Access to Nexus

Similar Questions

• Can I recover from a damaged screen Nexus 4 Firefox bookmarks?

  I cleverly broke the screen on my Nexus 4 lately, so while the phone itself works (and I can log in to view / edit files using a USB cable), I can't do anything that involves the use of the screen (download / running apps, writing, etc.).

  I have now replaced it with a Samsung Galaxy S6 and have installed the Firefox browser for mobiles, but would like to get my old favorites off the coast of the Nexus. I hadn't used synchronization, or all apps to save them, so I guess my only option is if I can copy in the whole of system files.

  Is it possible- and if so, where can I find the? I found a Computer\Nexus 4\Internal storage\Android\data\org.mozilla.firefox folder, but it doesn't seem to have anything in it (0 files, 2 folders). I'm not very optimistic at this point, but appreciate any suggestions!

  You would need to root the phone to access the bookmarks/history file (browser.db).

• Since I have configured my Nexus 7 I receive email on this subject, but not in my Inbox in Thunderbird on my desktop PC. Why is this?

  I have a Nexus 7 run Android version 4.4.2. I get emails from my account gmail on it without problem, but they do not come in my Inbox in Thunderbird on the desktop PC more and I would that they. I don't have the mind to read emails on the Tablet, but I would say rather desktop, because I can actually type and the keyboard of the Tablet is a pain.

  If you want to access your account from multiple devices I use IMAP on all of them. That's what this Protocol was developed for.

• Bricks of Nexus?

  First of all, I apologize if this is a topic is not allowed here, but I (and many others) are at a crossroads. I searched and saw no that this issue addressed anywhere on here.

  I'll try and keep this as short as possible...

  Tried to update to 5.1 by flashing the Google provide images of the factory - made several times without problem through some features of Nexus. I love flashing clean, so I didn't before flashing the .img file factory:

  fastboot erase boot

  fastboot erase cache

  fastboot erase recovery

  fastboot erase system

  I then proceeds to Flash.. .img files after flashing images of factory I have a loop the start of Google screen. I can always access fastboot, but I locked my bootloader (STUPIDLY) after flashing 5.1 files that I wanted to go completely stock. Now I can't Flash images, because I have a locked bootloader and I can't oem unlock in fastboot as he falls down and wrote:

  Unlock C:\Android\sdk\platform-Tools>fastboot oem

  ...

  (bootloader) Check "allow the OEM Unlock' in the developer Options.

  FAILED (remote failure)

  Finish. total time: 0.000

  And of course I can't check this box that I can not boot into Android...

  Is there ANYTHING I can do to recover from this?

  There are many sites dedicated to change and manage software; a Google search should help you find a couple where you can get help. Good luck!

• Nexus 7 & Photosmart 5520

  Hi all

  Hoping someone can help me here. I try to connect my Nexus 7 on my Photosmart 5520 and I can't manage it.

  I got it work using a Wifi network and an HP Eprint App, but I need to work in an environment without a WiFi network (on a truck). That I thought I could do using Direct wireless.

  I enabled wireless directly on the printer, but when I go to Wi - Fi Direct on the link, I get no device does not appear.

  The printer appears in the list of ordinary wireless networks, but when you connect like this you can't use 3G, we need to be able to do.

  Can anyone offer any advice for me?

  Thank you

  Neil

  Hello

  Broadcast live from your Nexus is a different feature, you must connect to the metwork HP wireless Direct any available Wi - Fi Access Point by selecting it in the list of connection Wi - Fi.

  This is an expected behavior, while the android device is connected to the network HP wireless 3 G Internet Direct is not available, Direct wireless feature is intended to provide capabilities to print wirelessly without router, network not fully the capabilities of

  • Important: You can access the Internet via wireless HP direct connection.

  http://WWW8.HP.com/us/en/campaigns/wireless-printing-Center/wireless-direct.html

  Shlomi

• How can I transfer photos from your Windows Vista PC to Nexus 7 tablet?

  Original title: Mr
   
  MY PC WORKS WITH VISTA - HAVE A TABLET (NEXUS 7) HOW CAN I TRANSFER PHOTOS FROM MY PC TO THE NEXUS 7?

  Hi John,.

  Thanks for posting your query in Microsoft Community and we give the opportunity to help you.

  If you have any documents on your old computer, you must copy the files like documents or photos on your USB Flash drive first. Connect the USB stick or external hard drive to Nexus 7 tablet and manually copy photos or documents.

  Alternatively, you can use SkyDrive to access any file from anywhere. For more information, see the following article:

  SkyDrive advice to try - synchronization of files between all your computers

  http://Windows.Microsoft.com/en-in/SkyDrive/any-file-anywhere#1TC=T1

  Hope this information helps.

  Let us know if you encounter problems under Windows in the future. We will be happy to help you.

• Nexus 5000 - behavior of odd Ethernet (link inactive down) interface

  Hi guys,.

  It would sound really trivial, but it's very strange behavior.

  -We have a server connected to a 2, 5000 s Nexus (for resiliancy)

  -When there is that no config on the ethernet interfaces don't either, the ethernet interface is up / upward, there is a minimum amount of traffic on the link, etc. For example

  Ethernet1/16 is in place
  Material: 1000/10000 Ethernet, address: 000d.ece7.85d7 (bia 000d.ece7.85d7)
  Description: shipley - p1.its RK14/A13
  MTU 1500 bytes, BW 10000000 Kbit, DLY 10 usec,
  reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation ARPA
  Port mode is access
  full-duplex, 10 Gb/s, media type is 1 / 10g
  Lighthouse is off
  Input stream control is turned off, output flow control is disabled
  Flow mode is dedicated
  Switchport monitor is off
  Last link flapped 00:00:07
  Last clearing of "show interface" counters 05:42:32
  entry 30 seconds 0 bps, 0 packets/s rate
  exit rate of 30 seconds 96 bps, 0 packets/s
  Load-time #2: 5 minutes (300 seconds)
  heat flow 0 bit/s, 0 pps; output rate 8 bits/s, 0 pps
  RX
  0 packets unicast packets multicasts 0 0 broadcast packets
  entry packets 0 0 bytes
  0 packets of removal of storm Jumbo packets 0
  Giants of Runts 0 0 0 CRC 0 no buffer
  short entry error 0 0 0 overflow under-run 0 0 ignored
  0 0 bad etype watchdog fall 0 bad proto place 0 if drop
  0 entry with dribble 0 rejection of entry
  Rx pause 0
  TX
  0 163 0 multicasts packets packets broadcast unicast packets
  packages of exit 163 15883 bytes
  0 jumbo packets
  collision of errors 0 0 released 0 postponed end collision 0
  0 lost 0 carrier no carrier 0 chatter
  Tx break 0
  1 interface resets

  -As soon as I set up the link to be an access port, the link goes down, "inactivity" example of markup

  SH int e1/16
  Ethernet1/16 is down (inactive)
  Material: 1000/10000 Ethernet, address: 000d.ece7.85d7 (bia 000d.ece7.85d7)
  Description: shipley - p1.its RK14/A13
  MTU 1500 bytes, BW 10000000 Kbit, DLY 10 usec,
  reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation ARPA
  Port mode is access
  Auto-duplex, 10 Gb/s, media type is 1 / 10g
  Lighthouse is off
  Input stream control is turned off, output flow control is disabled
  Flow mode is dedicated
  Switchport monitor is off
  Last link flapped 05:38:03
  Last clearing of "show interface" counters 05:41:33
  entry 30 seconds 0 bps, 0 packets/s rate
  exit rate of 30 seconds 0 bps, 0 packets/s
  Load-time #2: 5 minutes (300 seconds)
  heat flow 0 bit/s, 0 pps; output rate 0 bps, 0 pps
  RX
  0 packets unicast packets multicasts 0 0 broadcast packets
  entry packets 0 0 bytes
  0 packets of removal of storm Jumbo packets 0
  Giants of Runts 0 0 0 CRC 0 no buffer
  short entry error 0 0 0 overflow under-run 0 0 ignored
  0 0 bad etype watchdog fall 0 bad proto place 0 if drop
  0 entry with dribble 0 rejection of entry
  Rx pause 0
  TX
  0 packets 146 0 multicasts packets broadcast unicast packets
  packets to exit 146 13083 bytes
  0 jumbo packets
  collision of errors 0 0 released 0 postponed end collision 0
  0 lost 0 carrier no carrier 0 chatter
  Tx break 0
  0 resets interface

  -This behavior is visible on the two 5Ks

  -J' have tried to use a different set of ports, SFP and fiber cabling without result changed

  -I can't understand this behavior?  In this, why to configure the port would cause the link to go down?

  -If anyone has experience this before, or could shed some light on this problem, it would be appreciated.

  SH ver
  Operating system (NX - OS) Cisco Nexus software
  TAC support: http://www.cisco.com/tac
  Copyright (c) 2002-2010, Cisco Systems, Inc. All rights reserved.
  The copyright in certain works contained in this document are the property of
  other third parties and are used and distributed under license.
  Portions of this software are covered by the GNU Public
  License. A copy of the license is available at
  http://www.gnu.org/licenses/gpl.html.

  Software
  BIOS: version 1.2.0
  Charger: version N/A
  Kickstart: version 4.2 (1) N1 (1)
  system: version 4.2 (1) N1 (1)
  power-seq: version v1.2
  Compile of the BIOS time: 19/06/08
  kickstart image file is: bootflash:/n5000-uk9-kickstart.4.2.1.N1.1.bin
  Kickstart compile time: 2010-04-29 19:00 [2010-04-30 02:38:04]
  filesystem image is: bootflash:/n5000-uk9.4.2.1.N1.1.bin
  compile time: 2010-04-29 19:00 [30/04/2010 03:51:47]

  Thank you

  Sheldon

  Hello

  If you have configured ports such as access to VLANs ports, who are either:

  (a) not configured on the switch / present in the database for vlan.

  or

  (b) present in the database, but it is in a suspended state.

  You will encounter this problem.  Please can you check the status of the VLAN?

  Hope this helps

  Martin

• L3 Nexus 7000 routing Proxy

  Hello

  I propose Nexsu 7000 as backbone switch for my client.

  But I do not understand why proxy L3 routing must be used under M & F2 mixed condition.

  But module F2 also bear all capacity of L3, L3 routing dosen't support of the F2 module with module of the M series.

  Could you tell me why this is happening and explain Nexus 7000 architecture?

  Thank you

  Yun.

  M2 + F2e in same VDC works dated 6.2 (2), in which case F2e module returns to the classic transmission L2 mode, leaving all L3 decisions up to the M2 module, so you still need L3 routing proxy.

  I think the reasoning behind this is because of the motor M2 L3 being much more potent than the freight forwarder F2e L3.  For example, the motor M2 can make OTV, the impossible F2e.  Logic to return L3 decisions for a more powerful card.

  What I find strange is that although F2e online map has an integrated transmission of L3 engine, that I can not configure the IP of L3 addresses directly on F2e ports.  Creating a VLAN SVI and by setting the port access mode F2e work, but if I only need a link point single point of L3 between the Nexus 7 K and another device, and I have configured the vPC, vPC then in an inconsistent with Type 2 State, because the VLAN and/or IVR is not present on the switch of peers.

• OnPlus discovery and Nexus 5548

  Hello

  I just installed an OnPlus agent for a customer who has a Nexus with a 3 layer daugthter card 5548 as their central switch, but the agent is not discovered any device beyond the vlan in which he is sitting.  Does anyone have any experience with the OnPlus ageent and Nexus switches.  It is obviously not a Cisco device supported but I configured IDs connection and snmp access to the switch on the portal, but still nothing is discovered.  Any advice greatly appreciated.

  Concerning

  Ian

  Hi Ian,

  To discover the multi - VLAN, connect the On100 to an 802. 1 q trunk port. This will allow the On100 discover other VLANs. It is currently connected to an access port which is to limit the broadcast traffic of the other VLAN.

  Although the device is not currently supported, he discovered and enable basic support we provide for all detected devices.

  Thank you

  The OnPlus team

• Topology of Nexus 5 k / FCoE extending between 2 campus

  Hello

  I need help to answer the following questions related to the interconnection of 2 campuses (top and bottom in the attached diagram) using the ports of FCoE Nexus 5 K:

  Please check the attached topology.

  QUESTIONS RELATING TO THE:

  Multi-hop FCoE:

  ·         The link (10G, SFP +) between pairs of N5k, interconnecting 2 campuses, carry FCoE traffic (Ethernet and FC on the same link):

  ·         Can servers with the adapters of the ANC in the lower Campus, store access the CF in the upper Campus?

  ·         Can the server with HBA FC adapters in the lower Campus, store access the CF in the upper Campus?

  ·         Can expand us the tissue 2fc between the 2 sites using this link of FCoE?

  ·         This link can carry the traffic of Ethernet between 2 LANs (between Upper and Lower campus)

  Thank you.

  It is therefore 3km for FCoE traffic. "but in the case of traffic FC (via FCoE)(, ce que je veux dire si nous avons deles de serveurs avec deles de adaptateurs HBA FC dans le Campus inférieur, accès àle stockage FC dans le Campus supérieur) binding, is it always 3 km limitation? or less?

  -> 3 km, independent how the initiators and targets are connected. (Limitation is for a single jump of FCoe)

  About using the native CF option to extend this link (of course withouth ethernet), to go for an MDS switch? or module of the simple use of the CF to the Nexus 5 k 2?

  -> You can do it directly using CF Module if you run the N5K in switching mode (not in NPV Mode)

  do you have a referral link, mentioning these distances?

  -> Sorry I also had this information via Cisco SE

  Hubert

• Nexus 1000v, UCS, and Microsoft NETWORK load balancing

  Hi all

  I have a client that implements a new Exchange 2010 environment. They have an obligation to configure load balancing for Client Access servers. The environment consists of VMware vShpere running on top of Cisco UCS blades with the Nexus 1000v dvSwitch.

  Everything I've read so far indicates that I must do the following:

  1 configure MS in Multicast mode load balancing (by selecting the IGMP protocol option).

  2. create a static ARP entry for the address of virtual cluster on the router for the subnet of the server.

  3. (maybe) configure a static MAC table entry on the router for the subnet of the server.

  3. (maybe) to disable the IGMP snooping on the VLAN appropriate in the Nexus 1000v.

  My questions are:

  1. any person running successfully a similar configuration?

  2 are there missing steps in the list above, or I shouldn't do?

  3. If I am disabling the snooping IGMP on the Nexus 1000v should I also disable it on the fabric of UCS interconnections and router?

  Thanks a lot for your time,.

  Aaron

  Aaron,

  The steps above you are correct, you need steps 1-4 to operate correctly.  Normally people will create a VLAN separate to their interfaces NLB/subnet, to prevent floods mcast uncessisary frameworks within the network.

  To answer your questions

  (1) I saw multiple clients run this configuration

  (2) the steps you are correct

  (3) you can't toggle the on UCS IGMP snooping.  It is enabled by default and not a configurable option.  There is no need to change anything within the UCS regarding MS NLB with the above procedure.  FYI - the ability to disable/enable the snooping IGMP on UCS is scheduled for a next version 2.1.

  
  
  This is the correct method untill the time we have the option of configuring static multicast mac entries on
  
  the Nexus 1000v.  If this is a feature you'd like, please open a TAC case and request for bug CSCtb93725 to be linked to your SR.
  
  This will give more "push" to our develpment team to prioritize this request.
  Hopefully some other customers can share their experience.
  Regards,

  Robert

• Can I generate self-signed certificates free for Nexus 9 K?

  Hi, I have 22 9Ks Nexus that I just upgraded to 3,0000 I4 so I can use the REST API.

  I use vRealize Orchestrator for automation, and I can't access the REST API on the Orchestrator help link, as certificates are at expiration.

  I can't find much information on this subject for the 9 K, unless the 9Ks are mode of the AIT, in this case I think that TACS are the only people who can generate a certificate.

  Does anyone know otherwise work around this? Otherwise, I'll have to approach a TAC case for 22 certificates generated :-/

  Cheers, Dom

  I'm not familiar with the technology with what you're trying to integrate, but here's a guide on how generate a custom SSC (self-signed Cert) on a device:
  #conf t
  #hostname DEVICE01-NOTE: must not be changed
  #ip - domain test.local

  generate a General key label SSC_KEY module 2048 rsa key #crypto

  #crypto pki trustpoint SSC_LOCAL
  #subject - name, CN = DEVICE, DC = test, DC = local
  #enrollment selfsigned
  # crl revocation checking
  #rsakeypair SSC_KEY 2048

  #crypto ca enroll COMMAND SSC_LOCAL HIDDEN: initiate the creation of SSC

  % Include the serial number of the router in the name of the topic? [Yes/No]: no
  % Include an IP address in the name of the topic? [None]:
  % Generate self signed certificate router? [Yes/No]: Yes

  Router self-signed certificate created successfully

  After this make sure that you do NOT change the host name of the device :)

• Nexus 1000v Vmotion

  Hello.

  Is it possible to activate/add a vmotion port-profile after the hosts have been migrated in the Nexus DVS?

  The hosts are ESXi4.1 update 1 with a single vmk0, double nic

  The documentation I have, we need to create groups of vmk additional before adding the host in the DVS and those port-profile maps then.

  I need to add these vmk in retrospect, that the hosts are in a production environment.

  Thank you

  Danie

  Yes.  First create a Port for VMotion on the MSM profile.  Then select the host and go to Configuration-> Neworking-> manage e-cards-> Add-> new map virtual adapter/Migrate virtual.

  This will allow you a VMK new interfaces configuration and/or entitlement profile VMotion Port created previously.

  VMotion port-profile would look something like:

  profile port vethernet dvs_vmotion type

  VMware-port group

  switchport mode access

  switchport access vlan x

  no downtime

  enabled state

  Kind regards

  Robert

• groups of IP addresses are supported on Nexus-5000 and models down?

  Looking online, I see the ip address of the object-group is explicitly listed as

  supprted on Nexus 7000 but on other model documents command is confusing.

  For example, for Nexus-5000 references to IP address source/destination to refuse the order group objects exist in the documentation older versions of NX - OS 4.0 and 4.1 (with no explicit object-group command is listed in the same CLI reference) but in v5.x current source/destination shows no Group of IP addresses as available choice.

  Can one with access to the Nexus 5000 or 3000 check if the ip address of the object-group is an order valid on this platform?

  It seems full support (like on IOS), using the IP address groups was established in v6 NX - OS (which only works on platform 7000).

  There was also presented on the lower models?

  Thank you.

  Hi Alexandre

  This feature is not currently supported on N5k/N3k

  If you have specific requirements for this feature, please join your team has to describe your network design. And they will be able to help you.

  HTH,

  Alex

• VXLAN on UCS: IGMP with Catalyst 3750, 5548 Nexus, Nexus 1000V

  Hello team,

  My lab consists of Catalyst 3750 with SVI acting as the router, 5548 Nexus in the vpc Setup, UCS in end-host Mode and Nexus 1000V with segmentation feature enabled (VXLAN).

  I have two different VLAN for VXLAN (140, 141) to demonstrate connectivity across the L3.

  VMKernel on VLAN 140 guests join the multicast fine group.

  Hosts with VMKernel on 141 VLAN do not join the multicast group.  Then, VMs on these hosts cannot virtual computers ping hosts on the local network VIRTUAL 140, and they can't even ping each other.

  I turned on debug ip igmp on the L3 Switch, and the result indicates a timeout when he is waiting for a report from 141 VLAN:

  15 Oct 08:57:34.201: IGMP (0): send requests General v2 on Vlan140

  15 Oct 08:57:34.201: IGMP (0): set the report interval to 3.6 seconds for 224.0.1.40 on Vlan140

  15 Oct 08:57:36.886: IGMP (0): receipt v2 report on 172.16.66.2 to 239.1.1.1 Vlan140

  15 Oct 08:57:36.886: IGMP (0): group record received for group 239.1.1.1, mode 2 from 172.16.66.2 to 0 sources

  15 Oct 08:57:36.886: IGMP (0): update EXCLUDE group 239.1.1.1 timer

  15 Oct 08:57:36.886: IGMP (0): add/update Vlan140 MRT for (*, 239.1.1.1) 0

  15 Oct 08:57:38.270: IGMP (0): send report v2 for 224.0.1.40 on Vlan140

  15 Oct 08:57:38.270: IGMP (0): receipt v2 report on Vlan140 of 172.16.66.1 for 224.0.1.40

  15 Oct 08:57:38.270: IGMP (0): group record received for group 224.0.1.40, mode 2 from 172.16.66.1 to 0 sources

  15 Oct 08:57:38.270: IGMP (0): update EXCLUDE timer group for 224.0.1.40

  15 Oct 08:57:38.270: IGMP (0): add/update Vlan140 MRT for (*, 224.0.1.40) by 0

  15 Oct 08:57:51.464: IGMP (0): send requests General v2 on Vlan141<----- it="" just="" hangs="" here="" until="" timeout="" and="" goes="" back="" to="">

  15 Oct 08:58:35.107: IGMP (0): send requests General v2 on Vlan140

  15 Oct 08:58:35.107: IGMP (0): set the report interval to 0.3 seconds for 224.0.1.40 on Vlan140

  15 Oct 08:58:35.686: IGMP (0): receipt v2 report on 172.16.66.2 to 239.1.1.1 Vlan140

  15 Oct 08:58:35.686: IGMP (0): group record received for group 239.1.1.1, mode 2 from 172.16.66.2 to 0 sources

  15 Oct 08:58:35.686: IGMP (0): update EXCLUDE group 239.1.1.1 timer

  15 Oct 08:58:35.686: IGMP (0): add/update Vlan140 MRT for (*, 239.1.1.1) 0

  If I do a show ip igmp interface, I get the report that there is no joins for vlan 141:

  Vlan140 is up, line protocol is up

  The Internet address is 172.16.66.1/26

  IGMP is enabled on the interface

  Current version of IGMP host is 2

  Current version of IGMP router is 2

  The IGMP query interval is 60 seconds

  Configured IGMP queries interval is 60 seconds

  IGMP querier timeout is 120 seconds

  Configured IGMP querier timeout is 120 seconds

  Query response time is 10 seconds max IGMP

  Number of queries last member is 2

  Last member query response interval is 1000 ms

  Access group incoming IGMP is not defined

  IGMP activity: 2 joints, 0 leaves

  Multicast routing is enabled on the interface

  Threshold multicast TTL is 0

  Multicast designated router (DR) is 172.16.66.1 (this system)

  IGMP querying router is 172.16.66.1 (this system)

  Multicast groups joined by this system (number of users):

  224.0.1.40 (1)

  Vlan141 is up, line protocol is up

  The Internet address is 172.16.66.65/26

  IGMP is enabled on the interface

  Current version of IGMP host is 2

  Current version of IGMP router is 2

  The IGMP query interval is 60 seconds

  Configured IGMP queries interval is 60 seconds

  IGMP querier timeout is 120 seconds

  Configured IGMP querier timeout is 120 seconds

  Query response time is 10 seconds max IGMP

  Number of queries last member is 2

  Last member query response interval is 1000 ms

  Access group incoming IGMP is not defined

  IGMP activity: 0 joins, 0 leaves

  Multicast routing is enabled on the interface

  Threshold multicast TTL is 0

  Multicast designated router (DR) is 172.16.66.65 (this system)

  IGMP querying router is 172.16.66.65 (this system)

  No group multicast joined by this system

  Is there a way to check why the hosts on 141 VLAN are joined not successfully?  port-profile on the 1000V configuration of vlan 140 and vlan 141 rising and vmkernel are identical, except for the different numbers vlan.

  Thank you

  Trevor

  Hi Trevor,

  Once the quick thing to check would be the config igmp for both VLAN.

  where did you configure the interrogator for the vlan 140 and 141?

  are there changes in transport VXLAN crossing routers? If so you would need routing multicast enabled.

  Thank you!

  . / Afonso