access denied to users

Similar Questions

• access denied for user access to/users/weblogic/_portal/dashboard of path

  Hello world
  
  I installed 11.1.1.6 OBIEE. Until yesterday, everything worked well. But today, I made a new RPD and restarted BI services.
  
  Then after that when I open MonTableauDeBord it is throwing the following error
  
  "access denied for user/users/weblogic/_portal/dashboard path available.
  
  One faced this question earlier? Please give me some suggestions to overcome this problem.
  
  Thanks in advance.

  If possible, remove the weblogic and weblogic.atr folder and restart the BI services

  Either using Catalog Manager, change the permissions

  Published by: svee on July 31, 2012 11:28

• Access denied for user path in 11g

  Hello
  
  I deleted and recreate a user, when I login and goto my dashboard it shows error below.
  
  access denied for user access to/users/kavitha/_portal/dashboard of path.
  Error codes: O9XNZMXB
  
  Thank you
  Kouadio.

  Kouadio,
  Find the sub folder

  That is to say, drive installed: \Oracle\Middleware\instances\instance2\bifoundation\OracleBIPresentationServicesComponent\coreapplication_obips1\catalog\YourCatalog\root\users

  1 delete the problemcs folder and of
  2. restart the BI services
  3. sign in with the user.

  Thank you
  Oldia...

• Access denied for user access path...

  I created the new filter by copying an existing and making some changes. I created this as an Admin user. However, when connect as a tester, I get the error "access denied for user to the path... /.. '. /.. "/ New filter.
  
  I think I might have to grant the privilege to this user to the filter. But I am not able to know how I can do.
  
  Help, please.
  
  Thank you.

  give access to shared folders were the filter is stored in the user, because the common filters were stored there only.

  Thank you
  Vino

• Access denied to user@localhost using the Yes password

  Hello world
  
  I try VERY hard to connect to my database
  I use dwcs3 and wamp phpmyadmin
  
  I get the...
  Access denied to user@localhost using the Yes password
  
  and even if I use the password only
  
  Now I'm using the username and password I chose when I created my database and user in cpanel, but it does not work so I go to phpmyadmin and I look at the homepage and it is said that
  Server = localhost
  user = mysitename@localhost
  and no information about a password
  
  SO what username and password choose I chose one that in phpmyadmin?
  
  So I try to make a connection using the info from phpmyadmin and... nothing same message access denied for mysitename@localhost
  using the password and password yes no
  
  Someone at - he had ideas why I use the exact user name and the password I chose, I know that my host automatiocally put a prefix in front of the name username and the database, so I use the same prefix and still nothing...
  
  Any help would be great
  
  Good day
  
  
  
  Mark this message as a response.

  The user name should not be 'mysitename@localhost', it should just be "mysitename".

  Now, here's the thing. In CPanel, there are 3 steps you need to take to get the connection of database for a user. The first step is to create the database. The second is to create the user (unless already created). The third step is to allow the user to access the database. There should be a box down from the window of CPanel (given that the theme of your host has not radically changed the provision) that says "add user to database". If the user does not have access to the database fails.

  Try and see if it helps. If you have already done this just after again.

• EXEC System ERROR 1045 (28000): access denied for user 'ODBC'@'localhost' (password: NO)

  I am dynamically creating a MySQL database from a SQL script file, when I call the Exec VI system I get the above error

  my order entry looks like this:

  "C:\Program Files\MySQL\MySQL Server 5.5\bin\mysql.exe"

  my standard input entry looks like this:

  "- defaults-file = C:\ProgramData\MySQL\MySQL Server 5.5\my.ini"uroot -""-Ppassword.<>

  If I paste the entire command in a CMD window, it works very well, my db is created (all quotes are included)

  If I try to convey the just the input of the command mysql simply view help info - no error.

  someone has an idea how I can get this working?, oh I'm using LabVIEW 2011 SP1

  TIA

  Hi DogOnWood,

  LabVIEW inserts the default escape characters in string constants.  This can be change your chain one waited one way when it goes off at the command prompt.  Try right-clicking on the string constants that you are entered into the system Exec VI and turn it on '-' option to display Codes on the shortcut menu.  Look carefully at how the escape codes are used to ensure that the correct channel is sent to the command prompt.

  When you use options as a result of a call to an exe file, a common method that works for people is to create a batch file with the file name and the options specified on the inside.  You can then call the file of commands directly from the system Exec VI.  This is described in the system Exec VI Help file:

  «To run an executable with options by using the syntax filename.exe - option1-option2, create a fichier.bat that calls the executable with the syntax of options and use this VI to call the fichier.bat.»

  In this case, you can programmatically create a batch file using the writing of text file VI first with your orders and then use system Exec to run the file:

  Write to help the text file - http://zone.ni.com/reference/en-XX/help/371361H-01/glang/write_characters_to_file/

  Ideally, we recommend the Database Connectivity toolkit for LabVIEW use to connect to databases, as he takes care of all that for you.  You can find more information on it here:

  Database connectivity - Kit http://sine.ni.com/nips/cds/view/p/lang/en/nid/209060

  Kind regards

• "An error occurred during the application of the security information to G:\ Trash' access denied.

  original title: Lost Forever?

  After you change the permissions for an external hard drive, I was unable to open the files on this disc. Then I tried to reverse what I did and when I choose apply I get the message error "an error occurred during the application of the security information to G:\. Trash' access denied. the user, I'm changing the permissions is "creator/owner.

  If you choose to continue you get the same error message with different location after g:. If you click Cancel the message is ' stop the spread of the permissionsettings leads to a contradiction of State in which some objectshave settings but others not. " If you have made the change by mistake, you must apply the correct change immediately. to achieve a consistent state. I don't know what I did wrong. do not remember because she has been veterinary disabled brain damaged. Thank you!

  Hello

  You must take ownership of files and folders. Do follow link below:

  Troubleshoot "access denied" when opening files or folders

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

• Error Warning: mysql_pconnect() [function. MySQL-pconnect]: access denied

  Hi all

  I am creating a website in Adobe Dreamweaver CS6. I am trying to add a page with a membership form that fields of entries in a database.

  I have set up a local test server (using xampp) that worked. That is to say the form accepts the data and passes through to the database.

  However, when I put the form and files to the remote server and try to access the page of form input (www.friendsofchopin.org.au/mem_form.php), I get the following error:

  Warning : mysql_pconnect() [Function.MySQL - pconnect]: access denied for user 'chopinau_admin'@'localhost' (using password: YES) in /home/chopinau/public_html/Connections/memconn.php on line 9
  
  Fatal error: access denied for user 'chopinau_admin'@'localhost' (using password: YES) in /home/chopinau/public_html/Connections/memconn.php on line 9

  memconn.php script is the following:

  <? PHP

  # FileName = "Connection_php_mysql.htm"

  # Type = 'MYSQL '.

  # HTTP = 'true '.

  $hostname_memconn = "localhost";

  $database_memconn = "chopinau_membership";

  $username_memconn = "chopinau_admin";

  $password_memconn = "xxxxxxxxxxxx";

  $memconn = mysql_pconnect ($hostname_memconn, $username_memconn, $password_memconn) or trigger_error (mysql_error (), E_USER_ERROR);

  ? >

  
  

  Grateful for any help in changing the code (total nube), also have a doc with screenshots and details of what I do in Dreamweaver and in my cPanel.

  See you soon,.

  Ben

  DonaldConnan wrote:

  Hi Preran

  I have the same problem. It works fine when I use it on my test in Dreamveawer CC (preview/debug in browser) machine, but as soon as I test it on the Web server, it gives the error. I use the same host, user and password.

  Concerning

  Donald

  Your remote connection may be different from your local connection.

  Did you check with your host that what connection you should use?

  'localhost' in the connection string might be just your domain name - "yourdomain.com".

  $connect=mysql_pconnect("localhost","root","password")or die("error in user");

• 'Access denied' in ASA - registry permssion issue?

  Hi all
  
  We use version 9.3.1.
  All of the client machines are extremely locked in this environment and users have minimum rights.
  For example, they do not have access to the Control Panel, can not install software such as Winzip, etc., due to the strict policy of the company.
  Some users require that the console of ASA and the Financial Reporting Studio installed on their machines.
  The console and the studio were installed successfully by an administrator and the admin user can connect to both.
  However, when users log on to the PC and open the console of the AAS or studio EN they get an error "access denied". Users do not have access to Event Viewer, so I can not give more im afraid.
  I think that this error is caused by the fact that Hyperion tries to write to the user doesn't have access to a registry key.
  By default users have write access to HKEY_CURRENT_USER but do not have write access to the HKEY_LOCAL_MACHINE key.
  
  Now if I remember correctly one of the conditions is to have write access to the registry HKEY_LOCAL_MACHINE\Software\Hyperion Solutions key.
  I would like confirmation that this is the case. I had a look at the doc guides and admin install without success.
  
  I guess it's a registry problem since if I connect to a PC problem, I can open two heavy customers. The only difference between the profiles of users and mine, is that I have some admin rights on my roaming profile.
  
  Thanks for your help.
  SEB

  Hi Seb,

  I suspect it is a registry permissions problem.
  Service console Regional access lots of keys, in terms of updating and creation of key here is a few examples.

  Create the key > HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\DirectDraw\MostRecentApplication
  Set value > HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\DirectDraw\MostRecentApplication\Name
  Set value > HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\DirectDraw\MostRecentApplication\ID

  Create the key > HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
  Create the key > HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\Tcpip\Parameters

  Set value > HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Cryptography\RNG\Seed

  A good test would download something like regmon, starts on a computer that receives questions and then start the console of Regional service, you should be able to see all of the attempts failed at the registry.

  I expect that Financial Reporting Studio written also in a number of keys as well.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• In XP, the C:\Documents and Settings\All Users\Menu Menu access denied error

  Windows is comeing up C:\Documents and Settings\All Users\Menu Menu access is denied

  How can I solve this problem

  Hi Tony,.

  a. is the narrow question in the folder of the Start Menu ?

  b. you are the administrator of the computer?

  Check to see if this article helps you.

  "Access denied" error message when you try to open a folder

• XP corrupted user profile. Copy the files to the new profile. Access denied

  I have been using my administrator as the profile of my work profile. Recently, my profile became corrupted and I implemented a new Administrator profile. However I'm unable to access my old files or e-mails in outlook.

  The instructions I found explain how to copy a profile to another user when logged in as an administrator of third. I followed these instructions, but when I try to highlight the files in my old (corrupt) profile I get the access denied error message. He also told me that the folder is empty when I know that it is not. I get the result even if I try to do it from any administrator account. Help!

  Hi kevjmc,

  1. you receive the error message with all files and folders?

  I suggest that you start the computer in safe mode and try to copy or move files and folders check if it works.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Start getting error - 'load - User\Name\Appdata\Roaming\iasnapw.dll - access denied error.

  From the start of my PC (with windows Vista), I always get a message: "load - User\Name\Appdata\Roaming\iasnapw.dll - access denied error" in any case I can still use my PC normally. What does this message and how to resolve this error.

  Thank you
  A. Wahyan

  Hello

  Google who provides virtually no information that suggests it might be the malicious program or a start remains for her entry search

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If the error persists after scanning use this program to out startup

  This utility, Autoruns for Windows, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• Error message at startup: error loading: \App Data\Roaming\pxma2.dll C\Users\ (my name). Access denied

  Hello activity (yet) on Vista 32 bit, I receive a message (at the start). Error loading: \App Data\Roaming\pxma2.dll C\Users\ (my name). Access denied. Please notify.

  Hello

  Cannot find this file on Google so you probably dodged some software malware and you should do a
  very thorough control. Message on how to remove the error message if still it y
  After the audits of malware.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often
  easy to detect malicious software often comes with a much harder to detect and remove the
  payload. So its best to be now too thorough than paying the high price later. Check
  with an extreme overdose point and then run the cleaning only when you are very
  that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap you start, however, you should
  also run in regular Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with the other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here or
  Use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing system
  files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK your way out then
  turn it back on.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

• Access denied to back up user files

  Recently I reformatted and reinstalled Vista and used nti backup 4.7 to save my user files. When I used nti put the files back, he went with success, until I tried to open the files, when I get an error 'access denied '. I had a password to the user until I reformatted, would that be the cause of the problem?

  Jason

  Hi Jason,

  Have you tried to take ownership of files as described in method 3 in my previous post?

  Check if you can access the files in safe mode, start the computer in safe mode. To do this, follow the steps below:

  Access Advanced Startup menu options by turning on your computer and pressing the button F8 continuously until Windows starts. In the advanced startup options select Safe Mode

  Startup options (including safe mode)

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• NVCPL. DLL access denied on one of my user accounts

  I have three user accounts on my computer.  One is my main use, on a daily basis, account, one is the admin account and the other is a guest account.  I use administrator accounts and invited normally but when I try to access my main account screen goes black and I get "NVCPL. DLL Access Denied"as an error message.  I used the admin profile system restore with no luck.   Any suggestions?

  Hi Chris,

  I suggest to perform a clean boot to see if some startup programs may be cause of a conflict:

  http://support.Microsoft.com/kb/929135

  Are you using global policies or the Parental control on this machine?

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.