Access Restriction tab is missing on the interface web e3000

Similar Questions

• WRT610N v2 - the "Access Restrictions" menu is missing in the administration interface.

  Hello

  I would like to use the features of the WRT610N v2 access restrictions. Unfortunely the menu "Access Restrictions" is missing in the admin GUI. I have all the others: ' Set - up ', 'Wireless', 'Security', storage, Applications and games, Administration, and status.

  I checked the Firmware already and I use the last one that is available on the cisco web site.

  I also noticed that I don't have the 'Cisco's Linksys' text in the upper left as can be read on the user guide, but only "Cisco".

  You have any clues?

  Thank you very much in advance

  Hi thanks for your messages.
  I found that the defender of network domestic in admin-management solved disabling my problem: I now have access to the menu acess restriction.
  Thanks again for your time.

• Write access restriction tab missing

  I'm a bit confused, I have 2 routers wireless wrtg 56 g a v 1.0 and 1.1 v or has the 'access restricted' tab is shown in the manual and nor only accpets firmmware upgrade? Seems to be a bit fraudulent to announce something that does not exist. Being that neither router has the tab I have to assume its naot just luck to programming and like I said neither router accepts a firmware. Someone else has something to add?

  Charles Congema MCSE

  Can you make a screenshot of what you have on your router? Maybe you have some very old firmware running on the routers.

  Also, make sure that no antivirus or Firewall interferes with the web interface of the router...

• WRT310N Access Restriction tab

  I've recently updated the firmware in my router from 1.0.04)is to the most recent 1.0.07 build 14. I felt the need to update since my router stop randomly distributed signal wireless and after a few minutes back. but this isn't the question, given that the new firmware does not (again, * fingers crossed *).

  Since the update, I noticed one thing. The "restricted access" feature on the router isn't there anymore. Said live support they have never seen it happen before and directed me to the HDN stuff on the LELA software (after telling me to do the standard stuff for 5 minutes). I see the function type available out there to a more ' user-friendly '. I don't understand how the feature may not be present on the GUI main but is available through some software. I, personally cannot justify paying for the HDN stuff just for access restriction tab controls who were previously unscathed and continue to be free on all other routers, and most of the others probably not as well. But I'm curious to see if others have noticed this as well, and that throughout the community thought, that's about it.

  I thought about it... I had installed LELA previously and apparently if you keep things active HND he removes the tab. With LELA installed stuff you must disable all HND stuff, then the tab back. The tab is always available by typing the link in (/ Filters.asp) directly.

  And if uninstall you it, the router never gets the tab back unless you re - install then disable them stuff HND then uninstall once more.

• Could not load the interface Web VMware Server 2

  Hello

  It seems that there have been a number of users has a problem similar to mine. Unfortunately so far it seems not be an easy fix. A few weeks ago, I downloaded VMware Server 2.0.2 and installed on my Ubuntu 8.04 Server. Surprisingly, it worked very well and I set up a virtual machine via the web interface. It took 3 weeks later I started having problems. Or, when I tried to access the web interface through the browser page just came not upward or it came I have connected, but then was then put on the door.

  Initially, I have done the following but doesn't seem to help.

  -Reboot the system

  -Restart all vmware services

  -Delete all cookies and cache.

  Then I thought that this question had to do with the process of webaccess. It seems that the process was not because for a very short period of time, the connection appeared and I was able to connect. But after a short period of time, it displays an error and then the connection was unreachable again.

  I checked the port 8308 below:

  netstat - LNP | grep: 8308

  TCP 0 0 0.0.0.0:8308 0.0.0.0: * LISTEN 5754/webAccess

  Here is the response from audit ipv6:

  netstat - LNP | grep tcp6

  ping6-c1 localhost

  Unknown host

  I disabled it by changing of ipv6 on off in the etc/modprobe.d/aliases.

  My hosts file resembles the following:

  127.0.0.1 localhost

  127.0.1.1 web web.cinci.rr.com

  The following lines are desirable for the hosts with IPv6 support

  : 1 localhost ip6 ip6-loopback

  FE00::0 ip6-localnet

  FF00::0 ip6-mcastprefix

  FF02::1 ip6-allnodes

  FF02::2 ip6-allrouters

  FF02::3 ip6-allhosts

  I have attached the file proxy.log. I saw a few exceptions so don't know if this has to do with the problem.

  Also, I've included the hostd.log (it's in a zip archive because there are a few files of newspapers spend). I have

  Finally, I checked all the active internet connections and sockets. The results are below:

  Connections Internet active (only servers)

  Name of Proto Recv-Q Send-Q address foreign address State PID/program Local

  TCP 0 0 127.0.0.1:8005 0.0.0.0: * LISTEN 6910/webAccess

  TCP 0 0 0.0.0.0:902 0.0.0.0: * LISTEN 6888/vmware-authdla

  TCP 0 0 0.0.0.0:8009 0.0.0.0: * LISTEN 6910/webAccess

  TCP 0 0 0.0.0.0:8333 0.0.0.0: * LISTEN 6994/vmware-pass

  TCP 0 0 0.0.0.0:80 0.0.0.0: * LISTEN 4917/apache2

  TCP 0 0 127.0.0.1:8307 0.0.0.0: * LISTEN 6994/vmware-pass

  TCP 0 0 0.0.0.0:8308 0.0.0.0: * LISTEN 6910/webAccess

  TCP 0 0 0.0.0.0:23 0.0.0.0: * LISTEN 4421/sshd

  TCP 0 0 0.0.0.0:443 0.0.0.0: * LISTEN 4917/apache2

  TCP 0 0 0.0.0.0:8222 0.0.0.0: * LISTEN 6994/vmware-pass

  UDP 0 0 0.0.0.0:68 0.0.0.0: * 4393/dhclient3

  brute 0 0 0.0.0.0:1 0.0.0.0: * 7 6634/vmnet-natd(8)

  UNIX domain sockets active (only servers)

  Proto RefCnt flags Type State I-node PID/name path of the program

  UNIX 2 BDRM STREAM LISTEN 16158 6994/vmware-pass/var/run/vmware/root_0/1267514173386057_6994/ha-nfc-fd

  UNIX 2 BDRM STREAM LISTEN 16165 6994/vmware-pass/var/run/vmware/root_0/1267514173386057_6994/ha-nfcssl-fd

  UNIX 2 BDRM STREAM LISTEN 16167 6994/vmware-pass/var/run/vmware/proxy-Web server

  UNIX 2 BDRM STREAM LISTEN 16189 6994/vmware-pass/var/run/vmware/root_0/1267514173386057_6994/hostd-vmdb-fd

  UNIX 2 BDRM STREAM LISTEN 16191 6994/vmware-pass/var/run/vmware/proxy-mob

  UNIX 2 BDRM STREAM LISTEN 15714 6634/vmnet-natd(8) /var/run/vmnat.6634

  UNIX 2 BDRM STREAM LISTEN 11895 4940/python /var/run/fail2ban/fail2ban.sock

  Finally, just to try to "start over". I removed VMware Server system and reinstalled. Since the virtual machine is in a separate Directory I thought I had nothing to lose. Removal and resettlement seem to succeed. After a reboot and an attempt to access the interface web it STILL didn't work. I'm really at a loss right now. Any help would be much appreciated.

  Thank you

  Aaron

  Hello

  Welcome to

  Don't forget to give my answer. It is the way to give users of vmware communities who helps others.

  Best wishes / Saludos.

  Pablo

  Please consider providing any useful answer. Thank you!! - Por favor considered premiar las useful responses. ¡¡MUCHAS gracias!

  Virtually noob blog

• the touchpad tab is missing from the control panel can be restored on vostor 1700 running xp

  To turn off the touchpad on my laptop Dell Vostro 1700 under XP, but the touchpad tab is missing when I opened the control panel mouse icon

  http://www.Dell.com/support/drivers/us/en/19/driverdetails?DriverID=XV8FK

  This is your driver for the touchpad, it should be located in the dell folder, do a search on your pc for

  R165804.exe

  and check that you have the folder options to show hidden files and not to hide system files.

  Normally, it showed as icon in the control panel?

• ReadyBoost - tab is missing in the properties, and it does not work!

  Title says it all. When I insert a disc and the Autorun dialog opens, if I click "Speed up my system" it just opens the property page for the device with the free space, etc. The ReadyBoost tab isn't there.

  I especially don't think that I NEED, I'm 64-bit Windows 7 Home Premium with 4 GB of RAM. But this isn't the point, please do not answer with "you don't need, so don't bother. All I see is that is not a feature that is supposed to be there, if I need it or not, it could indicate a bigger problem with my PC.

  Where the ReadyBoost tab? I know in Win7, the service is incorporated with Superfetch, and I checked this service is launched and automatic. I tried to format the USB key as each file system and also tried the switching device to "Optimize for performance" etc. Nothing. I ran "sfc/scannow", and he found no problem.

  Any help guys?

  Hello

  ReadyBoost in Windows 7 is much better integrated and provides even better than Vista speed.

  ReadyBoost still help your performance if you run a lot of memory intense programs, run a
  many programs in the same time, or use some that access large files. In Windows 7 there is none
  upper limit of the amount of memory to use for ReadyBoost. In Vista, it was limited to 4 GB.

  Turn ReadyBoost on or off for a storage device
  http://Windows.Microsoft.com/en-us/Windows7/turn-ReadyBoost-on-or-off-for-a-storage-device

  Keep an eye on ReadyBoost with Windows 7 performance monitor
  http://blogs.TechRepublic.com.com/window-on-Windows/?p=2257

  ReadyBoost in Windows 7
  http://www.YouTube.com/watch?v=6j4GfafdNxE

  ReadyBoost
  http://Windows.Microsoft.com/en-us/Windows7/products/features/ReadyBoost

  Explore the features: Windows ReadyBoost
  http://www.Microsoft.com/Windows/Windows-Vista/features/ReadyBoost.aspx

  ============================================

  Start - computer, or Windows Explorer right click on the drive - properties - ReadyBoost
  tab will indicate IF the drive passes the test of ReadyBoost.

  The problem may be with the USB key you try - it might be too slow. Several USB thumb-
  readers have a bit of fast memory, and then the rest is much slower. Some of them will spend the
  ReadyBoost speed test but does not work properly. If a player does not have speed ReadyBoost
  test then ReadyBoost will not even an option.

  DON'T GO OUT AND JUST BUY A READER WHO CLAIMS THAT IT IS READY - READYBOOST
  many of them are or stretching at least the truth. Look at the sides of the player below and buy
  a you know is FAST.

  Don't forget that the readyboost max cache is 4 GB for Vista and unlimited in Windows 7. If your
  device is 4 GB on Vista, you can use the rest for storage. In Windows 7, you can
  Use any space not reserved for ReadyBoost as storage device. And you need a fast reader.

  ReadyBoost - list of speed Flash memory
  http://www.techcrater.com/2007/04/05/ReadyBoost-Flash-memory-speed-list/

  How to find the index of ReadyBoost speed
  http://www.techcrater.com/2007/04/06/how-to-find-ReadyBoost-speed-rating/

  USB Flash Drive speed - driving tests size
  http://usbspeed.NirSoft.NET/

  http://www.grantgibson.co.uk/misc/ReadyBoost/?make=SanDisk

  http://www.techcrater.com/2007/04/05/ReadyBoost-Flash-memory-speed-list/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How to access the interface web web services test

  I'm running my server 10.3 in test mode. How can I access the web test for my web service interface?
  I can see the wsdl, but I can't access the test interface as in previous versions.
  
  Thank you

  Click in the table of your Web Service deployment.

  Scroll down to the section modules and components. Here, you should see a tree that contains Web Services.

  Click your web service

  Click on the test tab

  Open the tree and here, you should see the link to test client.

  If you have the location of the WSDL file, you can also add: http://adminserverhostname:7001 / wls_utc /? wsdlUrl = forward, for example,

  http://adminserverhostname:7001/wls_utc/?wsdlUrl=http://serverhostname:port/CompanyWebService/CompanyService?WSDL
  

  in what http://serverhostname:port/CompanyWebService/CompanyService? WSDL is the location of the WSDL file

• LaserJet p1102w: how to access the interface web printer with new router

  I just bought a new wireless router, hoping that I'll be able to more easily print with my p1102w.

  Internet access works ok desktop and laptop (wireless).

  However, I had bookmarked the IP address of my printer, and before, I've always been able to access it by clicking on the bookmark. I checked the range of IP addresses for the router, and the IP of the printer is outside this range, so I don't know why I am no longer able to access to this. I can't access the web interface, whether they come from my laptop or desktop (wired). However, the printer is capable of printing from the desktop without problem.

  How do I enter this? I would like to restart the configuration wireless configuration, but I thought I needed the web interface for this.

  I should just insert the CD? I made a tweak or two and would prefer to keep all the settings of the printer even if I can, but I can start all over again if I have to.

  
  HP LaserJet p1102w

  I just deleted the printer on my laptop computer, reset the settings of the printer default and then run Setup from the wired desktop wireless utility wireless. Seems to have worked, I can now access the web interface via my laptop now.

• Tab reminders missing on the iPhone 6. How can I get it back?

  I can't see my reminders tab. Only the scheduling tab and tab tasks. I used to have a tab reminders, but he disappeared. Any ideas?

  That is the app are you talking about?

• Additional tabs are missing from the display properties

  original title: display problems (broken display properties window)

  Well, I have a truckload of display problems, many of them are probably related, but I will address these one at a time. I'll start with my display properties.

  When I open the display properties, I get this little window:

  http://img.Photobucket.com/albums/V371/battousaiofnphiles/screencaps/BrokenControlpanel1.jpg

  Look at it carefully, it is supposed to look like this:

  http://img.Photobucket.com/albums/V371/battousaiofnphiles/screencaps/BrokenControlpanel2.jpg

  Now, whenever I start the computer I have to reinstall my display driver and reset my display properties. When you reset my 600x800px at 1440 x 900 screen, I have to select one click on the theme 'Apply' before I give myself the tabs to set different individual elements of the screen and click 'Apply' to effectively apply my desired settings.

  Now I have a Vid card for replacement in the mail which I think should solve the forced back on the display driver, but I'm confident that's not going to solve the problem of display properties broke.

  * EDIT *.
  I'm running on Windows XP Professional SP3.

  Original question is resolved. I open a prompt of commands and regsvr32 /i shell32 then restarted and enter regsvr32 themeui. My gfx card is always failing to start, but once started, the tabs are back where they belong.

• User tab is missing from the snap-in group policy in Microsoft Management Console (MMC) and Windows XP users

  I'm trying to add the user and group policy in Windows XP in MMC. However, when I click on browse, it has no user inside tab. How an application policy for a certain group of users?

  Hi Muhammad,

  Your computer is connected to the server or domain?

  If your computer is in a domain environment, please ask your question in the TechNet forums for assistance.

  Hope the helps of information.

• Windows Update tab is missing from the system property

  I use windows xp sp3 and that no windows don't update tab highlighted in the property system. I tried all the things here:

  http://support.Microsoft.com/kb/326686
  but fail to solve the problem.
  Help, please

  Hi Harjap,

  It was that of the last changes made to the computer added as new hardware or software?

  Start the computer in Safe Mode. The Windows Update tab appear? If so, we can eliminate the base as the origin of the problem drivers.

  Start your computer in a clean boot. The Windows Update tab appear? If so, the problem may be caused by a software conflict.

  You have another user on this coomputer account? You are able to see the update of Windows on another user account tab? If the problem does not exist in this user account, the original user account may be damaged. Follow the steps in this document to recover from a corrupted user profile.

• The Structure tab is missing from the Insert tab

  where and how do I access please, I can access it on DW CS6 I'm new and need help please. Thank you. Andy

  Tab structure is in DW CC.

  In CS6 12.2, build #6006, it's still called layout.

  Nancy O.

• Basic Settings tab is missing from the develop module

  I recently purchased lightroom 4 after using the free trial of 30 days, and I have no basic settings on my mac, can't find them anywhere? My tabs go to color curve histogram. Where are they?

  Very confused...

  Title of the message was edited by: Brett N

  No need to be confused, you have probably inadvertently it hidden. The thing is that in each Module, all the individual panels in each of the left and right columns can be eventually displayed or hidden under the control of the user (there are a few minor exceptions such as the browser, but overall, this control is available throughtout Lightroom).

  So to view the options for each column (in your case, expand the column to the right of the Module), simply right click (ctrl-click on Mac) on ONE of the headers that are displayed in this column, and you will see a menu of local context as the attached screenshot. Here you can see that I previously hid the base Panel, so all I have to do is click on the baseline and it is restored. Conversely, I can use this method to hide a Panel.