of Toshiba Utilities.

  > I'm using Linux, so I can't use the Windows of Toshiba Utilities.
  That s bad:(dans le Toshiba HW Setup vous trouveriez un paramètre pour modifier l'option vitesse de démarrage.)

  > My suspicion is that the laptop is now in the start-up of hi-speed system. Can anyone confirm that?
  Hmm in my opinion, if the start-up speed would be set to fast, you wouldn't be able to press F2 and enter the BIOS password.

  However, in other cases, if the startup mode is set to fast, you can enter the first INS key BIOS and press the F2 key

  Give it a try.

• Satellite 1400-103: cannot access the BIOS Setup

  I have problems to enter the BIOS setup. At the start screen 1, I press ESC, and then check the system appears. Then press the F1 key. Once on the button, it takes me to the BIOS Setup and reboot the laptop. Any help will be much appreciated.

  James

  The laptop starts properly? I want to say is possible to get into the Windows operating system?

• To access the BIOS Setup on Pavilion G62 running Windows 7

  I'm trying to fix a virus Malware white screen and in the process, I need to be able to start my laptop from the USB key. By pressing "ESC" annoys me to the Start Menu and which lists "BIOS Setup" as F10, but I can't scroll down to this option nor the fact by pressing F10 (or any other listed functions) get no response.

  Am I being dumb here or the Trojan horse has disabled the ability to use the function keys. If the latter is there anything else I can try please?

  Hi Malcolm,

  It is always interesting to try a Hard Reset as follows.

  Shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Plug the power adapter (leave the battery for now) and see if the keyboard responds.

  Another option would be to connect a USB keyboard (if you have one available).

  If there is no change, can you post back with the complete model number and the laptop Nr - see here for a guide to the location of such information.

  Kind regards

  DP - K

• How to enter the BIOS setup firmly

  8.1 - Whenstarting Windows that I'm trying to access the BIOS Setup. I push F2 repeatedlyeven after seizure-Toshiba screen is displayed. Almost always, I get on Windows system, only very few times I get to a tenth of a second at the left bottom of the screen saying line something like "to enter the BIOS. But then it is already too late to grab something. Is there a howto method course enter the savelie BIOS Setup? I have a Toshiba-computer laptop-P500-PSPGSE.
  Thank you very much in advance youvery.
  hansm

  F12 after start-up for multiboot-selection-Menu does not work either.

• Quick start function - how to access BIOS?

  Hello

  Recently, I activated the Fast Boot option in the BIOS and now I can't access BIOS again.
  I have try press F2 bit after power is on but does not work.

  Do you have ideas of how enter to the BIOS?

  Hello

  Quick start can be enabled or disabled in the system of windows running.
  Toshiba preinstalled application called system settings allows allows you to load the default settings.

  In the case where Windows 7 is pre-installed, check the tool called Toshiba HWsetup that should be included in all programs-> Toshiba

  But you should also be able to access the BIOS, press the INSERT key and then the key F2
  Also try the F12 key. Now in the boot menu should appear where you can choose the option Enter Setup.

  This will allow you to access the BIOS

• Portege R700 - access BIOS

  I met the flaw that arises on the addition of a password for admin for the BIOS on my R700. I added the password directly in the BIOS itself that I have re-installed windows on a SSD and as such do not have the installed toshiba bloatware.

  now when I try to access the BIOS at startup by pressing the ESC key, I get a black screen and white message saying press F2 to enter setup. I press F2 and the system restarts and the windows load, or if I press the same new message Esc. it will make a loop like that forever without access BIOS. pressing F1 doesn't do nothing as does the Esc at the request of press F2.

  so, essentially, I'm completely locked out of my own BIOS. I tried to put the old HDD back with toshiba inside Security Manager, but it does not find any BIOS password so I can't remove it using this

  My next plan was to simply remove the computer and remove the CMOS battery and allow the BIOS reset to default values... However I know that this works on some computers not all, so my question is, is - it's worth it? or if not what can I do to get back into my BIOS?

  Thank you

  Ben

  Hi 1994F7PT

  Turn on your laptop and press INS key and the prompt for the supervisor password. Enter the password supervisor and when it s created then a menu appears with the following operation (F2 for BIOS, F12 for the boot menu, etc.).

  Check this box!

• HP Compaq 6000: Access BIOS

  Is F10 key to use P.O.S.T. to access the configuration of the BIOS on this machine?  (HP 6000 and 6100)

  Thank you

  Larry

  Hi, Larry:

  If your model is the HP 6000 Pro desktop version, then Yes, you press the F10 key at the beginning of the HP welcome screen to enter the BIOS Setup menu.

  If this does not work for you, try to clear the CMOS memory.

  To clear the CMOS memory, see Appendix B, pages 57 and 58 of the guide to troubleshooting on the link below.

  http://h20565.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=4023814 & docid = emr_na-c01870980 & docLocale = en_US

  If clearing cmos is unable to remedy the problem, so I don't have any other suggestions for you.

• Re: Satellite A500-1GL - Can t Access BIOS aftre updated

  Hello
  I have a laptop A500-1GL.
  Yesterday, I checked that the drivers download page, just to check if there is something new. and I noticed that there was a new version of the BIOS.

  My old BIOS:
  SystemBiosVersion: 1.6
  SystemBiosDate: 05/06/10

  the Web site was:
  Version: 1.7
  Date: 29/07/10

  So, I downloaded this file and flashed the BIOS... after the reboot, I checked the "regedit". and the version was changed to 1.7, but the date remains the same (05/06/10)!

  Now, this isn't a big problem - I know, but I wanted to check the BIOS configuration (before the start).
  So I restarted the laptop, you press "DEL"... nothing happened, went straight to Windows!
  I tried again, with F1, F2 ~ F12... anyway.
  So, how can I access the BIOS Setup screen? I tried re-flashing the BIOS again, but he keep saying that I already have the new version, so I can't flash.

  any ideas?

  Hello

  > So, I restarted the laptop, you press "DEL"... nothing happened, went straight to Windows!
  > I tried again, with F1, F2 ~ F12... anyway.

  It looks at, start fast, active in the Bios. Read this thread, the Andrusito guy explained how he has disabled it:

  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=208999#208999

• Satellite L750 - 1 DM-how to enter the BIOS setup?

  Hi all.

  Tried several combinations of buttons - such as "DEL" or F' or F12 and so forth--but nowhere I could access the BIOS Setup.

  Does anyone have any useful information?

  Best regards.
  Robbs

  F2 allows to access the BIOS
  Press F2 quickly several times in line once the laptop has been powered.