Access denied to kill/start/stop a service with an administrator account

Similar Questions

• Impossible to retart Window XP as an administrator with the same "selective startup" newspaper (with some third party being disabled services) with an administrator account.

  My computer is a Sony (Vaio) desktop computer with Microsoft Windows XP Professional edition,
  service pack 3. It is installed with Internet Explorer 8.

  I meet the Internet Explorer 8 problem right after I tried to run Norton
  Antivirus (2012 version) Live updates some time ago. Updates Live has not been successfully

  completed.

  I tried to open Internet Explorer 8 to connect the site msn.com and others
  Web pages. It still gives me the message "Internet Explorer cannot Display the Webpage".

  I did a full system scan. The computer is clean.
  I also tried to remove all the Internet Explorer add-on to and reset all settings
  by default, but I still can't get Internet Explorer to work.

  I think that something that connects it to the operation of Internet Explorer 8 has been 'broken '.
  during the download of updates to Norton Live. Maybe it's because as the "dial-up".
  slow internet download speed I use, caused some kind of file corruption.
  I'm not too sure.

  I followed a suggestion to Microsoft support engineer in Microsoft Support community
  and I tried disabling Norton services in starting the configuration to see if
  Internet Explorer will work back or not. However, after I did

  Start > run > msconfig

  and all unchecked Norton services and retarted the computer. I had
  an error message saying "I need to log in as an administrator in order to retart.
  the computer with selective startup"even I had logged in as administrator.

  I turned off the computer and retried the above process again, but I still
  got the same error. I did several times without a bit of luck.

  My computer is used only by myself. My user account is an administrator of type with
  all permissions. It is the only user account in my computer.

  I don't know if other permission settings that must be set correctly in order
  for me to retart the computer with the "selective startup" option

  I hope that someone in the Community Support of Microsoft can give me some suggestions and
  instruction. Thanks a lot for your help.

  Best regards
  vichau

  My computer is a Sony (Vaio) desktop computer with Microsoft Windows XP Professional edition,
  service pack 3. It is installed with Internet Explorer 8.

  I meet the Internet Explorer 8 problem right after I tried to run Norton
  Antivirus (2012 version) Live updates some time ago. Updates Live has not been successfully

  completed.

  I tried to open Internet Explorer 8 to connect the site msn.com and others
  Web pages. It still gives me the message "Internet Explorer cannot Display the Webpage".

  I did a full system scan. The computer is clean.
  I also tried to remove all the Internet Explorer add-on to and reset all settings
  by default, but I still can't get Internet Explorer to work.

  I think that something that connects it to the operation of Internet Explorer 8 has been 'broken '.
  during the download of updates to Norton Live. Maybe it's because as the "dial-up".
  slow internet download speed I use, caused some kind of file corruption.
  I'm not too sure.

  I followed a suggestion to Microsoft support engineer in Microsoft Support community
  and I tried disabling Norton services in starting the configuration to see if
  Internet Explorer will work back or not. However, after I did

  Start > run > msconfig

  and all unchecked Norton services and retarted the computer. I had
  an error message saying "I need to log in as an administrator in order to retart.
  the computer with selective startup"even I had logged in as administrator.

  I turned off the computer and retried the above process again, but I still
  got the same error. I did several times without a bit of luck.

  My computer is used only by myself. My user account is an administrator of type with
  all permissions. It is the only user account in my computer.

  I don't know if other permission settings that must be set correctly in order
  for me to retart the computer with the "selective startup" option

  I hope that someone in the Community Support of Microsoft can give me some suggestions and
  instruction. Thanks a lot for your help.

  Best regards
  vichau

  Repair facility and get rid of Norton once you are able to get into your computer again.

• Start/stop EMP services.

  Hello

  There is a standard way to start and stop services using "start.sh" and "stop.sh".

  (1) is there another way to start and stop services?

  (2) if I start/stop them individually should what order I follow?

  
  Kind regards.

  Yes the relational database for schemas of Hyperion.

  Function of the questions then uou can restart specific services and do not have to run the scripts/full stop, for example if there is a problem with the web application planning you could restart on its own.

  See you soon

  Joh

  http://John-Goodwin.blogspot.com/

• Access denied at the request of associated services info - custom object 4

  Hi guys,.
  
  Recently, I am faced with this question, I associate CustomObject4 SR SR of related information and grant appropriate access directly in the access profile (the two SR, K4 SR bound K4, owner and default profile and info) and record the type of access to a user role. At the same time access to the right of this role in the book (SR) is set to read-only. But it displays error access denied 00553 when the user displays SR never belonged does not in itself.
  Then, test us on access to the right of this role in the book, this error just keep on when we change the law in full. Finally, we change the law to an access profile (which corresponds to that applied to the management of the roles), this error before disappearing.
  Anyone has an idea about this? I think book have an impact on access right to the folder type related information. But can not understand how it works.
  
  Thank you
  Lucy

  Hi Lucie,.

  In order for a user to access the information contained in a book of business, access to books should be given in the user's role and access user profiles. To determine the level of access that a user has a book, control of access in CRM On Demand system calculates all relevant access profiles more liberal rights and applies them.

  Kind regards
  Cameron

• SQLFire: Failed to start and then can not close-"Access denied" & "could not start the"sqlfire"database

  I ask a question, expanding to another thread 'http://communities.vmware.com/message/1884835', on the start-up and stop SQLFire.

  My topography has four servers, two locators, and two servers (Server 2 SQLFire each) on which the database is deployed.  When you start the batch, without no history running, all right.  Adding and removing servers in the cluster, also seems to work very well.  However, when the whole of the system, its stopped by sqlf shut-down-all, it starts up, things go wrong.

  I met the same problem described by the called thread, that is, it seems to be an addiction to data - which is not resolved.  I start locators first, one at a time.  When one starts, data dependence becomes apparent.  The Locator seems to start, but the sequence goes in a loop around the data dependence.  When you try to stop the same Locator, he returned in a "stopping" State, where it does not recover.  Try a reboot, translated by [A SQLFire Locator works already in the directory "C:\SQLFire\Locator"].  The "stoppage of sqlf Locator", producing a further: "timeout for SQLFire Locator at the stop, the status is: SQLFire Locator pid: 4956 status: stop ' results; and the "sql shut-down-all:, throws a long error that includes:" java.io.FileNotFoundException: shut_down_all.log (access is denied) "and 'Could not start the 'sqlfire' database'. '.  Both of these appear to be the crux of the matter.

  I don't know what data it is dependent, because I haven't added all the data that will be persisted.  However, the system starts with default records.  I tried to check if these default disks are required, which seem not to be and I'm leaving for the partition and replication information, to read when the system starts / begins.  I can't understand why locators cannot start without the database, without any dependence on the data, and also why the system seems to require a sequence to start.  Is that not the purpose of SQLFire, i.e. a solution supporting the cross, which can be started in any sequence of old?  If an operator needs to get this bad, for a production system, should be that the entire solution be recharged from external sources, and that could take awhile.  It would seem, once the system in this state, i.e. the dog chasing its tail, he doesn't get, and I have to delete all the bookmarks and servers and launch all to reboot from external data sources.

  I'll be dilly, or is it a problem in general, experienced by others?

  I would be grateful for any comments, and if you could indicate the respective documentation, as I struggle to establish a correlation between the problems of documentation, even Google hits, when it encounters any problems with SQLFire.

  I appreciate your time and efforts.

  Hello

  I checked the docs and they are not accurate on information in Windows when using the cmd shell. The ampersand does not work correctly when called from a shell, Cygwin, or on UNIX/POSIX systems. Will get corrected.

  Please, use the start command to start in the background of a single command window / batch script:

  beginning of "locator" cmd /c sqlf locator...

  beginning of "server1" cmd /c sqlf server...

  etc.

  Add option/min to start the minimized for example windows cmd start 'locator' / min cmd /c sqlf locator beginning...

  Or launch each 'start-up of the sqlf Locator', 'sqlf-start server' etc to separate windows command prompt.

  Thank you

  Felicia

  Post edited by: SumedhWale

• Stop and start the Internet service with X 2000

  I just installed the X 2000 and managed to get my Win7 Home Premium connected to the Internet and also a wireless device. Previously, I had just a modem.

  Sometimes, when my PC is on, I want to disconnect from the Internet and then connect again.  There is an icon at the bottom right of my toolbar that allowed me to connect and disconnect with my old modem, but he seems to know only the old modem.

  Basically it is operated by the boot sequence: all items in Control Panel > network connections > connection broadband.  This function does not work; It tries to connect (via "WAN Miniport (PPPOE)") and gets "error 651: the modem (or other connecting device) has reported an error."

  Can you tell me what, where is the program that seems to start the connection Internet for the X 2000 and if I can change the settings of the Win7 "connection broadband" to use the X 2000?  Maybe the setting "Connect we Demand" in the "basic settings" of the X 2000 is involved?

  JoeCis wrote:

  Forgive me for being dense, but I think I understood that something in response to the "gv".  If I go to http://192.168.1.1/ , and click on the tab "Status", my "connection status" has the ability to 'Disconnect' and 'Connect'  If I click 'Disconnect' my PC will essentially be offline and, later, when I want to go online, I can click on "Connect"?

  1. This will cut the internet connection of the router. He cut the internet connection for all THE devices connected to the router. He kills the internet connection of your iPad, too.

  2. I think that there is no guarantee that the router resets automatically later.

  3. it is not your computer safer. In General, if you get malware from the internet it's while you're doing something in the internet, navigation, for example. So not navigation and does not download emails are for most people means more effective "disconnect from the internet. Cut the internet connection won't make a difference unless your computer is already infected in which case it won't matter either because the malicious software on your computer may also just sit silently and wait for the connection to return.

  4 disconnect the internet link for the safety of your PC is pretty useless. It will not matter. At that time there you do nothing in the internet anyway. And it's not as if a clean computer would suddenly be infected only because somewhere there is an internet connection. Your router is a NAT gateway. Your LAN is already isolated from the internet, which is inaccessible from the internet, unless you have configured port forwarding, triggering or DMZ host.

  5. keep your computer up to date. If you wish, you can put the computer on standby during the absence. Saves energy and not enough good you want to do, even if it won't matter to safety.

• Start stop while loop with tab control

  I want to be able to start and stop a while loop by entering and leaving a tab.  I use a structure of the event to do so, but it seems not elegant or the right way to do it.  The only way I could get to the kind of work is by unchecking the lock front panel in case of structure.  I have attached a sample vi of what I have so far.

  The problem is that you can't even stop the program by pressing the stop button until you exit the tab, which is not a user friendly interface.

  The event should just manage basic user events.  Any given event does not take a lot of time to run.  While you are in the diagnostics tab, your code is stuck in this while loop.  Although the setting of the front panel of the lock allows you to do other things, the LabVIEW is just put on hold all these other events of the UI (like Stop button value change) and cannot handle them inside while the loop stops and allows outside while loop to go through again.

  You should have a parallel while loop to manage waveform graph.  You can use notifiers or queues or a motor of action FGV (see Ben Action Engine Nugget) to switch the starting or stopping of the update of the chart of waveform until the parallel of while loop.

• Why do I get the access denied error message when you are logged in as administrator?

  "Error" failed to create the file 'C:\Windows\Fonts\[font name]. " Access is denied. "

  is received when I try to install a font by being logged on as administrator (I'm the only person who uses this)
  computer with password protection guest no account)

  or when I use WinZip the fonts folder is not available

  The fonts folder is blocked with a "read-only" access  I can't find any way to change the permissions on the folder (there is no security tab), and any attempt to change the status of reading is has met an insufficient privileges error message.  I notice that the fonts have been added during the last few days several times but I have nothing personally for it - he did alone (how I don't know).  I admit be baffled by your inability to add fonts using your CD (even though I'm reasonably sure it's read-only permission which is at the origin of the problem). I use Vista Business SP2 32-bit and my comments were based on it.  I never really tried to install fonts on my system, so I don't know if I would have the same problem - I presume that I would give for the same reasons.  The article I posted http://windows.microsoft.com/en-US/windows-vista/Install-or-uninstall-fonts explains how to install individual fonts in formats of special fonts - it does not how to do when you use a CD with an install button.  Have you tried right-clicking on the button install to see if it brings up the run as Administrator option (it probably won't)?  Here is another article on how to install fonts: http://www.lytebyte.com/2007/07/03/how-to-install-new-fonts-in-windows-vista/.  If you link to the CD player will be able to see the individual fonts and "select all" or according to which you want to install - instead of using the installation with the CD button (if you can find the right folder (s)).  Here is an article from third on the installation of the http://www.windowsreference.com/windows-vista/how-to-install-fonts-in-vista/ fonts that suggests using the install button should work as should drag / drop it into the fonts folder - thought we seem to be having trouble with these procedures (and I think he did the permissions block which I can't imagine why he's here or why there is no security tab allows you to adjust).

  Maybe someone with more knowledge (like Engineer Support or an MVP) see this thread and respond with a solution.  In the meantime, I'm puzzled.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• What should I do to solve this error message: DCOM got error '1084' trying to start the ShellHWDetection service with arguments "" to start the server:

  I'm on Vista Home Premium 64 bit on an HP Pavilion dv4 laptop... using my laptop in the last days, I got the blue screen, only the Blue has alternating vertical black lines through it... the other thing that happens is I use the laptop and my screen will get completely distorted and will lock the laptop.

  I ran an antivirus and it cleaned up a bunch, but I suspect, that there is more to do.

  I'm a bit technical, but expired (got my MCSE 10 years ago have left the technical aspect of life, and have a basic understanding of).

  Hello

  ·         Did you of recent changes to the system such as the installation of the updates?

  I suggest you to run the Microsoft Safety Scanner and check if the system is infected with a Virus/malware.

  See the link below for more information.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Check and make sure that all drivers are up-to-date.

  Reference:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  If the methods above do not help then I suggest you to post the question on the TechNet forum for assistance.

  http://social.technet.Microsoft.com/forums/en-us/category/windowsvistaitpro

• access denied when using jsff page but fine with jspx page

  Hi when I run my application am geing this error when the page loads I drag and drop of jsff page in my jspx page, but when I test the business view, that I can consult data read only mode the view has been created based on sql, but when I use only jspx page is fine I can load data

  for example

  Select empno, hr.employee depname

  am in jdeveloper 11.1.1.9.0

  

  solution

  include directly inside another JSPX - jsff put rather the jsff in a stubborn taskflow and then drag this taskflow in your jspx as a region.

• In safe MODE, search with the administrator account can not find secpol.msc, otherwise how can I access local policies?

  I need to disable the Mode of UAC Group Policy by accessing local policies in W7 but start/search can't find secpol.msc. Access is denied to the different files of the user, search on internet Explorer 9 wit request options for the approval of the system of. Iamthe single personal onthis computer administrator at home. Start/Search can not find secpol.msc, nor can I change the default search even IE9 mode without failure. How can I Devil Mode of UAC Group Policy and eliminate the ghost system administrator?

  If you have Windows 7 Home Premium then it didn't GOT secpol.

  Why do you feel the need to turn off UAC on a computer at home? You should not really, you know, and in fact there is absolutely no need to do.

  So what user files you are denied access to? Is it Documents and Settings perhaps?

• laptop HP Pavilion g7: pc does not start correctly and wiped the system administrator account

  The system failure. Was not properly closed. Now ask system administrator password but erased or has no listed listed system administrator account. So I can't enter my password and the pc will not restart correctly. I want to run a system restore but can't! I am stressed beyond my capabilities and am ready to lie down in the dirt and the scream. Please help me!

  Hello

  You're more than welcome, and I'll keep my fingers crossed that he finished restoring Ok

  Kind regards

  DP - K

• "Access denied" error on all hard drives external and MagicDisc

  I just purchased a Lenovo B575 running Win7 Home Premium and I'm very frustrated that I can't access my external hard drives, which are essential to my work. I get the error "Access denied" the normal start, but I'm able to use disks normally in safe mode. Here are some of the things I've tried:

  -Change the permissions/ownership after normal startup: does not work. Windows doesn't let me change the permissions or ownership, even if my single user account is set to administrator.

  -Change the permissions and ownership in safe mode: I found a solution online saying "Everyone" to add to the list of users in the Security tab. It works * temporary *, until I unplug my hard drives. When I plug back them, it's back to square one.

  -Install MagicDisc to access some files I saved in the form of ISO images: MagicDisc seems to work very well and load images normally... but also, I get the error "Access denied" when you try to open the drive in Explorer.

  -USB flash drives: same problem.

  -Other erratic behavior: one of my USB drives will not stop read/write as soon as I plug. I don't know if it's the McAfee antivirus analysis each of millions of files that I have on this subject, or if something else is happening.

  I had NONE of these issues on my old Acer and HP to my friend has no problem loading my readers. If I can't find a solution soon, I'll be forced to return this laptop that I need to access my work files.

  I lost my patience all yesterday and not the OneKey Rescue, restore my system to nine. Then, I named my new laptop of the same name that my old (relevant at all?). He immediately provoked a hard drive to work. The 750 GB it does not work yet, but I changed the permissions AND ownership to "Everyone" in SafeMode... now it seems to work correctly. No problem with other removable disks.

  That they are related or not, I have not initialized or changed some settings on the programs supplied with the laptop. My guess is that port Locker has something to do with the question I had - even if it has been disabled before. I'm uninstalling as I did not need. BioExcess, face recognition... everything goes down the drain. These should be optional, not enabled by default. Too many background services! I'm disabling a bunch of unnecessary stuff.

  Detective Conan?

• Access denied on the opening controls

  Trying to enter the recommended such command in Windows Update error 80246005 error handling to allow writing to the Catroot2 folder, I get the message "Access denied to c:\windows\system32\catroot2", even thougn, I am the administrator.
  This folder is write - protected, and I'm not able to change this attribute.
  So how to enter the command or access privilege?
  Thank you
  Ricky

  Moderator moved the thread to the Windows Update Forum to learn more focused on coverage.

  Ricky Sujan

  You make sure you running CMD as administrator? You are able to quit successfully all the other services mentioned in the recommended steps?

  <><><><><><><><><><><><>

  Check your environment and determine if you are logged in with an administrator account

  http://support.Microsoft.com/GP/Admin

  <><><><><><><><><><><><>

  1. run high CMD

  2. click on start toreduce this includes this image and then type cmd in the box start the search .

  3 right-click cmd in the programs list and then click run as administrator. Collapse this includes this imageIf you are prompted for an administrator password or a confirmation, type your password or click continue

  4. at the command prompt, enter the desired command and press ENTER.

  <><><><><><><><><><><><>

  If you need to confirm that you have administrator rights, and you follow the steps to run as administrator. Then, we will take possession of your system drive:

  1 click on Start-> click computer-> Local disk (default is C:)

  2. right click on the Windows folder for which you want to set permissions, click Propertiesand then click the Security tab.

  3. click on Advanced to open the Advanced security settings for dialog box.

  4. click on the owner tab, click on change. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  5. in the new Advanced security settings for box, in the to a change in ownership: field, select your user name and Verify the replace the owner of subcontainers and objects. Click OK, repeat for the remaining squares. (If your username does not appear click the button other users or groups to add your account).

  6. test the command you want to run again.

  <><><><><><><><><><><><>

  Please report your results so that we can help you. Please use the community support for Microsoft Vista.

  Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows XP SP3: Access denied error when you try to change the beginning upward in MS CONFIG. Director of applications but I am the administrator.

  original title: access denied errors when you try to change the beginning upward in xp sr CIP 3 msconfig. I am the administrator, please the administrator

  I am a user with privileges under windows xp pro service PAC 3. I recently received an access denied error message acusing me of not being the administrator when I tried to limit the start up programs in msconfig. What should I do these changes in safe mode?

  You have scanned your system for malware? It seems its infected with something. Download ccleaner install / run. Then go to tools / startup. Delete the entries that you want here