Access RAID failure

Similar Questions

• HP ENVY Ultrabook 4-1130us - how to access Raid management screen?

  I previously removed the 32 GB SSD RAID so that I could use a SSD 128 GB for the operating system, now that I don't have the 128 GB, I want to go back to the 32 GB and activate intel SRT... Unfortunately, I can't seem to be able to access the screen of the raid controller... There is no prompt to press Ctrl + I like it used to be...

  How do I re-solve-the raid on my SSD?

  Corrected a problem... apparently so that windows 8.1 controller is unable to properly interact with it.

  To fix: install windows 8... RAID configuration, then with her still active, install windows 8.1

• XPS9100 disk RAID failure

  One of the drives of 500 GB SATA 150 7200 RPM RAID is dead.   When starting, I get a message "ARRAY0" degraded and takes forever to start up.   Using the configuration of F2 at startup option SATA2 is not detected and SATA3 shows a hard drive.   I guess that SATA2 is the defective drive and HDD1 in the chassis.   What is the procedure to replace the drive with a new drive?

  What type of RAID?  If you have a table striped, RAID 0, you must save any data you want to stay on an external, remove the RAID (assuming you want to keep the player which is ok), replace the defective disk, create a new RAID 0 and perform a manual of your operating system and all applications that you want to use.

  If the RAID is RAID 1, a mirror, you can recover by replacing the disc which is a failure and the RAID ROM will rebuild the table using the right disk.

  If you need additional help, please reply.

• Windows 7 Pro - RAID failure - now Windows thinks it is not a true copy

  We have a server with an array of hardware RAID 1 that failed and when replaced by a new drive it regenerated all our data to the new disk exactly as a hardware RAID controller is supposed to do.

  The problem is that the new drive was another manufacturer than the failed drive and since then Windows 7 says that he don't think that it is a true copy.

  E-mail repeated at Microsoft have come to nothing, but the total frustration and they are not answering telephone calls. I ran Belarc security scan that says that we are now 69 updates behind at least a dozen that are important or essential.

  We have a genuine copy of Windows 7 (sorry I'm not post our product key!), and the ONLY thing not original is the 500 GB drive which replaced the defective drive.

  Any advice on the appropriate next steps on how to recover our secondary server in the good graces of Microsoft and all updates applied which IMMENSELY appreciated.

  (The ONLY thing I've seen so far are different sites offering generators of keys which I am not interested)

  Thank you
  Lyle Lee
  Capilano Rock & Gem
  North Vancouver, BC Canada
  www.capilanorock.ca

  This may simply be caused by a bad set of drivers of technology Intel Rapid Storage Technology-

  Intel rapid storage driver installation

  try to download and install them from here - https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=2101&DwnldID=22194

  (you want the download of iata_enu.exe)

  Once complete, please restart twice, then after another MGADiag report.

• ESX server 3i 3.5.0 raid failure

  Hi all

  I guess this has been asked before, but I see nothing that quite matches the point, that I am now.

  I was running from ESX willingly until this week, it seems that undergo a 3 discs on a Bay raid 5 3 everything all at the same time, I managed. The system would start and run for a while but would eventually fall. I copied all the data store of data through the client Infrastructure to a Workstation window, I'm not sure how to back these virtual machines on and running to a new installation of ESX, as it seems that when the copy of the files have been renamed? It seems not as simple as the copy of the stuff in the new data store.

  Concerning

  You can do it the same way that you have downloaded the files. Open the browser of data store, create a new folder with the name of the virtual machine and download the files in this folder. Once downloaded, right-click on the vmx file and select Add to the inventory.

  André

• SSDS must be similar in size and type to raid 0?

  SSDS must be similar in size and type to raid 0?  I have a 2009 MBP 2.66 bicoeur.  SSDS are an old sata 250 GB Samsung 850 pro III and an all new Intel 160 GB (320 series) sata II.  The hard drive on the MBP interface is 3.0 GB/s sata optical drive interface is 3.0 Gbit/s

  Different size, different brand, sata II issue III v?

  If it works, it will be almost double the read and write rates, I understand.  I am aware of the increased risk of data loss.  Will only use for backup data.

  How is it difficult to set up raid 0?  I don't know the first thing about raid 0, 1, 2, 3?

  Thank you

  Stu

  If it works, it will be almost double the read and write rates, I understand.

  RAID offers for the SECOND and the following read/write of the same LARGE file acceleration and not otherwise. Any intervention of reading or writing in different files eliminates the acceleration. Any acceleration is much more dramatic on rotating discs, because it can eliminate some of the 10 ms or more long 'dead time' while the reader is a new track and the controller must wait for the correct data go in the position under the read/write head. Acceleration on the low-latency SSDS is far less dramatic.

  The system drive / boot is particularly bad choice for a RAID, it reads and writes small random files in all directions. Who will get no acceleration.

  You can best be served by creating a workflow that allows separate readers for the source files to Destination files, files of zero and drive system / boot.

  --------

  RAID is usually done on the disks that are exactly or nearly the same. Too slow response of one of the discs can cause the RAID failure.

  RAID support has been removed the disc utility GUI in 10.11 ElCapitan, probably because too many casual users got into trouble with the built-in GUI functions. You need to use the diskutil command in the Terminal, or buy the SoftRAID(4) package.

• want to BSOD 4 t-1000 - iaStor

  Want to 4 t - 1000, 13 months (& 1 month out of warranty!).

  Matrices with BSOD after a few minutes of work - always fails iaStor.sys.

  1. I realized that the battery has an internal short circuit - so I removed for now.

  2. Ran - hard drive, memory, (same battery) system diagnostics all returned success in all tests.

  3 Ran spinrite disk - 100% ok.

  4. originally couldn't make it past the windows startup screen before you die - so I couldn't update drivers etc. (safe mode failed too)

  5. I ordered of new recovery disc reinstall because initially it would not get before the windows splash screen before dying.

  6 recovery disks not every time (6 times).  I tried all of the suggestions that I could find. -wouldn't boot correctly after the installation of the software.

  7 bootdisk opportunity for kaspersky rescue disk - ran fine - no viruses - has not crashed.

  8. following suggestions internet - installed win 7 Home premium ISO downloaded from digitalriver.

  9. this installation required (iaStor) rapid storage drivers intel HP at the start before he would find by car - but it installed great.

  10. had fresh windows install to run great for 1 hour.

  11 opportunity USB stick to copy the drivers to the latest hp on the support site for networking, usb, graphics, etc...

  12. the thought that I had won - then it BSOD with iaStor.sys failure once again.

  13. now it starts but dies within 5 minutes.

  There must be a driver issue!  Perhaps an inconpatibility with an update of windows.

  It's a $1000 {content removed} now, it's just a year.  What gives?  There must be someone out there who has corrected this.  I see other posts on the same problem, but I still have to find a solution.

  Please, can someone help me?

  Update...

  After many many attempts and Michio, I got the laptop working again.

  (1) I tried to install kubuntu - live version worked, but I could not install.  Decided it was function of WSSD cache drive and funky path that intel 'rapid storage technology' is used to cache the OS for the ssd of 32 GB.

  (2) found this site Directions to reformat desire Sleekbook

  (3) these indications had me remove the SSD cache drive and restart to access RAID Configuration Manager.  Disable the RAID for the main drive. -The illusory Configuration RAID Manager appeared, and I chose to remove the disc from the configuration.

  (4) the next step is to replace the drive ssd and restart - get Configuration RAID Manager again.  HOWEVER, the RAID Configuration Manager never run - never to be seen or found again

  (5) now the urge finally lost all memory of the previous windows install (at the start is more said that windows can not start more she said even after I formatted the drive).  I saw this as a step forward.  HOWEVER, now he would no longer see the USB ports and I could not boot to a USB - DVD player.  The laptop was dead.

  (6) after several reboot attempts and a time-out from time to cool, I tried again and was either lucky or he had something to with the fact that I was pressing the four corner keys (ctrl, delete, esc, rt-arrow) at the same time (probably lucky).  Anyway, he finally saw the USB-DVD player and I was able to install the version Home premium windows that I downloaded from digitalriver (not the hp recovery cd).  Then I installed only the drivers HP minimum, that I could get away with - network, audio, usb, card reader.    The laptop has been running nonstop for more than a day without any problem.  First time in a month that he doesn't have a BSOD in the 30 minutes of running.

  (7) the only negative - I think that Intel Rapid Storage and SSD Cache are no longer works.  Don't know if this means that the SSD Cache was my problem all along, or if it was the RAID controller which also seems to be out of the picture.  Anyway, the laptop works again.

  I don't know if I recommend you to everyone they are trying the steps that my work, but for the last month, I was assuming that I would have to throw this laptop and now I have a working laptop again!

  Two or three observations:

  -Why is the Manager of Configuration RAID hidden and inaccessible?

  -Why the system diagnostics are not unaware of the SSD drive?

  -Why is the disc SSD Cache affects negativily recovery and retry installation?

  -Why is the case of jealousy so flexible that the laptop with one hand in place picking shorts the battery?

  -Why HP pay $100 for a bag of screws to replace the two screws that are missing in my case?

  -Why would I by an another HP laptop again?

• Sync lost my favorites

  Hello. I got a system down yesterday, a raid failure (a hard drive died of a raid 0 array), I reinstalled Windows 7 x 64, to a new hard disk (normal, not in raid or something like that). I installed Firefox 18 and I set up the sync account. Then I tried to synchronize my computer with the server after 10 minutes or something, when I came back to the computer, I checked the bookmarks. And surprise... some sections have been lost after a 2nd synchronize, all my favorites were lost and not found. Also on the server there are no bookmarks on the left, even if the passwords work always and all in perfect condition. So what to do now?

  Problems with bookmarks and history does not properly can be caused by a corrupted database places.sqlite file.

  You can check for problems with the database places.sqlite file in the Firefox profile folder.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file

  You can try to restore the bookmarks from a recent backup of JSON in the bookmarkbackups folder.

  • http://KB.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

• Move the RAID5 array to another server

  Had a RAID failure on an old PE2850. looked like two disks of default at the same time, which makes me suspect the PERC, not drives - especially because I moved the disks as a unit to another PE2850 and was able to mount it as a second table RAID (the new server OS on disk RAID1 disks 0 and 1, this table 2-5) and he acknowledged the table.

  However, I can't mount a Windows partition.  I start the operating system on the new server and Disk Manager recognizes there is a drive, but I can't use it unless I format it, who will become the object of all the activity, which is at this stage to draw sort of useful data in the coast of the Bay.

  Anyone can suggest a way to get this recognized by a new server table or card PERC or something?

  You would be able to connect to a PERC 4 controller, otherwise it will not recognize the VD.

  You could try editing under linux... sometimes that has a better tolerance (or the less different) for corrupted partitions/file systems. If the table of partition/filesystem is corrupted, you can also try the tools to try to fix it. If the damage is superficial, as they often work.

  You said that you had two disks fail... describe how you got the table online. It is important and can determine whether or not the other attempts to retrieve data are futile.

• Clientless Webvpn with Citrix traffic filtering

  Hello

  I use an ASA 8.2.2 configured with webvpn without client.

  Since there are several different groups of users, and connection profiles configured, I want to make sure that only certain users have access to certain services. That as I have it configured webtype ACL. It works very well for an associated http or https traffic to the internal server, but it does not work for traffic to the Web interface for citrix citrix server.

  That's how part of my config is looking like:

  ...

  Group Policy X attributes
  VPN-tunnel-Protocol webvpn
  group-lock value X
  WebVPN
  filter value X

  ....

  access-list X webtype allow url http://x.y/* default log
  ...

  Citrix group policy attributes

  VPN-tunnel-Protocol webvpn
  group-lock value Citrix

  WebVPN
  value of filter Citrix

  ...

  access Citrix webtype list allow url https://citrix.local/* default log
  WebType Citrix Access-list allowed citrix url: / / * default log
  WebType Citrix Access-list allowed Citrix url: / / * default log
  access Citrix webtype list allow url https://citrix/* default log
  access Citrix webtype list allow url http://10.1.2.3/* default log
  access Citrix webtype list allow url https://10.2.3.4/* default log
  access list Citrix webtype allow newspapers http://* of the url default
  access list Citrix webtype allow newspapers https://* of the url default
  access Citrix webtype allowed url list any fault of newspaper

  If I'm troubleshooting using the log, I see only permits and no. denies! Also if I look at the number of accesses. But as soon as the channel of Citrix from the Client to the Citrix in HTTPS server is started, it fails if the webtype acl is active (even with the permit of any url at the end!). If I delete it, it works great!

  rastest # sh Citrix access-li

  access list-Citrix; 9 items
  Citrix access list line 1 webtype allow url https://citrix.local/* log by default (hitcnt = 281)
  Citrix access list line 2 allowed webtype citrix url: / / * open a session by default (hitcnt = 0)
  Citrix access list line 3 permitted webtype Citrix url: / / * open a session by default (hitcnt = 0)
  Citrix access list line 4 webtype allow url https://citrix/* log by default (hitcnt = 0)
  Citrix access list line 5 webtype allow url http://10.1.2.3/* log by default (hitcnt = 0)
  Citrix access list line 6 webtype allow url https://10.2.3.4/* log by default (hitcnt = 0)
  Citrix Online access list 7 webtype allow by default of newspapers http://* in the url (hitcnt = 0)
  Citrix Online access list 8 webtype allow by default of newspapers https://* of the url (hitcnt = 14)
  Citrix access list line 9 webtype allow url no matter what failure to log (hitcnt = 0)

  Any idea, advice?

  Thanks for your help!

  Marco

  Hello

  do you still need help with that? If so, could you please try adding a line to the ACL as follows:

  Citrix webtype permitted tcp access list failure to log

  and see if that makes a difference?

  Herbert

• Windows Server 2003 vmdk / blue screen / VMX missing

  Hello

  We come across a RAID failure that has had a number of machines with it. I'm trying to restore a particular machine that has replicated off-site using MRS. Unfortunately I can't recover the usual way as the Protection status is "not configured" and I can't restore because the connection state is "inaccessible". See below:

  Unable to protect VMS 'FTP' because of the status of the non-copyrightable connection "inaccessible".  The virtual machine must be properly connected before it can be protected.

  This machine has not been saved either. Lessons have been learned.

  So, I have since discovered that the VMDK for this machine is sitting in a folder on a store of data on the side of DR. However, there is no attached vmx file and I tried to recreate the virtual computer by using the standard virtual machine settings, but there bluescreening at startup:

  

  Unfortunately, I'm unable to F8 for CHKDSK but I think it's more to do with a configuration problem on the side of the virtual machine rather than on the side of the BONE. Perhaps because of the machine version (which was 7) and we are now running 8 and higher, the CPU / RAM installation etc? I don't even know if it's an OS 32-bit or 64-bit.

  Is that what I can do to get this working?

  Everything is good!

  He joined a vm 2008 just if I could go down the files. Recreated the vm as 'typical' and handed over in place the VMDK and only, she went and booted up!

  Needless to say I took a snapshot and will get this saved mofo tonight.

  Thanks for the suggestion, if.

• Surveillance equipment (UPS, PowerEdge, etc.) in ESXi 4?

  Hello

  How can I control the host hardware in ESXi 4?

  I need at least RAID failures and UPS power interruptions.

  Perfect would be a solution in a machine virtual who's watching material, sends e-mails and the failure to suspend all virtual machines and stop the host.

  I found numerous threads on UPS, but they are much much.

  I miss the sticky threads or FAQ?

  Greetings

  Carsten

  Sorry through on-the-wire.

  ESXi has no support out-the-box UPS, and you can't really use USB or series.  However, you can add a network card to your Smart UPS and then use APC freely downloadable PowerChute Network Shutdown in a prompt or anywhere else.

  HTH

  http://blog.peacon.co.UK

  Please give points for any helpful answer.

• ESX 3.5 file system?

  Hi... earlier this week, I had a RAID failure, and my whole military machine went down.  I currently work with a data recovery facility to get my VMDK off the disks.  I'm not a VMWare expert, and the recovery people have asked me what kind of ESX 3.5 file system used.  They mentioned XFS... is this correct, or is this something else?  Thanks for your help!

  Right hope, trying to recover the data store that has the vmdk? /

  the data store are VMFS3 format and the BONES of ESX hypervisor type use the ext3 file system as the hypervisor is linux OS.

• Help! Cannot change some files in DW CS5

  I just change these fines for these last two days and I have them reuploaded to the ftp server and had to make a change to one and now they are all grayed out and impossible to edit here is code:

  < ! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""

  " < html xmlns =" http://www.w3.org/1999/xhtml ">

  < head >

  < meta http-equiv = "Content-Type" content = text/html"; charset = utf-8 "/ >"

  <!-InstanceBeginEditable name = "doctitle"-->

  < title > CreditDoneRight.net < / title >

  <! - InstanceEndEditable - >

  <!-InstanceBeginEditable name = "head"->

  <! - InstanceEndEditable - >

  < link href = "creditdoneright.css" rel = "stylesheet" type = "text/css" / > <!-[if IE 5] > "

  < style type = "text/css" >

  / * Place corrections for IE 5 css box model * in this conditional comment * /.

  .twoColFixRtHdr #sidebar1 {width: 220px ;}}

  < / style >

  <! [endif]--> <!-[if IE] >

  < style type = "text/css" >

  / * place patches css for all versions of Internet Explorer in this conditional comment * /.

  .twoColFixRtHdr #sidebar1 {padding-top: 30px ;}}

  .twoColFixRtHdr #mainContent {zoom: 1 ;}}

  / * the owner above zoom gives IE the hasLayout property, avoid several bugs * /.

  < / style >

  <! [endif]-->

  < / head >

  < body class = "twoColFixRtHdr" >

  < div id = "container" >

  < div id = "header" >

  < h1 > < / h1 >

  <!-end #header--> < / div >

  < div id = "sidebar1″" >

  < h1 > < / h1 >

  < h1 > Yes, please contact me! < / h1 >

  < do action = "login/contact.php" method = "post" > "

  < table >

  < b >

  Name < td > < p > < /p > < table >

  < /tr >

  < b >

  < td > < input type = "text" name = "name" / > < table >

  < /tr >

  < b >

  Phone number of < td > < p > < /p > < table >

  < /tr >

  < b >

  < td > < input type = "text" name = "phone" / > < table >

  < /tr >

  < b >

  < P > < /p > < table > < td > email address

  < /tr >

  < b >

  < td > < input type = "text" name = "email" / > < table >

  < /tr >

  < b >

  < td > < p > referred by / Promotion Code < /p > < table >

  < /tr >

  < b >

  < td > < input type = "text" name = "code" / > < table >

  < /tr >

  < b >

  My goal is < table > < td > < p > < /p >

  < /tr >

  < b >

  < td > < label >

  < select name = 'Objectives' id = "Goals" >

  < option selected = "selected" > select a < / option >

  < option value = 'Best credit score A' > best credit score A < / option >

  < option value = "Remove the bankruptcy" > remove bankruptcy < / option >

  < option value = "Remove negative items" > remove negative items < / option >

  < option value = "Deleting of the investigation" > survey deletion < / option >

  < option value = "Line of credit" > acquire credit < / option >

  < option value = "More Than One" > More Than One above < / option >

  < / select >

  < / label > < table >

  < /tr >

  < b >

  < P > < /p > < table > < td > notes

  < /tr >

  < b >

  < td > < textarea name = "note" > < / textarea > < table >

  < /tr >

  < b >

  < td > < p >

  < label >

  < input type = "checkbox" name = "Privacy" id = "Life" / >

  < / label >

  I understand that all the information entered here are kept strictly confidential and WILL NOT shared with anyone. < /p > < table >

  < /tr >

  < b >

  < td colspan = "2" align = "center" > < input type = "submit" value = "submit" / > < table >

  < /tr >

  < /table >

  < p > * < a href = "termsofservice.html" > terms of Service < /a > < /p >

  < p > * < a href = "repsignup.html" > representative Sign Up < /a > < /p >

  " < p > - < a href =" http://www.creditdoneright.NET/login/login.htm "> back office connection < /a > < /p > .

  < / make >

  <!-end # sidebar1″--> < / div >

  < div id = "mainContent" >

  < h1 > < br / >

  < Strong > terms of Service Agreement < facilities > < / h1 >

  < p > < a href = "terms.pdf" > CLICK HERE < /a > to download the terms of Service Agreement. < /p >

  < p > < strong > MCRA, LLC < facilities > < br / >

  Phone number: 419-491-4676 < strong > < / strong > < / p >

  < p > before you sign below to acknowledge the terms and conditions, please take a moment to read the & quot; Consumer credit file rights by virtue of the State and the Federal law & quot; which can be found on our < a href = "#information index.html" > down home page < /a >. < /p >

  < p > by by signing below, I confirm the fact that I agree and understand that I sign and acknowledge that I have received a copy of the file rights under State and federal law consumer credit. < /p >

  < p > I, _________, give authorization to MCRA, LLC to pull all three of my credit reports. It comes from Experian®, Equifax® and TransUnion®. I understand that my credit score only will not be affected by allowing MCRA, LLC to pull my credit reports. I understand that the purpose of my credit being withdrawn is so MCRA, LLC can assess my credit situation and take appropriate measures to help improve my credit situation and my credit notes. I understand that MCRA, LLC communicates with these as three on my account to credit reporting agencies. I give permission to MCRA, LLC to communicate with Experian®, Equifax® and TransUnion® on my account. < /p >

  < p > < strong > < u > TERMS OF SERVICE CONTRACT / < u > < / strong > < strong > < / strong > < / p >

  < p > right credit in conjunction with MCRA will be addressed in this as the company. < /p >

  < p > society will provide credit services to repair/restore for clients to demand and will run ONLY on acceptance of the terms of service included as part of this agreement.  < /p >

  < p > company credit repair/restore service will be carried out expeditiously and in accordance with all federal, State and local laws.  The company will do WITHOUT GUARANTEES and DO WILL in no way make any false or misleading claims to one of its customers and/or referring to agents.  It is very important to understand that the results of all surveys carried out for the client account are the responsibility for training of credit agencies and creditors to the study.  The company will not challenge all credit items that appear to be inaccurate, incomplete, unverifiable or otherwise questionable with all three agencies Equifax, TransUnion, and Experian credit. < /p >

  < p > I understand that previous attempts by myself or other agents acting on my behalf, to conduct a credit repair/restoration program can cause delays with the efforts of society to complete this process.   I also understand that previous attempts may result in the inability of the company to acquire credit reports or other documents necessary to complete this process.  In case the acquisition of credit or of reports or other documents is not possible or otherwise impaired, the company will ask customer / client agent helps in the acquisition and transmission of the requested reports and/or documentation.  Society be held not responsible for service: not performed due to customer or a failure of the agent of the customer to comply with such a request.  It may be necessary sometimes for the customer or the agent of the customer buying a copy or copies of credit reports if the company cannot access reports through no-cost ways.  The company will exhaust every effort to access customer reports free of charge. < /p >

  < p > the company guaranteed advertising is valid only if you meet the following criteria: < /p >

  < ul >

  < li > you, or any person or organization, have not tried previously credit repair. < /li >

  < /ul >

  < ul type = "disc" >

  < li > you, or any person or organization, have not previously attempted deletion of your credit reports credit investigation. < /li >

  < li > you, or any person or organization, have not tried payments of debts for the negative accounts on your credit reports. < /li >

  < li > prior to executing your credit repair program, you must purchase the membership from a company that gives a credit monitoring service for your Experian, TransUnion and Equifax credit reports. < /li >

  < /ul >

  < p > < / p >

  < p > in case the company has difficulty to access the credit report information, they will contact you to facilitate access.  Failure to help or to answer the warranty is announced. < /p >

  < p > please keep in mind that even if you can't qualify for the guarantee, we can always help you make significant progress with your scores and credit reports. < /p >

  < p > the following standard fees for the services of the company.  These fees will apply unless other prior arrangements have been made with the company.   Please note that all costs will be deemed as a refundable deposit until positive results have been achieved, then will be defined as payment in full for services rendered.  < /p >

  < ul type = "disc" >

  < li > inquiry removal package: price for removal of the investigation are the following 1-10 $150, 11-20 surveys $250 surveys, 21 + investigations $350. < /li >

  < li > Premium Pack (best value): incredibly $299.00 (package is refundable if we are unable to gather score in 60 days.) -credit repair includes up to 15 negative points, including surveys being removed out of your report. < /li >

  < li > package Package: only $499.00 - this plan is reserved for those who don't want to pay for each item which is repaired credit and want their cases handled with the highest priority. This plan may be the solution for you if you are trying to meet a deadline or to have excessive negative items or inquiries to your credit report. This plan will pay for all repaired items, regardless of how many are in your report (s).       It also includes removal of investigation package. This fee must be paid in full until the service starts. < /li >

  < /ul >

  < p > < / p >

  < p > the company may offer promotions from third-party providers as a courtesy to its customers or agents of customer.   The clients and/or the client agents must recognize that society cannot and does not attempt to act or speak on behalf of third-party service providers, since the company has no direct affiliation with said service providers other than to offer their services as a courtesy or a promotion.  The clients of the company and/or client never agents will have to participate in third-party services.  No customer or client agent information will be provided by the company's third-party service providers.  Third party services to the customers of the company and/or client agents must be negotiated directly between the customer and/or the customer's agent and the third party provider, without the help of the company.  Society will be held harmless in all circumstances or issues that may arise between the client and the agent of the client and third party service providers. < /p >

  < p > the company service fair and affordable for all it of customers and/or agents of the customer, so take chargebacks very seriously.  Society will exhaust every effort to correct any problems that may lead to a chargeback.  It is very important to understand that the company will continue any chargeback in the extent of the law.  To contact the company about any matter that could lead to a chargeback, the company will be quickly review account and find a fair solution for the customer and the company.  If the company is unable to help the customer or the customer's agent and cannot make improvements on their credit file (s), a full refund will be due to customer / client agent. < /p >

  < p > the company protects customer and client agent confidentiality.  The company will never sell, share, or otherwise distribute all its customer and/or customer agent with third parties information.  All information used by the company to provide services entered secure servers only for the purposes of the acquisition of documents relevant to the completion of the services. < /p >

  < p > < strong > POWER LIMITED ATTORNEY < facilities > < / p >

  < p > I authorize the company to act on my behalf when necessary in order to match only with immediate parts of my credit repair and/or inquiry removal service providers. < /p >

  <p>_______________________________      _________________________________<br />

  Customer Signature date < /p >

  < p > < / p >

  < p > <>ACKNOWLEDGE AND CONVIENNENT in strong TERMS OF SERVICE < facilities > < / p >

  < p > by signing below, I agree to the terms of use described in the regulation of service agreement. < /p >

  < p > < / p >

  <p>______________________________      _________________________________<br />

  Customer Signature date < /p >

  < p > < / p >

  < p > & quot; < strong > < facilities > CANCELLATION NOTICE (please print this part, date, sign and return it if you want to cancel, as noted below): you may cancel this contract, without penalty or obligation, within three days after the date of signature of the contract.  If you cancel, any payment made by you under this agreement is returned within 10 days after the date of receipt by the seller of your cancellation notice.  To cancel this contract, mail or deliver a copy signed and dated this cancellation notice, or other written notice to: < /p >

  < p > MCRA, LLC to ADDRESS not later at midnight of the last eligible day of cancellation. < /p >

  < p > I cancel this operation by the present. < /p >

  < p > Date: _ < /p >

  < P > buyer signature: _ & quot;

  <!-end #mainContent->

  < /p >

  < / div >

  <!-this element of compensation should immediately follow the #mainContent div in order to force the #container div to contain all the child floats--> < br class = 'clearfloat' / >

  < div id = "footer" >

  < p > < img src = "images/footer.jpg" width = "948" height = "35" border = '0' well = "#Map2" / > "

  < map "Map2" id = name = "Map2" >

  " < area shape ="rect"coords ="397,7,534,18"href =" http://www.creditdoneright.NET " "target = "_self" alt ="CreditDoneRight.net" / >

  " < area shape ="rect"coords ="551,6,665,18"href =" http://www.mcraproducts.com "target ="_blank"/ > "

  " < area shape ="rect"coords ="469,18,558,29"href =" http://www.kddezine.com " "target = "_blank" alt ="KDDezine.com" / >

  < / map >

  < /p >

  <!-end #footer--> < / div >

  <!-end #container--> < / div >

  < / body >

  < / html >

  Your model code is incomplete / corrupted.

  That's why you can not change it.

  Try to open your .dwt file in a text editor such as NotePad.  Remove the editable code regions.  Record.  Open in DW.

  You will need to SaveAs model (same name as that used by your child pages).  Add editable regions to match those of your pages in the child.  Record.

  Nancy O.

• How to limit the lines on the union of two sqls

  Hi all
  
  The sql below returns two lines when the column value 3 (VALUE2) has a value other than 0 in the second sql.
  
  I want that the result set to return the second row, when there is a match in the first row.
  
  Thanks for you help,
  Hozy
  
  ---------------------------
  
  with options like
  (
  Select the PROPERTY 'AUDIT_CREATE_ROLE', "CREATE ROLE" VALUE, VALUE2 0 in union double
  Select the PROPERTY 'AUDIT_DROP_ANY_ROLE', 'DROP ANY ROLE' VALUE, 0 VALUE2 to double union
  Select the PROPERTY 'AUDIT_EXECUTE_PROCEDURE', 'PROCEDURE' VALUE, VALUE2 0 in double union
  Select the PROPERTY 'AUDIT_SELECT_ANY_DICTIONARY', "SELECT ANY DICTIONARY" VALUE, 0 union double VALUE2
  Select the PROPERTY 'AUDIT_GRANT_ANY_OBJECT', 'GRANT ANY OBJECT' VALUE, 0 VALUE2 to double union
  Select the PROPERTY 'AUDIT_CREATE_LIBRARY', 'CREATE LIBRARY' VALUE, VALUE2 0 in union double
  Select ' AUDIT_AUD$ ' PROPERTY 'AUD$ ' VALEUR0, VALUE2 to double union
  Select the PROPERTY 'AUDIT_ALTER_ANY_TABLE', 'ALTER ANY TABLE' VALUE, 0 VALUE2 to double union
  Select the PROPERTY 'AUDIT_ALTER_USER', 'ALTER USER' VALUE, VALUE2 0 in union double
  Select the PROPERTY 'AUDIT_CREATE_USER', "CREATE USER" VALUE, VALUE2 0 in union double
  Select the PROPERTY 'AUDIT_CREATE_SESSION', "CREATE SESSION" VALUE, VALUE2 0 in double union
  Select the PROPERTY 'AUDIT_DROP_ANY_PROCEDURE', 'DROP ANY PROCEDURE' VALUE, 0 VALUE2 to double union
  Select the PROPERTY 'AUDIT_DROP_ANY_TABLE', 'DROP ANY TABLE' VALUE, 0 VALUE2 to double union
  Select the PROPERTY 'AUDIT_GRANT_ANY_PRIVILEGE', 'GRANT ANY PRIVILEGE' VALUE, 0 VALUE2 to double union
  Select the PROPERTY 'AUDIT_GRANT_ANY_LIBRARY', 'CREATE ANY LIBRARY' VALUE, 0 double VALUE2
  )
  
  Select the PROPERTY VALUE, value2
  one of the options
  Union
  SELECT "AUDIT_ | REPLACE (audit_option, ", '_') as a PROPERTY.
  audit_option as VALUE, COUNT (*) as VALUE2 - how can I get this information from County?
  OF dba_stmt_audit_opts
  WHERE UPPER (audit_option) IN ('EDIT ANY TABLE', 'ALTER USER', 'CREATE a ROLE', 'CREATE a USER', 'CREATE THE SESSION', "DROP ANY PROCEDURE', 'DROP no matter WHAT TABLE", 'GRANT NO PRIVILEGE', "DROP no matter WHAT ROLE", "PROCEDURE", "SELECT ANY DICTIONARY", "No matter WHAT PURPOSE of the GRANT", 'CREATE any WHAT LIBRARY', 'CREATE LIBRARY')
  AND the success = "BY ACCESS.
  AND failure = "BY ACCESS.
  AND user_name IS NULL
  AND proxy_name IS NULL
  Audit_option group

  Hozy says:
  This is what the original sql looks like and now I don't know how to insert it in your suggested sql.

  Where I put your original query in a subquery with an alias by dsao, just replace this application with your new query.

  Another thing - you use 'union '; I think this safely could be replaced by "union all", as it seems that the lines will not be duplicated between the two queries.

  with options as (select 'AUDIT_CREATE_ROLE' property, 'CREATE ROLE' value from dual union all
                   select 'AUDIT_DROP_ANY_ROLE' property, 'DROP ANY ROLE' value from dual union all
                   select 'AUDIT_EXECUTE_PROCEDURE' property, 'EXECUTE PROCEDURE' value from dual union all
                   select 'AUDIT_SELECT_ANY_DICTIONARY' property, 'SELECT ANY DICTIONARY' value from dual union all
                   select 'AUDIT_GRANT_ANY_OBJECT' property, 'GRANT ANY OBJECT' value from dual union all
                   select 'AUDIT_CREATE_LIBRARY' property, 'CREATE LIBRARY' value from dual union all
                   select 'AUDIT_AUD$' property, 'AUD$' value from dual union all
                   select 'AUDIT_ALTER_ANY_TABLE' property, 'ALTER ANY TABLE' value from dual union all
                   select 'AUDIT_ALTER_USER' property, 'ALTER USER' value from dual union all
                   select 'AUDIT_CREATE_USER' property, 'CREATE USER' value from dual union all
                   select 'AUDIT_CREATE_SESSION' property, 'CREATE SESSION' value from dual union all
                   select 'AUDIT_DROP_ANY_PROCEDURE' property, 'DROP ANY PROCEDURE' value from dual union all
                   select 'AUDIT_DROP_ANY_TABLE' property, 'DROP ANY TABLE' value from dual union all
                   select 'AUDIT_GRANT_ANY_PRIVILEGE' property, 'GRANT ANY PRIVILEGE' value from dual union all
                   select 'AUDIT_CREATE_ANY_LIBRARY' property, 'CREATE ANY LIBRARY' value from dual),
          dsao as (select 'AUDIT_'||replace(audit_option, ' ', '_') as property,
                          audit_option as value,
                          count(*) as value2
                   from   dba_stmt_audit_opts
                   WHERE  UPPER(audit_option) IN ('ALTER ANY TABLE',
                                                  'ALTER USER',
                                                  'CREATE ROLE',
                                                  'CREATE USER',
                                                  'CREATE SESSION',
                                                  'DROP ANY PROCEDURE',
                                                  'DROP ANY TABLE',
                                                  'GRANT ANY PRIVILEGE',
                                                  'DROP ANY ROLE',
                                                  'EXECUTE PROCEDURE',
                                                  'SELECT ANY DICTIONARY',
                                                  'GRANT ANY OBJECT',
                                                  'CREATE ANY LIBRARY',
                                                  'CREATE LIBRARY')
                   AND    success = 'BY ACCESS'
                   AND    failure = 'BY ACCESS'
                   AND    user_name IS NULL
                   AND    proxy_name IS NULL
                   GROUP BY audit_option
                   union all
                   select 'AUDIT_'|| replace(object_name,' ','_') as property,
                          object_name as value,
                          count(*) as value2
                   from   dba_obj_audit_opts
                   where  object_name='AUD$'
                   and    owner in ('SYSTEM','SYS')
                   and    object_type='TABLE'
                   and    upd='A/A'
                   and    del='A/A'
                   group by audit_option)
  select o.property, o.value, nvl(dsao.value2, 0) value2
  from   options o,
         dsao
  where  o.value = dsao.value (+)