Start/stop EMP services.

Similar Questions

• Weblogic does start with EMP services?

  Hi guys

  I usually start my EMP services using the script./start.sh. Once the script has completed, I am able to carry my EPM applications.

  My question est,./start.sh script does not start weblogic (correct me if I'm wrong) that how I'm able to run applications that are deployed on weblogic server? When it does not.

  Concerning

  The script should start all the EMP components installed on the machine, it is be run by which includes weblogic web applications (not just the Management Server)

  "EMP heating contractor installs a single startup script in EPM_ORACLE_INSTANCE/bin, called start.bat | sh. run the script of single boot on a machine in your EPM deployment system starts all services of EPM system installed on this machine." The start script works by calling the individual start scripts for each product. »

  See you soon

  John

• Access denied to kill/start/stop a service with an administrator account

  I got this message when I try to start and stop a Service. Thank you

  Hello

  1 did you do changes on the computer before the show?
  2. what services you are trying to start or stop?
  3 are you referring to the service windows firewall?
  4. have you connected to the admin account?

  Method 1:
  You can check the link provided and check:
  Some services do not start in Windows Vista

  http://support.Microsoft.com/kb/943996

  Method 2:
  You can perform a clean boot, and then try to start or stop the services:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.

• automate start/stop service essbase Maxl or batch

  HI - how my lot or Maxl file look as if I wanted to go out with a script to stop and start my essbase service? The reason why I do this is because I wanted to stop the service of essbase, so that I can check it in the essbase.log file.
  
  I'm on essbase 7.0, I read some reviews that stop and start the service essbase can potentially damage the dry file. If Yes, then is it otherwise to archive the file essbase.log so that it doesn't grow in megs.
  
  
  Thank you.

  Hello

  You can use the following maxl

  change the shudown system;

  It may be useful to stop all applications first for example

  change the application system unload all;

  or you can use the windows command line

  net stop essbaseservicename

  and to start

  net start essbaseservicename

  Another method to save the essbase.log is to make a copy of the newspaper and then use maxl to clear the log.

  change the system clear logfile;

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Can not stop cryptographic services to rename the Catroot2 folder.

  Hello

  I recently bought Halo 2 for WIndows Vista and tried to run it on my pc, which uses windows 7 Home premium. Since I installed the game, whenever I play it stops, saying that "Games for Windows Live could not... etc" I looked up the solution on a microsoft forum, and he said to rename the folder c:\windows\system32\catroot 2 by stopping the cryptographic service. ""

  Whenever I try to stop the cryptographic service, I get:

  System error 5: access denied

  I tried running the cmd as administrator prompt, and I get the message: "the application pause, continue or stop is not available for this service"

  I can also rename the Catroot2 folder, as he always says: ' this folder could not be renamed because it is already in use... etc ", but I think it's because I have not stopped the cryptographic service".

  What I'm doing wrong and what should I do to fix this?

  Hello

  ·        Are you logged on to the computer as administrator?

  You try to stop the service in safe mode and check what is happening. To start in SafeMode followed the link given below.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  See also:

  http://social.answers.Microsoft.com/forums/en-us/vistagaming/thread/f966ba04-1cd8-4CFB-9b7c-0da90bd2d914

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Updates do not install, Sections of Vista does not and cannot start the Audio Service

  I try to install the updates on windows update but important as the service package 2 do not work, they start then stop and say failed code "WindowsUpdate_80070643"

  boxes keep popping up saying some files are damaged or not installed properly and that I should reinstall as a file call... system32\AVRT.dll. Windows Media is not no longer works.

  My Audio service is not running, I'm not sure that there is a problem in microsoft windows but the button to switch on the audio does not, and a box pops up saying it does not yet have another pop up says that everything works.

  any help? Please

  Hello
   
  a. updates have you tried to install?
  (b) button to switch on the audio of your computer are you using?
  c. what exactly happens when you try to run any audio/video file?

  You can try the steps outlined in the article below and check if this help.
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070643

  For audio problem you are trying to run the troubleshooter which may help. It search common problems with your volume settings, your sound card or driver and your speakers or a headset.

  1. open the troubleshooting of Audio playback by clicking the Start button, then Control Panel.
  2. in the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on the audio playback problems. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  You can also try to update check you and sound card driver if it works. The article below will help you do.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Also, check if the following services are set to automatic.
  a. Windows Audio
  b. Windows Audio Endpoint Builder

  Here's how:
  1. click the Start button, type services.msc and press ENTER.
  2. go to any services mentioned above at the same time, right-click on it and select Properties
  3. click on the tab general, select automatic for startup type. Also click the Start button, if it is not started.
  4. click the Dependencies tab and make sure that all addictions services are set to automatic. Then click on the OK button.

  After return to that exact error messages we can help you better.

  Let us know if it works.

  Kind regards
  Umesh P - Microsoft Support

• Windows cannot start the firewall service.

  Original title: my firewall stopped working and it won't let me turn it back on.

  My computer has alerted my that my firewall was off this morning. The alert came with the possibility to reactivate after having used the option of tis, another box emerged stating that it cannot be turned on again and try to activate it manually. I tried to turn it on manually and it still doesn't work. He is said to be the first "Windows Firewall settings cannot be displayed because the associated service is not running. You want to start the Windows Firewall Service? "after you press 'Yes', it says"Windows cannot start the firewall service. No error message is given. Any ideas?

  Hey, bed,.

  File system (CFS) auditor scan and see if it finds a breach of integrity. If so, System File Checker will try to replace missing or damaged files.

  Information available at:

   

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• On a 1100sa Pavilion DM4 how prevents one error message: unable to start Bluetooth stack service?

  I have a HP Pavilion DM4 1100sa, p/n: XE139EAR #ABU, a serial no: CNU1220Z75. I bought it about 2 weeks ago. Shortly after he stopped hibernating when I closed the lid and the fingerprint reader was also very intermittent, also error message unable to start Bluetooth stack service popped up after the computer has been rebooted and after startup of Internet Explorer... My own attempts to remedy that does not so I called your 0844 3690369 number and possibly your man said that the only option was to do a complete restore of the system. For this I made and then reinstalled my commercial software such as M/S Office 2010, Adobe Photoshop elements 9 etc.

  The error (see above) again reappeared and the fingerprint reader was still intermittent, also my Bluetooth mouse is not connected. Yet once, my own attempts to cure these problems have failed, including playback of your pages in the forum, so I phoned again, everything seems to be resolved but the initial problems and the subsequent, reappears.

  So I made an another System Recovery on Thursday, July 26, 2012. I did a full defragmentation and wiped the free space on the hard drive. This time, the only problem that occurs is the error message failed to start Bluetooth stack service. Yet once it appears only after a computer reboot and start Internet Explorer.

  I am very reluctant to spend another hour, or so, on the phone so I want your best and hopefully correct advice on how to avoid this very annoying message from popping up.

  Mike

  We will uninstall the system Broadcom bluetooth driver and that's it.

  We will not install another driver for this device instead.

• start / stop NFC programmatically

  I am able to start / stop Bluetooth of cascades

  Is there a way to start and stop the NFC by programming?

  It has enabled for a business application in the perimeter of work where the NFC should automatically /disabled.

  THX

  Rodger,

  Thanks again. It works well - even in the scope of work

  Integrate this way:

  At STARTUP after UI is created from a QTimer delayed in QML, I call checkNfcState:

  void ApplicationUI::checkNfcState()
  {
      mPpsObject = new bb::PpsObject("/pps/services/unifiedradiomgr/status?wait,delta", this);
  
      bool res = connect(mPpsObject, SIGNAL(readyRead()), this, SLOT(onPpsReadyRead()));
      Q_ASSERT(res);
      Q_UNUSED(res);
      if (!mPpsObject->open(bb::PpsOpenMode::Subscribe)) {
          qWarning() << "E K K E  Could not connect to Radio object: " << mPpsObject->errorString();
      }
  }
  

  and here's the SLOT:

  void ApplicationUI::onPpsReadyRead()
  {
      bool readOk;
      QByteArray data = mPpsObject->read(&readOk);
      if (!readOk) {
          qDebug() << "N F C  !readOk";
          return;
      }
      bool decodeOk;
      const QVariantMap map = bb::PpsObject::decode(data, &decodeOk);
      if (!decodeOk) {
          qDebug() << "N F C  !decodeOk";
          return;
      }
      const QVariantMap ppsFile = map["@status"].toMap();
      if (ppsFile.isEmpty()) {
          qDebug() << "N F C  !ppsFile.isEmpty";
          return;
      }
  
      QString state;
      state = "nfc";
      if (ppsFile.contains(state)) {
          QString nfcValue = ppsFile[state].toMap()["state"].toString();
          qDebug() << "N F C   current   STATE: " << nfcValue;
          if(nfcValue == "OFF") {
              emit nfcOff();
          }
          disconnect(mPpsObject, SIGNAL(readyRead()), this, SLOT(onPpsReadyRead()));
          mPpsObject->deleteLater();
      }
      return;
  }
  

  As soon as I get a State NFC I disconnect subscription because there is already an NFC events bps events loop, where I'll be notified if NFC pass in review status:

  void ApplicationUI::handleNfcEvent(bps_event_t *event)
  {
      uint16_t code = bps_event_get_code(event);
      nfc_event_t *nfcEvent;
      nfc_target_t* target = NULL;
      nfc_result_t rc;
      uchar_t id[20];
      size_t idLength = 0;
  
      switch (code) {
          case NFC_TAG_READWRITE_EVENT:
              ....
              break;
          case NFC_SNEP_CONNECTION_EVENT: {
              ....
              break;
          case NFC_NDEF_PUSH_SUCCEED_EVENT: {
              ...
              break;
          case NFC_NDEF_PUSH_FAILURE_MSG_OVER_SIZE_EVENT: {
              ...
              break;
          case NFC_NDEF_PUSH_FAILURE_REJECTED_EVENT: {
              ...
              break;
          case NFC_NDEF_PUSH_FAILURE_IO_ERROR_EVENT: {
              ...
              break;
          case NFC_ON_EVENT:
              ...
              break;
          case NFC_OFF_EVENT:
              ...
              emit nfcOff();
              break;
          default:
              ...
              break;
      }
  
      // don't forget to delete the target
      if (target != NULL) {
          nfc_destroy_target(target);
      }
  }
  

  It works fine now.

  As yet I had no information if there is a way to start the NFC programmatically open settings NFC detection NFC OFF if:

  void ApplicationUI::nfcSystemSettings()
  {
      InvokeRequest cardRequest;
      cardRequest.setUri("settings://nfc");
      cardRequest.setMimeType("settings/view");
      cardRequest.setAction("bb.action.OPEN");
      cardRequest.setTarget("sys.settings.card");
      mInvokeManager->invoke(cardRequest);
  }
  

• CSA used to prevent the stopping of services

  I want the APF to prevent stopping the services of a person who is remotely connected to a windows pc (for example via telnet, vnc or remote desktop). Means: The user should not be able stop / start / restart all servive (e. g. customer or ciscoworks daemon manager dns).

  Can someone me a Commission gibe what type of rule should I use to achieve this goal?

  Thank you

  Edgar

  CSA has only provisions for the control of the agent service and CSA 4.5 seems no different.

  If you use Active Directory look at this link - http://www.winnetmag.com/Article/ArticleID/44684/44684.html

  With a small modification to the procedure described in the article, you can craft a group policy to control the power of any service function.

• Start & stop an instance RAC

  Hello

  I just created a 2 node 11 GR 2 database RAC, traditionally from databases not CARS I would just use sqlplus to start / stop the instance

  Q1. What is the recommended way to start / stop an instance in a RAC environment? Do you use a cluster to do command, or is sqlplus is acceptable?

  Q2. If you use sqlplus and more to stop an instance on a node, I presume that the cluster services is NOT as a failure and so don't try to restart the instance?

  Q3. similiarly what is the best way to start / stop a listener on a particular node?

  any help appreciated

  Jim

  Hello Jim,

  Q1. What is the problem with the status not reflected in the output of clusterware resource? Is it to do with the ability of Services to acknowledge a failure and restart the CLuster service?

  Response: The resource database is not parsed by SIR and if the database suddenly stops then none will try to restart the same.

  Q2. Regarding the automatic closing of a database in a CCR environment (as opposed to the manual method which I asked on-) if I simply turn off the cluster nodes of my will which in turn stops the Instances and close the database RAC itself (when the last Instance is closed)?

  For even if I turn on my knots, the first node start cluster, its instance and open the database?

  Answer: well, if you turn off your server then of course the database and stop anything else running on the server. When the server is under tension and if crs autostart is enabled then the clusterware stack will come with the server

  Q3. What is the difference between a Service and a resource of the cluster? Are the database, earphone etc services or resources? I'm just trying to understand why SVRCTL is used to manipulate the database and listener and not say CRSCTL?

  Answer: You can configure a service which is part of tree resources of database and the resource database is a parent for the same thing. Services are used to connect to the database. Database, (if added) services, asm, listener, scan etc are all the resources of the clusterware, which are monitored by the clusterware.

  You can refer to the Oracle documentation, which will give you more insight on these details

  http://docs.Oracle.com/CD/E11882_01/RAC.112/e16794/TOC.htm

  http://docs.Oracle.com/CD/E11882_01/RAC.112/e16795/TOC.htm

  Kind regards

  Vautrin - Oracle

• 11 GR 2 Grid Infrastructure manual start/stop in clustered environment

  Hello

  I have installation 11 GR 2 grid in both a stand-alone environment and a cluster environment and I am looking at some differences regarding post-market manually in these two environments

  In the stand-alone environment, manually stop really just composed of-

  ASM - stop I would use generally "srvctl stop asm ' to do

  Stopping HAS (Oracle Restart) - using "crsctl stop at".

  Would be just the reverse of these

  However things in the clustered environment seem to be a whole different kettle of fish!

  First of all I appreciate this start manual switch of ASM and Cluster resource (in stand-alone environments and Clustered) is not really essential for the operation on the day the day (it's really for food issues) and a server startup or stop will do the necessary start / stop services - so somehow this manual process is a bit contrived for the race on the day the day

  Q1. Given that there are so many different levels of process / demons for the clustered environment - is there still a viable manual start for 11 GR 2 GI procedure in a clustered environment?

  Any help in identifying the manual order to start / stop would be appreciated?

  Thank you

  Jim

  Hello

  You can stop/start the cluster and all resources with "crsctl stop/start crs. There is no need to manually stop the asm, it will be managed by clusterware, as well as the dbs, auditors, etc.

  You can use "crsctl stat res t ' for an overview of the resources managed by the crs.

  "crsctl stat res ora.your_dbname.db Pei" gives you detailed information about the resource, including the start and stop option. Regularly, this should be the immediate mode for the dbs, if you're fine with this mode of closure you can simply use crsctl stop crs to stop everything on a single node.

  Concerning

  Thomas

• How to start/stop/restart tools in CentOS

  Hello

  So I have VMware tools installed in Centos.  I know that it starts by itself.  How can I start/stop/restart manually it?  I looked in /etc/rc.d/init.d and I can't seem to find the script.

  Thank you!

  Eric

  Try:

  /etc/vmware-tools/services.sh restart
  

• The VMware Workstation Server service stopped with service specific error %-1.

  Hi, when I try to enable sharing in Workstation 8 GTR | Change | Preferences | Sharing virtual machines, I get an error Impossible to configure the workstation server. Check the event log, I found they were trying to start the VMware Workstation Server service that does not start (even when you try to start it manually) and the following error is recorded "the VMware Workstation Server service stopped with service specific error %-1." by the Service Control Manager. I found no additional cases related.

  Running on Windows 7 SP1 x 64. The port is set to 7443.

  I also tried to find a newspaper there instead of vmware, but neither found anything related; However I could have missed something.

  Thanks for all the ideas, what could be wrong and how to fix it.

  Hello

  I have Workstation 8.0.1 installed on two laptop computers each running Windows 7 SP1 x 64... the shared component of the virtual machine runs on one but not the other. On the machine that I have problems with I uninstalled Workstation and reinstalled - without success. What I ended up doing to replace the datastores.xml file in the Directory go (C:\Documents and Settings\All Users\Application Data\VMware\hostd) on the laptop with the problem with the file datastores.xml of the laptop that works - success! I knew that there was a problem with the file because I've been poking around and noticed that the datastores.xml file is not open for editing - it was corrupted.

  I have attached the file to this message.

  Change of the section at the location that you store your shared VM (be sure to not use a UNC, which breaks the service as well!).

  I hope this helps.

  Steve

• How to start, stop and restart the task

  Hi all
  Need advice on what is the right way to start, stop, and restart a Java task?
  
  I tried with Executors.newCachedThreadPool () or fixedThreadPool(), however I could not present the task once. My program crashed when I tried again the task again after a shutdownnow command()

  Tasks are designed to be run once. If you want to restart features, use a service:
  http://docs.Oracle.com/JavaFX/2/API/JavaFX/concurrent/service.html

  Service I posted in the following thread shows how to proceed:
  Multithreading

  Use of executors is unnecessary because a Service encapsulates the management of execution threads (although you can set your own liquidator on the service if you really need). Everything you need to do is use the start of the service, cancel, restart, and reset if necessary. If you do not use the cancel method, then you must ensure that your service is properly interrupt the current to cancel it for function, as you expect.