access to operator interface station globals

Similar Questions

• Update Station Globals of LAbWindows/CVI user interface

  
  

  Hello

  the first thing, why you posted this request twice, http://forums.ni.com/t5/NI-TestStand/Update-Station-Globals-from-CVI-UI/m-p/1317023

  to be able to update a StationGlobal, you must first get a reference to the engine, this can be done using ApplicationMgr.GetEngine)

  Once you have this reference, you can then get a reference to the StationGlobals by the use of Engine.Globals (). This property returns a PropertyObject.

  So now you can use the SetVal methods to define your boolean, for example PropertyObject.SetValBoolean ("MyBoolean", 0, True)

  hope this helps

• Many commands disabled in the operator interface

  Hello

  I use the full IO in c# on a system with a basic deployment license, and I see that a lot of commands is disabled, for example single-pass and execution (only Test DUT is active); also "Break" and "Break all ' in the menu debug is disabled when the system is running.

  I remember those who are active on other systems in the operator interface and I also checked that it uses the model that I use on all machines.

  What can cause such behavior?

  Best regards

  Peter

  Peter,

  It is a question of privilege.  What are the permissions of the user that logged in TestStand.  If it's an operator then you will see thos grayed out like that.  If it's a developer, technician or administrator, so they should be available.

  Kind regards

• Operator interface

  In the operator Interface Simple how would you code hard of a sequence into the window open the sequence file?

  Hi, Clint Eastwood. One way to do this is shown in the attached screenshot.  After the 'start' invoke the node, you can set down a 'OpenSequenceFile' invoke node (pass in a reference to the Application Manager) and then wire in your path to hardcode.  It is just a string constant.  You can then place down a property node "SequenceFile" (pass in a reference to the sequence of file View Manager) and wire in reference to the release of OpenSequenceFile.  This will fill the sequence files drop-down list box.

• Problems to show the driver IVI and property loader error messages when you use a type of operator interface

  I use UI operator (programmed in ICB, with asynchronous timer) in the folder OP1 in attached zip file. This operator interface does not have the error message from the driver of the IVI, properts, charger etc. on the screen (messages as in the photo attached error.jpg in zip file attached). Due to stability problems, I use this operator interface, but I need these error message. One other operator interface is OP2 in attached zip file. This operator interface puts the error message from the driver of the IVI, charger properts... on the screen (messages as in the photo attached error.jpg in zip file attached). Now, I want to have this feature with OP1 for reasons of stability I use OP1. How can I implement this in OP1? I tried and tried a lot of time, but I have not found a method to implement this. can someone help me? Thank you kind regards Samuel

  Hello, Johann,.

  I'm not sure you understood my problem. My problems are not the IVI and loader drivers error messages property! But my problem is, that errors of the IVI drivers and property loader operator interface does not bring on the screen. So to test this situation, cause an error of the driver of the IVI or shipper of property, then you can see that with a PC, you have an error message and with another IO no error message takes place and the test of stocks without a message. Do you know why this OI does not show the error messages and how showing the error message can be implemented in this operator interface

  concerning

  Samuel

• loading of vi with operator interface

  When I load a movie file with my operator interface, I always get a message that the vi is already in memory. When I close LV in taskmanager and load the sequence once again, the error has disappeared also. Is this a configuration problem? Because my system else do not have this problem.

  Thierry,

  I solved the problem with the dynamic loading of setting in step configurations. TNX!

• Access SupportAssist web interface from another computer?

  Hello

  I installed the Version 1.3.0.148 of SupportAssist for servers and I can't access the web interface from another computer, only from the server I have installed.

  I could not find in something configuration files allow only localhost.

  Is it possible to make the web interface available to other computers on the same LAN?

  Thank you

  Version 1.3.0.148 for servers

  Hello

  You can also access the SupportAssist on a remote system if the 2607 port is open on the system where the SupportAssist is installed.

  You can use the following URL to access help support

  https://

  installed >: 2607/SupportAssist

  Hope this helps

  Thank you

  Christelle

• SX10 - how to access the web interface behind a firewall

  Howdy

  I have a very simple configuration, router and behind her SX10. I can't access the web interface of the remote unit. Is there a port that I need to activate or something?

  When the device was connected directly to the modem, with the public IP address, I was able to connect to the web interface.

  any suggestions here?

  I enter anything in the field AllowRemote.

  Thanks in advance!

  Web interface can be accessed using HTTP ether (80) or HTTPS (443).  To you how you want to deploy, but you can use NAT on the router, port forwarding, or even put the SX10 in DMZ on the router.

• Help - LI running, but get Apache2 Ubuntu default page while trying to access the Web interface of log insight

  Hello

  I installed the Log Insight 2.5 VM via vCenter Server ESXi 5, 5. I was able to deploy the virtual computer successfully and you can see the network through VAPP Options settings. (Attached picture - TIME settings).

  Question:

  Unable to access LI web Interface. While trying to access the Web interface, I get 'Apache2 Ubuntu by default Page' (img attachment). Insight of the newspaper runs and opens the web application on port 80.

  Newspapers, controlled far-

  status of /etc/init.d/loginsight

  Open a session running Insight

  Attached image Loginsight2-DURATION - file /storage/core/loginsight/var/runtime.log

  # sh li - cassandra.sh - status

  SH: li-cassandra-sh: not found

  Check if the tcp 80 port is open through the netstat command. Yes, it is open.

  Telnet on port 80, it says connection and crashes. Image attached - telnet-LI

  Able to ping the IP address successfully.

  How can I check http logs on console LI?

  I would really appreciate response to this soon. I'm working on installation LI for more than a week and struggling to get through this way.

  Thank you

  Radhika

  I believe that you with the configuration, but I tell you that the configured IP address and the IP you hit in your browser are not still the same IP, Log Insight does not work on Ubuntu, so you hit another system. To prove this, connect you to the console of the Insight newspaper and run:

  # cat/etc/SuSE - release

  SUSE Linux Enterprise Server 11 (x86_64)

  VERSION = 11

  PATCHLEVEL = 2

  You will see that you are running SuSE to see a Ubuntu screen tells me that you have an IP address duplicate in your environment and you hit a node that is not an Insight newspaper. I hope this helps!

• [Microsoft] [ODBC Microsoft Access driver] Operation must use an update query.

  Trying to insertion or put to update an access database I get on the error message:
  
  [Microsoft] [ODBC Microsoft Access driver] Operation must use an update query.
  
  What is the cause of this, and what could be the solution?
  
  Thank you.
  
  Ross
  

  I discovered after testing that the directory where the database file resides must be barking like rwx as well - not intuitively obvious, certainly!

  I ended up creating a new directory with the file of database inside also well marked for write access in the world and relying on my permissions of normal file off root on the server to protect the directory and file.

  Thank you!

  Ross

• Operator interface customized to display the results of the multi-threads

  Dear OR Comunity.

  Let me describe my problem:

  TestStand test should be tested in PARALLEL, I need to use the model based on the parallel Model.seq.

  The steps in a test run of all the discussions had to be followed in the operator, such Interface shown on the image below (in a VI).

  Thank you for any recommendations!

  Just to answer the same question this morning:

  http://forums.NI.com/T5/NI-TestStand/TestStand-UI-SequenceView-control-and-parallel-threads/TD-p/319...

• Failure TestStand 2014 operator Interface examples

  I tried to run a number of examples that illustrate the operator TestStand 2014 (32 bit) functionality of the interface, such as handling user interface Messages.  When I load and run the .NET solution interface operator beneath the example file I get the following error:

  System.Runtime.InteropServices.COMException was unhandled
  HResult =-2147221164
  Message = recovery of the class factory COM for component with CLSID {B2794EF6-C0B6-11D0-939C-0020AF68E893} failed due to the following error: 80040154 class not registered (Exception from HRESULT: 0 x 80040154 (REGDB_E_CLASSNOTREG)).
  Source = NationalInstruments.TestStand.Utility
  ErrorCode =-2147221164
  StackTrace:
  at NationalInstruments.TestStand.Utility.LaunchTestStandApplicationInNewDomain.LaunchHelper (point of entry MainEntryPointDelegate, MainEntryPointDelegateWithArgs entryPointWithArgs, String [] args)
  at NationalInstruments.TestStand.Utility.LaunchTestStandApplicationInNewDomain.Launch (point of entry MainEntryPointDelegateWithArgs, String [] args)
  at TestExec.MainForm.Main (String [] args) in c:\Users\Public\Documents\National Instruments\TestStand 2014 (32-bit) \Examples\Modifying User Interfaces\Handling UI Messages\DotNet\MainForm.cs:line 284
  InnerException:

  I tried restarting the PC and also reinstall TestStand 2014 but still not the same error.  I can, however, run the sequence editor and run sequences that without errors.

  I am that running on a Windows 7 64-bit installation and execution of the interface Visual Studio 2012 runtime solution.  Any ideas on what else to try?

  Kind regards

  David

  Hi David,

  Sorry to hear you're having trouble to get examples of the user interface to work.  A few questions to get a better idea of what is happening:

  1. If you have TestStand 32-bit installed only, ensure that the platform selected for the solution of the example is x 86, and then rebuild the solution.

  2. the example of the simple User Interface gives the same error?  ("\UserInterfaces\Full-Featured\CSharp\TestExec.sln")

  3. If you run the version selector TestStand and select this option to activate TestStand 2014 (even if it is already active), do you get any errors?  The example gives the same error after this step?

  4. If you have Visual Studio 2010 installed, please test this version as well because it's the version in that the examples have been developed.

• Operator Interface labview and teststand back the call for promotion of status sequential

  Hello

  I am looking for a solution to be able to take by the API Testand 'call sequence' status key of my teststand sequence.

  The idea is to combine, on my operator labview interface a specific indicator pour each call sequence 'important '.

  Example: an indicator to test consumers, another for power supply, an another SoftComm ex but not pour tests under

  The first solution that comes to me and inspired by what I could find on this forum is the utilistion method PostUIMessageEx en post expression for each call sequence don't I want to get the result.

  I find this solution satisfactory sector a bit heavy and a little too dependent on the test sequence she herself.

  Other solutions of would they?

  Please pour your contributions

  Hello

  In general, I get the UIMessage TraceCallback. So based on the name of the step (say consolidated test for example) I can do whatever I want since LabVIEW update my GUI without having to change the TestStand sequences.

  Kind regards

• How to go from result of step of TS engine at the operator Interface?

  Hi, dear ALL

  I am a newbie in TestStand and I have a problem... A lot of documentation and manuals, but there is no clear answer = (could you please help me.

  Suppose we have a sequence with a step of success/failure. Now, I want to use my own operator instead of the sequence editor Interface to run my sequence. To the best of my knowledge, the TS engine will update Step.Result.Status property. I want to get this status and use it in my IO. How the engine works TS transfer the result of the step to the IO (or the sequence editor)? I read on user interface messages. TS engine automatically sends a special Message from UI?

  Thanks in advance,

  Max

  maksya wrote:
  [...] TS engine automatically sends a special Message from UI?

  Thanks in advance,

  Max

  No, there are no special UI for this Message.

  What you can do is to define your own customized for that user interface Message. Take a look on the TestStand reference manual page 3-15. You will find an array of components of step ordered by the execution. You can see that action no. 17 is the execution of the expression of the State. From that moment, the step should have its result. Therefore, you can use the step callback after engine (action no. 18) to send your Message to the custom user interface.  Another possible recall would be the recall of motor PostResultListEntry (action no. 32), which is the last point to transfer information.

  Regardless of the above info: why don't you use the SequenceView element and simply expel everything except the name of the step and the result column?

  hope this helps,

  Norbert

• No access to the interface of the ASA by behind the other is

  Hello

  I am faced with the issue of not being able to access the interface of "dmz" behind the interface 'internet '.

  Here is a brief description of the topology:

  

  List entry on the internet access "," allows for 1xx.xxx.172.1 traffic.

  No nat is configured between these interfaces.

  The routing is OK because hosts on the DMZ network are accessible from the Internet.

  The software version is 9.1 (3).

  Security level of the interfaces is the same.

  Security-same interface inter traffic is allowed.

  Here's what packet trace says:

  tracer # package - entry internet udp 7x.xxx.224.140 30467 1xx.xxx.172.1 det 500

  Phase: 1
  Type:-ROUTE SEARCH
  Subtype: entry
  Result: ALLOW
  Config:
  Additional information:
  identity of the 255.255.255.255 1xx.xxx.172.1

  Phase: 2
  Type:-ROUTE SEARCH
  Subtype: entry
  Result: ALLOW
  Config:
  Additional information:
  identity of the 255.255.255.255 1xx.xxx.172.1

  Result:
  input interface: internet
  entry status: to the top
  entry-line-status: to the top
  the output interface: NP identity Ifc
  the status of the output: to the top
  output-line-status: to the top
  Action: drop
  Drop-reason: (headwall) No. road to host

  Please help me find the cause why asa is unable to find the path to its own interface.

  Thank you in advance.

  Hello

  You will not be able to connect to an IP address of an interface ASA behind another ASA interface. It is a limit that has been there for Cisco firewalls as long as I can remember.

  The only exception is when you have a VPN connection that is connected to an ASA interface, then you can connect through this VPN connection to another interface of the ASA. In this case the ASA will also require that you have the following command

  access to the administration

  Where is the name of the interface to which you are connected.

  -Jouni