Access computer from the LAN on internet

Similar Questions

• I am trying to create a slideshow with Adobe Photoshop 12.  After a few episodes to work on it, some of the slide pictures disappear.  Very frustrating.  Why?  I'm to access photos from the catalogue and folders on my computer.  E

  I am trying to create a slideshow with Adobe Photoshop 12.  After a few episodes to work on it, some of the slide pictures disappear.  Very frustrating.  Why?  I'm to access photos from the catalogue and folders on my computer.  Disappearances seem random.

  Elements Photoshop Elements

• Trying to connect a computer to the lan port Aiport Express "auto assigned IP address"

  I am trying to connect a computer to the lan on my Airport Express port. In preferences, it says "status: connected, Ethernet has an assigned IP address and won't be able to connect to the internet." Any suggestions?

  An "auto assigned" IP address indicates that your computer could not find or negotiate with a DHCP server to obtain an IP address appropriate for network access.

  It should be more on your network to provide assistance if you need it. For example, is the terminal of AirPort Express the only router in the current configuration of your network? What exact model do? What is the brand and model of your modem Internet?

• My computer from the Start button does not respond

  Original title: my computer from the Start button is (no response), it shows nothing... no ductwork is.

  I am running Vista and when I go into my computer from the Start button it says (not responding) and does not show its readers just a big blank page. I do not have a shortcut on the desktop. He's NEVER done this before. I had internet Explorer (not answer) before but never my 'computer '! What would cause this?

  Hello

  1. Since when you are facing this problem?
  2. don't you make changes before the show?
  3 is the other shortcuts in button start doesn't work very well?
  4. have you run a virus scan?

  5. what happens when you type explorer.exe in the start search box and press enter?
  6. are you able to open that way?

  Method 1:
  You can perform a System File Checker on your computer and check if it works.

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file.  You can check the link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:
  Try to solve this problem with boot.
  Reference:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
  
  Method 3:

  I suggest you check for errors related to Event Viewer. You can check the link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
  What are the information in event logs? (Event Viewer)
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

• When you try to use the repair your computer from the advanced boot option option, it only shows a different user account and my username and password does not work

  Original title: when you try to use the repair your computer from the advanced boot option option

  When you try to use the repair your computer from the menu option options advanced startup, when it comes to the screen to select the user account it shows only a "another" user account and my username and password does not work, and the 'OTHER' this account is not on my list of user accounts... what should I do?

  Hi kennympeek,

  1. why you try to do the Startup Repair?

  You can try to perform the commissioning of repair using the audit and the disk Installation of Windows Vista.

  For estelle information links:

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Hope this information is useful.

• How to print things on my computer from the reader app on Windows 8?

  How to print things on my computer from the reader app on Windows 8?

  How to print things on my computer from the reader app on Windows 8?

  Hello

  Open the document in the player application.

  Press Windows + K logo to open the charm of devices.

  You should see your installed printer here.

  Concerning

• Cable modem disconnects my computer from the internet.

  OK, here's the problem. Just recently my computer has been disconnected from the internet. I'd watch the cable modem and it should be reset and then he would come back online. There is no problem with my hardward on Device Manager. The Cable Guy continues to tell me everthing works fine with the cable modem and my computer which is the cause of the problem. The problem happens only once in a while and different times. I havn't changed anything on my computer before starting to do. It was working fine before. I am also running windows vista, if this is useful all.

  Hi D_Sum,

  A. are there that lose the connection cable between the wall jack and the computer?

  B. recent changes made on your computer?

  Windows cannot make a cable mode is reset. The problem is the cable modem itself. You can update the firmware of the modem cable and also check the power source.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Impossible to travel from the LAN computers through a router from cisco 887vdsl

  Hi I installed a router CISCO v887 to the Amsterdam Office

  I set up a VPN between AMS and Edinburg Office tunnel.

  1. the VPN is running

  2. I am unable to see anything of the LAN computers at the office in Amsterdam.

  3 from computers LAN I can traceroute to yahoo.com but the browser I impossible to navigate on yahoo.com and web page hanged in this situation (Web site waiting for response). But nothing comes and LAN users are unable to use internet.

  Help, please

  My configurations are

  IP source-route

  !

  !

  !

  !

  IP cef

  IP domain name xxxxxx.com

  8.8.8.8 IP name-server

  No ipv6 cef

  !

  username xxxxxxxxxxxxxxxxx

  username xxxxxxxxxxxxxxxxxxx

  !

  !

  VDSL controller 0

  !

  property intellectual ssh version 1

  property intellectual ssh pubkey-string

  username xxxxxxx

  ssh - rsa xxxxxxxxxxxxxxxxxxx key hash

  quit smoking

  !

  !

  crypto ISAKMP policy 1

  BA 3des

  preshared authentication

  Group 2

  ISAKMP crypto key xxxxxxxxxx address 94.xx.xx.xx

  !

  !

  Crypto ipsec transform-set esp - esp-sha-hmac AMS - SET

  !

  map AMS - R 10 ipsec-isakmp crypto

  the value of 94.xx.xx.xx peer

  AMS - Set transform-set

  match address 102

  !

  !

  !

  !

  !

  interface Ethernet0

  no ip address

  PPPoE-client dial-pool-number 10

  !

  !

  interface Ethernet0.6

  encapsulation dot1Q 6

  PPPoE-client dial-pool-number 10

  !

  interface BRI0

  no ip address

  encapsulation hdlc

  Shutdown

  Multidrop ISDN endpoint

  !

  !

  interface FastEthernet0

  load-interval 30

  Speed 100

  PPPoE-client dial-pool-number 10

  !

  !

  interface FastEthernet1

  !

  !

  interface FastEthernet2

  !

  !

  interface FastEthernet3

  !

  !

  interface Vlan1

  10.0.12.1 IP address 255.255.255.0

  IP nat inside

  activate nat IP

  IP virtual-reassembly

  !

  !

  interface Dialer0

  no ip address

  Shutdown

  !

  !

  interface Dialer10

  the negotiated IP address

  NAT outside IP

  IP virtual-reassembly

  encapsulation ppp

  Dialer pool 10

  Dialer-group 10

  PPP authentication pap callin

  PPP chap hostname xxx@xxx-ZDSL

  PPP chap password 0 xxx

  PPP pap sent-username@xxx-ZDSL password 0 xxx xxxx

  No cdp enable

  AMS - R-crypto card

  !

  !

  IP forward-Protocol ND

  IP http server

  no ip http secure server

  !

  !

  IP nat inside source overload map route sheep interface Dialer10

  IP route 0.0.0.0 0.0.0.0 Dialer10

  !

  access-list 102 permit ip 10.0.12.0 0.0.0.255 10.0.0.0 0.0.3.255

  access-list 102 permit ip 10.0.12.0 0.0.0.255 172.16.0.0 0.0.255.255

  access-list 102 permit ip 10.0.12.0 0.0.0.255 172.17.0.0 0.0.255.255

  access-list 102 deny ip any one

  access-list 175 deny ip 10.0.12.0 0.0.0.255 10.0.0.0 0.0.3.255

  access-list 175 deny ip 10.0.12.0 0.0.0.255 172.16.0.0 0.0.255.255

  access-list 175 deny ip 10.0.12.0 0.0.0.255 172.17.0.0 0.0.255.255

  access-list 175 allow ip 10.0.12.0 0.0.0.255 any

  Dialer-list 10 ip protocol allow

  Dialer-list 1 ip protocol allow

  !

  !

  !

  sheep allowed 10 route map

  corresponds to the IP 175

  !

  !

  control plan

  !

  !

  !

  Line con 0

  no activation of the modem

  line to 0

  line vty 0 4

  access-class 1

  exec-timeout 30 0

  privilege level 15

  password xxxxxx

  local connection

  preferred transport ssh

  entry ssh transport

  !

  max-task-time 5000 Planner

  end

  Hi Marc,

  Please add these lines highlighted below on both interfaces.

  interface Vlan1

  IP tcp adjust-mss 1412

  interface Dialer10

  IP mtu 1452

  Please update.

  Thank you

• How to find my computer from the start menu

  There is NO ICON FOR 'MY COMPUTER' FROM DESK TOP, HOW DO i FIND IT?

  Press on the key and E.

• scanning of pictures on my computer from the series of J611 all-in-one HP Deskjet 3050 has

  I've uninstalled and reinstalled the software, but when I try to scan, the message arrives that the scanner can not find my computer.  What should I do now?

  Hello

  It's much better scan from your computer, this method allows more options. But if you want to scan from the printer to your computer, you must initiate or enable the analysis of the computer first TO your computer (Windows):

  (a) click (or double-click) the printer icon.
  b click on Manage scan of the computer,
  (c) enable

  You can start this option with Windows by checking a square box.

  Kind regards.

• Remove computer from the domain network

  My son received a computer for the home from work that is configured for the network. When starts to login ask for username and password, well-functioning work, but at home is back with cannot find the area and the departure of wan't to computer. Can anyone suggest how to get around this connection and how to disable the connection of field or to take it on the network. Very much appreciated. Please if you can send me an email to * address email is removed from the privacy *. Thank you-

  With a used computer, especially one that is part of a domain, the first thing to do is a clean install of Windows. This removes the need for a knowledge of passwords as well as tattooed the field settings.

  http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
  http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - what you will need at hand

  MS - MVP - Elephant Boy computers - don't panic!

• After you install the updates, programs disappeared from the start menu, internet connection fails after leaving "sleep" mode and the system restore disappeared.

  Original title: most of the programs have disappeared from the start menu.

  Family Vista using premium, updates of Windows installed 10/8 then found that most of the programs has disappeared from the start, internet menu connection fails after that out 'sleep' mode and restore Sytstem disappeared.

  Help please

  Hello

  Please see below for a possible solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/programs-missing-from-start-menu-in-Windows-7/507709ad-EDBB-46e7-AF44-11a64d36b854

  Also, please create a new user profile and see if the problem is there again. If this is not the case, see the following:

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

• How can I fix my computer from the cd when I only have the cd manufactors and not a vista actuall cd?

  I tried windows repair, and it didn't do anything. It seems that the computer starts but I only get the logo of microsoft with the green lights moving from left to right and then he sends me just a black screen.

  Hello

  You can download and make a startup disk repair or borrow a microsoft dvd vista

  It's a startup repair etc. NOT a resettlement system that needs to be done with a microsoft vista dvd from one of operation vista running syastem

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• How is - a uninstall programs that have been assigned to the Program Files (x 86). I can't access it from the control panel

  I have programs that have been assigned to the (x 86) think I wantt files to uninstall but cannot access the (x 86) from the control panel

  Try this program.

  http://www.revouninstaller.com/

  I hope this helps.

• Remove the computer from the account

  Is it possible to remove a computer from my account that I no longer use

  Please see Learn how to enable or disable Adobe apps.

  In the case of any problems, you can view Adobe to solve the problems of activation and deactivation of the questions

  Concerning

  Hervé Khare