Access to the Bi Publisher - Urgent error

Similar Questions

• No access to the DVD drive - 38 error code

  Update Driver published 07/07/08 to 23:59 has been installed on my system as made by Toshiba Tempo but rebooting my machine, I get error 38 (according to Vista) that prevents the new driver installation as the old pilot is resident in memory... ?? Effectively, this means that I can't access or see my DVD player more in other ways than in the page Manager devices Control Panel. Option driver restore is not available, perhaps because it was an update of the firmware. The message on the device properties page is as follows:

  Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)

  The installed updatre was frmwre-20080707134447. It includes an Adobe document that tells you what to do and how to ensure that your drive needs to be refreshed, which was easy to follow and loose my machine.

  I tried to uninstall the device and the driver, but whenever I have to reload the same error occurs.

  I'm really impressed and quite embarrassed, because it is a recommended Toshiba firmware update done using their system of Tempo, ideas or advice welcome.

  Thank you

  Matt

  Hello

  Do you see a CD/DVD drive in Device Manager?
  If so, then remove it from the list of devices.

  Then access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Finally restart the laptop and check if the CD/DVD drive would still be functions

  Further details can be found here:
  http://support.Microsoft.com/kb/270008/en-us

• Rights of access to the BI Publisher 10g and 11g migrate reports

  Hi all

  I've migrated BI Publisher reports in 10G in the middle of 11 G environment. I installed both applications in local machine, to carry out this activity. Post, I moved a folder containing few reports (.xdo and .xdm) in OBIEE 11g environment installed in Linux environment.

  Report units are visible, but .xdo cannot be performed. I get the error on execution it below.

  "oracle.xdo.servlet.CreateException: oracle.xdo.servlet.CreateException: oracle.xdo.servlet.CreateException: oracle.xdo.servlet.CreateException: definition of data model not found: / report of Performance of the Bank-like of.xdm". "

  In addition, I don't have the access rights to change the datamodel (xdm) and report (xdo)

  I'm stuck with this problem for a few days and could not get much help from the available discussions.

  Thanks in advance

  Prasanna

  Hello

  I was able to retain the rights administrative everything on the new catalogue by doing the steps below

  1 run a fresh upgrade with destination as a separate folder (D:/dest) and not selecting "{BI_DOMAIN}... repository/bi_publisher /'."

  2 created a new catalog of presentation by specifying the path of the catalog in em ' in a new folder.

  3. copy the units OBI EE (file and files problemcs), upgraded in the shared folder in the folder newly created by Ms.

  4. go in BI Publisher 11 g-> Administration. Navigate to the directory of BI Publisher and point to the destination folder would be: / dest' and run 'Upload to the BI presentation catalog.

  5. now, all units are available in a shared folder with full rights for the user "weblogic.

  Concerning

  Prasanna

• Access to the applications of R12 error

  Hello
  EBS 12.0.4
  DB 10.2.0.3
  
  A particular user is not able to get the page of connection of EBS test1 (cannot display page), but able to get EBS login page on the other asks to test2 that is installed on the same server. Other users are able to connect to test1. Verified the intellectual property entry in etc/hosts, they are all ok, cleared cache on the client side. Can someone let me know how to get the question of evil.
  
  Thanks in advance

  If you can access other servers on the same machine and you can access this specific instance of other machines, it is nothing to do with the application and it is a question of specific machine.

  Please delete the browser cache and history and then check. And, if possible, use a different browser and test.

  Thank you
  Hussein

• AppPortal error: remote access to the server is not enabled

  I'm lost on this one.

  Using the full client of AppPortal on a Win7 64 bit machine (version 8.0 of the customer)

  Double-click the icon, download authenticated - published applications show, then double click a published application, the end user receives:

  Remote access to the server is not enabled.

  This happens only on a single computer

  From this profile of users on the given computer I can MSTSC on the same server without problem

  The error also follows the profiles on the given computer.

  I have closed the Antivirus and Windows Firewall and still can not get this to work.

  Even uninstalled and reinstalled the client.

  From my computer, I can easily log in as this user.

  Customers get automatically configured through an XML file.

  After installation, I tested this laptop and he always gave the same error.

  I ended up him to give me the phone for a few hours.

  Uninstalled the version that was there (build 8.0.0.forget) and scoured the Windows Explorer for all left overs (a little here and there in user profiles and delete).

  Then scoured the registry for expressions; vWorkspace, Quest Software and Provision Networks and remove all instances

  Reinstalled all THE SUCCESS with the new connector to our servers (8.0.306.1427)

  Thanks for the help Dave

• If I sell my iPhone 6, indicating the error 53, for parts, should I worry about the person buying it have some sort of access to the personal data registered on this phone?

  If I sell my iPhone 6, indicating the error 53, for parts, should I worry about the person buying it have some sort of access to the personal data registered on this phone?

  Hello error 53 matched a UN failure to the home button you had to replace the screen or the home button alone or outside apple store so if you replace the button man of origin and you restored the iPhone error will be fixed but if you sell the buyer has no access to the data of the iPhone

• Access to the Windows Update site 0x8024402C error code failed?

  Access to the Windows Update site 0x8024402C error code failed? Regds, 'a journey of a thousand miles begins with a first step."

  Resolution: 0x8024402C error Code

  Method 1: Remove the characters from the list of exceptions to the proxy and then clear the proxy cache to do this, follow these steps, as appropriate for the operating system that you are running. Windows 2000, Windows XP and Windows Server 2003

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.

     Note If the menu is not available in the Internet Explorer window, press the ALT on the keyboard to display the menu.

  3. Click the Connections tab and click LAN settings, and then click Advanced.
  4. Remove all the entries in the Exceptions section, and then click OK.
  5. Close Internet Explorer.
  6. Click Start, run, type cmd, and then click OK.
  7. Type the following commands. Press ENTER after each command.
     • proxycfg d
     • net stop wuauserv
     • net start wuauserv
  8. Try again to install updates.

  Windows Vista and Windows Server 2008

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.

     Note If the menu is not available in the Internet Explorer window, press the ALT on the keyboard to display the menu.

  3. On the Connections tab, click LAN settings, and then click Advanced.
  4. Remove all the entries in the Exceptions section, and then click OK.
  5. Close Internet Explorer.
  6. Click Start
     The collapse of this image enlarge this image

     

     , and then type cmd in the box start the search.

  7. In the list of search results, right-click on Cmd.exe, and then click Run as administrator.
     The collapse of this image enlarge this image

     

     If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  8. Type the following commands. Press ENTER after each command.
     • netsh winhttp reset proxy
     • net stop wuauserv
     • net start wuauserv
  9. Try again to install updates.
   

  Method 2: Enable the option "Automatically detect connection settings" in Internet Explorer to do this, follow these steps:

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.

     Note If the Tools menu is not available in Internet Explorer, press the ALT key to display the menu.

  3. On the Connections tab, click LAN settings.
  4. Click to select her automatically detect settings check box, and then click OK.
  5. Try to install updates again.

  Kind regards
  Sohail Patel Regds, 'a journey of a thousand miles begins with a first step."

• We get an error "NETWORK CONNECTION ERROR, make sure a firewall is not blocking access to the printer.

  * Original title: printer error...

  I was printing with a printer wireless for months and now all of a sudden I'm getting an error, NETWORK CONNECTION ERROR and then readings make sure that a firewall is not blocking access to the printer.   I checked and it is not blocked...  I did a session of disorder and it reads no problems found.   Can someone please...

  Hello

  1. what version of Windows is installed on the computer?

  2. What is the brand and model of the printer?

  3. you have any non-Microsoft firewall installed on the computer?

  4. what security software is installed on the computer?

  5 have have there been recent changes made on the computer before the show?

  Please follow the steps below and check if that helps.

  Method 1: Run troubleshooting network printer and check.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Method 2: Select the file and printer sharing

  http://Windows.Microsoft.com/en-us/Windows-Vista/enable-file-and-printer-sharing

  Method 3: I suggest to change firewall security settings, or disable the security software on the system and try to access the printer.

  Note: make sure that you enable the antivirus software, other security and firewall after the test programs.

  For more information, see the articles and check out them.

  Understanding Windows Firewall settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/Understanding-Windows-Firewall-settings

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Allow a program to communicate through Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/allow-a-program-to-communicate-through-Windows-Firewall

  Let us know if it helps!

• Error: 0 x 80070005 access denied: the requested action requires elevated privileges.

  I downloaded and install a copy of assessment of RC of windows 7 build 7100 and use the key to legitimate windows 7 RC to activate and he succeeded.

  After a few days, my pc hangs and after reset, he began asking to activate windows now. Although pressing ok product error '0x80070005' (I am using the administrator account). Even using the command "slmgr.vbs" does not display ' error: 0 x 80070005 access denied: the requested action requires elevated privileges. "

  Please help and thank you.

  Your question has nothing to do with Windows Update (compared to the upgrade of Windows). Please repost your question here rather: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Failed to start service Windows Firewall/Internet Connection Sharing (ICS) on the local computer. Error 5: access is denied. »

  original title: error 5 access denied firewall

  Failed to start service Windows Firewall/Internet Connection Sharing (ICS) on the local computer. Error 5: access is denied. »

  Hi vipin sharmavg,.

  1. did you of recent changes on the computer?

  2. do you have security software installed on the computer?

  See the below Microsoft article and try the steps mentioned, check if it helps.

  You cannot start the Windows Firewall service in Windows XP SP2

  http://support.Microsoft.com/kb/920074

• I have a problem of access to the Outlook account and other pages because appears "certificate error" what's happened with these certificates?

  I have a problem of access to the Outlook account and other pages because appears "certificate error" what's happened with these certificates? Help please.

  There are two main reasons for the mistakes of certificate:

  1. Your computer's time is not set correctly.  Check your time year/month/day/hour/minute/timezone/light of day.  Right-click on the clock in your taskbar and select "set Date/time" and make sure you are ready approximately 5 minutes of real time (don't forget time zone and DST).
  2. The second reason is that Windows XP is not very good for updating root certificates.  Go to the following site:
        <>http://support.Microsoft.com/kb/931125 >
     and go down to the section:
     'Update Package root (designed for Windows XP only)'
     There is a link, you can use to download a update for your root certificates package.  Download this package and double-click it to update.

  HTH,

  JW

• 5 d Mark III to access the (compact flash) card error

  I just got a Canon 5 d mark III and having problems with it access to the card compact flash. This has happened on 4 different cards all gig Lexar professional 32 X 1000. I have a Canon 7 d and the cards work fine in it. All the cards have been formatted by the 5 d Mark III before using. It seems sometimes they work and other times it won't.

  Hi cuda719!

  Thanks for posting.

  It is certainly unusual, but not after testing all the cards on the market, it is difficult to ensure that all the same cards will work with all cameras.  To isolate the problem to the cards or the camera, try to use another card which is not identical to the 4, that you used.  If the camera is still the error with the spare card, it must be repaired.

  To start the repair process, you need to fill out a service request on our Web site.

  This does not solve your problem? Find more help contact us.

• Access to the Internet and get a "atl100.dll" error when you try to use Firefox

  I just reinstalled Vista Home Premium and everything was going well for two days, but I can not access the internet regardless of the browser that I use and when I open Firefox, I got an error of "atl100.dll", I am afraid that my files cd, especially the .dll files can be altered, where can I find a good (and costs nothing) copy of the file atl100.dll? Please help as soon as possible. Thank you!!

  Original title: Re-installed Vista Home Premium and cannot access the internet & get a "atl100.dll" error when trying to use Firefox and IE just is not access to the internet either

  Hello

  1 did you changes to the computer before the show?

  2. What is the full error message?

  3. who is the antivirus installed on the computer program?

  4 are you using wired or Wi - Fi to access the Internet?

  5. What is the version of Internet Explorer installed on the computer?

  The possible causes:

  • ATL100.dll file is missing, as it was accidentally deleted from your computer
  • ATL100.dll file is damaged by viruses and your computer cannot access the file.
  • ATL100.dll associated with registry files is corrupt and obsolete.

  Perform the steps:

  Method 1: Perform a SFC scan on your computer to fix the corrupt dll files.

  Reference:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2: Run a scan antivirus on your computer.

  www.Microsoft.com/Security/Scanner

  Note: If infections are detected during the scan, there is a risk of data loss because infected files will be deleted.

  Method 2: Reset of internet explore and check. (If you use Internet Explorer)

  How to reset Internet Explorer settings

  http://support.Microsoft.com/kb/923737

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  For more information, see the links:

  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  I hope this helps.

• Internal system error prevents access to the HP Deskjet 3052 a https pages

  Currently, I am able to print and access to my printer HP Deskjet 3052 (3050 has). However, it is limited to all pages that use http. As soon as I select those that passed to https, I get a system error "internal" although I accept the exception for the security certificate.

  This happens with IE, FF and Chrome.

  The printer works on an IP fixe.251, which I was able to select.

  What should I do? How can I get any useful information? The HP network audit tool show nothing of concern.

  Security certificate exceptions work quite well when tested.

  I tried to start by https://xxx.xxx.xxx.xxx. The system of interal error was immediately. However, pressing on charge 2 - 3 times that brings me to the homepage then. Select the pages running because of problems before then.

  Summarizing my I would say:

  Work around: Application to reload your browser several times brings you the solution.

  Customer satisfaction: low, because it is not acceptable for the product. The assistance provided by the customer support, which I approached at the same time, said gently unacceptable. They were very sensitive, however, they wanted me to send a log file which contained tons of relevant data from my system's security, it is not acceptable at all. It was the time were I stopped working with them and was happy to find a workaround in this forum.

• Error when you try to play audio files: Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer where the file is stored

  Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be incorrect.

  I hope someone can help on Win 7 64 bit, music is taken on a disk usb2 external hard... I had no problem until today when the message in the title appeared next to each track, with a little red cross.

  I already deleted database library as suggested by some of the forums, also disabled the media as a feature of Win 7, rebooted and then re-enabled it.  I also disconnected externally and restarted that as well, I'm also the same mistake with a cd in the cd drive as well.

  Can anyone help?

  Hello

  This error may occur for one of the following reasons:
  The file is currently in use. Close the file and then try again.

  You are not allowed to access the location where the file is stored.

  Follow these steps to grant all permissions in the folder where the files are stored:
  1. right click on the folder on the external drive and click Properties.
  2. in the Properties window, click on Security tab.
  3. now, click Edit , and then click Add.
  4. now, type everyone in the box and click OK.
  5. check the full control box.
  6. click on apply and then click OK.

  You can also try the mentioned below as follows:

  1. click on start.
  2. go in Control Panel.
  3. Select "SOUND".
  4. double-click on speakers.
  5. click on the tab advanced and then uncheck the enable audio enhancements.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.